E-TAXFREE NORDIC OY TF1 E-POS MINI Quick Reference Guide Edition: Aug 2015 Version: 1.2 E-POS MINI TF1 E-TAXFREE NORDIC OY Packing Checklist Confirm that all the following items are contained in the carton. If any item is missing or damaged, Contact E-Taxfree Nordic Oy for replacement. Quick Reference Guide AC Adapter E-POS MINI Power Cord Mounting Security Lock X1 X1 X1 X1 X1 Safety Notices Observe the following safety measures at all times to prevent bodily injury or damage of your product. Throughout the manual carefully prior to initiations. To avoid the risk of electric shock: Do not attempt to disassemble this product. Contact E-Taxfree Nordic Oy for replacement. The product does not contain consumer replaceable components. Contact E-Taxfree Nordic Oy for replacement. Before power connection, be sure to use the correct AC voltage that is between AC100V~ AC240V. Make sure that the product is powered off prior to any device installation. I/O Interface E-POS MINI TF1 No. Port Power Button Power Cord Mounting Description Power on/off Switch Power cable locked USB 2 x USB 2.0 Type A No. Port Description POWER
(DC Input) scanner DC 5V / 3A 2D scanner
(Motorola engine) Lock Security Lock That way you can lock the security cable to the E-POS MINI case, and loop the cable other end around a fixed object. Once the case and cable are locked together, thieves can't detach the case without damaging the E-POS MINI. E-TAXFREE NORDIC OY Appearance Front View Side View B 2D scanner (Motorola engine) D F Security Lock A MRZ scanner C E Side View Tilt angle 55 ~ 10 degree(45Default) 5" TFT LCD Display screen Base Speaker E-POS MINI TF1 USING YOUR E-POS MINI For first-time use, you need to Plug your E-POS MINI Connect the power connector and plug the AC adapter side into any AC outlet. Step 1 Choose the sleeve size of the power cord retainer based on the thickness of the cord. The smaller sleeve can be snapped off and used for thin cords. Step 2 Slide the retainer around the AC power cord, and pass it around the loop on the switch. Step 3 Slide the retainer through the first latch. Step 4 Slide the retainer through the other latches to lock it. Power on for the first time To turn on your E-POS MINI, press and hold the power button until you see the Android logo. Wait a moment for your E-POS MINI to boot up. You will then be asked some questions before you can use your E-POS MINI. If the E-POS MINI screen turns off, it has entered sleep mode. Briefly press the power button to wake it up. E-TAXFREE NORDIC OY USING THE TOUCHSCREEN Your E-POS MINI uses a touch screen for selecting items and entering information. Use your finger to tap the screen. Tap: Touch the screen once to open items and select options. Drag: Hold your finger on the screen and drag across the screen to select text and images. Tap and hold: Tap and hold an item to see a list of actions available for that item. On the pop-up menu that appears, tap the action you want to perform. Scroll: To scroll up or down the screen, simply drag your finger up or down the screen in the direction that you want to scroll. The Home screen When you start your E-POS MINI, or wake it from power saving, it will display the Home screen. This screen gives you quick access to information and simple controls with widgets or shortcuts to apps. Widgets display information such as the time and weather, or provide additional controls and direct access to applications. Some have been preinstalled on your E-POS MINI. The Home screen features some useful controls and information. MRZ passport scanner E-POS MINI TF1 E-TAXFREE NORDIC OY Scanner Skew, Pitch, and Roll Measured on a 20 mil Code93 and QR code symbol at a distance of 5 inches. Tolerance for skew and pitch is reduced at extreme ends of the working range. lists the typical and guaranteed distances for selected barcode densities. The minimum element width (or symbol density) is the width in mils of the narrowest element (bar or space) in the symbol. Note: Typical performance at 73F (23C) on high quality symbols in normal room light. Specification Model Name TF1 E-POS MINI TF1 System Processor ROM ROM Display Size Resolution Touch Panel OS Support Interface USB Wired LAN 3G Speaker 2D Scanner MTK MT6582V 8GB 1GB 5" TFT LCD 960 x 540 pixels Capacitive Android 4.4 2(5V/0.2A) 802.11b / g / n Micro Sim Card - Yes Yes Motorola SE-4500DL 2D Scanner Passport Scanner Elyctis MRZ Scanner ID3 Adjustable Angle Audio Supported Video Supported Power Supply From 55-10(total 45) WMA, MP3, MIDI, AMR, AAC 3GP, MP4, AVI DC 5V / 3A Laser Emission wavelength 640-660nm Laser Output power 0.71mW Peak Environment Operating Temperature 5C ~ 40C Storage Temperature
-20C ~ 60C Operating Humidity Storage Humidity 15% ~ 80% RH 20% ~ 90% RH Mechanical Housing Color White Dimension(W x D x H) 173 x 145.8 x 108 mm Weight Product specification is subject to change without prior notice. 1 kg E-TAXFREE NORDIC OY Federal Communications Commission (FCC) Statement The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. E-POS MINI TF1 Bluetooth This equipment manipulates the Bluetooth V4.0 and low energy (BLE) system that operates at 2402 MHz ~ 2480 MHz with 79 channels available, The modulation type have GFSK, 8-DPSK and DQPSK. It also features a WLAN coexistence interface controller, and integrated Class 1.5 Power Amplifiers (PAs) to address the needs of mobile devices that require minimal power consumption and compact size. Wi-Fi The Wi-Fi complies with IEEE 802.11 b/g/n standard and it could achieve up to a speed of 72.2Mbps with single stream in 802.11n draft, 54Mbps as specified in 802.11g, or 11Mbps for 802.11b to connect to the wireless LAN. Frequency range 2.400 GHz ~ 2.497 GHz (2.4 GHz ISM Band), the 802.11b modulation have DQPSK, DBPSK and CCK, that 802.11 g/n modulation have OFDM /64-QAM,16-QAM, QPSK and BPSK. Number of channels support ch1~ch11. E-TAXFREE NORDIC OY E-POS MINI TF1 E-TAXFREE NORDIC OY Tammasaarenlaituri 3 | 00180 Helsinki | Finland Phone: +358 10 5044 040 www.e-taxfree.com