all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
USERS MANUAL | Users Manual | 2.86 MiB | August 03 2012 | |||
1 2 | Test Report | August 03 2012 | ||||||
1 2 | Attestation Statements | August 03 2012 | ||||||
1 2 | Cover Letter(s) | August 03 2012 | ||||||
1 2 | External Photos | August 03 2012 | ||||||
1 2 | Internal Photos | August 03 2012 | ||||||
1 2 | ID Label/Location Info | August 03 2012 | ||||||
1 2 | Cover Letter(s) | August 03 2012 | ||||||
1 2 | Test Report | August 03 2012 | ||||||
1 2 | Test Report | August 03 2012 | ||||||
1 2 | Test Setup Photos | August 03 2012 | ||||||
1 2 | Test Report | August 03 2012 | ||||||
1 2 | RF Exposure Info | August 03 2012 |
1 2 | USERS MANUAL | Users Manual | 2.86 MiB | August 03 2012 |
Comment Apply Changes & Reset You can add comments for this regulation. Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. Current Filter Table Delete Selected & Delete All Reset It will display all ports that are filtering now. Click Delete Selected will delete the selected item. Click Delete All will delete all items in this table. You can click Reset to cancel. Port 80 has been blocked as the following illustrate. IP: 192.168.1.x Port: 80-80 5.2.2 IP Filtering When enabled, LAN clients are blocked / filtered from accessing the Internet based on their IP addresses. http://www.sapido.com.tw/
51 User Manual v1.0.0 Item Enable IP Filtering Local IP Address Protocol Comment Apply Changes & Reset Description Please select Enable IP Filtering to filter IP addresses. Please enter the IP address that needs to be filtered. Please select the protocol type of the IP address You can add comments for this regulation. Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. Current Filter Table Delete Selected & Delete All Reset It will display all ports that are filtering now. Click Delete Selected will delete the selected item. Click Delete All will delete all items in this table. You can click Reset to cancel. 5.2.3 MAC Filtering When enabled, filtering will be based on the MAC address of LAN computers. Any computer with its MAC address on this list will be blocked from accessing the Internet. Item Enable MAC Filtering MAC Address Comment Apply Changes & Reset Description Please select Enable MAC Filtering to filter MAC addresses. Please enter the MAC address that needs to be filtered. You can add comments for this regulation. Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. Current Filter Table Delete Selected & Delete It will display all ports that are filtering now. Click Delete Selected will delete the selected item. Click Delete All http://www.sapido.com.tw/
52 User Manual v1.0.0 All Reset will delete all items in this table. You can click Reset to cancel. 5.2.4 URL Filtering URL Filtering is used to restrict users to access specific websites in internet Item Enable URL Filtering URL Address Apply Changes & Reset Description Please select Enable MAC Filtering to filter MAC addresses Please enter the MAC address that needs to be filtered. Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. Current Filter Table Delete Selected & Delete All Reset It will display all ports that are filtering now. Click Delete Selected will delete the selected item. Click Delete All will delete all items in this table. You can click Reset to cancel. Notes: This function will not be in effect when the Virtual Server is enabled. Please disable Virtual Server before activate the URL Filtering function. 5.2.5 QoS The QoS can let you classify Internet application traffic by source/destination IP address and port number. To assign priority for each type of application and reserve bandwidth can let you have a better experience in using critical real time services like Internet phone, video conference etc. http://www.sapido.com.tw/
53 User Manual v1.0.0 Item Enable QoS Description Check Enable QoS to enable QoS function for the WAN port. You also can uncheck Enable QoS to disable QoS function for the WAN port. Automatic uplink speed /
Manual Uplink Speed Automatic downlink speed / Manual Downlink Speed Set the uplink speed by manual to assign the download or upload bandwidth by the unit of Kbps or check the Automatic uplink speed. Set the downlink speed by manual to assign the download or upload bandwidth by the unit of Kbps or check the Automatic downlink speed. QoS Rule Advance Setting:
Address Type Local IP Address MAC Address Mode Bandwidth Comment Set QoS by IP Address or MAC address Set local IP Address if the address type is by IP Address Set MAC Address if the address type is by MAC Address Select Guaranteed minimum bandwidth or Restricted maximum bandwidth Key in the bandwidth. Write your comment here. http://www.sapido.com.tw/
54 User Manual v1.0.0 Apply Changes & Reset Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. 5.2.6 Denial of Service Item Enable DoS Prevention Description Check Enable DoS Prevention to enable DoS function for prevention. You also can uncheck Enable DoS Prevention to disable DoS function. 5.2.7 VLAN Settings http://www.sapido.com.tw/
55 User Manual v1.0.0 Description Add VLAN tag to packet Set VLAN ID1~4096 It indicates the frame priority level. Values are from 0 (best effort) to 7 (highest); 1 represents the lowest priority Enable or Disable CIF Item Tag VID Priority CIF 5.3 Server Setup 5.3.1 FTP http://www.sapido.com.tw/
56 User Manual v1.0.0 Description FTP server start or stop Item Enable FTP Server Enable Anonymous to Login Enable FTP Access from WAN FTP Server Port Idle Connection Time-Out FTP process should have an idle timeout, which will terminate the Allow user access device FTP server from WAN sideinternet Agree anonymous account login to FTP server Default FTP server port is 21 process and close the control connection if the server is inactive (i.e., no command or data transfer in progress) for a long period of time 5.3.2 Webcam server http://www.sapido.com.tw/
57 User Manual v1.0.0 1. USB port information Show Link webcam information 2. Enabling webcam Enable or disable the webcam 3. Control from the WAN side Whether to allow viewing webcam images from the WAN 4. Port webcam 5. Connection port view webcam 6. View live webcam video watch 7. Record Setup Recording interval How often take an image Video Storage Providing native USB storage device and a remote FTP server for storing images taken http://www.sapido.com.tw/
58 User Manual v1.0.0 image format Provide two formats AVI and JPG remote FTP location If the captured image saved to a remote FTP location, be Zhen into a remote FTP location Remote FTP Port FTP port used by remote remote FTP login account Login account used by the remote FTP remote FTP Password Login password used by the remote FTP folder location remote FTP Login Login to remote FTP server can be set after the folder location used by maximum amount of shootingHow many files in one folder Notea JPG file size is about 13KB, and AVI file size is about 45127KB
(when maximum recording frames is 1000), file size may vary due to webcam models have different sizes http://www.sapido.com.tw/
59 User Manual v1.0.0 Chapter 6 Advanced Setup You can find advanced settings in this section. Router Mode only. AP Mode only. WiFi AP Mode only. 6.1 Dynamic DNS Setting You can assign a fixed host and domain name to a dynamic Internet IP address. Each time the router boots up, it will re-register its domain-name-to-IP-address mapping with the DDNS service provider. This is the way Internet users can access the router through a domain name instead of its IP address. Note: make sure that you have registered with a DDNS service provider before enabling this feature. Please enter Domain Name, User Name/Email, and Password/Key. After entering, click on Apply Changes to save the setting, or you may click on Reset to clear all the input data. Item Enable/Disable DDNS Service Provider Description Select enable to use DDNS function. Each time your IP address to WAN is changed, and the information will be updated to DDNS service provider automatically. Choose correct Service Provider from drop-down list, here including DynDNS, TZO, ChangeIP, Eurodns, OVH, NO-IP, ODS, Regfish embedded in GS293d. http://www.sapido.com.tw/
60 User Manual v1.0.0 User Name/Email Password/Key Apply Changes & Reset User name is used as an identity to login Dynamic-DNS service. Password is applied to login Dynamic-DNS service. Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. 6.2 Wireless Advanced Setup In Advanced Settings page, more 802.11 related parameters are tunable. http://www.sapido.com.tw/
61 User Manual v1.0.0 Item Fragment Threshold RTS Threshold Beacon Interval Preamble Type IAPP Protection Aggregation Short GI Description To identify the maxima length of packet, the over length packet will be fragmentized. The allowed range is 256-2346, and default length is 2346. This value should remain at its default setting of 2347. The range is 0~2347. Should you encounter inconsistent data flow, only minor modifications are recommended. If a network packet is smaller than the present RTS threshold size, the RTS/CTS mechanism will not be enabled. The router sends Request to Send (RTS) frames to a particular receiving station and negotiates the sending of a data frame. After receiving an RTS, the wireless station responds with a Clear to Send (CTS) frame to acknowledge the right to begin transmission. Fill the range from 0 to 2347 into this blank. Beacons are packets sent by an access point to synchronize a wireless network. Specify a beacon interval value. The allowed setting range is 20-1024 ms.. PLCP is Physical layer convergence protocol and PPDU is PLCP protocol data unit during transmission, the PSDU shall be appended to a PLCP preamble and header to create the PPDU. It has 2 options: Long Preamble and Short Preamble. Inter-Access Point Protocol is a recommendation that describes an optional extension to IEEE 802.11 that provides wireless access-point communications among multivendor systems. Please select to enable wireless protection or not. Enable this function will combine several packets to one and transmit it. It can reduce the problem when mass packets are transmitting. Users can get better wireless transmission efficiency when they enable this function. RF Output Power Users can adjust RF output power to get the best wireless network environment. Users can choose from 100%, 70%, 50%, 35%, and http://www.sapido.com.tw/
62 User Manual v1.0.0 15%. Apply Changes & Reset Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. 6.2.1 Wireless Site Survey This function provides users to search existing wireless APs or wireless base stations from ISP. You can connect to a wireless AP manually in Wi-Fi AP mode. The designed AP will appear on SSID column in Wireless Basic Setup page. Please click on Refresh to refresh the list. Click Connect after select an existing AP to connect. 6.2.2 WPS This page allows user to change the setting for WPS (Wi-Fi Protected Setup). Using this feature could let your wireless client atomically synchronize its setting and connect to the Access Point in a minute without any hassle. GS293d could support both Self-PIN or PBC modes, or use the WPS button (at real panel) to easy enable the WPS function. PIN model, in which a PIN has to be taken either from a sticker label or from the web interface of the WPS device. This PIN will then be entered in the AP or client WPS device to connect. PBC model, in which the user simply has to push a button, either an actual or a virtual one, on both WPS devices to connect. Please follow instructions below to enable the WPS function. 1. Setup Wireless LAN with WPS PIN :
(1). Get the WPS PIN number from wireless card and write it down. http://www.sapido.com.tw/
63 User Manual v1.0.0
(2). Fill in the PIN number from the wireless card in Client PIN Number field, and then click Start PIN.
(3). Click PIN from Adapter Utility to complete the WPS process with the wireless router. http://www.sapido.com.tw/
64 User Manual v1.0.0 2. Start PBC:
(1). Press the WPS button (A) from GS293d and wait for Wireless/WPS LED light (B) changed into orange.
(2). Press the WPS button (C) from the adapter until the setup window shows up.
(3). Open a web browser to check the internet connection. Please also refer to section 4.1.1 WPS setup for more details. 6.3 System Management This section including Change Password, Firmware Upgrade, Profiles Save, Time Zone Setting, UPnP Setting, VPN Passthrough Setting, and Language Setting. It is easy and helpful for users making more detailed settings. http://www.sapido.com.tw/
65 User Manual v1.0.0 6.3.1 Statistics It shows the packet counters for transmission and reception regarding to Ethernet networks http://www.sapido.com.tw/
66 User Manual v1.0.0 6.3.2 Change Password Users can set or change user name and password used for accessing the web management interface in this section. Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. 6.3.3 Firmware Upgrade This function can upgrade the firmware of the router. There is certain risk while doing firmware upgrading. Firmware upgrade is not recommended unless the significant faulty is found and published on official website. If you feel the router has unusual behaviors and is the website not ISP and environment. You caused by check can the http://www.sapido.com.tw/
67 User Manual v1.0.0
(http://www.amigo.com.tw) to see if there is any later version of firmware. Download the firmware to your computer, click Browser and point to the new firmware file. Click Upload to upgrade the firmware. You cant make any move unless the machine reboot completely. Caution: To prevent that firmware upgrading is interrupted by other wireless signals and causes failure. We recommend users to use wired connection during upgrading. Note: The firmware upgrade will not remove your previous settings. Reset button:
On the front of this router, there is a reset button. If you cannot login the administrator page by forgetting your password; or the router has problem you cant solve. You can push the reset button for 5 seconds with a stick. The router will reboot and all settings will be restored to factory default settings. If the problem still exists, you can visit our web site to see if there is any firmware for download to solve the problem. 6.3.4 Profile Save Users can create a backup file that contains current router settings. This backup file can be used to restore router settings. This is especially useful in the event you need to reset the router to its default settings. http://www.sapido.com.tw/
68 User Manual v1.0.0 1. Save Configuration
(1). Click Save
(2). Please click Save to save the configuration to your computer.
(3). Select the location which you want to save file, then click Save. 2. Load configuration file
(1). Click Choose File http://www.sapido.com.tw/
69 User Manual v1.0.0
(2). Select configuration file then click Open
(3). Click Upload to upload configuration file to GS293d.
(4). After 90 seconds, GS293d will reboot automatically. 3. Reload factory default setting
(1). Please click Reset http://www.sapido.com.tw/
70 User Manual v1.0.0
(2). Please click OK to start reload factory default setting to GS293d.
(3). After 90 seconds, GS293d will reboot automatically. 6.3.5 Remote Manager Item HTTP Connection Port Enable Web Server Access on WAN Description Users can access GUI by this portdefault is 80 Allow user access GUI from WAN side 6.3.6 Time Zone Setting http://www.sapido.com.tw/
71 User Manual v1.0.0 Users can synchronize the local clock on the router to an available NTP server (optional). To complete this setting, enable NTP client update and select the correct Time Zone. Item Current Time Time Zone Select Enable NTP client update Automatically Adjust Daylight Saving NTP Server Description Users can input the time manually. Please select the time zone. Please select to enable NTP client update or not. Please select to enable Automatically Adjust Daylight Saving or not. Please select the NTP server from the pull-down list, or you can enter the NTP server IP address manually. Apply Changes & Reset &
Refresh Please click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. Or you may click on Refresh to update the system time on the screen. 6.3.7 UPnP Setting http://www.sapido.com.tw/
72 User Manual v1.0.0
UPNP Universal Plug and Play (UPnP) is a standard of networking protocols promulgated by the UPnP Forum. The goals of UPnP are to allow devices to connect seamlessly and to simplify the implementation of networks in the home (data sharing, communications, and entertainment) and in corporate environments for simplified installation of computer components. GS293d supports UPnP function, and can cooperate with other UPnP devices. When you activate UPnP, please click My Network Places. Users will see an Internet Gateway Device icon. By click the icon, users can enter the GUI of the router. If you do not wish to use UPnP, you can disable it.
UPNP AV A UPnP AV media server is the UPnP-server that provides media library information and streams media-data (like audio/video/picture/files) to UPnP-clients on the network. It is a computer system or a similar digital appliance that stores digital media, such as photographs, movies, or music and shares these with other devices. User can plug in USB disk to product USB port and use UPnP AV client to play USB disk media-data
(like audio/video/picture/files) 6.3.8 VPN Passthrough Setting Virtual Private Networking (VPN) is typically used for work-related networking. For VPN tunnels, the router supports IPSec, Pass-through, PPTP Pass-through, and L2TP Pass-through. http://www.sapido.com.tw/
73 User Manual v1.0.0 Item IPSec Pass-through PPTP Pass-through L2TP Pass-through IPV6 Pass-through Description Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange of packets at the IP layer. To allow IPSec tunnels to pass through the router, IPSec Pass-through is enabled by default. To disable IPSec Pass-through , select Disable Point-to-Point Tunneling Protocol is the method used to enable VPN sessions to a Windows NT 4.0 or 2000 server. To allow PPTP tunnels to pass through the router, PPTP Pass-through is enabled by default. To disable PPTP Pass-through, select Disable. To allow the L2TP network traffic to be forwarded to its destination without the network address translation tasks. Allow IPV6 packet to be forwarded to its destination without the network address translation tasks. Apply Changes & Reset &
Refresh Please click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. 6.3.9 Language Setting The GS293d provide 12 languages for Web GUI. You can select the language interface from the dropdown list and by following steps. http://www.sapido.com.tw/
74 User Manual v1.0.0 When you see the screen message change to the selected language, the setup is completed. 6.3.10 Routing Setup Dynamic routing is is a distance-vector routing protocol, which employs the hop count as a routing metric. RIP prevents routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The maximum number of hops allowed for RIP is 15 Static routing is a data communication concept describing one way of configuring path selection of routers in computer networks. It is the type of routing characterized by the absence of communication between routers regarding the current topology of the network.This is achieved by manually adding routes to the router routing table. http://www.sapido.com.tw/
75 User Manual v1.0.0 Item Enable Dynamic Route NAT Transmit Receive Description Enable or Disable dynamic route Enable or Disable NAT function There are 3 options 1. Disabledo not send any RIP packet out 2. Send RIP1 packet out 3. Send RIP2 packet out There are 3 options 4. Disabledo not receive any RIP packet 5. Only receive RIP1 packet 6. Only receive RIP2 packet http://www.sapido.com.tw/
76 User Manual v1.0.0 Item Enable Static Route IP Address Subnet Mask Gateway Metric Interface Description Enable or Disable dynamic route Destination IP address Destination IP subnet mask Gateway IP address for destination Metric number on routers routing table Static route rule for LAN or WAN interface 6.3.11 User Account Settings Set user log on locally used by the FTP server shares account, password 6.3.12 Walk on LAN Schedule Switch your computer ON through your LAN or the Internet . To support WOL you must have a computer with Motherboard that supports WOL, as well as a Network Controller (NIC) supporting this function. Most of the newer Motherboard (circa 2002 and On), have an On Board NIC that supports WOL. Otherwise you need to install a PCI NIC that is WOL capable. http://www.sapido.com.tw/
77 User Manual v1.0.0 6.3.13 Samba Description User can access USB disk without account and password User need account to access USB disklogin account is admin password is not necessary. Item Share mode User mode http://www.sapido.com.tw/
78 User Manual v1.0.0 6.4 Log & Status The category provides Network Config and Event Log status for users to know the operation status. 6.4.1 Network Config Users can check the Internet status under this category, including Firmware version, Wireless setting, Connecting Time, WAN, TCP/IP information. http://www.sapido.com.tw/
79 User Manual v1.0.0 6.4.2 Event Log You may enable the event log feature here. http://www.sapido.com.tw/
80 User Manual v1.0.0 Description Item Enable Log You may choose to enable Event Log or not. System all, Wireless, & DoS Please select the event you want to record. Enable Remote Log Log Server IP Address Apply Changes & Refresh &
Clear Please input the log server IP Address. You may choose to enable the remote event log or not. Click on Apply Changes to save the setting data. Click on Refresh to renew the system time, or on Clear to clear all the record.
* The following figure is an example when users click Apply Changes to record the event log. http://www.sapido.com.tw/
81 User Manual v1.0.0 6.6 App Hyperlinks provide users quick and convenient for users to download with a third-party software on the machine 6.5 Logout This function logs out the user. http://www.sapido.com.tw/
82 User Manual v1.0.0 Chapter 7 Samba Server The GS293d is able to act as a Samba server to share the file on USB storage in local network. 7.1 How to use GS293d as a Samba server 1. Plug in the USB hard disk/Flash. 2. Star your web browser and input \\192.168.1.1. 3. Star My Computer and you will find a folder named sda1. 7.2 Air play
Connect device to router http://www.sapido.com.tw/
83 User Manual v1.0.0
Execute ipod http://www.sapido.com.tw/
84 User Manual v1.0.0 7.3 Printer Server To add an LPR port 1. Open Printers and Faxes. 2. Double-click Add Printer to open the Add Printer Wizard, and then click Next. 3. Click Local printer attached to this computer, clear the Automatically detect and install my Plug and Play printer check box, and then click Next. 4. Click Create a new port, and then click LPR Port. If LPR Port is not available, click Cancel to stop the wizard. To add the LPR port, you need to install the optional networking component, Print Services for Unix. For more information, click Related Topics. 5. Click Next, and then provide the following information:
In Name or address of server providing LPD, type the Domain Name System (DNS) name or Internet Protocol (IP) address of the host for the printer you are adding. The host may be the http://www.sapido.com.tw/
85 User Manual v1.0.0 direct-connect TCP/IP printing device or the UNIX computer to which the printing device is connected. The DNS name can be the name specified for the host in the Hosts file. In Name of printer or print queue on that server, type the name of the printer as it is identified by the host, which is either the direct-connect printer itself or the UNIX computer. 6. Follow the instructions on the screen to finish installing the TCP/IP printer. Notes To open Printers and Faxes, click Start, and then click Printers and Faxes. The Line Printer Remote (LPR) port is best suited to servers that need to communicate with host computers (such as UNIX or VAX computers) by way of RFC 1179. A network-connected printer must have a card that supports LPD for LPR printing to work properly. You can also add ports using the Print Server Properties dialog box. For more information, click Related Topics. Please refer DUT/Network Config page to get name of printer http://www.sapido.com.tw/
86 User Manual v1.0.0 Chapter 8 DDNS Service Application DDNS is a service changes the dynamic IP to the static IP. The settings of DDNS can solve the problem of being given the different IP by router every time. After setting the Router, your host name would correspond to your dynamic IP. Moreover, via the host name application, it could be easier for you to use FTP, Webcam and Printer remotely. Dynamic DNS allows you to make an assumed name as a dynamic IP address to a static host name. Please configure the dynamic DNS below. Please select Dynamic DNS under the IP Config folder, and follow the instructions below to enter the Dynamic DNS page to configure the settings you want. If you dont have a DDNS account, please follow the steps to complete your DDNS with Dynamic IP settings. 1. First access the Internet and fill http://www.dyndns.com/ into the address field of your web browser, then click Create Account. http://www.sapido.com.tw/
87 User Manual v1.0.0 2. Fill in the form as required, and then click on Create Account button. http://www.sapido.com.tw/
88 User Manual v1.0.0 3. When you got this account created message, close it, and check your mailbox. You would get a mail from DynDNS website. 4. Click on the indicated address within your mail to confirm. http://www.sapido.com.tw/
89 User Manual v1.0.0 5. Click on login. 6. Click My Services after logging in. 7. Click Add New Hostname. 8. Put in your favorite hostname and service type, and then click Create Host after finished. http://www.sapido.com.tw/
90 User Manual v1.0.0 9. Your hostname has been created when you see the following page. http://www.sapido.com.tw/
91 User Manual v1.0.0 Chapter 9 Q & A 9.1 Installation 1. Q: Where is the XDSL Router installed on the network?
A: In a typical environment, the Router is installed between the XDSL line and the LAN. Plug the XDSL Router into the XDSL line on the wall and Ethernet port on the Hub
(switch or computer). 2. Q: Why does the throughput seem slow?
A: To achieve maximum throughput, verify that your cable doesnt exceed 100 meter. If you have to do so, we advise you to purchase a bridge to place it in the middle of the route in order to keep the quality of transmitting signal. Out of this condition you would better test something else.
Verify network traffic does not exceed 37% of bandwidth.
Check to see that the network does not exceed 10 broadcast messages per second.
Verify network topology and configuration. 9.2 LED 1. Why doesnt GS293d power up?
A: Check if the output voltage is suitable, or check if the power supply is out of order. 2. The Internet browser still cannot find or connect to GS293d after verifying the IP address and LAN cable, the changes cannot be made, or password is lost. A: In case GS293d is inaccessible; you can try to restore its factory default settings. Please press the Reset button and keep it pressed for over 7 seconds and the light of STATUS will vanish. The LEDs will flash again when reset is successful. 3. Why does GS293d shut down unexpectedly?
A: Re-plug your power adapter. Then, check the STATUS indicator; if it is off, the internal flash memory is damaged. For more help, please contact with your provider. 9.3 IP Address http://www.sapido.com.tw/
92 User Manual v1.0.0 1. Q: What is the default IP address of the router for LAN port?
A: The default IP address is 192.168.1.1 with subnet mask 255.255.255.0 2. Q: I don't know my WAN IP. A: There are two ways to know. Way 1: Check with your Internet Service Provider. Way 2: Check the setting screen of GS293d. Click on Status & Log item to select Network Configuration on the Main Menu. WAN IP is shown on the WAN interface. 3. How can I check whether I have static WAN IP Address?
A: Consult your ISP to confirm the information, or check Network Configuration in GS293d s Main Menu. 4. Will the Router allow me to use my own public IPs and Domain, or do I have to use the IPs provided by the Router?
A: Yes, the Router mode allows for customization of your public IPs and Domain. 9.4 OS Setting 1. Why cant my computer work online after connecting to GS293d?
A: Its possible that your Internet protocol (TCP/IP) was set to use the following IP address. Please do as the following steps. (Windows 2000 & XP) StartSettings Network and Dial-up Connectionsdouble click on Internet Protocol(TCP/IP) select obtain IP address automatically Click on OK button. Then, open Internet browser for testing. If you still cant go online, please test something else below.
Verify network configuration by ensuring that there are no duplicate IP addresses.
Power down the device in question and ping the assigned IP address of the device. Ensure no other device responds to that address.
Check that the cables and connectors or use another LAN cable. 2. Q: Why can't I connect to the router's configuration utility?
http://www.sapido.com.tw/
93 User Manual v1.0.0 A: Possible Solution 1: Make sure that your Ethernet connect properly and securely. Make sure that you've plugged in the power cord. Possible Solution 2: Make sure that your PC is using an IP address within the range of 192.168.1.2 to 192.168.1.254. Make sure that the address of the subnet mask is 255.255.255.0. If necessary, the Default Gateway data should be at 192.168.1.1. To verify these settings, perform the following steps:
Windows 2000, or XP Users:
1. 2. 3. Click on Windows Start > click on Run > input cmd > click on OK button. At the DOS prompt, type ipconfig/all. Check the IP Address, Subnet Mask, Default Gateway data. Is this data correct? If the data isn't correct. Please input ipconfig/release > press Enter >
input ipconfig/renew > press Enter. Possible Solution 3: Verify the connection setting of your Web browser and verify that the HTTP Proxy feature of your Web browser is disabled. Make these verifications so that your Web browser can read configuration pages inside your router. Launch your Web browser. Internet Explorer Users:
1. Click on Tools > Internet Options > Connections tab. 2. Select never dial a connection, click on Apply button, and then click on OK button. 3. Click on Tools and then click on Internet Options. 4. Click on Connections and then click on LAN Settings. 5. Make sure none of the check boxes are selected and click on OK button. 6. Click on OK button. Netscape Navigator Users:
1. Click on Edit > Preferences > double-click Advanced in the Category window. 2. Click on Proxies > select Direct connection to the Internet > click on OK button. 3. Click on Edit again and then click on Preferences. 4. Under category, double-click on Advanced and then click on Proxies. 5. Select Direct connection to the Internet and click on OK button. 6. Click on OK button. 3. Q: Web page hangs, corrupt downloads, or nothing but junk characters is being displayed on the screen. What do I need to do?
http://www.sapido.com.tw/
94 User Manual v1.0.0 A: Force your NIC to 10Mbps or half duplex mode, and turn off the "Auto-negotiate"
feature of your NIC as a temporary measure. (Please look at the Network Control Panel, in your Ethernet Adapter's Advanced Properties tab.) 4. Q: Why can't I connect to the Web Configuration?
A: you can remove the proxy server settings in your web browser. 9.5 GS293d Setup 1. Q: Why does GS293ds setup page shut down unexpectedly?
A: If one of the pages appears incompletely in GS293d s setup pages, please click on Logout item on the Main Menu before shutting it down. Dont keep it working. Then, close Internet browser and open it again for going back to the previous page. 2. Q:
I dont know how to configure DHCP. A: DHCP is commonly used in the large local network. It allows you to manage and distribute IP addresses from 2 to 254 throughout your local network via GS293d . Without DHCP, you would have to configure each computer separately. Its very troublesome. Please Open Internet browser > Input 192.168.1.1 in the website blank field > Select DHCP Server under the IP Config Menu. For more information, please refer to 3.3.2 (Router Mode) or 4.3.1 (AP Mode). 3. Q: How do I upgrade the firmware of GS293d ?
A: Periodically, a new Flash Code is available for GS293d on your product suppliers website. Ideally, you should update GS293d s Flash Code using Firmware Upgrade on the System Management menu of GS293d Settings. 4. Q: Why is that I can ping to outside hosts, but cannot access Internet websites?
A: Check the DNS server settings on your PC. You should get the DNS servers settings from your ISP. If your PC is running a DHCP client, remove any DNS IP address setting. As the router assign the DNS settings to the DHCP-client-enabled PC. 5. Q: GS293d couldnt save the setting after click on Apply button?
A: GS293d will start to run after the setting finished applying, but the setting isnt written into memory. Here we suggest if you want to make sure the setting would be written into memory, please reboot the device via Reboot under System Management directory. http://www.sapido.com.tw/
95 User Manual v1.0.0 9.6 Wireless LAN 1. Q: Why couldnt my wireless notebook work on-line after checking?
A: Generally, Wireless networks can sometimes be very complicated to set up, particularly if you're dealing with encryption and products from different vendors. Any number of variables can keep your workstations from talking to each other. Let's go over some of more common ones. For starters, verify that your router and your workstation are using the same SSID descriptions. SSID acts as a password when a mobile device tries to connect to the wireless network. The SSID also differentiates one WLAN from another, so all access points and all devices attempting to connect to a specific WLAN must use the same SSID. A workstation will not be permitted to connect to the network unless it can provide this unique identifier. This is similar to the function of your network's Workgroup or Domain name. When you're experiencing conductivity problems, it is always best to keep things simple. So next you are going to do is that, please disable any WEP encryption you might have configured. Successful implementation of encryption also includes the use of a shared key. A HEX key is the most common, but other formats are also used. This key identifies the workstation to the router as a trusted member of this network. Different manufacturers can implement this key technology in ways that might prevent them from working correctly with another vendor's products. So pay attention to detail is going to be the key to a successful installation. Next make sure the router and the NIC are configured to use the same communications channel. There are normally 11 of them, and the default channel can also vary from vendor to vendor. You might also want to confirm that the router has DHCP services enabled and an address pool configured. If not, the NIC won't be able to pick up an IP address. I have run across a few access points that offer DHCP services but do not assign all of the needed IP information to the NIC. As a result, I was able to connect to the network, but could not browse the web. The point is, don't assume anything. Verify for yourself that all of the required settings are being received by the workstation. Finally, you might want to keep the system you're trying to configure in the same room as the router, at least during the initial configuration, in order to minimize potential interference from concrete walls or steel beams. http://www.sapido.com.tw/
96 User Manual v1.0.0 2. Q: My PC cant locate the Wireless Access Point. A: Check the following:
Your PC is set to Infrastructure Mode. (Access Points are always in Infrastructure Mode.)
The SSID on your PC and the Wireless Access Point are the same. Remember that the SSID is case-sensitive. So, for example Workgroup does NOT match workgroup.
Both your PC and the Wireless Access Point must have the same setting for WEP. The default setting for the Wireless Router is disabled, so your wireless station should also have WEP disabled. If WEP is enabled on the Wireless Router, your PC must have WEP enabled, and the key must match. If the Wireless Routers Wireless screen is set to Allow LAN access to selected Wireless Stations only, then each of your Wireless stations must have been selected, or access will be blocked.
To see if radio interference is causing a problem, see if connection is possible when close to the Wireless Access Point. Remember that the connection range can be as little as 100 feet in poor environments. 3. Q: Wireless connection speed is very slow. A: The wireless system will connect at highest possible speed, depending on the distance and the environment. To obtain the highest possible connection speed, you can experiment with following:
Access Point location: Try adjusting the location and orientation of the Access Point.
Wireless Channel: If interference is the problem, changing to another channel may show a marked improvement.
Radio Interference: Other devices may be causing interference. You can experiment by switching other devices off, and see if this helps. Any noisy devices should be shielded or relocated.
RF Shielding: Your environment may tend to block transmission between the wireless stations. This will mean high access speed is only possible when close to the Access Point. 4. Q: Some applications do not run properly when using the Wireless Router. http://www.sapido.com.tw/
97 User Manual v1.0.0 A: The Wireless Router processes the data passing through it, so it is not transparent. Use the Special Application feature to allow the use of Internet applications which do not function correctly. If this does solve the problem, you can use the DMZ function. This should work with almost every application, but:
It is a security risk, since the firewall is disabled.
Only one (1) PC can use this feature. 5. Q: I cant connect to the Wireless Router to configure it. A: Check the following:
The Wireless Router is properly installed, LAN connections are OK, and it is powered ON.
Make sure that your PC and the Wireless Router are on the same network
segment. If your PC is set to Obtain an IP Address automatically (DHCP client), restart it. If your PC uses a Fixed (Static) IP address, make sure that it is using an IP Address within the range 192.168.1.129 to 192.168.1.253 and thus compatible with the Wireless Routers default IP Address of 192.168.1.254. Also, the Network Mask should be set to 255.255.255.0 to match the Wireless Router. In Windows, you can check these settings by using Control Panel ~ Network to check the Properties for the TCP/IP protocol. 6. Q: The WinXP wireless interface couldnt communicate the WEP with GS293ds wireless interface. A: The default WEP of WinXP is Authentication Open System - WEP, but the WEP of GS293d is only for Shared Key - WEP, it caused both sides couldnt communicate. Please select the WEP of WinXP from Authentication Open System to Pre-shared Key - WEP, and then the WEP wireless interface between WinXP and GS293d would be communicated. 9.7 Support 1. Q: What is the maximum number of IP addresses that the XDSL Router will support?
A: The Router will support to 253 IP addresses with NAT mode. 5. Q: Is the Router cross-platform compatible?
A: Any platform that supports Ethernet and TCP/IP is compatible with the Router. http://www.sapido.com.tw/
98 User Manual v1.0.0 9.8 Others 1. Q: Why does the router dial out for PPPoE mode very often?
A: Normally some of game, music or anti-virus program will send out packets that trigger the router to dial out, you can close these programs. Or you can set the idle time to 0, then control to dial out manually. 2. Q: What can I do if there is already a DHCP server in LAN?
A: If there are two DHCP servers existing on the same network, it may cause conflict and generate trouble. In this situation, we suggest to disable DHCP server in router and configure your PC manually. 9.9 USB Device 1. Q: How many USB devices can be connected to the Product?
A: GS293d has 2 USB ports. http://www.sapido.com.tw/
99 User Manual v1.0.0 Chapter 10 Appendices 10.1 Operating Systems 1. MicrosoftWindows 2000, XP, Vista, Windows 7. 2. AppleMac OS X 10.4.7, Leopard and the following related versions. 3. LinuxRedhat 9, Fedora 6 & 7, Ubuntu 7.04 and the following related versions. 10.2 Browsers 1. Internet Explorer ver. 6 and 7 and the following related versions. 2. FireFox ver. 2.0.0.11 and the following related versions.3. 3. Safari ver. 3.04 and the following related versions. 10.3 Communications Regulation Information Should any consumers need to learn more information, services and supports, please contact the supplier of your product directly. http://www.sapido.com.tw/
100 User Manual v1.0.0
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-03-08 | 5755 ~ 5815 | DTS - Digital Transmission System | Original Equipment |
2 | 5190 ~ 5230 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2012-03-08
|
||||
1 2 | Applicant's complete, legal business name |
E-Top Network Technology Inc.
|
||||
1 2 | FCC Registration Number (FRN) |
0017794157
|
||||
1 2 | Physical Address |
No. 82, Gongye 2nd Rd.
|
||||
1 2 |
Tainan City, N/A 70955
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
U6A
|
||||
1 2 | Equipment Product Code |
GS293D
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
R****** C******
|
||||
1 2 | Title |
Director
|
||||
1 2 | Telephone Number |
886-6******** Extension:
|
||||
1 2 | Fax Number |
886-6********
|
||||
1 2 |
r******@etopnetwork.com.tw
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 300+300MBPS GIGABIT SERVER ROUTER | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this composite filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a WLAN operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segments are limited to 2422 to 2452 MHz and 5755 to 5815 Mhz. | ||||
1 2 | Power listed is conducted. Operations in the band 5.15-5.25 GHz is restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this composite filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a WLAN operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Compliance Certification Services Inc.
|
||||
1 2 | Name |
K****** C********
|
||||
1 2 | Telephone Number |
886-3******** Extension:
|
||||
1 2 | Fax Number |
886-3********
|
||||
1 2 |
k******@ccsrf.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC MO | 2412 | 2462 | 0.3258 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC MO | 2422 | 2452 | 0.2773 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15C | CC MO | 5745 | 5825 | 0.1574 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15C | CC MO | 5755 | 5815 | 0.1368 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | CC MO | 5180 | 5240 | 0.0136 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | CC MO | 5190 | 5230 | 0.0117 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC