Omni Outdoor
Bluetooth® Speaker
Instruction Manual
SM2927
Rubber cover
ON/OFF Switch
LED Indicator
Micro-USB input port
Caribiner
Functions:
1.
2.
3.
4.
5.
What’s included:
1 x IPX4 Water Resistant Speaker
1 x USB to Micro-USB Charging Cable
1 x Instruction Manual
1 x Caribiner
Tech Specifications
•
•
•
•
Playing time: up to 1.5 hr at max volume
Charging time: up to 1.5 hr
Pairing Name: Omni Outdoor
Waterproof Rating : IPX4
Instructions:
(Be sure to fully charge the speaker before
using for the first time.
Charging the Speaker
Connect the provided charging cable to a
power source and to the micro USB port on
the speaker (4).
The LED indicator light will glow red when
charging and turn off when fully charged.
Bluetooth® Setup:
Turn ON/OFF switch(2) to ON position,
LED indicator(3) will flash BLUE.
Turn on the Bluetooth function on mobile
device, Select “Omni Outdoor”
pairing name.
The LED(3) will turn solid Blue and a
tone will sound to confirm the speaker is
successfully paired.
Speaker will automatically pair if the mobile
device has been paired before.
Turn ON/OFF switch(2) to OFF position to
turn off the device.
If the bluetooth is disconnect the speaker
will auto shut off after 5 mins.
1.
•
•
2.
•
•
•
•
•
**
SAFETY PRECAUTIONS:
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
WARNING-When using this product, basic
precautions should always be followed:
Read all the instructions before use.
Never store or use this product in
temperatures below 32°F(0°C) or above
115°F(45°C).
The unit’s full performance is achieved
only after 2 or 3 completed charge and
discharge cycles.
Keep out of reach of children.
Do not use the device in excess of its
output rating. Overload outputs above
rating may result in a risk of fire or injury.
Do not use the device if damaged or
modified.
Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire,
explosion or risk of injury.
Do not disassemble the device. For
repairs, seek a qualified service
professional. Incorrect reassembly may
result in a risk of fire or injury.
Do not expose the device to fire or
excessive temperature. Exposure to fire
or temperatures above 104°F may cause
explosion.
Ensure that qualified service professionals
use only identical replacement parts to
ensure product safety
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with minimum distance
20cm between the radiator & your body.
FCC Statement:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment general uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC
rules. Operation is subject to the following
two conditions (1) this device may not cause
harmful interference, and (2)this device must
accept any interference received, including
interference that may cause undesired
operation.
MADE IN CHINA