7199-32BK Jabba Bluetooth Speaker Instruction Manual Whats Included:
1x Jabba Bluetooth Speaker 1x USB to Micro Charging Cable Functions:
Bluetooth Button 1. Vol-/Previous Track 2. Vol+/Next Track 3. Play/Pause/Call 4. Instructions:
Tech Specifications:
1. 2. 3. 4. Playing Time: up to 2hrs at max volume Pairing Name: Jabba Battery Capacity : 3.7V/500mA Input: 5V/400mA
(Be sure to fully charge the speaker before using for the first time) Charging the Speaker:
Connect the provided USB charging cable to a power source and to the micro USB input port on the speaker. The LED indicator will glow RED when charging, and will turn OFF when fully charged. Bluetooth Setup:
Switch the ON/OFF Switch to the ON position, the LED indicator will flash BLUE/RED and speaker will tone when in bluetooth standby mode. Turn on the Bluetooth function of the mobile device, Select the Jabba pairing name. Speaker will tone and LED indicator will flash BLUE if successfully paired. Speaker will automatically pair if the mobile device has been paired before. Switch the ON/OFF switch to the OFF position to turn off the device. Press the Bluetooth button(1) to 1. 2. disconnect from current bluetooth connection and search for a new device. If the speaker isnt connected to Bluetooth it will automatically power off after 10 minutes. Using the Speaker:
Short press the Play/Pause/Call Button(4) to pause or Play music. Vol+/Next track(3):
3. Long press - Increase volume Short press - Next track. Vol-/Previous track(2):
Long press - Reduce volume Short press - Previous track 4. 5. Calling:
Short press the Play/Pause/Call Button (4) to answer or end the call. Long press the Play/Pause/Call Button(4) to reject the call. AUX Connection:
Connect a AUX cable(NOT INCLUDED) to the 3.5mm Aux input portof the speaker and mobile device to play music directly. Safety Precautions:
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. WARNING-When using this product, basic precautions should always be followed:
Read all the instructions before use. Never store or use this product in temperatures below 32F(0C) or above 115F(45C). The units full performance is achieved only after 2 or 3 completed charge and discharge cycles. Keep out of reach of children. Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury. Do not use the device if damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury. Do not expose the device to fire or temperatures above 104F may cause explosion. Ensure that qualified service professionals use only identical replacement parts to ensure product safety. FCC Statement:
1. 2. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note:
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. ISED Statment:
This device contains licence-exempt transmitter
(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) L appareil ne doit pas produire de brouillage;
(2) L appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d en compromettre le fonctionnement. Radio Frequency Exposure Statement for ISED:
This equipment complies with ISED exposure limits set forth for an uncontrolled environment. This equipment can be used in portable exposure conditions. Dclaration dexposition aux radiofrquences pour ISED:
Cet quipement est conforme aux limites dexposition ISED tablies pour un environnement non contrl. Cet quipement peut tre utilis dans des conditions dexposition portables. Name of the Distributor:
Leedsworld Inc Address of the Distributor:
400 Hunt Valley Road, New Kensington, PA 15068 USA. FCC ID: 2BQZN719932 IC: 32784-719932 Made in China
