Smart Light User Manual Model: WL-35W 1. Introduction Thanks to use our WL-35W series smart LED Light and before using it, please read this manual carefully for reference. SAFETY & MAINTAINANCE WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may Result in electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS This appliance is for indoor use only Strictly prohibit disassembling this device without authorization. Strictly prohibit placing this device near high magnetic field, which will damage it and make it cant work well. Strictly prohibit making the device exposed to the rain or becoming damp. Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect There may be no naked part when the plug is in the Prevent children from direct use of this Product. Please pull out the plug before clearing this Product Please deal with the scrap device according to related the appliance. socket. using dry cloth. rule. CAUTION!
THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE;WHEN THE LIGHT SOURCE REACHES ITS END OF LIFE THE WHOLE LUMINAIRE SHALL BE REPLACED RF exposure statement This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Cet quipement est conforme l'exemption des limites d'valuation habituelle de la section 2.5 de la norme RSS-102. Il doit tre install et utilis une distance minimale de 20 cm entre le radiateur et toute partie de votre corps. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any received, including interference that may cause undesired operation. NOTE 1: This equipment has been interference a in tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to communications. However, radio that guarantee no is there in a interference will not occur If particular this cause harmful equipment does installation. interference to radio or television reception, which can be determined by turning the equipment off and on, is encouraged to try to the user correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 1. Product Overview Mode/Dim DC 12V input Mode/Dim:Press Mode/Dim key to select white light 2.KEY function description luminance level or enter RGB mode. 3. How to use the product White light Mode: Press Mode/Dim key on the top for a 2. Light/SNO OZE 3. Passive Speaker 4.
+12V DC input 5. Active short time to select white light luminance level between Low/Middle/High/Offmode. RGB light Mode:Press Mode/Dim key on the top for a long time to switch RGB light mode,the light color automatic working cycle,press Mode/Dim key for a short time to select current color and press Mode/Dim key for a long time again to exit RGB mode. 4. How to use smart home function 4.1. The smart light supports linkage via mobile device to Smart Control Network, like Amazon Echo series, Google Home etc. 4.1.How to use mobile devices to control the Smart Light. 4.1.1Download TUYA APP from Apple APP Store or Google Play Store, or scan the QR code below. 4.1.2 Prepare for paring: Open the TUYA app, register and login. Click the + button on the upper-right coner to add device, and click all devices button, click lighting devices button to enter paring mode. 4.1.3 Paring: Pressing the Mode/Dim Key on the top of the light (longer than 10 seconds), the light will be change the mode between white light mode/RGB light Mode/Smart paring mode(white light flashing)/Compatibility paring mode(Red light flash). The white light flashing means the smart paring mode is activated. User can pare and add device or rename device. Note:
I. Smart Mode:White Light Flash II. Compatibility mode:Red light flash III. If you want tocancel or exit paring,Pressing the Mode/Dim Key on the top of the light (longer than 10 seconds until the white light turn on again and stop flash. 4.1.4 Device linkage or anto control are available by Scene Setup on the mobile device via TUYA APP. Remark: Device linkage function needs TUYA Smart control compatible. 4.2 Use Amazon Echo series for Alexa voice control. 4.2.1 Install the Amazon Echo APP 4.2.2 Connect the Amazon Echo and the Smart Light in the same network in Echo APP 4.2.3 In SKILL section, search device with the name of TUYA SMART to add the light that already been named in TUYA APP. 4.2.4 Now you can use voice command to control the smart light via Amazon Echo. Voice command examples:
Alexa, discover my smart home devices Alexa, turn on the device name Alexa, turn off the device name Alexa, set the device name to red Alexa, change the device name to the color blue Alexa, make the device name warm white Alexa, increase device name by thirty percent Alexa, decrease device name by twenty percent 5. Technical Parameters Model No. WL-35W Input Voltage DC12V/0.6A White light power 6W Max Luminance
>450lm Color Temperature 2900-3100K CRI
>80 Luminance level 4level(Low/Mid/High/Off) RGB light Power 3W Colors 16 millions Product net weight (g) 410 g Working temperature 0--40 Unit size(LXWXH) 100X206mm V1.0 Made in China