FCC ID: YE3600-AX200NG RUGGED TABLET

Medical Micro PC 139CS INTRODUCTION Thank you for acquiring the latest addition to DT Researchs line of Medical Micro PC - the 139CS, featuring compact, robust construction powered by the high-performance and energy efficient Intel processor. The 139CS supports Microsoft Windows or Ubuntu operating system and provides complete solutions for a variety of computing needs. The user is offered a choice of software solutions on a platform characterized by the following:

High-integration and energy-efficient processor technology Expanded graphics capabilities for multimedia applications Robust construction for reliable operation PACKAGE CONTENTS 139CS AC-DC power adapter with power cord Basic operation guide DT Research, Inc. 2000 Concourse Drive, San Jose, CA 95131 Copyright 2021, DT Research, Inc. All Rights Reserved. BOG 050521 139CS ENG PRECAUTIONS Always exercise care when operating and handling the 139CS. Never disassemble any portion of the enclosure. It will void any product warranty on the 139CS. Do not use any AC/DC adapter other than the one provided with the device or acquired from the manufacturer or its partners. In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power down the 139CS and disconnect all power sources. Please report the problem to your device provider immediately. Powering ON and OFF The Power Button is located on the front of the 139CS. The Power Button may be configured to function differently depending on the power options of the operating system. In general, to turn the 139CS on, push and release the Power Button on the front bezel. The power LED will be lit

(blue) and the corresponding interface will be displayed on the display monitor. To turn off the device, again depending on software operating system, push and release the Power Button or use a software shutdown interface. In the event of system lockup, the Power Button may be used to perform a reset on the device. To do that, push and hold the Power Button for at least 4 seconds. The system will shut down and all unsaved work may be lost. Pushing on the Power Button again will restart the device. Back Device Ports Front A B C D E I A Power Button B Audio Jack C USB 3.0 Port D HDMI E DisplayPort F COM Port (RS232) G Ethernet H DC-in I Wi-Fi dipole antenna

(optional) F I G C H The 139CS features an optimal set of I/O ports while preserving the compact size of the system. The video-out connectors, network (10/100/1000 BaseT Ethernet), COM ports, and power ports are supplemented by USB and audio ports. Through its USB ports, the 139CS supports a wide range of USB-based peripherals. These peripherals are applicable in providing the means for software installation, application storage, data storage, and system software recovery and updates. Wireless Networking Wireless LAN The Medical-Cart Computer is often delivered with an embedded (user-inaccessible) 802.11ax WLAN adapter equipped with a hidden custom antenna. Through the support of typical WLAN adapters, the Medical-Grade Integrated LCD System should be able to detect all 802.11 access points in the vicinity for you to select the access point of your choice for connection. The SSID and WEP/WPA/WPA2 (if enabled) parameters on the Medical-Grade Integrated LCD System and the access points have to match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access. When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your networking equipment literature to properly congure associated settings such as Authentication mode, etc. Refer to the access point operating manuals for setting up the 802.11 access points. Bluetooth The Medical-Cart Computer features a built-in Bluetooth adapter that operates on the Microsoft Windows Bluetooth protocol. The Bluetooth conguration application is invoked from the System Tray or from the Control Panel. Follow the instructions and options provided within the applica-

tion to congure and invoke Bluetooth connectivity with the corresponding peripherals. NOTE:

Bluetooth devices or accessories that are not compatible with the Microsoft Windows Bluetooth protocol may not work with the devices. NOTE:

Avoid using the Power Button (hold 4+ seconds feature) to turn off the devicethis form of hardware shutdown is intended to be a means of recovery from device lockups, and not as normal operation. 2 3 Federal Communication Commission Interference Unique Identifier Trade Name:

Model No.: 139CS Responsible Party U.S. Contact Information DT Research, Inc. 2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe [B] est conforme la norme NMB-003 du Canada. RF Exposure Compliance To maintain compliance with FCCs RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body:

Use only the supplied antenna. Supplier's Declaration of Conformity 47 CFR 2.1077 Compliance Information 2 3 RF Exposure Information(RED) To be protected against all verified adverse effects, the separation distance of at least 0.2m must be maintained between the antenna of the radio having max. 5.22dBi antenna and all persons. The band 5150-5350 MHz for this device are restricted to indoor use only within all European Union countries. Hereby, [DT Research, Inc.] declares that the radio equipment type [139CS] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.dtresearch.com. Maximum EIRP for EU Bluetooth:2402MHz-2480MHz Bluetooth LE:2402MHz-2480MHz Wifi: 2412MHz-2472MHz/2422MHz-

2462MHz Wifi: 5150MHz-5725MHz Wifi: 5725MHz-5875MHz 14.4dBm 2.42dBm 20dBm 22.9dBm 13.9dBm Canada

- English:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

- French:

Le present appareilest conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. To maintain compliance with RSSs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. Pour rester conforme aux directives d'exposition aux radiofrquences de RSS, cet quipement doit tre install et utilis une distance minimale de 20 cm du radiateur de votre corps :

Utilisez uniquement l'antenne fournie. 1. the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

2. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;

3. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; and 4. where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated. 1. le dispositif utilis dans la bande 5150-5250 MHz est rserv une utilisation en intrieur afin de rduire le risque de brouillage prjudiciable aux systmes mobiles par satellite dans le mme canal;

2. pour les dispositifs antenne (s) dtachable (s), le gain d'antenne maximal autoris pour les dispositifs dans les bandes 5250-5350 MHz et 5470-5725 MHz doit tre tel que l'quipement soit toujours conforme la norme e.i.r.p. limite;

3. pour les dispositifs antenne (s) dtachable (s), le gain d'antenne maximal autoris pour les dispositifs de la bande 5725-5850 MHz doit tre tel que l'quipement soit toujours conforme la norme e.i.r.p. les limites, le cas chant; et 4. le cas chant, le (s) type (s) d'antenne, le (s) modle (s) d'antenne et l'angle (s) d'inclinaison le plus dfavorable ncessaire (s) pour rester conforme (e) au p.e. L'exigence relative au masque d'lvation nonce la section 6.2.2.3 doit tre clairement indique.

Rugged Tablet DT382GL INTRODUCTION The DT Research DT382GL Rugged Tablet features the integration of a high brightness 8 capacitive touch screen and a high performance yet energy efficient processor within a slim, lightweight, durable package. With built-in Wi-Fi and a smart card reader as well as options for back camera, barcode scanner, GNSS, this robust tablet offers seamless information capture and transmission for improved workflow. Rated IP65 and MIL-STD-810G, the DT382GL Rugged Tablet provides reliable operation in harsh, mission-critical environments. PACKAGE CONTENTS One DT382GL One Battery Pack and Handstrap AC-DC Power Adapter Basic Operation Guide DT Research, Inc. 2000 Concourse Drive, San Jose, CA 95131 Copyright 2023, DT Research, Inc. All Rights Reserved. BOG033023 DT382GL ENG

* The actual package contents may vary depending on the configuration acquired. This is a generic version of the manual;

The DT382GL Battery/ Power LED B C D A PRECAUTIONS Always exercise care when operating and handling the DT382GL Do not disassemble any portion of the DT382GL, as this will void any product warranty. Do not use any power adapter or charging cradle other than the one provided with the tablet or acquired from the manufacturer or its partners. In the unlikely event that abnormal noise, strange odor, or smoke is present, immediately power down the DT382GL and disconnect all power sources. Please report the problem to your device provider immediately. OPERATION Powering ON and OFF E F To activate DT382GL, push and quickly release the Power Button. The display will come on in a few seconds. To put the DT382GL in standby mode, push and quickly release the Power Button. To turn the DT382GL off for extended storage, power off safely using any software function that shuts down computer provided in the software operating system. NOTE:

The battery packs shipped with your tablet may be low in power - please use the AC-DC adapter with the DT382GL when setting up for the first time to fully charge the battery pack. NOTE:

To conserve power, push and quick release the Power Button to make the tablet in standby mode while not in use. Pushing briefly on the same butt on will wake up the system. NOTE:

When the battery pack is charging, the blue-colored Battery LED should blink slowly. If plugging in the AC-DC adapter does not trigger this blinking activity and the LED stays dark, the battery pack(s) may have been drained substantially. Unplug/replug the AC-DC adapter to the DT382GL a few times to activate the charging process. NOTE:

Avoid using the Power Button (hold 4+ seconds feature) to turn off the tabletthis form of hardware shutdown is intended to be a means of recovery from lockups, and not as normal operation. Input/Output Ports Button Functions A USB Type-C Port (power input) BUTTON ACTION B Audio Jack C USB Port Data Capture Modules D E F Smart Card Reader Barcode Scanner (optional) Back Camera (optional) 1 2 3 4 5 6 Power Button Windows Key Button Programmable Buttons Brightness Control Buttons RFID Reader Trigger Button/

Programmable Button Barcode Scanner Trigger Button/

Programmable Button 2 3 UHF RFID Reader:

The optional UHF RFID reader supports EPC Gen2V2 and ISO 18000-63 standard. To develop an application to use the UHF RFID reader, contact your device provider for a UHF RFID reader API package NOTE:

To ensure the system performance, turn on only the symbologies you are going to use. For More Support Users can download the Tablet Modules Basic Operation Guides from the DT Research website. If the power up (from Standby mode or otherwise) is successful, the appropriate interface will be displayed after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be established. Wireless Networking Wireless LAN The DT382GL is often delivered with an embedded (user-inaccessible) 802.11ac LAN adapter equipped with a hidden custom antenna. Through the support of typical WLAN adapters, the DT382GL should be able to detect all 802.11 access points in the vicinity for you to select the access point of your choice for connection. The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT382GL and the access points have to match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access. When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your networking equipment literature to properly configure associated settings such as Authentication mode, etc. Refer to the access point operating manuals for setting up the 802.11 access points. Bluetooth The DT382GL oers the Bluetooth module which supports Bluetooth 5.0 standard including Bluetooth 3.0 High Speed and Bluetooth 4.0 Low Energy, which delivers faster speeds with low power consumption. Data Capture Module Operation Guide If your DT382GL comes with an RFID Reader refer to the steps below to configure the settings. 4 5 The optional pole/vehicle mount cradle can be used to secure a DT382GL tablet in a vehicle or forklift for easy and stable operation. Installation The DT382GL rugged tablet is a purpose-built stationary tablet to be installed on a pole/vehicle mount cradle with a stand to provide enhanced mobility and user experience. The DT382GL rugged tablet is designed to serve as a floor control unit to work with the users advanced security screening system. The hot- swappable battery design allows the control units to be installed virtually anywhere while eliminating the hassles and need for power outlets and network cabling. The use of a battery power tablet allows the customers advanced screening systems to be installed in a specific venues while providing extended working time for enhanced productivity, which in turn reduces system downtimes for optimised user experience when going through security checkpoints. The 8 display provides clear information for security staff to effortlessly monitor the screening systems, while the pole/vehicle mount cradle provides stable operation for a higher level of safety while being used on site while eliminating the risk of accidental removal or theft. To mount a DT382GL tablet onto the pole/vehicle mount cradle:

Step 1. Step 2. Place the DT382G tablet beside the pole/vehicle mount cradle. Pull the upper clamp of the pole/vehicle mount cradle to widen the space for mounting the tablet. Step 3. Step 4. Place the DT382GL tablet in the mounting space of the pole/ vehicle mount cradle. Release the upper clamp to secure the tablet in place. Note: Due to the size and weight, DT382GL needs to be installed on cradle with stand to work as floor control unit. Do not use DT382GL while holding it by hand. Shutdown DT382GL between each usage or when moving the control stand to prevent any risk of damage. 4 5 RF Exposure Information (RED & UKCA) To be protected against all verified adverse effects, the separation distance of at least 200mm must be maintained between the antenna of the radio having max. 10dBi antenna and all persons. Hereby, [DT Research, Inc.] declares that the radio equipment type [DT382GL] is in compliance with Directive 2014/53/EU and UK Radio Equipment Regulations 2017. The full text of the EU and UK declaration of conformity is available at the following internet address: http://www.dtresearch.com. The functions of Wireless Access Systems including Radio Local Area Networks(WAS/RLANs) within the band 5150-5350 MHz for this device are restricted to indoor use only within all European Union countries (BE/BG/CZ/DK/DE/EE/IE/EL/ES/FR/HR/ IT/CY/LV/LT/LU/HU/MT/NL/AT/PL/PT/RO/SI/SK/FI/SE/TR/N O/CH/IS/LI/UK(NI). Maximum EIRP for EU Bluetooth:2402MHz-2480MHz Bluetooth LE:2402MHz-2480MHz Wifi: 2412MHz-2472MHz/2422MHz-2462MHz Wifi: 5150MHz-5725MHz Wifi: 5725MHz-5875MHz LTE Band 1: 1920-1980MHz/2110-2170MHz LTE Band 3: 1710-1785MHz/1805-1880MHz LTE Band 7: 2500-2570MHz/2620-2690MHz LTE Band 8: 880-915MHz/925-960MHz LTE Band 20: 832-862MHz/791-821MHz LTE Band 28: 703-748MHz/758-803MHz 17.49dBm 8.87dBm 18.76dBm 18.47dBm 13.81dBm 24dBm 24dBm 23dBm 24dBm 24dBm 24dBm This equipment complies with Directive 2014/53/EU and UK Radio Equipment Regulations 2017 radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by European Union market(France). These requirements set a SAR limit of 2W/kg averaged over 10 gram of tissue. The highest SAR value 1.921 W/kg reported under this standard during product certification for use when properly worn on the body. The equipment has been tested with radios set to their highest transmission levels with following setup:

Mode use against the head worn or carried against the torso of the body Worn on limbs Separation SAR Value

0 mm 1.921 W/kg

Sar Limit 2W/kg (over 10 g) 2W/kg (over 10 g) 4W/kg (over 10 g) Body-worn accessories (e.g., carry case, belt clip) containing metallic components which has not been tested or certified may change the RF performance of the device, including its compliance with RF exposure. User shall avoid using such accessories and should operate at least the above stated separation distance to maintain RF exposure compliance. 6 7 Operating authorizations must exist to operate the product in the following member states of the European Union, refer to the table below. Importer Name: Concept International GmbH Importer Address: Zweibrckenstr. 5-7 80331 Mnchen Germany Federal Communication Commission Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. RF Exposure Compliance This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the FCC. These requirements set a SAR limit of 1.6 W/kg averaged over 1 gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body, with 0mm separation. FCC ID Label is in removable battery compartment, it could be easily found by removing the battery cover. Supplier's Declaration of Conformity 47 CFR 2.1077 Compliance Information Unique Identifier Trade Name:

Model No.: DT382GL Responsible Party U.S. Contact Information DT Research, Inc. 2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com 6 7 IC Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe [B] est conforme la norme NMB-003 du Canada. RF Exposure Compliance This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over 1 gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body, with 0mm separation. Cet quipement est conforme aux limites dexposition aux rayonnements ISED tablies pour un environnement non contrl. Lutilisateur final doit suivre les instructions spcifiques pour satisfaire les normes. Cet metteur ne doit pas tre co-implant ou fonctionner en conjonction avec toute autre antenne ou transmetteur. Le dispositif portatif est conu pour rpondre aux exigences dexposition aux ondes radio tablie par le dveloppement nergtique DURABLE. Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus leve signale en vertu de cette norme lors de la certification de produit utiliser lorsquil est correctement port sur le corps, avec une sparation de 0mm. The functions of Wireless Access Systems including Radio Local Area Networks(WAS/RLANs) within the band 5150-5250 MHz for this device are restricted to indoor use only. Les fonctions des systmes d'accs sans fil, y compris les rseaux locaux radiolectriques (WAS/RLAN), dans la bande 5150-5250 MHz de cet appareil sont limites une utilisation en intrieur. 6 7

Justification of Label Location Regarding: Label Location of Rugged Convertible Laptop, Contains FCC ID: YE3600-AX200NG We, DT Research, Inc., hereby declare that the label of the equipment will not be visible at the time of purchase on the exterior of the equipment enclosure. Per KDB 784748 D01 Labelling Part 15 &18 Guidelines v08, we use an alternative option to placing the FCC label on the device, all requirements as below are met:

Requirements The device is handheld;

The FCC identifier is visible at the time of purchase. The FCC ID on the box, or additional documentation directing the user where to find the FCC label, also satisfies this requirement;

The user accessible area must not require any special tools for access, and the FCC label must not be placed on a removable part;

Justification Yes, its a portable tablet. Instruction to user where to find the FCC label is properly addressed in the User Manual. Its on the battery compartment, the compartment is not removable; the battery could be easily and normally removed without any special tools so FCC ID Label could be is easily assessed. Print Name: JS Hsu Title: Manager Signature:

On behalf of Company: DT Research, Inc. Telephone: 886-2-2298-1039 ext. 309 E-mail: js_hsu@dtri.com 1 2 3

DT Research, Inc. Taiwan Branch DIM: MM (INCH) PART NAME Label Location DT311CY UNIT MM TOL UNLESS NOTED PART NO. X 0.1

.XX 0.1 ANGLE 0.1 MATERIAL 8B35 t= 0.254 DWG. NO. DT311CY LB24L DATE: 06/10/20

REV:00 SH:1/1 APPROVE DESIGN DRAWN Wing SCALE 1:1 DON'T SCALE DRAWING

Justification of Label Location Regarding: Label Location of Rugged Convertible Laptop, Contains FCC ID: YE3600-AX200NG We, DT Research, Inc., hereby declare that the label of the equipment will not be visible at the time of purchase on the exterior of the equipment enclosure. Per KDB 784748 D01 Labelling Part 15 &18 Guidelines v08, we use an alternative option to placing the FCC label on the device, all requirements as below are met:

Requirements The device is handheld;

The FCC identifier is visible at the time of purchase. The FCC ID on the box, or additional documentation directing the user where to find the FCC label, also satisfies this requirement;

The user accessible area must not require any special tools for access, and the FCC label must not be placed on a removable part;

Justification Yes, its a portable tablet. Instruction to user where to find the FCC label is properly addressed in the User Manual. Its on the battery compartment, the compartment is not removable; the battery could be easily and normally removed without any special tools so FCC ID Label could be is easily assessed. Print Name: JS Hsu Title: Manager Signature:

On behalf of Company: DT Research, Inc. Telephone: 886-2-2298-1039 ext. 309 E-mail: js_hsu@dtri.com 1 2 3

DT Research, lnc. DT Research, lnc. San Jose, CA 95131, USA San Jose, CA 95131, USA www.dtresearch.com www.dtresearch.com Product Name: Rugged Convertible Laptop Product Name: Rugged Convertible Laptop Model No.: LT330 Model No.: LT330 Input: 19V 3.42A Input: 19V 3.42A Imprint Concept International GmbH Contains FCC ID: YE3600-AX200NG Assembled in Taiwan Zweibrckenstr. 5-7 80331 Mnchen Germany Contains FCC ID: YE3600-AX200NG Assembled in Taiwan DT Research, lnc. San Jose, CA 95131, USA www.dtresearch.com Product Name: Rugged Convertible Laptop Model No.: LT330 Input: 20V 3.25A Imprint Concept International GmbH Zweibrckenstr. 5-7 80331 Mnchen Germany Contains FCC ID: YE3600-AX200NG Assembled in Taiwan DT Research, lnc. San Jose, CA 95131, USA www.dtresearch.com Product Name: Rugged Convertible Laptop Model No.: LT330 Input: 20V 3.25A DT Research, lnc. DT Research, lnc. San Jose, CA 95131, USA San Jose, CA 95131, USA www.dtresearch.com www.dtresearch.com Product Name: Rugged Convertible Laptop Product Name: Rugged Convertible Laptop Model No.: LT330 Model No.: LT330 Input: 19V 3.42A Input: 19V 3.42A Imprint Concept International GmbH Contains FCC ID: YE3600-AX200NG Assembled in Taiwan Contains FCC ID: YE3600-AX200NG Contains FCC ID: YE3600-AX200NG Assembled in Taiwan Imprint Concept International GmbH Zweibrckenstr. 5-7 80331 Mnchen Germany Zweibrckenstr. 5-7 80331 Mnchen Germany Assembled in Taiwan DT Research, Inc. Taiwan Branch DIM: MM (INCH) PART NAME LT330 label location UNIT MM TOL UNLESS NOTED PART NO. X 0.1

.XX 0.1 ANGLE 0.1 MATERIAL 8B35 t= 0.254 DWG. NO. LT330LBLL01a DATE: 09/07/20

REV: 00 SH: 1/1 APPROVE DESIGN DRAWN Wing SCALE 1:1 DON'T SCALE DRAWING DT Research, lnc. San Jose, CA 95131, USA www.dtresearch.com Product Name: Rugged Convertible Laptop Model No.: LT330 Input: 19V 3.42A DT Research, lnc. San Jose, CA 95131, USA www.dtresearch.com Product Name: Rugged Convertible Laptop Model No.: LT330 Input: 19V 3.42A Contains FCC ID: YE3600-AX200NG Assembled in Taiwan Contains FCC ID: YE3600-AX200NG Assembled in Taiwan Color Background- COOL BLACK Letter/LOGO/Block - WHITE Material 8B35 t= 0.254 Adhesive 3M 467 DT Research, Inc. Taiwan Branch DIM: MM (INCH) PART NAME Model Label LT330 UNIT MM TOL UNLESS NOTED PART NO. X 0.1

.XX 0.1 ANGLE 0.1 MATERIAL 8B35 t= 0.254 DWG. NO. LT330LB01a DATE: 09/09/20

REV: 00 SH: 1/1 APPROVE DESIGN DRAWN Wing SCALE 1:1 DON'T SCALE DRAWING

59.5 mm

Adhesive

m

m

5

.

9

4

2.8 mm

2

.

8

m

m

This device complies with Part 15 of

the FCC Rules. Operation is subject

to the following two conditions: (1)

This device may not cause harmful

interference, and (2) this device

must accept any interference

received, including interference that

may cause undesired operation.

DT Research, lnc.

San Jose, CA 95131, USA

www.dtresearch.com

Product Name: Medical-Cart Computer

Model No.: 584T

Input: 19V 6.31A

Contains FCC ID: YE3600-AX200NG

Assembled in Taiwan

Color

Background- COOL GRAY3C

Letter/LOGO/Block - BLACK

Material 8B35 t= 0.178

Adhesive 3M 467

DIM: MM (INCH)

PART NAME

Model Label 584T

UNIT

MM

DT Research, Inc. Taiwan Branch

TOL UNLESS NOTED

PART NO.

.X ±0.1

.XX

±0.1

ANGLE ±0.1°

MATERIAL

8B35 t= 0.178

.

DWG. NO.

584LB01

DATE: 01/28/21’

:

REV:00 SH:1/1

APPROVE

DESIGN

DRAWN

Wing

SCALE

1:1

DON'T SCALE

DRAWING

59.5 mm

Adhesive

This device complies with Part 15

of the FCC Rules. Operation is

subject to the following two

conditions: (1) This device may

not cause harmful interference,

and (2) this device must accept

any interference received,

including interference that may

cause undesired operation.

DT Research, lnc.

San Jose, CA 95131, USA

www.dtresearch.com

Product Name: Medical-Cart Computer

Model No.: 584T

Input: 19V 6.31A

Contains FCC ID: YE3600-AX200NG

Assembled in Taiwan

2

.

8

m

m

DT Research, lnc.

San Jose, CA 95131, USA

www.dtresearch.com

Product Name: Medical-Cart Computer

Model No.: 584T

Input: 19V 6.31A

Contains FCC ID: YE3600-AX200NG

Assembled in Taiwan

m

m

5

.

9

4

Contains FCC ID: YE3600-AX200NG

Assembled in Taiwan

DT Research, lnc.

San Jose, CA 95131, USA

www.dtresearch.com

Product Name: Medical-Cart Computer

Model No.: 584T

Input: 19V 6.31A

2.8 mm

Color

Color

Background- COOL GRAY3C

Background- COOL GRAY3C

Letter/LOGO/Block - BLACK

Letter/LOGO/Block - BLACK

Material 8B35 t= 0.178

Material 8B35 t= 0.178

Adhesive 3M 467

Adhesive 3M 467

DIM: MM (INCH)

PART NAME

Model Label 584T

UNIT

MM

DT Research, Inc. Taiwan Branch

TOL UNLESS NOTED

PART NO.

.X ±0.1

.XX

±0.1

ANGLE ±0.1°

MATERIAL

8B35 t= 0.178

.

DWG. NO.

584LB01

DATE: 01/28/21’

:

REV:00 SH:1/1

APPROVE

DESIGN

DRAWN

Wing

SCALE

1:1

DON'T SCALE

DRAWING

Contains FCC ID: YE3600-AX200NG CIRCUIT DESCRIPTION the Rugged Laptop with a 11.6 convertible display and an LED- backlit keyboard is powered by the Intel processor, offering optimal combinations of performance and power savings. The LT320 Rugged Laptop is available with Microsoft Windows operating system. The software operating system features web browser, client/ server computing software, media player, accessories, and applications support. The LT320 contains a certified Bluetooth+WLAN Module, FCC ID: YE3600-AX200NG, Granted at 05/25/2020. This device does not come with an LTE module and there are multiple models: LT32XX-

XXX(X=blank, A~Z or 0~9), only different on Model No.. 1. PMIC powered for system All the system powered by PMIC when power button on. When adapter on, the PMIC charges main battery through +PMIC_IPSOUT after inserting the main battery. When press the power button, the battery discharge from PMIC and system will work. 2. Auto shutdown circuit When system on the circuits can detect main battery voltage level by GPIO. 1. when the main battery voltage level is above 3.5V, system can work normal;

2. when the main battery voltage level is and/or below 3.5V, system will shut down auto. 3. Headphone and loudspeaker circuit The speaker is drived by inner power amplifier of audio codec ALC256. The headphone is drived by audio codec ALC256. 4. WIFI/BT CON Circuit The NGFF con support Intel wireless module AX200NGW. The Intel wireless module gives a boost with Bluetooth technology 5.0, 2x2 11ac/ax Wi-Fi delivering up to 867Mbps. 5. Back mipi camera circuit The back mipi camera derives by Soc. The signals are defined as follows:

+2.8VA_CAM: vdd power and AF power, provided by PMIC

+1.2VA_CAM: Core vdd power, provided by PMIC

+1.8VA_CAM: Io vdd power, provided by PMIC Reset: reset signal, provided by soc TF CARD CON, powered controlled by soc GPIO SDIO signal: provided by soc V-SDIO signals. 6. TF Card circuit 7. LCD Panel circuit The LCD mipi signals is provided by SOC. The signals are defined as follows: MIPI signals

/reset signal: provided by soc The LT320 has two batteries for system, one is main battery and another is backup battery. the RF modules powered by the main battery, and the backup battery is only for data backup. The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user. And the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Main Chipset Information Item Main IC Oscillator Specification SOC 32.768KHz*2, 24MHz, 25MHz, 12MHz Contains FCC ID: YE3600-AX200NG For Bluetooth:

Operation Frequency:

Bluetooth Version:

Spectrum Spread Technology:

Modulation Type:

Number of Channels:

Channel Spacing:

Antenna Type:

Antenna Gain:

For BLE:

2402MHz to 2480MHz Bluetooth V5.0 Frequency Hopping Spread Spectrum(FHSS) GFSK, /4DQPSK, 8DPSK 79 1MHz PIFA Antenna 3.2dBi Operation Frequency:

Bluetooth Version:

Modulation Type:

Number of Channels:

Channel Spacing:

Antenna Type:

Antenna Gain:

2402MHz to 2480MHz Bluetooth V5.0 GFSK 40 2MHz PIFA Antenna 3.2dBi For 802.11b/g/n:

Operation Frequency:

Modulation Type:

Number of Channels:

Channel Spacing:

Antenna Type:

Antenna Gain:

Operation Frequency:

802.11b/g/n/ax(HT20): 2412MHz to 2472MHz 802.11n/ax(HT40): 2422MHz to 2462MHz 802.11b: DSSS (CCK, DQPSK, DBPSK) 802.11g/n/ax: OFDM (64QAM, 16QAM, QPSK, BPSK) 802.11b/g/n/ax(HT20):13 802.11n/ax(HT40):9 5MHz PIFA Antenna Antenna1: 4.4dBi, Antenna2: 3.2dBi Mode Frequency Range(MHz) Number of channels Band UNII Band I UNII Band II-A UNII Band II-C UNII Band III IEEE 802.11a/n/ax(HT20) IEEE 802.11n/ax(HT40) IEEE 802.11ac/ax(HT80) IEEE 802.11ac/ax(HT160) IEEE 802.11a/n/ax(HT20) IEEE 802.11n/ax(HT40) IEEE 802.11ac/ax(HT80) IEEE 802.11a/n/ax(HT20) IEEE 802.11a/n/ax(HT20) IEEE 802.11n/ax(HT40) IEEE 802.11ac/ax(HT80) IEEE 802.11a/n/ax(HT20) IEEE 802.11n/ax(HT40) IEEE 802.11ac/ax(HT80) 5180-5240 5190-5230 5210-5210 5250-5250 5260-5320 5270-5310 5290-5290 5500-5700 5720-5720 5710-5710 5530-5690 5745-5825 5755-5795 5775-5775 4 2 1 1 4 2 1 1 1 3 5 2 1 11 Modulation Type:

IEEE 802.11a: OFDM(64QAM, 16QAM, QPSK, BPSK) IEEE 802.11n: OFDM (BPSK, QPSK, 16QAM, 64QAM) IEEE 802.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM) DFS Function:

Slave without radar detection TPC Function: Not support Sample Type: Portable device Antenna Type: PIFA Antenna Antenna Gain: Antenna1: 2.7dBi, Antenna2: 1.9dBi

Channel Statement We, DT Research, Inc. declare that this EUT

(FCC ID: YE3600-AX200NG) doesnt have ad Hoc Mode function on non-US/Canada frequencies. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/ Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Print Name: JS Hsu Title: Manager Sincerely, Signature:

On behalf of Company: DT Research, Inc. Telephone: 886-2-2298-1039 ext. 309 E-mail: js_hsu@dtri.com

Channel Statement We, DT Research, Inc. declare that this EUT

(FCC ID: YE3600-AX200NG) doesnt have ad Hoc Mode function on non-US/Canada frequencies. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/ Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Sincerely, Sincerely, Print Name: JS Hsu Title: Manager Signature:

On behalf of Company: DT Research, Inc. Telephone: 886-2-2298-1039 ext. 309 E-mail: js_hsu@dtri.com

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name DT Research, Inc. Address Grantee Code FCC ID 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI Taiwan YE3 YE3600-AX200NG Authorized Contact Name JS Hsu Contact Email Contact Phone js_hsu@dtri.com 886-2-2298-1039 ext. 309 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1)

(2)

(3) labeling the equipment with the exact FCC ID as specified in this application, compliance statement labeling pursuant to the applicable rules, compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: 2021-8-10 Print Name:

Title:

JS Hsu Manager

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

DT Research, Inc. Date: 2021-9-17 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: YE3600-AX200NG To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou Branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with DT Research, Inc. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: JS Hsu Title: Manager Signature:

On behalf of Company: DT Research, Inc. Telephone: 886-2-2298-1039 ext. 309 E-mail: js_hsu@dtri.com

Contains FCC ID: YE3600-AX200NG CIRCUIT DESCRIPTION the Rugged Laptop with a 15.6 convertible display and an LED- backlit keyboard is powered by the Intel processor, offering optimal combinations of performance and power savings. The LT350 Rugged Laptop is available with Microsoft Windows operating system. The software operating system features web browser, client/ server computing software, media player, accessories, and applications support. The LT350 contains a certified Bluetooth+WLAN Module, FCC ID: YE3600-AX200NG, Granted at 05/25/2020. This device does not come with an LTE module and there are multiple models: LT35XX-

XXX(X=blank, A~Z or 0~9), only different on Model No.. 1. PMIC powered for system All the system powered by PMIC when power button on. When adapter on, the PMIC charges main battery through +PMIC_IPSOUT after inserting the main battery. When press the power button, the battery discharge from PMIC and system will work. 2. Auto shutdown circuit When system on the circuits can detect main battery voltage level by GPIO. 1. when the main battery voltage level is above 3.5V, system can work normal;

2. when the main battery voltage level is and/or below 3.5V, system will shut down auto. 3. Headphone and loudspeaker circuit The speaker is drived by inner power amplifier of audio codec ALC256. The headphone is drived by audio codec ALC256. 4. WIFI/BT CON Circuit The NGFF con support Intel wireless module AX200NGW. The Intel wireless module gives a boost with Bluetooth technology 5.0, 2x2 11ac/ax Wi-Fi delivering up to 867Mbps. 5. Back mipi camera circuit The back mipi camera derives by Soc. The signals are defined as follows:

+2.8VA_CAM: vdd power and AF power, provided by PMIC

+1.2VA_CAM: Core vdd power, provided by PMIC

+1.8VA_CAM: Io vdd power, provided by PMIC Reset: reset signal, provided by soc TF CARD CON, powered controlled by soc GPIO SDIO signal: provided by soc V-SDIO signals. 6. TF Card circuit 7. LCD Panel circuit The LCD mipi signals is provided by SOC. The signals are defined as follows: MIPI signals

/reset signal: provided by soc The LT350 has two batteries for system, one is main battery and another is backup battery. the RF modules powered by the main battery, and the backup battery is only for data backup. The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user. And the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Main Chipset Information Item Main IC Oscillator Specification SOC 32.768KHz*2, 24MHz, 25MHz, 12MHz Contains FCC ID: YE3600-AX200NG For Bluetooth:

Operation Frequency:

Bluetooth Version:

Spectrum Spread Technology:

Modulation Type:

Number of Channels:

Channel Spacing:

Antenna Type:

Antenna Gain:

For BLE:

2402MHz to 2480MHz Bluetooth V5.0 Frequency Hopping Spread Spectrum(FHSS) GFSK, /4DQPSK, 8DPSK 79 1MHz PIFA Antenna 2.7dBi Operation Frequency:

Bluetooth Version:

Modulation Type:

Number of Channels:

Channel Spacing:

Antenna Type:

Antenna Gain:

2402MHz to 2480MHz Bluetooth V5.0 GFSK 40 2MHz PIFA Antenna 2.7dBi For 802.11b/g/n:

Operation Frequency: 802.11b/g/n/ax(HT20): 2412MHz to 2472MHz 802.11n/ax(HT40): 2422MHz to 2462MHz Modulation Type:

802.11b: DSSS (CCK, DQPSK, DBPSK) 802.11g: OFDM (BPSK, QPSK, 16QAM, 64QAM) 802.11n(HT20 and HT40): OFDM (BPSK, QPSK, 16QAM, 64QAM) 802.11ax(HT20 and HT40): OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) Number of Channels:

Channel Spacing:

Antenna Type:

Antenna Gain:

802.11b/g/n/ax(HT20):13 802.11n/ax(HT40):9 5MHz PIFA Antenna Antenna1: 2.8dBi, Antenna2: 2.7dBi Mode Operation Frequency:

Band UNII Band I UNII Band II-A UNII Band II-C UNII Band III IEEE 802.11a/n/ax(HT20) IEEE 802.11n/ax(HT40) IEEE 802.11ac/ax(HT80) IEEE 802.11ac/ax(HT160) IEEE 802.11a/n/ax(HT20) IEEE 802.11n/ax(HT40) IEEE 802.11ac/ax(HT80) IEEE 802.11a/n/ax(HT20) IEEE 802.11a/n/ax(HT20) IEEE 802.11n/ax(HT40) IEEE 802.11ac/ax(HT80) IEEE 802.11a/n/ax(HT20) IEEE 802.11n/ax(HT40) IEEE 802.11ac/ax(HT80) Frequency Range(MHz) Number of channels 5180-5240 5190-5230 5210-5210 5250-5250 5260-5320 5270-5310 5290-5290 5500-5700 5720-5720 5710-5710 5530-5690 5745-5825 5755-5795 5775-5775 4 2 1 1 4 2 1 1 1 3 5 2 1 11 Modulation Type:

IEEE 802.11a: OFDM (BPSK, QPSK, 16QAM, 64QAM) IEEE 802.11n: OFDM (BPSK, QPSK, 16QAM, 64QAM) IEEE 802.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM) IEEE 802.11ax: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) DFS Function:

Slave without radar detection Contains FCC ID: YE3600-AX200NG TPC Function: Not support Sample Type: Portable device Antenna Type: PIFA Antenna Antenna Gain: Antenna1: 2.3dBi, Antenna2: 1.7dBi

SGS North America Inc. i i 620 Old Peachtree Road Applicant Declaration SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name DT Research, Inc. |

Address 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI Taiwan Grantee Code YE3 FCC ID YE3600-AX200NG Authorized Contact Name JS Hsu Contact Email js_hsu@dtri.com Contact Phone 886-2-2298-1039 ext. 309 |

|, the undersigned, certify that | am an authorized signatory for the Applicant and therefore declare;

a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1) labeling the equipment with the exact FCC ID as specified in this application,

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, c) ifthe Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with 1SO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

(2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

(3) the Applicant shal/, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-requlations-title-47 Link to KDBs: https://apps.fcc.gov/oetcffkdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsfleng/sf01130.html Applicant Signature: Date: 2020/6/15 DOH, un Print Name: JS Hsu Title:

Manager

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

DT Research, Inc. To:

Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 From: DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI Taiwan Regarding: Confidentiality Request regarding application for FCC ID: YE3600-AX200NG LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application teferenced above. Schematic(s) Block Diagrams Operational Descriptions Tune up procedures The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D014 Confidentiality Request Procedures. External. Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: JS Hsu Title: Manager Signature: LE Yh.

On behalf of Company: DT Research, Inc. Telephone: 886-2-2298-1039 ext, 309 E-mail: js_hsu@dtri.com Sincerely, Print Name: JS Hsu sora Mea On behalf of Company: DT Research, Inc. Telephone: 886-2-2298-1039 ext. 309 E-mail: js_hsu@atri.com Title: Manager

DT Research, Inc. Request for Class II Permissive Change FCC ID: YE3600-AX200NG Date: 2020/10/12 To: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Please be notified that we, the undersigned, (DT Research, Inc.) declare that the reasons for this Class II permissive change are as below:

--RF module used in this portable device requires SAR testing compliance of which is not performed and demonstrated in Modular approval.

-- Host product also contains a DT Research WLAN/BT Module which has been authorized under FCC ID:

YE3600-AX200NG dated on 05/25/2020.

--The antenna of the RF module used in this portable device has been replaced, and the replacement antenna specifications are shown in the following table:

Operation Frequency Antenna types, Antenna Gain Bluetooth: 2402MHz-2480MHz Bluetooth LE: 2402MHz-2480MHz PIFA Antenna, 2.9dBi PIFA Antenna, 2.9dBi 802.11b/g/n/ax: 2412MHz-2472MHz/2422MHz-2462MHz PIFA Antenna, 802.11a/n/ac/ax: 5180MHz-5240MHz, 5190MHz-5230MHz, PIFA Antenna, 5210MHz-5210MHz, 5250MHz-5250MHz, 5260MHz-5320MHz, Antenna1:2.3dBi, Antenna2:2.9dBi Antenna1:3.1dBi, Antenna2:2.9dBi 5270MHz-5310MHz, 5290MHz-5290MHz, 5500MHz- 5700MHz, 5710MHz-5710MHz, 5720MHz-5720MHz, 5530MHz-5690MHz, 5745MHz-5825MHz, 5755MHz-5795MHz, 5775MHz-5775MHz,

-- The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user. And the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Sincerely, Print Name: JS Hsu Signature:

Title: Manager On behalf of Company: DT Research, Inc. Telephone: 886-2-2298-1039 ext. 309 E-mail: js_hsu@dtri.com

DT Research, Inc. Request for Class II Permissive Change FCC ID: YE3600-AX200NG Date: 2020/7/16 To: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Please be notified that we, the undersigned, (DT Research, Inc.) declare that the reasons for this Class II permissive change are as below:

--RF module used in this portable device requires SAR testing compliance of which is not performed and demonstrated in Modular approval.

--Host product also contains a Sierra LTE module which has been authorized under FCC ID: N7NEM75S dated on 12/11/2018. SAR testing is required to evaluate simultaneous transmission of both modules.

--The host products have different sizes, the size of this project is 13.3 inches, and the antenna location is also different. Only the modules LTE Band 2/4/5/12/13/14 functions are used for this portable device, Other operating frequency bands will be disabled by software. Sincerely, Print Name: JS Hsu Signature:

Title: Manager On behalf of Company: DT Research, Inc. Telephone: 886-2-2298-1039 ext. 309 E-mail: js_hsu@dtri.com

DT Rese Office of Engineering and Technology Laboratory Di\

7435 Oakland Mills Rd. Columbia MD 21046 From: DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU D EN SO SOON CO a, ee Te | ae, meee a a ital ida teal eee Beek cela LONG TERM CONFIDENTIALITY arch, Inc. fision ISTRICT NEW TAIPEI Taiwan fan far ECC? IM: VEaRnn AYoOnNNNIC Pursuant to 47 CFR Section 0.459 and 0.457 of the confidential treatment of the documents listed below, referenced above. Schematic(s) Block Diagrams Operational Descriptions Tune up procedures The documents above contain proprietary informatio information may prove harmful to the business of the commission's rules, the applicant hereby request associated with the certification application

| not released to the public. Public disclosure of this applicant. Sincerely, Print Name: JS Hsu ff Signature: 754 oA On behalf of Company: DT Research, Inc. Telephone: 886-2-2298-1039 ext. 309 E-mail: js_hsu@dtri.com Title: Manager

DT Research, Inc. Date: 2020/6/15 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: YE3600-AX200NG To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with DT Research, Inc. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: JS Hsu Title: Manager Signature: Tv On behalf of Company: DT Research, Inc. Telephone: 886-2-2298-1039 ext. 309 E-mail: js_hsu@dtri.com

DT Rese To:

Office of Engineering and Technology Laboratory Di 7435 Oakland Mills Rd. Columbia MD 21046 From: DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU D OI IN ON I oe a ee Se a ee ee a ae ee LONG TERM CONFIDENTIALITY arch, Inc. fision ISTRICT NEW TAIPEI Taiwan ban far ECC IM- VEOQRnN AYONNNIC Pursuant to 47 CFR Section 0.459 and 0.457 of the confidential treatment of the documents listed below, referenced above. Schematic(s) Block Diagrams Operational Descriptions Tune up procedures The documents above contain proprietary informatior information may prove harmful to the business of the commission's rules, the applicant hereby request associated with the certification application

| not released to the public. Public disclosure of this applicant. Sincerely, Print Name: JS Hsu LF Signature: 754 w~

On behalf of Company: DT Research, Inc. Telephone: 886-2-2298-1039 ext. 309 E-mail: js_hsu@dtri.com Title: Manager

DT Research 2020/5/18 Federal Communications Commission Authorization and Evaluation Division ATTESTATION FCC ID: YE3600-AX200NG Product: WLAN Module Model: AX200NGW We dont provide any controls or software to allow operation outside the USA frequency band when we sell a product bearing the FCC ID: YE3600-AX200NG anywhere in the world. Sincerely, JS Hsu / QA Manager DT Research, Inc. Tel: 886-2-2298-1039 Fax: 886-2-2298-1106 Email: js hsu@dtri.com