User Guide 9 &) aoa, ie C) 4 LCD Color Video Monitor
+ Please read the fllowing instructions and safety warnings before you install the Video Monitor.
* Please retain these instructions for future reference
* Tool needed: Screwdriver (not included) for mounting the camera the wall if needed
+ Additional cameras) (sold separately). A Important Safety Warnings NE Strangulation Hazard - Children have STRANGLED incords. Keep this cord out of the reach of children
(more than 3 feet (0.9 m) away). To prevent cord entanglement and strangulations:
+ Do not place the Camera or AC adaptor cord within reach of children.
+ Do not place the Camera or AC adaptor cord in, or attach it to, a crib or playpen,
+ Always fasten the AC adaptor cord of the Camera on the walll with the security clips provided.
+ Never use extension cords with AC adaptors. Use only AC adaptors provided. Important Safety Instructions:
Adult assembly is required. Keep small parts away from childs reach,
+ This product isnot a toy. Do not allow children to play with it
+ This Video Monitor is nota substitute for responsible adult supervision,
+ Test the Video Monitor and al it functions so that you are familar with it prior to actual use.
+ When the power adaptor is plugged into an electrical outlet, do not touch the exposed end. Caution risk of heat generation, fire or explosion.
+ Li-ion battery is built into the produc.
+ Charge the product by the designated charging method
+ Do not place the product in or near fie, or put the product in a microwave.
+ Do not expose the product to high temperatures above 140 F
+ Do not disassemble the product.
+ Do not expose the product to excessive shack such as drooping froma high place.
+ Keep the product dry. Dispose of the product appropriately. e U your Video Monito Auto View Orientation ~ Portrait to Landscape Your Video Monitor is able to switch from Portrait to Landscape view, simply place the Monitor in the upright position for Portrait View and lay it on its side for Landscape View. Note: There is a one second delay when switching views, this is @ normal function, Night Vision Mode The Camera features 6 Infrared LEDs around the lens designed to capture clear images in dark environments or at night. When the Light Sensor detects low light levels, the Night Vision Mode will automatically activate and the video shown in the Monitor will display in black and white Charging the Battery Your Video Monitor has an intemal, replaceable, 2300mah lithium-ion rechargeable battery. Charge the battery by connecting the Monitor to a power outlet using the power cord provided Video ON/OFF This feature allows you to turn the video screen OFF while maintaining the audio monitor ON. Simply press the Video ON/OFF key to turn the video screen ON or OFF. IMPORTANT:
When the Monitor is on power save mode, the Video Screen will automatically turn OFF after 30s, 60s, 90s depends on VOX setup. This sleep mode helps conserve battery power. To turn video back ON, simply press the Video ON/OFF button, 2. Package included. 1X camera 1X monitor with 2300mAh ot rechargeable Li-battery ef] 2 X switch power adaptors
1 X user manual eB o o o 1. Connect Camera to AC outlet 2. Camera works automaticaly 3, Disconnect the power from the camera, o camera automatically switch off. Bo a G@
Put the camera on a flat area or hang it on the wall, see the Demo, a a 41. Connect Monitor to AC outlet. 2. Long perss the Return/Power key , the monitor turns to start to work A 2.Anch Fl view LCD display Carmera paired (Default) A. Infrared LED lights 3. The Monitor and Camera are tuned on, video captured by the Baby B_ Lullaby on/off The baby monitor is already paired as default, you do not need to pair the B Camera Lens unit will appear on the video screen, LeD/Alarm key camera and the monitor unless you reset your camera. For pairing each Light sensor 4. While Pressing OK/Talk key to have talk back to the camera, D_ Microphone other please long press the @/p button on the Monitor,or take a D_ Power Indicator release OK/Talk key to hear the baby voice E Speaker reference from Ut definition, Camera page E Microphone 6. Power Indicator: F _ Return/Power key F Speaker Charging - Red light on, GOK/Talk key Power Indicator G Temperature sensor Full- Green Igiht on; H_ Camera/Pair key Working- Green Light on; H Antenna Battery short capacity- Red light slow flash 1 Power Indicator Pairing- Green light fash 1 Pair/Reset 7. Signal Indicator: Signal Indicator J AC Adapter Jack Working Green Light on; J Belt cip K Wall Mount Out of range -Red light on; K Volume Up Pairing- Green light flash L_ Volume Down M_ AC Adapter Jack 4. Menu Options:
1. Monitor showing opening image 2. Ifthe monitor does not pai, the monitor will enter into Pairing mode 3. dd Lullaby When playing Lullaby, press Vorto adjust Lullaby Volume 4. Egy LCD/Alerm Short press for opening LCD (LCD on/off) Pressit 4 seconds enterinto Alarm setting 5. We OK Talk back In menu operation, short press refers to confirm options In ideo mode Hold on OK buttonrefers to talk back 6. Go Return / Power In menu operation, Return icon refers to Return Pressit 4 seconds to turns on/off 7. O/P Camera / Pair Invideo mode, short press refers to camera switch Long press refers to pait Memo: Multi camera pariring must go to the Setting mode;
short way pairing does not work for 2nd camera pairing, Press UP/Down to adjust the brightness, press OK button to confirm and get into last MENU Press RETURN button back to Last Menu without changes Brightness. Four Options: 305.605.90S.NEVER Press UP/Down to choose the options, press OK button to confirm and get into last MENU Von Press RETURN button back to Last Menu without changes. Four Alarm Options Press UP/Down to adjust alarm Hour/Minute, press OK button to shift to Hour/Minute, Press RETURN button get into last MENU. When choose XX: XX, Press OK button, Alarm shut off, and return to last Menu No matter Hour or Minute isin XX, the other jumps into XX status Press UP/Down to adjust, press OK to confirm and back to Video Press RETURN button back to last Menu without any changes In camera mode, press UP/Down choose the needed camera (4), press OK to confirm to next Sub-menu In camera Sub-menu, press OK to pair; after pairing showing video or pairing fal Press RETURN button back to last Menu without any changes Camera Press UP/Down to choose Temperature unit, press OK to confirm and back to last Menu
& TEMP press RETURN button back t last Meru without any changes Time Pes UP/Down! to setup H/M, Press OK to shit'H/M;
Press RETURN button to confirm and back to last Menu. EE] Date es U%Down! to setup YIM/0, PessOK to shit Y/IM/D, setting Press RETURN button to confirm and back to last Menu. 1,23 Loop Option F2 Lullaby Press Up/Down to choose, press OK to confirm and back to last Menu Press RETURN button back to last Menu without ary changes. Troubleshooti No video display on screen
+ Are the Monitor and Camera plugged in to @ working electrical outlet?
Make certain any light switches that control power to the wall outlet are ON.
= Check for pinched power cords.
+ Are the Monitor and Camera turned ON?
=To turn Monitor ON.
=o connect the camera into the wall plug
+ Isthe Monitor in sleep mode?
= Press the Video ON/OFF key to turn the display ON. Monitor lost signal, Out of Range
+ If there is no connection, the words Out of Range will be shown on the video display.
+ Make certain that the Camera is turned ON, the green LED Power On indicator should be lit
+ The Monitor may be too far away from the Camera, bring the Monitor closer to the Camera
+ The Camera could have ost its connection to the Monitor. Pair the Units by following the Pair a Camera instructions. Ensure that the Monitor and Camera are away from obstacles that may interfere with the signal such as; walls, floors, ceilings, Wi-Fi routers, microwave ovens, cordless phones, Bluetooth devices, home computers, among other electronic devices. It is recornmended to keep your Video Monitor away from these types of devices at least 5 feet. Ifthe signal is weak, try moving the Monitor and/or Camera to different positions in the rooms. Video on screen is in black and white The Camera isin a dark environment and Night Vision Mode has been activated Ensure that the Camera isin a well-lit environment to de-activate Night Vision Mode. Audio Feedback
+ The units may be too close, move the Monitor further away from the Camera,
+ Look for any noise source in babys room. Remove noise source or move Camera away from the source Monitor not responding (frozen or unresponsive)
+ Switch off and on the monitor. 6. FCC and IC Regulations:
FCC Notices The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
(1) This device may not cause harmful interference, and
(2] this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
=Reorienting or relocating the receiving antenna
= Increasing the distance between the equipment and receiver
=Connecting the equipment to an outlet on a circuit which is different from the one the receiver is connected to Consult a qualified expert for help @
Wee (yal elas To dean your Video Monitor, disconnect all cables and tun OFF Use a soft lint-free doth. Avoid getting moisture in openings. Maintain your Video Monitor away from direct sunlight, hot or humid areas. Do not let product get wet. FCC Notices Note: This equipment has been tested and found to comply with the rules for white space devices, pursuant to part 15 of the FCC rules. These rules are designed to provide reasonable protection against harmful interference. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. _ Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the manufacturer, dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.