Important safety instruction
........................................................................................... Feature
...................................................................................................................................... Structure
Index to part & control [WL-T1000 Receiver]
Front Panel
Back Panel
Index to part & control [WL-R1000 Receiver]
Front Panel
Back Panel
Function of Remote control
Function of remote
Using the Remote Control
Inserting the Batteries
...................................................................................................................... .......................................................................................................... ................................................................................................................ 1 2 2 3 3 3 4 4 4 5 5 5 5
Connecting
.............................................................................................................................. 6
Connecting Transmitter [WL-T1000]
Connecting DVD Player built decoder in
Conecting 2.1ch
Connecting 5.1ch sound card
Conecting 5.1ch amplifier
.......................................................................... ................................................................................... ......................................................................................................................... .................................................................................................... .......................................................................................................... 7~8 7 7 8 8
Connecting Receiver [WL-R1000]
Connecting surround speaker
Connecting another amplifier
.................................................................................................... .................................................................................................... 9 9 9
Basic operation
.................................................................................................................... 10~12
POWER ON
STAND BY ON
Selecting INPUT
Adjusting VOLUME
Selecting AUTO channel
Selecting MANU channel
Light on and off for POWER LAMP
.............................................................................................................................. .......................................................................................................................... ........................................................................................................................ ................................................................................................................... ........................................................................................................... .......................................................................................................... ........................................................................................... 10 10 11 11 12 12 12
Specifications .................................................................................................................... 13
1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 9 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet. Consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been moisture, does not operate normally, or has been dropped. 15 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS APPATATUS TO RAIN OR MOISTURE. THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED
"DANGEROUS VOLTAGE" WITHIN THE PRODUCTS ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PERSENCE OF INPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. For Pluggable Equipment, the socket outlet shall be installed near the equipment and shall be easily accessible
FCC Compliance Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment. Important Note: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from alpersons and must not be co-located or operating in conjunction with any other antenna or transmitter. European Union Notice This system has been tested for conformance with CE radio spectral, EMC and safety requirements.
AFHSS (Adaptive Frequency Hopping Spread Spectrum) When there is an error or interference during sending data on a channel, which is changed to another channel immediately then this is very strong method to microwave or wireless LAN.
FEC (Forward Error Correction) When there is an error or interference during sending data, this system change data immediately so that people do not notice any mistake during correction.
Functional control Every function operates at transmitter by remote control.
Short Delay Time (11.2m / sec) Short delay time can be useful for Home Theater System.
Auto Sleep Power off automatically if there is no signal during a certain period (AUTO OFF)
AUTO ID Pairing As soon as powering up both of transmitter and receiver, IDs of transmitter and receiver are made up automatically not to have any interference from adjacent same equipment.
Auto/Manual selector During manual function, when there is an interference operating given one of three of fixed channels, one channel of two channels is fixed manually.
Low input/High input Low input: connecting for analog output of DVD player or audio output High input: connecting for speaker output of DVD receiver
WL-T1000
(Transmitter) 1EA WL-R1000
(Receiver) 1EA Remote control DC 9V adapter Batteries
(WL-T1000)
(WL-T1000)
(1.5V "AAA") Manual 1EA 1EA 1EA 2EA
Front Panel AUTO LED This set is to Auto channel set-up.
SLEEP LED If there is no signal input over 3 minute or no power on player connecting to Transmitter, sleep mode is operating then SLEEP LED turns up. STAND BY /
VOLUME / REMOTE CENSOR INPUT SELECT
Back Panel
Front Panel
VOLUME / I O
Back Panel
R LINE OUT L RESET L SPEAKER OUTPUT R SPEAKER FILTER
Set speaker filter ' I ' for connecting 4 ohm speaker Set speaker filter ' Il ' for connecting 8 ohm speaker
Function of remote STAND BY L /ON INPUT L /OFF MANUAL CH. AUTO
VOLUME STAND BY L /ON INPUT L /OFF MANUAL CH. AUTO
VOLUME STAND BY: Stand by on / off INPUT: input select L/OFF: Antenna lamp off L/ON: Antenna lamp on AUTO: Auto channel set up MANUAL / CH.: Fixed channel set up VOLUME: Adjusting volume
Using the Remote Control
Inserting the Batteries Open the battery cover Insert the batteries
(AAA size) Close the cover. 30 30 5m Remote control works up to 7m
(23ft) within 30 degree angle. Point at remote censor to press your desired functions.
NOTE
The distance of Tx and Rx for best performance is 4m to 6m.
The position of Tx and Rx for best performance is the same height and the same line.
No hindrance between Tx and Rx makes you the best performance.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Keep away from microwave and LAN to avoid audio drop out.
Connecting DVD Player built decoder in. 1. Connect DC 9V adapter to DC input jack on the back of WL-T1000. 2. Plug in DC 9V adapter connecting WL-T1000. 3. Connect LOW-INPUT to surround out jack of DVD player.
OUT-PUT S/R CEN. F/R S/L WOO. F/L
1. Connect DC 9V adapter to DC input jack on the back of WL-T1000. 2. Plug in DC 9V adapter connecting WL-T1000. 3. Connect LOW-INPUT to audio out jack of DVD player.
AUDIO OUT L R
NOTE
Refer to the instruction manual of each component to be connected.
1. Connect DC 9V adapter to DC input jack on the back of WL-T1000. 2. Plug in DC 9V adapter connecting WL-T1000. 3. Connect LOW-INPUT to rear jack of computer
1. Connect DC 9V adapter to DC input jack on the back of WL-T1000. 2. Plug in DC 9V adapter connecting WL-T1000. 3. Connect HIGH-INPUT to speaker output jack (or surround jack) of 5.1ch or DVD Reciver.
FRONT OUT L / R REAR OUT L / R SUB WOOFER CENTER OUT 5.1ch Amp or DVD Reciver
SPEAKER OUT PUT FRONT LEFT FRONT RIGHT CENTER SUB WOOFER SURROUND LEFT SURROUND RIGHT NOTE
Refer to the instruction manual of each component to be connected.
1. Plug in the power cord of receiver [WL-T1000]
2. Connect surround speaker to receiver 3. Select speaker impedance using speaker filter switch. ( 'I' or 'II' ) 4. Set up power switch on right side of receiver 'I'.
I O I : ON O : OFF Surround Left Speaker Surround Right Speaker I O
R LINE OUT L RESET L SPEAKER OUTPUT R SPEAKER FILTER
I O
SPEAKER FILTER Surround Left Speaker Surround Right Speaker
L SPEAKER OUTPUT R R AUDIO IN L NOTE
Refer to the instruction manual of each component to be connected.
POWER ON Back panel of Transmitter (WL-T1000) Right side of Receiver (WL-R1000)
I O
1. Connect DC 9V adapter to DC input jack on the back of WL-T1000 2. Switch on WL-T1000. 3. Plug in WL-R1000. 4. Switch on WL-R1000
Power Blue LAMP of WL-T1000 and WL-R1000 flicker, which means STAND-BY. (AUTO ID Pairing) NOTE
Do not use the power switch on WL-T1000 and WL-R1000 if possible.
When plugging off and then on one of WL-T1000 and WL-R1000 or switch off then, you should plug off and then on one of the other.
STAND BY ON 1. Press STAND BY button.
Light on BLUE power LAMP.
Light on AUTO LED, LOW LED and LINK LED. 2. Operate DVD player or DVD receiver connecting WL-T1000. STAND BY L / ON INPUT L / OFF MANUAL CH. AUTO
VOLUME NOTE
The distance of Tx and Rx for best performance is 4m to 6m.
If LINK LED does not light on, make WL-T1000 and WL-R1000 power off and then on.
Selecting INPUT 1. select input using INPUT button.
Light up HIGH INPUT LED when selecting HIGH INPUT
Light up LOW INPUT LED when selecting LOW INPUT STAND BY L /ON INPUT L /OFF MANUAL CH. AUTO NOTE
connect HIGH INPUT to speaker output.
HIGH INPUT is set up to initial set up.
Adjusting VOLUME
Using DVD player or CD player 1. Adjust volume level using volume UP/DOWN button.
Using DVD receiver or 5.1ch amplifier 1.Adjust volume level of DVD receiver or 5.1ch amplifier. 2. Press test tone of DVD receiver or 5.1ch amplifier. 3. Adjust volume level of WL-1000 to match the other channels from test tone. STAND BY L /ON INPUT L /OFF MANUAL CH. AUTO
VOLUME NOTE
Use test tone of DVD player if your 5.1ch amplifier does not have any decoder.
You cannot adjust volume of level of LINE OUT.
Selecting AUTO channel 1. Press AUTO button of your remote control. NOTE
AUTO channel is set up to initial set up.
Selecting MANUAL channel STAND BY L /ON INPUT L /OFF MANUAL CH. AUTO
STAND BY L /ON INPUT L /OFF MANUAL CH. AUTO 1. Press MANUAL button then AUTO LED is light off. 2. Press CH button
the channel shall be changed whenever pressing CH button (CH1 CH2 CH3) 3. Select one channel which the best one of 3 channels. NOTE
Use MANUAL function only when there are too much interference.
AUTO channel is set up to initial set up.
Light on and off for POWER LAMP
Lighting ON continuously 1. Press L/ON button on the remote control.
Lighting OFF continuously STAND BY L / ON INPUT L / OFF MANUAL CH. AUTO 2. Press L/OFF button on the remote control
Whenever pressing button of remote or WL-1000, LAMP is light on for approximately 10sec. NOTE
Light off LAMP if possible as audio drop out is affected by LED.
L/OFF is set up to initial set up.
Transmitter [WL-T1000]
Receiver [WL-R1000]