FCC ID: 2AYPE-GWTN156-11W Laptop with WiFi and Bluetooth

This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may causeundesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help

- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. The SAR limit in the United States (FCC) is 1.6 W/kg, which is more than 1 gram of tissue on average. The device has also been tested against this SAR limit. According to this standard, the highest SAR value reported is 0.342W/kg. The device has undergone a typical body-worn operation test, and the back of the laptop is kept at a distance of 0 mm from the body. To comply with FCC radio frequency exposure requirements, please use accessories that maintain a 0 mm spacing between the user's body and the back of the computer. The use of holsters and similar accessories should not include metal parts in their components. The use of accessories that do not meet these requirements may not meet the FCC radio frequency exposure requirements and should be avoided.

RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

E&S INTERNATIONAL ENTERPRISES, INC. Date: 7 September 2021 E&S INTERNATIONAL ENTERPRISES, INC. To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: E&S INTERNATIONAL ENTERPRISES, INC. FCC ID: 2AYPE-GWTN156-11W FCC Certification Confidentiality Request Gentlemen:

This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. E&S INTERNATIONAL ENTERPRISES, INC. requests that the following documents regarding this submission for FCC ID: 2AYPE-GWTN156-11W be kept confidential:

Exhibit Type Block Diagram Schematics Operational Description Tune-Up Procedure File Name Block Diagram.pdf Schematics.pdf Operational Description.pdf Tune-Up Procedure.pdf And below exhibit kept short-term confidential (180 days):

External photos Test setup photos Internal photos User manual External photos.pdf test photo.pdf Internal photos.pdf User manual.pdf Those documents contain detailed system and equipment description and related information about the product which E&S INTERNATIONAL ENTERPRISES, INC. considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, E&S INTERNATIONAL ENTERPRISES, INC. considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours Sincerely, Ting Liu

E&S INTERNATIONAL ENTERPRISES, INC. Date: 7 September 2021 E&S INTERNATIONAL ENTERPRISES, INC. To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

INC. the undersigned, hereby authorizes Mr. Wu The E&S INTERNATIONAL ENTERPRISES, Xuewen from Shenzhen BALUN Technology Co., Ltd. to act on the behalf of the E&S INTERNATIONAL ENTERPRISES, INC. solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AYPE-GWTN156-11W including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen BALUN Technology Co., Ltd. in connection with the Application shall have the same effect as acts of the E&S INTERNATIONAL ENTERPRISES, INC. The E&S INTERNATIONAL ENTERPRISES, INC. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-

Drug Abuse Act of 1988, 21 U.S.C. Section 862. Yours Sincerely, _______ Ting Liu

E&S International Enterprises, Inc. The following Equipment adapt FCC SDoC Procedure according to FCC part 2.906 :

For the FCC SDoC Procedure Product Name: Laptop Brand Name: Gateway Model Number: GWTN156-11, GWTN156-11BK,GWTN156-11BL,GWTN156-11RD, GWTN156-11GR,G152,G151, N15DP7 Report Number: BL-SZ2170517-401 FCC ID: 2AYPE-GWTN156-11W Its herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. It is understood that each unit marketed is identical to the device as tested, and any changes to the device that could adversely affect the emission characteristics will require retest. The following importer / responsible party in United States:

Not Available at Certification Stage Company Name:

Company Address:

Telephone:

Fax:

Person is responsible for marking this declaration:

Ting Liu____ Mangaer________ Name (Full name ) Position / Title _________________________ 2021.9.7 Legal Signature Date Ersteller:

Erstelldatum: 07.03.2008 D. Brandhorst Revision: 00 Datum:

00.00.00 Seite 1 von 1