FCC ID: CJ6AX211NGWWB Intel Wi-Fi 6E AX211

by: Dynabook Inc. latest update: 2024-04-03 model: AX211NGWWB

Fifteen grants have been issued under this FCC ID from 03/14/2024 to 04/03/2024 (this is one of fifteen releases in 2024 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked drivers, troubleshooting guides, instructions, password defaults, & warrantee terms.
permalink for this FCC identifier
product lifecycle: recent release
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various User Manual Users Manual pdf 2.64 MiB March 05 2024 / March 14 2024
various External Photos External Photos pdf 223.59 KiB March 05 2024 / March 14 2024
various Label Location ID Label/Location Info pdf 91.30 KiB April 01 2024 / April 03 2024
various Label Sample ID Label/Location Info pdf 74.70 KiB April 01 2024 / April 03 2024
various Lable Sample ID Label/Location Info pdf 160.28 KiB March 05 2024 / March 14 2024
various Antenna Internal Photos High-Tek Internal Photos pdf April 01 2024 / September 30 2024 delayed release
various Antenna Internal Photos SOUTHSTAR Internal Photos pdf April 01 2024 / September 30 2024 delayed release
various Antenna Report High-Tek Test Report pdf 2.46 MiB April 03 2024
various Antenna Report SOUTHSTAR Test Report pdf 872.14 KiB April 03 2024
various Antenna TSUP High-Tek Test Setup Photos pdf April 01 2024 / September 30 2024 delayed release
various Antenna TSUP SOUTHSTAR Test Setup Photos pdf April 01 2024 / September 30 2024 delayed release
various Attestation Statement Part 2.911(d)(7) Attestation Statements pdf 384.93 KiB April 01 2024 / April 03 2024
various Attstn Stmts Part 2.911(d)(5)(i)&(ii) Attestation Statements pdf 408.83 KiB April 01 2024 / April 03 2024
various Block Diagram Block Diagram pdf April 01 2024 confidential
various Class II Change Letter Cover Letter(s) pdf 353.15 KiB April 01 2024 / April 03 2024
various Confidentiality Request Letter Cover Letter(s) pdf 396.30 KiB April 01 2024 / April 03 2024
various Declaration of Authorization Cover Letter(s) pdf 187.02 KiB April 01 2024 / April 03 2024
various Declaration of Model Names Letter Cover Letter(s) pdf 219.98 KiB April 01 2024 / April 03 2024
various Internal Photos pt. 2 Internal Photos pdf April 01 2024 / September 30 2024 delayed release
various Internal Photos pt.1 Internal Photos pdf April 01 2024 / September 30 2024 delayed release
various Operational Description Operational Description pdf April 01 2024 confidential
various Schematics Schematics pdf April 01 2024 confidential
various Antenna Internal Photo High-Tek Internal Photos pdf April 02 2024 / September 30 2024 delayed release
various Antenna Internal Photo SOUTHSTAR Internal Photos pdf April 02 2024 / September 30 2024 delayed release
various Internal Photos Part 1 Internal Photos pdf April 02 2024 / September 30 2024 delayed release
various Internal Photos Part 2 Internal Photos pdf April 02 2024 / September 30 2024 delayed release
various SAR App A System Check Data RF Exposure Info pdf 1016.79 KiB April 02 2024 / April 03 2024
various SAR App B Highet Msmt Data Plot RF Exposure Info pdf 722.06 KiB April 02 2024 / April 03 2024
various SAR App D Probe Cal EUmmWV4 RF Exposure Info pdf 2.14 MiB April 02 2024 / April 03 2024
various SAR App D Probe Cal EX3DV4 RF Exposure Info pdf 2.13 MiB April 02 2024 / April 03 2024
various SAR App E Dipole Src Cal 5G Ver Src 10GHz RF Exposure Info pdf 428.46 KiB April 02 2024 / April 03 2024
various SAR App E Dipole Src Cal D2450 RF Exposure Info pdf 1.31 MiB April 02 2024 / April 03 2024
various SAR App E Dipole Src Cal D5GHz RF Exposure Info pdf 2.45 MiB April 02 2024 / April 03 2024
various SAR App E Dipole Src Cal D6.5GHz RF Exposure Info pdf 1.77 MiB April 02 2024 / April 03 2024
various SAR Report RF Exposure Info pdf 1.40 MiB April 02 2024 / April 03 2024
various TSUP SAR Appendix C Test Setup Photos pdf April 02 2024 / September 30 2024 delayed release
various SAR Appendix A System Check Data RF Exposure Info pdf 1016.91 KiB March 29 2024 / April 01 2024
various SAR Appendix B Highest Measurement Data RF Exposure Info pdf 782.28 KiB March 29 2024 / April 01 2024
various SAR Appendix D Probe Calibration RF Exposure Info pdf 4.31 MiB March 29 2024 / April 01 2024
various SAR Appendix E Dipole & Source Calibration RF Exposure Info pdf 2.86 MiB March 29 2024 / April 01 2024
various SAR Test Setup Photo Test Setup Photos pdf March 29 2024 / September 28 2024 delayed release
various New Applicant Change in ID Request Ltr Cover Letter(s) pdf 60.93 KiB March 05 2024 / March 14 2024
various Original Applicant Permission Letter Cover Letter(s) pdf 118.93 KiB March 05 2024 / March 14 2024
various Cover Letter(s) pdf March 05 2024 / March 14 2024
various User Manual Users Manual pdf 2.64 MiB March 05 2024 / March 14 2024
various External Photos External Photos pdf 223.59 KiB March 05 2024 / March 14 2024
various Label Location ID Label/Location Info pdf 91.30 KiB April 01 2024 / April 03 2024
various Label Sample ID Label/Location Info pdf 74.70 KiB April 01 2024 / April 03 2024
various Lable Sample ID Label/Location Info pdf 160.28 KiB March 05 2024 / March 14 2024
various Antenna Report High-Tek Test Report pdf 2.46 MiB April 03 2024
various Antenna Report SOUTHSTAR Test Report pdf 872.14 KiB April 03 2024
various Attestation Statement Part 2.911(d)(7) Attestation Statements pdf 384.93 KiB April 01 2024 / April 03 2024
various Attstn Stmts Part 2.911(d)(5)(i)&(ii) Attestation Statements pdf 408.83 KiB April 01 2024 / April 03 2024
various Class II Change Letter Cover Letter(s) pdf 353.15 KiB April 01 2024 / April 03 2024
various Confidentiality Request Letter Cover Letter(s) pdf 396.30 KiB April 01 2024 / April 03 2024
various Declaration of Authorization Cover Letter(s) pdf 187.02 KiB April 01 2024 / April 03 2024
various Declaration of Model Names Letter Cover Letter(s) pdf 219.98 KiB April 01 2024 / April 03 2024
various SAR App A System Check Data RF Exposure Info pdf 1016.79 KiB April 02 2024 / April 03 2024
various SAR App B Highet Msmt Data Plot RF Exposure Info pdf 722.06 KiB April 02 2024 / April 03 2024
various SAR App D Probe Cal EUmmWV4 RF Exposure Info pdf 2.14 MiB April 02 2024 / April 03 2024
various SAR App D Probe Cal EX3DV4 RF Exposure Info pdf 2.13 MiB April 02 2024 / April 03 2024
various SAR App E Dipole Src Cal 5G Ver Src 10GHz RF Exposure Info pdf 428.46 KiB April 02 2024 / April 03 2024
various SAR App E Dipole Src Cal D2450 RF Exposure Info pdf 1.31 MiB April 02 2024 / April 03 2024
various SAR App E Dipole Src Cal D5GHz RF Exposure Info pdf 2.45 MiB April 02 2024 / April 03 2024
various SAR App E Dipole Src Cal D6.5GHz RF Exposure Info pdf 1.77 MiB April 02 2024 / April 03 2024
various SAR Report RF Exposure Info pdf 1.40 MiB April 02 2024 / April 03 2024
various SAR Appendix A System Check Data RF Exposure Info pdf 1016.91 KiB March 29 2024 / April 01 2024
various SAR Appendix B Highest Measurement Data RF Exposure Info pdf 782.28 KiB March 29 2024 / April 01 2024
various SAR Appendix D Probe Calibration RF Exposure Info pdf 4.31 MiB March 29 2024 / April 01 2024
various SAR Appendix E Dipole & Source Calibration RF Exposure Info pdf 2.86 MiB March 29 2024 / April 01 2024
various New Applicant Change in ID Request Ltr Cover Letter(s) pdf 60.93 KiB March 05 2024 / March 14 2024
various Original Applicant Permission Letter Cover Letter(s) pdf 118.93 KiB March 05 2024 / March 14 2024

frequency equipment class purpose
1 2024-04-03 JBP - Part 15 Class B Computing Device Peripheral Class II Permissive Change
2 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
4 2422 ~ 2462 DTS - Digital Transmission System
5 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
6 2024-04-01 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
7 2422 ~ 2462 DTS - Digital Transmission System
8 JBP - Part 15 Class B Computing Device Peripheral
9 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
11 2024-03-14 2422 ~ 2462 DTS - Digital Transmission System Change in Identification
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 02/17/2021
13 JBP - Part 15 Class B Computing Device Peripheral Change in Identification
14 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
15 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Change in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 04/26/2021

Application Forms

app s Applicant Information
various Effective 2024-04-03
various 2024-04-01
various 2024-03-14
various Applicant's complete, legal business name Dynabook Inc.
various FCC Registration Number (FRN) 0003743994
various Physical Address 6-15 Toyosu 5-chome, Koto-ku
various Tokyo 135-8505, N/A
various Japan
app s TCB Information
various TCB Application Email Address t******@timcoengr.com
various TCB Scope A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
various A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
various Grantee Code CJ6
various Equipment Product Code AX211NGWWB
app s Person at the applicant's address to receive grant or for contact
various Name R**** K****
various Title Senior Manager
various Telephone Number 81-50********
various Fax Number 81-42********
various E-mail R******@dynabook.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)09/30/2024
various09/28/2024
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassJBP - Part 15 Class B Computing Device Peripheral
variousDSS - Part 15 Spread Spectrum Transmitter
variousNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
various6XD - 15E 6 GHz Low Power Indoor Client
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Wi-Fi 6E AX211
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousYes
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousChange in Identification
variousChange in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 02/17/2021
variousChange in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 04/26/2021
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II Permissive Change: Authorizes portable use when integrated into the dynabook models SATELLITE PRO C50-K and SATELLITE C50-K.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06 W/kg and 1.05 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14 mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Authorizes portable use when integrated into the dynabook models SATELLITE PRO C50-K and SATELLITE C50-K. The highest reported SAR for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 1.29 W/kg, respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14 mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Authorizes portable use when integrated into the dynabook models SATELLITE PRO C50-K and SATELLITE C50-K. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.56 W/kg and 1.05 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49 W/kg and 1.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Authorizes portable use when integrated into the dynabook models SATELLITE PRO C40-K, dynabook E40-K, and SATELLITE C40-K. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.43 W/kg and 0.67 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14 mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Class II Permissive Change: Authorizes portable use when integrated into the dynabook models SATELLITE PRO C50-K and SATELLITE C50-K. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.42 W/kg and 0.88 W/kg, respectively. The highest reported power density is 7.98 W/m2.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14 mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Authorizes portable use when integrated into the dynabook models SATELLITE PRO C40-K, dynabook E40-K, and SATELLITE C40-K. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.18 W/kg and 1.29 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49 W/kg and 1.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Authorizes portable use when integrated into the dynabook models SATELLITE PRO C40-K, dynabook E40-K, and SATELLITE C40-K. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.79 W/kg and 1.23 W/kg, respectively.
variousClass II Permissive Change: Authorizes portable use when integrated into the dynabook models SATELLITE PRO C40-K, dynabook E40-K, and SATELLITE C40-K.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06 W/kg and 1.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14 mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Authorizes portable use when integrated into the dynabook models SATELLITE PRO C40-K, dynabook E40-K, and SATELLITE C40-K. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.10 W/kg and 1.29 W/kg, respectively.
variousPower Output listed is EIRP. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14 mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Class II Permissive Change: Authorizes portable use when integrated into the dynabook models SATELLITE PRO C40-K, dynabook E40-K, and SATELLITE C40-K. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.69 W/kg and 1.17 W/kg, respectively. The highest reported power density is 7.98 W/m2.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49 W/kg and 1.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06 W/kg and 1.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14 mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14 mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14 mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various Intel Corporation S.A.S.
various Name M****** L********
various N******** A******
various Telephone Number +886-********
various 00334********
various Fax Number +886-********
various E-mail m******@dekra.com
various n******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC MO 5180 5240 0.152
3 2 15E CC MO 5190 5230 0.182
3 3 15E CC MO 5210 5210 0.093
3 4 15E CC MO ND 5250 5250 0.064
3 5 15E CC MO ND 5260 5320 0.152
3 6 15E CC MO ND 5270 5310 0.194
3 7 15E CC MO ND 5290 5290 0.088
3 8 15E CC MO ND 5500 5700 0.154
3 9 15E CC MO ND 5510 5670 0.249
3 1 15E CC MO ND 5710 5710 0.122
3 11 15E CC MO ND 5720 5720 0.104
3 12 15E CC MO ND 5530 5690 0.215
3 13 15E CC MO 5745 5825 0.254
3 14 15E CC MO 5755 5795 0.257
3 15 15E CC MO 5775 5775 0.212
3 16 15E CC MO 5845 5885 0.296
3 17 15E CC MO 5835 5875 0.64
3 18 15E CC MO 5855 5855 0.676
3 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.009
4 2 15C CC MO 2412 2472 0.979
4 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC EP MO 5955 7115 0.003
5 2 15E CC EP MO 5965 7085 0.007
5 3 15E CC EP MO 5985 7025 0.012
5 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC MO 5180 5240 0.152
6 2 15E CC MO 5190 5230 0.182
6 3 15E CC MO 5210 5210 0.093
6 4 15E CC MO ND 5250 5250 0.064
6 5 15E CC MO ND 5260 5320 0.152
6 6 15E CC MO ND 5270 5310 0.194
6 7 15E CC MO ND 5290 5290 0.088
6 8 15E CC MO ND 5500 5700 0.154
6 9 15E CC MO ND 5510 5670 0.249
6 1 15E CC MO ND 5710 5710 0.122
6 11 15E CC MO ND 5720 5720 0.104
6 12 15E CC MO ND 5530 5690 0.215
6 13 15E CC MO 5745 5825 0.254
6 14 15E CC MO 5755 5795 0.257
6 15 15E CC MO 5775 5775 0.212
6 16 15E CC MO 5845 5885 0.296
6 17 15E CC MO 5835 5875 0.64
6 18 15E CC MO 5855 5855 0.676
6 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.009
7 2 15C CC MO 2412 2472 0.979
7 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC EP MO 5955 7115 0.003
10 2 15E CC EP MO 5965 7085 0.007
10 3 15E CC EP MO 5985 7025 0.012
10 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402 2480 0.009
11 2 15C CC MO 2412 2472 0.979
11 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E CC MO 5180 5240 0.152
14 2 15E CC MO 5190 5230 0.182
14 3 15E CC MO 5210 5210 0.093
14 4 15E CC MO 5250 5250 0.064
14 5 15E CC MO ND 5260 5320 0.152
14 6 15E CC MO ND 5270 5310 0.194
14 7 15E CC MO ND 5290 5290 0.088
14 8 15E CC MO ND 5500 5700 0.154
14 9 15E CC MO ND 5510 5670 0.249
14 1 15E CC MO ND 5710 5710 0.122
14 11 15E CC MO ND 5720 5720 0.104
14 12 15E CC MO ND 5530 5690 0.215
14 13 15E CC MO 5745 5825 0.254
14 14 15E CC MO 5755 5795 0.257
14 15 15E CC MO 5775 5775 0.212
14 16 15E CC MO 5845 5885 0.296
14 17 15E CC MO 5835 5875 0.64
14 18 15E CC MO 5855 5855 0.676
14 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15E CC EP MO 5955 7115 0.003
15 2 15E CC EP MO 5965 7085 0.007
15 3 15E CC EP MO 5985 7025 0.012
15 4 15E CC EP MO 6025 6985 0.021

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC