FCC ID: 2AW5B-MU01029 BT LED DESIGN HEADPHONE

143.00 mm 126.00 mm User Manual BT LED DESIGN HEADPHONE Previous song / Volume Down ~ fy x \

\\ \ Microphone

\E Micro USB Charging Port LED Indicator 3.5 LINE-IN Package Contents:

. Bluetooth headphone x1 Charging cable x1 User's Manual x1 dy": ON/OFF/Pause/Play Music

+: Short press for increase volume / long press Next song

= ": Short press for reduce volume /long press Previous song How To Use:

+ Power on: Press the center key CD 2 seconds when itis off. The blue LED light will be on, and begin to altemate blue/red LED light. A voice will prompt pairing, this indicates the headphone is in pairing mode.

+ Pairing: Activate the bluetooth function on your phone within range and select IGNITE_HP" from the list shown.When the blue/red LED light stops flashing, it has paired successfully and you will hear connected. The blue LED will flash slowly when playing music.

+ Play/Pause: When itis playing, press the center key to pause, then press the center key cb again to play.

+ Volume up: Press + once to increase the volume.

+ Volume down: Press -" once to decrease the volume.

+ Previous song: Hold down the - to play the previous song.

* Next song: Hold down the + to play the next song,

+ Phone Call:

Press to answer/end a call. Press and hold y for about 1.5 seconds to reject an incoming call.

+ Power off: When headphone is standby or operating, press the center key about 5 seconds to shut down the headphone (voice prompt power off). Tips:

+ Low Battery: LED light flash in red.

+ To Charge:

1, Insert the USB connector end of included cable (see packing list) into the USB jack on the charger or USB port on the computer. 2. The indicator light will be red while charging. 3. When the headphone is fully charged, the indicator light will turn to blue from red. Please unplug your charger from power source. 4. Please use qualified charger to recharge your headphone, If not, it may result in damage or even explosion . 5. Repeated charging and discharging the headphone will lead to decreased battery life over time, which is normal for rechargeable batteries. 6. You must charge the Bluetooth Heaphone if it has not been used for more than 6 months.

>; 1B USB Plug Micro USB Plug Technical Specifications:

* Model Number: MU01029

+ Range: 33ft / 10m

+ Battery Capacity: 200 mAh

+ Voltage: 3.7 V

+ Play Time: 4-5 hours

+ Charge Time: 2 hours

+ Charging Way: USB DC 5V

+ Frequency Response: 20Hz-20KHz

+ Operating temperature range: 0-45C FAQ:

1) Why can't | start my Bluetooth headphone?

Answer: Please ensure that the headphone is fully charged for your first use. 2) Why won't sound come out of the headphones?

Answer: Check whether the playback device and the Bluetooth headphone are successfully established. If the audio device is not properly connected, please reconnect. Please also adjust your mobile phone or Bluetooth headphone volume to a suitable volume level. 3) Why can't | find this headphone in my bluetooth options?

Answer: Make sure the Bluetooth is in visible mode. If no pairing occurs, the Bluetooth function will automatically shut off. Please reopen Bluetooth to visible mode. If there is a program error, please reboot your phone, and if program error is caused by your Bluetooth headphone, please restart the headphone. 143.00 mm 126.00 mm FCC statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the the following measures:

+ Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Z\warnine: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Z\ WARNING:

* Charge and operate only as indicated in this manual, as improper use may result in damage to the product or injury.

* To avoid risk of shock or injury, do not dismantle the device or insert any objects into the Heaphone.

* To avoid electronic interference and/or compatible conflicts, turn off the product in any facilities where posted notices instruct you to do so.

* Do not pull the Heaphone charging cable. Damage may result to the cable.

* Keep out of reach of children. This is not a toy.

* Avoid exposure to moisture, liquids, heat, flame and high voltage equipment. Retain these instructions as they contain important information.

* Do not short circuit the input terminals of the Heaphone.

* Do not drop, place heavy weight or allow heavy impact to the Heaphone.

* PCB of battery should not be crushed and twisted. Battery body should not be Bended. Do not disassemble and Do not dispose of in fire.

* Do not use the product while driving or crossing the road. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2AW5B-MU01029 Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Made in China Keep All Relevant Information For Future Reference FE

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200630831-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

E-CARE TECHNOLOGY CO.,LIMITED Address: RM 09, 27/F HO KING COMM CTR,2-16 FA YUEN ST MONGKOK, KL, HK Tel: 0754-887 12278 E-mail: topeasycare@topeasycare.com Date: 08/4/2020 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, E-CARE TECHNOLOGY CO.,LIMITED hereby declare that:

Product Name: BT LED DESIGN HEADPHONE Model No: MU01029 FCC ID: 2AW5B-MU01029 For BT Mode:

Supports BDR (GFSK), EDR (m/4-DQPSK, 8DPSK), and BLE functions . For use in America and this chip will not support/enable EDR (8DPSK) and B LE function. The EDR (8DPSK) and BLE function has been shielded by the ma nufacturer using the software. Except for the manufacturer, the end user does not have any capability to modify/change the RF parameters. We acknowledge that it is the manufacturers responsibility to provide the radio configurations to ensure compliance with Commissions rules. Sincerely Yours, Signature: Honda Printed Name: Honda Chen Title: General Manager

Circuit Description Battery (DC 3.7V) provides energy for the Bluetooth chip (AC6956A); Crystal oscillator (24MHz) pr ovides the clock signal for the Bluetooth chip. Bluetooth signals get through a matching circuit, an d then transmitted to the space through the antenna (2402-2480MHz). When the product is connected, the product can in two-way communication with other Bluetoot h Devices, and then the devices Bluetooth module sends Bluetooth signals into space, the produ ct receives the Bluetooth signal through an antenna, transmission to the Bluetooth chip via matc hing circuit.

E-CARE TECHNOLOGY CO.,LIMITED Address: RM 09, 27/F HO KING COMM CTR,2-16 FA YUEN ST MONGKOK, KL, HK Tel: 0754-887 12278 E-mail: topeasycare@topeasycare.com FCC Authorization 08/04/2020 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, E-CARE TECHNOLOGY CO.,LIMITED the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C, 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Ber Printed Name: Honda Chen Title: General Manager