CSR Harmony Help Adding a Bluetooth device To add a Bluetooth device:
From the Notification area From My Bluetooth Devices Dependent on the device type, you can also connect to your computer from the remote device. See Connecting from the remote device. Fromthe Notification area:
1. Ensure the device is turned on, has Bluetooth enabled and is discoverable. 2. In the Notification area, right-click the Bluetooth icon, select Add Bluetooth Device and choose the device type you want to add:
3. The Add Bluetooth Device window opens. All discoverable Bluetooth devices of the chosen type, which are in range, will be displayed. Click on the device you want to connect to and click Next:
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 4. You may be prompted to enter a pairing code on the device. The code may be entered on your phone handset using the number pad or using the device's keyboard. When prompted on your device, enter the pairing code:
If a pairing code is displayed on both your PC and the remote device, accept or confirm on both. 5. Click Finish to complete adding a Bluetooth device. FromMy Bluetooth Devices:
1. Ensure the device is turned on, has Bluetooth enabled and is discoverable. 2. In My Bluetooth Devices, click Add Bluetooth Device and choose the device type you want to add:
Back to top 3. The Add Bluetooth Device window opens. All discoverable Bluetooth devices of the chosen type, which are in range, will be displayed. Click on the device you want to connect to and click Next:
4. You may be prompted to enter a pairing code on the device. The code may be entered on your phone handset using the number pad or using the device's keyboard. When prompted on your device, enter the pairing code:
If a pairing code is displayed on both your PC and the remote device, accept or confirm on both. 5. Click Finish to complete adding a Bluetooth device. Connecting fromthe remote device:
1. Ensure the device is turned on, has Bluetooth enabled and is discoverable. 2. Initiate pairing from the Bluetooth device. This will usually require you to create a pairing code on your device. In this example, the code "0000" is used. Refer to the documentation that came with your device for more information about discovering other Bluetooth devices. 3. CSR Harmony will indicate your device is trying to connect to your computer, click it to allow the connection:
Back to top 4. When prompted, enter the pairing code and click Next:
If a pairing code is displayed on both your PC and the remote device, accept or confirm on both. 5. Click Finish to complete adding a Bluetooth device. Using Secure Simple Pairing:
Secure simple pairing enables you to connect from a remote device where you are not required to enter a pairing code, but simply confirm one on your device. If your device supports Secure Simple Pairing:
1. Initiate pairing from the Bluetooth device. CSR Harmony will indicate your device is trying to connect to your computer, click it to allow the connection:
2. A code is displayed on screen and on your device, all you need to do is confirm that the two codes are the same:
3. On your device, check and confirm that the codes are the same, then click Next. 4. Click Finish to complete adding a Bluetooth device. Automatically accepting connections Automatic connection allows a device to re-connect without prompting for user action on future connections. You can enable automatic connection on a known device by:
1. In My Bluetooth Devices, right-click the device and select Properties:
Back to top 2. The Device Properties window will open. Tick the Automatically accept connections from this device box and click Apply or OK:
Back to top Bluetooth device icons Icon Description Laptop PC Desktop PC Personal Digital Assistant (PDA) Stereo Headset or Headphones Mono Headset Loudspeaker Camera Mouse Keyboard Gamepad or Game controller Modem Network Access Point Printer Mobile Phone Remote Control Bluetooth low energy security device Health Device, e.g. Weighing Scales or Heart-rate Monitor A device of unknown type or a device who's type could not be determined Back to top Feedback Document History Trademarks 2010-2011 CSR plc. All rights reserved | Bluetooth is a trademark owned by the Bluetooth SIG., Inc. CSR plc is a company registered in England. Registered office: Churchill House, Cambridge Business Park, Cowley Road, Cambridge, CB4 OWZ Registered Number: 04187346 | VAT number (GB787433096)