all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manual | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 136.11 KiB | November 08 2010 | |||
1 |
|
Internal Photo | Internal Photos | 728.49 KiB | November 08 2010 | |||
1 |
|
External Photo | External Photos | 203.84 KiB | November 08 2010 | |||
1 |
|
label | ID Label/Location Info | 66.90 KiB | November 08 2010 | |||
1 |
|
label Location | ID Label/Location Info | 118.60 KiB | November 08 2010 | |||
1 |
|
Authorization letter | Cover Letter(s) | 50.33 KiB | November 08 2010 | |||
1 |
|
Operational Description | Operational Description | 25.32 KiB | November 08 2010 | |||
1 |
|
RF Setup Photo | Test Setup Photos | 197.12 KiB | November 08 2010 | |||
1 |
|
Test Report | Test Report | 3.67 MiB | November 08 2010 | |||
1 |
|
block diagram | Block Diagram | 102.86 KiB | November 08 2010 | |||
1 |
|
schematic | Schematics | 67.07 KiB | November 08 2010 |
1 | User Manual | Users Manual | 136.11 KiB | November 08 2010 |
Wireless Optical Mouse User Manual Feature 1 2.4G frequencydigital cordless with distance up to 5-7meters 2 Internal 65000 group ID codeplug and play 3 800/1200/1600DPI, high-precision and high- stabilization 4 Self contained power switch, low power consumptionautomatic sleeping function. Compatible IBM PC and compatiblesWin98SE/Me/2000/XP/VISTA operating systemno need driver Installation 1 Take the receiver from the packingplug onto the USB port of PC or BOTEBOOKafter a few minutesthe software of receiver will be installed automatically. If it is Win98SE system you need to follow the prompting frame to finish the installation. 2 Open the battery coverput into 2 AAA batteryPay attention to the battery polarity 3 Turn on the switch of the mousewheel light will flicker a few seconds 4 You can use it till you can find the curser on the PC screen Reset Wireless mouses remitter and receiver has storage the same group ID codeIt will make sure the mouse remit and receive the corresponding data. If any of ID code for each group disappear or disaffinity, the mouse will not workand you need to reset it. 1 Insert the receiver on the USB port, the indicator light will flickerthen put battery into mouseturn on the mouse. 2 When the indicator light flickerspress the right key of emitterthen press the middle key for three seconds, emitter will emit corresponding codethen the connection finished. 3 Move the mouse and you will find the curser on the PC screen. NoteDont always press the ID switchunless the ID code will be reset and you need to reconnect the mouse. CPI 800/1200/1600CPI can shift be adjusted, the DPI will change if you press the switching on the TOP of the mouse. Tips 1. The work distance is about 5-7 meters, but it will be less if there is any barrier. 2. This mouse uses laser light as transfer checking, it comply with correlative safe 3. standards, please do not look into the bottom of the mouse directly. It has automatic sleeping function, the mouse will sleep if you dont use it for about 10 minutes, just press any key to rouse it. 4. Take off the battery if you dont use the mouse for a long time. 5. Change the battery in time please. 6. Automatic ID code memory functionjust reconnect it if the ID code reset. 7. You can store the receiver in the emitters abdomen storage compartment if you dont use it. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
1 | label | ID Label/Location Info | 66.90 KiB | November 08 2010 |
2.4G Optical Mouse FCC ID: TUV2329A Rating: 3.0V=20MA Tested to comply with FCC standards FOR HOME OR OFFICE USE Fe MADE IN CHINA
1 | label Location | ID Label/Location Info | 118.60 KiB | November 08 2010 |
FCC Certification Label Location Sample Label location
1 | Authorization letter | Cover Letter(s) | 50.33 KiB | November 08 2010 |
2010-08-09 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Eastern Times Technology Co., Ltd. hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s):
Product description: 2.4G Wireless Optical Mouse Model name: DS-2329 We affirm that between SIEMIC and Eastern Times Technology Co., Ltd., any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Lu Hang/ General Manager
1 | Operational Description | Operational Description | 25.32 KiB | November 08 2010 |
Applicant: Eastern Times Technology Co., Ltd. FCC ID: TUV2329A Operation Description The transmitter use a SOC (system on a chip) chip MA3201, most of function can be finished by one chip, such as key-press detective, and it is the part of RF operating circuit. The transmitter is made of U1 (MA2301), SENSOR U3 PAW3204, U2 is ID code storage IC, U5, U6 is power management IC. U5 is the circuit of boost pressure, it make the batterys voltage reach 3V to support the mouse working. Clock oscillator is made of U1 internal circuit and X1, X2 surrounding circuit, and it can supply the power for clock pulse. Once start the SWRSWLSWMSWZ switchU1 will be process. U3 is optical chip, it can react the movement of tabletop then deliver to U1, U1 will finish all the data code internal and modulate, then enlarged by internal circuit, at last it delivered to the air by antenna. U2 is ID code memory, after the mouse and receiver code connect together successfully, U2 will record this code and backup it for next time. Antenna is formed by a copper trace on the PCB. Common grounding on PCB is not connected to real external ground. Power supply is DC 3V by two AAA batteries.
1 | RF Setup Photo | Test Setup Photos | 197.12 KiB | November 08 2010 |
Radiated emissions test < 1GHz Radiated emissions test > 1GHz
1 | Test Report | Test Report | 3.67 MiB | November 08 2010 |
Page 1 of 46 FCC CERTIFICATION On Behalf of Eastern Times Technology Co., Ltd. 2.4G Wireless Optical Mouse Model No.: DS-2329 FCC ID: TUV2329A Prepared for Address Prepared by Address
:
:
Eastern Times Technology Co., Ltd. Building 5, Penghua Industry Park, Heping Rd.(W), Longhua, Shenzhen, Guangdong, China
: ACCURATE TECHNOLOGY CO. LTD
:
F1, Bldg. A, Changyuan New Material Port, Keyuan Rd. Science & Industry Park, Nanshan, Shenzhen, Guangdong P.R. China Tel: (0755) 26503290 Fax: (0755) 26503396 Report Number Date of Test Date of Report
: ATE20101687
: August 5-6, 2010
: August 9, 2010 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 2 of 46 TABLE OF CONTENTS Description Page 1.1. 1.2. 1.3. 4.1. 4.2. 4.3. 4.4. 4.5. 4.6. Test Report Certification 1. GENERAL INFORMATION ..........................................................................................................2 Description of Device (EUT)....................................................................................................................2 Description of Test Facility ......................................................................................................................2 Measurement Uncertainty.........................................................................................................................2 2. MEASURING DEVICE AND TEST EQUIPMENT.....................................................................2 SUMMARY OF TEST RESULTS...................................................................................................2 3. FUNDAMENTAL AND HARMONICS RADIATED EMISSION FOR SECTION 15.249(A) 2 4. Block Diagram of Test Setup....................................................................................................................2 The Emission Limit ..................................................................................................................................2 Configuration of EUT on Measurement ...................................................................................................2 Operating Condition of EUT ....................................................................................................................2 Test Procedure ..........................................................................................................................................2 The Field Strength of Radiation Emission Measurement Results ............................................................2 SPURIOUS RADIATED EMISSION FOR SECTION 15.249(D) ...............................................2 Block Diagram of Test Setup....................................................................................................................2 The Emission Limit For Section 15.249(d) ..............................................................................................2 EUT Configuration on Measurement .......................................................................................................2 Operating Condition of EUT ....................................................................................................................2 Test Procedure ..........................................................................................................................................2 The Emission Measurement Result ..........................................................................................................2 BAND EDGES...................................................................................................................................2 The Requirement ......................................................................................................................................2 EUT Configuration on Measurement .......................................................................................................2 Operating Condition of EUT ....................................................................................................................2 Test Procedure ..........................................................................................................................................2 The Measurement Result ..........................................................................................................................2 ANTENNA REQUIREMENT..........................................................................................................2 The Requirement ......................................................................................................................................2 Antenna Construction ...............................................................................................................................2 5.1. 5.2. 5.3. 5.4. 5.5. 5.6. 6.1. 6.2. 6.3. 6.4. 6.5. 7.1. 7.2. 6. 7. 5. APPENDIX I ( TEST CURVES) (22 pages) FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 3 of 46 Test Report Certification Applicant : Eastern Times Technology Co., Ltd. Manufacturer : Eastern Times Technology Co., Ltd. EUT Description : 2.4G Wireless Optical Mouse
(A) MODEL NO.: DS-2329
(B) SERIAL NO.: N/A
(C) POWER SUPPLY: 3V DC (AAA batteries 2) Measurement Procedure Used:
FCC Rules and Regulations Part 15 Subpart C Section 15.249 ANSI C63.4: 2003 The device described above is tested by ACCURATE TECHNOLOGY CO. LTD to determine the maximum emission levels emanating from the device. The maximum emission levels are compared to the FCC Part 15 Subpart C Section15.249 limits. The measurement results are contained in this test report and ACCURATE TECHNOLOGY CO. LTD is assumed full responsibility for the accuracy and completeness of these measurements. Also, this report shows that the Equipment Under Test (EUT) is to be technically compliant with the FCC requirements. This report applies to above tested sample only. This report shall not be reproduced in part without written approval of ACCURATE TECHNOLOGY CO. LTD. Date of Test :
Prepared by :
Approved & Authorized Signer :
August 5-6, 2010
(Engineer)
(Manager) FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 4 of 46 1. GENERAL INFORMATION 1.1.Description of Device (EUT) EUT
:
2.4G Wireless Optical Mouse Model Number
: DS-2329 Power Supply Operate Frequency
:
:
3V DC (AAA batteries 2) 2408-2474MHz Applicant Address Manufacturer Address Eastern Times Technology Co., Ltd.
:
: Building 5, Penghua Industry Park, Heping Rd.(W), Longhua, Shenzhen, Guangdong, China Eastern Times Technology Co., Ltd.
:
: Building 5, Penghua Industry Park, Heping Rd.(W), Longhua, Shenzhen, Guangdong, China Date of sample received : August 3, 2010 Date of Test
: August 5-6, 2010 1.2.Description of Test Facility EMC Lab
: Accredited by TUV Rheinland Shenzhen Listed by FCC The Registration Number is 752051 Listed by Industry Canada The Registration Number is 5077A-2 Accredited by China National Accreditation Committee for Laboratories The Certificate Registration Number is L3193
: ACCURATE TECHNOLOGY CO. LTD
:
F1, Bldg. A, Changyuan New Material Port, Keyuan Rd. Science & Industry Park, Nanshan, Shenzhen, Guangdong P.R. China Name of Firm Site Location FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 5 of 46 1.3.Measurement Uncertainty Conducted Emission Expanded Uncertainty =
2.23dB, k=2 Radiated emission expanded uncertainty
(9kHz-30MHz) Radiated emission expanded uncertainty
(30MHz-1000MHz) Radiated emission expanded uncertainty
(Above 1GHz)
=
=
=
3.08dB, k=2 4.42dB, k=2 4.06dB, k=2 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 6 of 46 2. MEASURING DEVICE AND TEST EQUIPMENT Table 1: List of Test and Measurement Equipment Kind of equipment Manufacturer EMI Test Receiver Rohde&Schwarz ESCS30 EMI Test Receiver Rohde&Schwarz ESPI3 Spectrum Analyzer Agilent Pre-Amplifier Rohde&Schwarz CBLU118354 E7405A Type S/N 100307 101526/003 MY45115511 3791 Loop Antenna Bilog Antenna Horn Antenna Horn Antenna LISN LISN 1516131 9163-323 0-01 FMZB1516 VULB9163 BBHA9120D 9120D-655 BBHA9170 Schwarzbeck Schwarzbeck Schwarzbeck Schwarzbeck Rohde&Schwarz ESH3-Z5 Schwarzbeck NSLK8126 9170-359 100305 8126431 Calibrated until Jan. 9, 2011 Jan. 9, 2011 Jan. 9, 2011 Jan. 9, 2011 Jan. 9, 2011 Jan. 9, 2011 Jan. 9, 2011 Jan. 9, 2011 Jan. 9, 2011 Jan. 9, 2011 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 7 of 46 3. SUMMARY OF TEST RESULTS FCC Rules Section 15.207 Section 15.249(a) Section 15.249(d) Section 15.249(d) Section 15.203 Description of Test Conducted Emission Fundamental and Harmonics Radiated Emission Spurious Radiated Emission Band Edge Antenna Requirement Result N/A Compliant Compliant Compliant Compliant Remark: N/A means Not applicable. FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 8 of 46 4. FUNDAMENTAL AND HARMONICS RADIATED EMISSION FOR SECTION 15.249(A) 4.1.Block Diagram of Test Setup 4.1.1.Block diagram of connection between the EUT and simulators EUT
(EUT: 2.4G Wireless Optical Mouse) 4.1.2.Semi-Anechoic Chamber Test Setup Diagram ANTENNA ELEVATION VARIES FROM 1 TO 4 METERS 3 METERS Cable EUT 0.8 METER GROUND PLANE
(EUT: 2.4G Wireless Optical Mouse) FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 9 of 46 4.2.The Emission Limit 4.2.1.For intentional radiators, According to section 15.249(a), Operation within the frequency band of 2.4 to 2.4835GHz, The fundamental field strength shall not exceed 94 dBV/m and the harmonics shall not exceed 54 dBV/m. Fundamental Frequency 902-928MHz Field Strength of Fundamental
(microvolts/meter)
(millivolts/meter) Field Strength of harmonics 2400-2483.5MHz 5725-5875MHz 24.0-24.25GHz 50 50 50 250 500 500 500 2500 4.2.2.According to section 15.249(e), as shown in section 15.35(b), the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. 4.3.Configuration of EUT on Measurement The following equipment are installed on Radiated Emission Measurement to meet the commission requirements and operating regulations in a manner which tends to maximize its emission characteristics in normal application. 4.3.1. 2.4G Wireless Optical Mouse (EUT) Model Number Serial Number Manufacturer
: DS-2329
: N/A
: Eastern Times Technology Co., Ltd. 4.4.Operating Condition of EUT 4.4.1.Setup the EUT and simulator as shown as Section 4.1. 4.4.2.Turn on the power of all equipment. 4.4.3. Let the EUT work in TX modes measure it. The transmit frequency are 2408-2474MHz. We are select 2408MHz, 2440MHz, 2474MHz TX frequency to transmit. FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 10 of 46 4.5.Test Procedure The EUT and its simulators are placed on a turntable, which is 0.8 meter high above ground. The turntable can rotate 360 degrees to determine the position of the maximum emission level. EUT is set 3.0 meters away from the receiving antenna, which is mounted on an antenna tower. The antenna can be moved up and down between 1.0 meter and 4 meters to find out the maximum emission level. Broadband antenna (calibrated bilog antenna) is used as receiving antenna. Both horizontal and vertical polarizations of the antenna are set on measurement. In order to find the maximum emission levels, all of the interface cables must be manipulated according to ANSI C63.4: 2003 on radiated emission measurement. The EUT was tested in 3 orthogonal planes. The bandwidth of test receiver is set at 1MHz. FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 11 of 46 4.6.The Field Strength of Radiation Emission Measurement Results PASS. Date of Test: August 5-6, 2010 EUT:
Model No.: DS-2329 Test Mode: TX 2408MHz 2.4G Wireless Optical Mouse Temperature: 25oC Humidity:
50%
Power Supply: 3V DC (AAA batteries 2) Test Engineer: Joe Fundamental Radiated Emissions Frequency
(MHz) 2408.248 2408.248 Reading(dBV/m) PEAK 93.66 98.69 AV 88.02 93.02 Factor(dB) Corr.
-7.44
-7.44 Harmonics Radiated Emissions Frequency
(MHz) 4816.495 4816.495 Reading(dBV/m) PEAK 50.17 52.81 AV 44.53 47.24 Factor(dB) Corr.
-0.23
-0.23 Result(dBV/m) Limit(dBV/m) PEAK 114 114 PEAK 86.22 91.25 AV 80.58 85.58 AV 94 94 Result(dBV/m) Limit(dBV/m) PEAK 74 74 PEAK 49.94 52.58 AV 44.30 47.01 AV 54 54 Polarization Margin(dB) AV
-13.42
-8.42 PEAK
-27.78 Vertical
-22.75 Horizontal Polarization Margin(dB) AV
-9.70
-6.99 PEAK
-24.06 Vertical
-21.42 Horizontal Note:
1. Emissions attenuated more than 20 dB below the permissible value are not reported. 2. The field strength is calculated by adding the antenna factor, high pass filter loss(if used) and cable loss, and subtracting the amplifier gain(if any)from the measured reading. The basic equation calculation is as follows:
Result = Reading + Corrected Factor Where Corrected Factor = Antenna Factor + Cable Loss + High Pass Filter Loss Amplifier Gain 3. The spectral diagrams in appendix I display the measurement of peak values. FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 12 of 46 Date of Test: August 5-6, 2010 EUT:
Model No.: DS-2329 Test Mode: TX 2440MHz 2.4G Wireless Optical Mouse Temperature: 25oC Humidity:
50%
Power Supply: 3V DC (AAA batteries 2) Test Engineer: Joe Fundamental Radiated Emissions Frequency
(MHz) 2440.249 2440.249 Reading(dBV/m
) AV 87.46 92.60 PEAK 93.23 98.23 Factor(dB) Corr.
-7.36
-7.36 Result(dBV/m) Limit(dBV/m) Margin(dB) Polarization AV 80.10 85.24 PEAK 85.87 90.87 AV 94 94 PEAK 114 114 AV
-13.90
-8.76 PEAK
-28.13 Vertical
-23.13 Horizontal Harmonics Radiated Emissions Frequency
(MHz) 4880.500 4880.500 Reading(dBV/m
) AV 44.59 47.84 PEAK 50.24 53.47 Factor(dB) Corr. 0.13 0.13 Result(dBV/m) Limit(dBV/m) Margin(dB) Polarization AV 44.72 47.97 PEAK 50.37 53.60 AV 54 54 PEAK 74 74 AV
-9.28
-6.03 PEAK
-23.63 Vertical
-20.4 Horizontal Note:
1. Emissions attenuated more than 20 dB below the permissible value are not reported. 2. The field strength is calculated by adding the antenna factor, high pass filter loss(if used) and cable loss, and subtracting the amplifier gain(if any)from the measured reading. The basic equation calculation is as follows:
Result = Reading + Corrected Factor Where Corrected Factor = Antenna Factor + Cable Loss + High Pass Filter Loss Amplifier Gain 3. The spectral diagrams in appendix I display the measurement of peak values. FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 13 of 46 Date of Test: August 5-6, 2010 EUT:
Model No.: DS-2329 Test Mode: TX 2474MHz 2.4G Wireless Optical Mouse Temperature: 25oC Humidity:
50%
Power Supply: 3V DC (AAA batteries 2) Test Engineer: Joe Fundamental Radiated Emissions Frequency
(MHz) 2474.256 2474.256 Reading(dBV/m
) AV 87.37 92.38 PEAK 92.97 98.00 Factor(dB) Corr.
-7.37
-7.37 Result(dBV/m) Limit(dBV/m) Margin(dB) Polarization AV 80.00 85.01 PEAK 85.60 90.63 AV 94 94 PEAK 114 114 AV
-14.00
-8.99 PEAK
-28.40 Vertical
-23.37 Horizontal Harmonics Radiated Emissions Frequency
(MHz) 4948.510 4948.510 Reading(dBV/m
) AV 45.03 47.53 PEAK 50.67 53.14 Factor(dB) Corr. 0.47 0.47 Result(dBV/m) Limit(dBV/m) Margin(dB) Polarization AV 45.50 48.00 PEAK 51.14 53.61 AV 54 54 PEAK 74 74 AV
-8.5
-6.00 PEAK
-22.86 Vertical
-20.39 Horizontal Note:
1. Emissions attenuated more than 20 dB below the permissible value are not reported. 2. The field strength is calculated by adding the antenna factor, high pass filter loss(if used) and cable loss, and subtracting the amplifier gain(if any)from the measured reading. The basic equation calculation is as follows:
Result = Reading + Corrected Factor Where Corrected Factor = Antenna Factor + Cable Loss + High Pass Filter Loss Amplifier Gain 3. The spectral diagrams in appendix I display the measurement of peak values. FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 14 of 46 5. SPURIOUS RADIATED EMISSION FOR SECTION 15.249(D) 5.1.Block Diagram of Test Setup 5.1.1.Block diagram of connection between the EUT and simulators EUT
(EUT: 2.4G Wireless Optical Mouse) 5.1.2.Semi-Anechoic Chamber Test Setup Diagram ANTENNA ELEVATION VARIES FROM 1 TO 4 METERS 3 METERS Cable EUT 0.8 METER GROUND PLANE
(EUT: 2.4G Wireless Optical Mouse) FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 15 of 46 5.2.The Emission Limit For Section 15.249(d) 5.2.1.Emission radiated outside of the specified frequency bands, except for harmonics, shall be comply with the general radiated emission limits in Section 15.209. Radiation Emission Measurement Limits According to Section 15.209 Frequency
(MHz) 30 - 88 88 - 216 216 - 960 Above 960 Limit Field Strength of Quasi-peak Value
(microvolts/m) Field Strength of Quasi-peak Value
(dBV/m) 100 150 200 500 40 43.5 46 54 The final measurement in band 9-90kHz, 110-490kHz and above 1000MHz is performed with Average detector. Except those frequency bands mention above, the final measurement for frequencies below 1000MHz is performed with Quasi Peak detector. 5.3.EUT Configuration on Measurement The following equipment are installed on the emission Measurement to meet the commission requirements and operating regulations in a manner which tends to maximize its emission characteristics in normal application. 5.3.1. 2.4G Wireless Optical Mouse (EUT) Model Number Serial Number Manufacturer
: DS-2329
: N/A
: Eastern Times Technology Co., Ltd. 5.4.Operating Condition of EUT 5.4.1.Setup the EUT and simulator as shown as Section 5.1. 5.4.2.Turn on the power of all equipment. 5.4.3. Let the EUT work in TX modes measure it. The transmit frequency are 2408-2474MHz. We are select 2408MHz, 2440MHz, 2474MHz TX frequency to transmit. FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 16 of 46 5.5.Test Procedure The EUT and its simulators are placed on a turntable, which is 0.8 meter high above ground. The turntable can rotate 360 degrees to determine the position of the maximum emission level. EUT is set 3.0 meters away from the receiving antenna, which is mounted on an antenna tower. The antenna can be moved up and down between 1.0 meter and 4 meters to find out the maximum emission level. Broadband antenna (calibrated bilog antenna) is used as receiving antenna. Both horizontal and vertical polarizations of the antenna are set on measurement. In order to find the maximum emission levels, all of the interface cables must be manipulated according to ANSI C63.4: 2003 on radiated emission measurement. The EUT was tested in 3 orthogonal planes. The bandwidth of test receiver is set at 120kHz in 30-1000MHz. and set at 1MHz in above 1000MHz. The frequency range from 30MHz to 25000MHz is checked. The final measurement in band 9-90kHz, 110-490kHz and above 1000MHz is performed with Average detector. Except those frequency bands mention above, the final measurement for frequencies below 1000MHz is performed with Quasi Peak detector. FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 17 of 46 5.6.The Emission Measurement Result PASS. Date of Test: August 5-6, 2010 EUT:
Model No.: DS-2329 Test Mode: TX 2408MHz 2.4G Wireless Optical Mouse Temperature: 25oC Humidity:
50%
Power Supply: 3V DC (AAA batteries 2) Test Engineer: Joe Frequency
(MHz) Reading
(dBV/m) Factor(dB) Result Limit Corr.
(dBV/m)
(dBV/m)
-
-
QP
-
-
-
-
QP
-
-
QP
-
-
Margin
(dB) QP
-
-
Polarization Vertical Horizontal Note:
1. Emissions attenuated more than 20 dB below the permissible value are not reported. 2. The field strength is calculated by adding the antenna factor, high pass filter loss(if used) and cable loss, and subtracting the amplifier gain(if any)from the measured reading. The basic equation calculation is as follows:
Result = Reading + Corrected Factor Where Corrected Factor = Antenna Factor + Cable Loss + High Pass Filter Loss Amplifier Gain 3. The spectral diagrams in appendix I display the measurement of peak values. FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 18 of 46 Date of Test: August 5-6, 2010 EUT:
Model No.: DS-2329 Test Mode: TX 2440MHz 2.4G Wireless Optical Mouse Temperature: 25oC Humidity:
50%
Power Supply: 3V DC (AAA batteries 2) Test Engineer: Joe Frequency
(MHz) Reading
(dBV/m) Factor(dB) Result Limit Corr.
(dBV/m)
(dBV/m)
-
-
QP
-
-
-
-
QP
-
-
QP
-
-
Margin
(dB) QP
-
-
Polarization Vertical Horizontal Note:
1. Emissions attenuated more than 20 dB below the permissible value are not reported. 2. The field strength is calculated by adding the antenna factor, high pass filter loss(if used) and cable loss, and subtracting the amplifier gain(if any)from the measured reading. The basic equation calculation is as follows:
Result = Reading + Corrected Factor Where Corrected Factor = Antenna Factor + Cable Loss + High Pass Filter Loss Amplifier Gain 3. The spectral diagrams in appendix I display the measurement of peak values. FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 19 of 46 Date of Test: August 5-6, 2010 EUT:
Model No.: DS-2329 Test Mode: TX 2474MHz 2.4G Wireless Optical Mouse Temperature: 25oC Humidity:
50%
Power Supply: 3V DC (AAA batteries 2) Test Engineer: Joe Frequency
(MHz) Reading
(dBV/m) Factor(dB) Result Limit Corr.
(dBV/m)
(dBV/m)
-
-
QP
-
-
-
-
QP
-
-
QP
-
-
Margin
(dB) QP
-
-
Polarization Vertical Horizontal Note:
1. Emissions attenuated more than 20 dB below the permissible value are not reported. 2. The field strength is calculated by adding the antenna factor, high pass filter loss(if used) and cable loss, and subtracting the amplifier gain(if any)from the measured reading. The basic equation calculation is as follows:
Result = Reading + Corrected Factor Where Corrected Factor = Antenna Factor + Cable Loss + High Pass Filter Loss Amplifier Gain 3. The spectral diagrams in appendix I display the measurement of peak values. FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 20 of 46 6. BAND EDGES 6.1.The Requirement 6.1.1.Band Edge from 2400MHz to 2483.5MHz. Emission radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation. 6.2.EUT Configuration on Measurement The following equipment are installed on the emission Measurement to meet the commission requirements and operating regulations in a manner which tends to maximize its emission characteristics in normal application. 6.2.1. 2.4G Wireless Optical Mouse (EUT) Model Number Serial Number Manufacturer
: DS-2329
: N/A
: Eastern Times Technology Co., Ltd. 6.3.Operating Condition of EUT 6.3.1.Setup the EUT and simulator as shown as Section 4.1. 6.3.2.Turn on the power of all equipment. 6.3.3. Let the EUT work in TX modes measure it. The transmit frequency are 2408-2474MHz. We are select 2408MHz, 2474MHz TX frequency to transmit. 6.4.Test Procedure 1. The EUT is placed on a turntable, which is 0.8m above the ground plane and worked at 2. The turntable was rotated for 360 degrees to determine the position of maximum 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find 4. Set the spectrum analyzer in the following setting in order to capture the lower and highest radiated power. emission level. out the highest emission. upper band-edges of the emission:
RBW=1MHz, VBW=1MHz FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 21 of 46 6.5.The Measurement Result Pass. Date of Test: August 6, 2010 EUT:
Model No.: DS-2329 Test Mode: TX 2408MHz 2.4G Wireless Optical Mouse Temperature: 25oC Humidity:
50%
Power Supply: 3V DC (AAA batteries 2) Test Engineer: Joe Frequency
(MHz)
-
-
AV
-
-
Reading(dBV/m) PEAK Factor(dB) Corr. Result(dBV/m) Limit(dBV/m) PEAK PEAK
-
-
-
-
AV
-
-
-
-
AV
-
-
-
-
PEAK Margin(dB) AV
-
-
-
-
Polarization Vertical Horizontal Note:
1. Emissions attenuated more than 20 dB below the permissible value are not reported. 2. The field strength is calculated by adding the antenna factor, high pass filter loss(if used) and cable loss, and subtracting the amplifier gain(if any)from the measured reading. The basic equation calculation is as follows:
Result = Reading + Corrected Factor Where Corrected Factor = Antenna Factor + Cable Loss + High Pass Filter Loss Amplifier Gain 3. The spectral diagrams in appendix I display the measurement of peak values. FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 22 of 46 Date of Test: August 6, 2010 EUT:
Model No.: DS-2329 Test Mode: TX 2474MHz 2.4G Wireless Optical Mouse Temperature: 25oC Humidity:
50%
Power Supply: 3V DC (AAA batteries 2) Test Engineer: Joe Frequency
(MHz)
-
-
AV
-
-
Reading(dBV/m) PEAK Factor(dB) Corr. Result(dBV/m) Limit(dBV/m) PEAK PEAK
-
-
-
-
AV
-
-
-
-
AV
-
-
-
-
PEAK Margin(dB) AV
-
-
-
-
Polarization Vertical Horizontal Note:
1. Emissions attenuated more than 20 dB below the permissible value are not reported. 2. The field strength is calculated by adding the antenna factor, high pass filter loss(if used) and cable loss, and subtracting the amplifier gain(if any)from the measured reading. The basic equation calculation is as follows:
Result = Reading + Corrected Factor Where Corrected Factor = Antenna Factor + Cable Loss + High Pass Filter Loss Amplifier Gain 3. The spectral diagrams in appendix I display the measurement of peak values. FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 23 of 46 7. ANTENNA REQUIREMENT 7.1.The Requirement 7.1.1.According to Section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. 7.2.Antenna Construction The antenna is PCB Layout antenna, no consideration of replacement. Antenna FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 24 of 46 APPENDIX I
(Test Curves) FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 25 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 26 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 27 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 28 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 29 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 30 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 31 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 32 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 33 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 34 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 35 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 36 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 37 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 38 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 39 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 40 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 41 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 42 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 43 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 44 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 45 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687 Page 46 of 46 FCC ID: TUV2329A ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20101687
1 | block diagram | Block Diagram | 102.86 KiB | November 08 2010 |
TX 2408-2474MHZ EPROM U2 DS-2329 Block Diagram Key &Encoder B A C Optical sensor U3 PAW3204 DC-DC Steup 32.768KH
1 | schematic | Schematics | 67.07 KiB | November 08 2010 |
D C B A 2 BATT VBAT
+ BATT _ 2AA*2 1 CJP1 VCC D-
D+
GND USB-connector 1 2 3 4 CQ1 2SC8050 CR2 2K2 CC1 10uF CQ2 TL431 CR1 8K2 CR3 51K L2 100uH C25 220uF C26 104 D1 V3V IN5819 C28 C29 220uF 0.1uF 3 2 1 N V I S S V T U O V U5 BL8530 t e s e r N O S I M
/
TP1,TP2 : For Tuning NRZ Duty Cycle ANT1 NRF2402ANT TP1 TP2 C6 39nF 2 1 P 1 1 P D P I O D S
/
I S O M S C N K L C S V 3 V C21 104 8 4 7 4 6 4 5 4 4 4 3 4 2 4 1 4 0 4 9 3 8 3 7 3 6 3 5 3 4 3 3 3 C7 56P C8 27P R3 10K R4 R6 10K 5.1K C31
?
C16
?
L1 22uH 100P C10 L3 22nH 1.5N C30 C24 104 VBAT C11 1N C12 C13 1nF 104 C14 104 300P C1 2.7N C2 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 P A C _ V E S A B _ S S V T U O _ P OP_INP O PD_OUT RSSI RSSI_O_90_N RSSI_O_90 VOSN VOSP REG_BASE RF_IN REG_LNA VSS_AC1/_DC O C VSS_AC2 V ANT_PA1 _ G ANT_PA0 E R VSS_G_VCO
/
E d r N CP_OUT a U u G T _ _ O O C C V V T E S E R X P P V K L C Z R N T U O F
/
2 2 P 1 M W P 0 M W P
/
1 2 P
/
0 2 P
/
3 2 P K C 1 I P S O D 1 I P S I D 1 I P S
/
4 1 P
/
6 1 P
/
5 1 P Y D R 1 I P S
/
7 1 P 1 O 0 O t s e T F R t s e T F R
/
7 2 P
/
6 2 P U1 MA3201 I C G O L _ G E R
/
d r a u G _ D D V I C G O L _
/
d r a u G _ S S V 8 1 S S V S S V S S V B S U
/
t u O _ o d L
/
8 1 D D V D D V B S U D D V
/
I C S O X 8 1 D D V A O K L C X I K L C X 2 0 K 3 0 K 4 0 K 5 0 K I I 0 D D V O 1 D D V O P13/SPI0RDY P12/SPI0CK P11/SPI0DO P10/SPI0DI P07 P06 P05 P04 P03/YB P02/YA P01/XB P00/XA VBAT K01 K00 XOSCO
/
* SW1 Sensor power select 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 P07 P06 P05 P04 P03 P02 P01 P00 K01 K00 JR6 NC VBAT R7 1.2M R1 5.1K R2 1.8K C4 104 1 2 3 4 5 6 7 8 9 0 1 1 1 2 1 3 1 4 1 5 1 6 1 C3 240P 8 7 6 5 V3V SCLK P12 1 2 3 4 U2 A0 A1 A2 VSS 24C02 VCC WP SCL SDA 1 N N I 1 Z I 2 Z 2 0 K C9 104 C5 104 20P C19 X2 32.768KHz 20P C18 SW_Z ENCODER Z1IN R13 15K R14 15K Z2IN R9 4.7M D N G R12 X1 1M V 8 V 8
. 1 V 1 V V 3 V D N G C38
+
22uF C37 104
+
C44 100uF C41 104 12MHz C22 30P C23 30P 2 3 3 4 K00 SW_LBUT K01 SW_MBUT K02 SW_RBUT SW_TXID SW_CPI P11 LED1 LED R10 560R V3V P03 P01 P02
* P01 ~ P03 K00 ~ K02 Key scan R16 34.8K MOSI/SDIO SCLK 1 2 3 4 U3 OSC_RES VDDA MOTSWK VDD SDIO SCK VSS LED PAN3204DB 8 7 6 5 C43
+
1uF VCC C40 0.1uF
+ C45 10uF LED2 R15 12R VCC U6 VOUT VCC 3 VIN VSS V3V 2 1 BL8553-22PRM Title 2313 (MA3201+PAN3204) D C B A Date 2009/08/11 Drawn By 4 Revision Ver 1.5
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2010-08-11 | 2408 ~ 2474 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2010-08-11
|
||||
1 | Applicant's complete, legal business name |
Eastern Times Technology Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0014360739
|
||||
1 | Physical Address |
Building D, Nan An Industry Park Youganpu Village, Fenggang Town
|
||||
1 |
Building D, Nan An Industry Park
|
|||||
1 |
Dongguan City, Guangdong
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
TUV
|
||||
1 | Equipment Product Code |
2329A
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
H****** L********
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
00867********
|
||||
1 | Fax Number |
00867********
|
||||
1 |
l******@easterntimes.com.cn
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 2.4G Wireless Optical Mouse | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Accurate Technology Co., Ltd.
|
||||
1 | Name |
S**** L******
|
||||
1 | Telephone Number |
86-75********
|
||||
1 | Fax Number |
86-75********
|
||||
1 |
s******@atc-lab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2408.00000000 | 2474.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC