M808-KS STORM PRO Honeycomb WIRED & WIRELESS OPTICAL GAMING MOUSE
OPERATING INSTRUCTIONS
Dear user,
Thank you for choosing our REDRAGON product. To protect your rights and for better
customer service, we ask that you note our warranty rules.
1. Within 18 months of purchase date, repair is guaranteed for failure due to electrical
circuit problems. Man-made damages, such as disassembly, hard impacts,
submersion into water, plugging into improper current or voltage, and damage caused
by natural disasters such as fire, flood, or earthquake are not included.
2. Consumable parts (such as foot pad) and spare parts replacement are not included in
our warranty.
OS Support
Windows XP/ Vista/ Win 7/ Win 8/ Win 10
Button Description
1. Left mouse button.
2. Right mouse button.
3. Scroll wheel and middle button
4. Forward button
5. Backward button
6. DPI+ button (defaulted to speed up the cursor).
7. DPI- button (defaulted to slow down the cursor).
8. Polling rate switch button
9. Working Mode button (used to switch among the two working modes)
10. Power Switch: Power On with LED ON/ Power OFF / Power On without LED
Basic Operation:
How to Connect the Mouse with a Computer
Wired Connection
1. Take out the USB to USB C cable in the package and connect the mouse with your
2. Slide the power switch on the bottom of the mouse to Power On with LED ON or Power On
3. The computer will recognize and configure the mouse automatically.
4. The mouse will be ready for use when the configuration is finished. The LED on left and
right size will light on then if the power switch on the bottom of the mouse to Power On with
computer.
without LED.
LED ON.
5. The mouse is under recharging whatever the power switch is put to On with or without
LED ON. The scroll wheel will light up if the power switch is put to Power ON with LED ON.
And it does not light up if the power switch is put to Power On without LED .It may take
about four hours for the mouse to be fully recharged.
1. Take out the USB receiver in the package and plug it into any available USB port on your
2. Slide the power switch on the bottom of the mouse to Power On with LED ON or Power On
Wireless Connection
computer.
without LED.
3. The computer will recognize and configure the keyboard automatically.
4. The mouse will be ready for use when the configuration is finished. The LED of the LOGO
and the lower edge will light on then if the power switch on the bottom of the mouse to
Power On with LED ON
5. The mouse can work about 9 hours with LED backlight be OFF, and about 2 hours with
LED backlight be ON. The scroll wheel light will flash when battery is low
6. Recharge the keyboard when the battery is low.
How to Select DPI
The two buttons on the top of mouse are set to DPI+ / DPI – as default.
How to Switch the Working Mode
There are two working modes for the mouse. You can change the working mode with the
mode button on the bottom of the mouse. When you press the mode button, the scroll wheel
flashes in blueviolet four times slowly or quickly, and the polling rate of the mouse was set to
125Hz or 1000Hz correspondingly. The dpi value , backlight effects and button functions can
be set via software for each working mode.
How to Recharge the Battery
When the battery is low, please recharge the batter in time.
Take out the USB to USB C cable and connect the mouse and any USB power output
port. While the battery is under recharging, the scroll wheel lights up and flash firstly in red
(if the battery is very low), then in yellow and finally lights steadily on in yellow when the
battery is fully recharged. Meanwhile the side edge light lights up and expands from back
to front in red till the battery is fully recharged.
The battery can be recharged for more than 300 cycle times. And you can use the mouse
while it is under recharging.
Note: Slide the power switch on the bottom of the mouse to OFF for long term storage.
CAUTION: DO NOT CHARGE THE MOUSE BY WALL
PLUG ,INPUT VOLTAGE MAX 7V.
How to Reconnect the Mouse the with the USB Receiver
The mouse may lost connection with the USB receiver for some occasional reasons such as strong
magnet, violent vibration. So you may need to reconnect the mouse with the USB receiver. In this case,
unplug the receiver and plug it back again. Slide the power switch on the bottom of the mouse to ON,
press and hold the Left, Middle and Right button at the same time till the scroll wheel lights up and flash
in yellow. It will flash for about twenty seconds and then change back to the previous light effect . The
reconnection will be completed and you can use the mouse then.
Features:
Auto Sleep and Smart Shutdown
The mouse will sleep in eight minutes if there is no operation or when you shut down the
computer or unplug the USB receiver. You can wake it up by clicking any mouse button
except the DPI+ and DPI- buttons.
5 DPI level with indicator
Press DPI+ and DPI- button can be switch mouse DPI
level among
1000(Red)/2000(Blue)/4000(Green)/8000(Yellow)/16000(Orange) , defaulted as 1000DPI
Low Battery Indication
The scroll wheel light will flash in yellow when battery is low.
Backlight Effects (set via software)
LED Effects: Steady ON, Respiration, Streaming, OFF.
Storage for the Nano USB Receiver
The nano USB receiver can be stored in the storage slot on the bottom of the mouse.
Software Instructions
Please download the software on www.redragonzone.com for this mouse. You can get
more functions and settings after software installation.
The DPI value can be set from 100 to 16000DPI.
1.
2.
Continuous keystroke function: Set the number of clicks and delay time.
3. Backlight mode of the side edge: Steady ON/ Respiration/Streaming/OFF.
4. 10 of the mouse buttons can be remapped to various actions.
5.
Polling rate: 125Hz/250Hz/500Hz/1000Hz. As default, working mode 1 was set to
125Hz and working mode 2 was set to 1000Hz.
6.
7.
For each of the two working modes, the mouse buttons can be set independently.
Battery percentage indication: Battery percentage information is shown on the
main interface of software.
8.
FAQ
1.
If the mouse is not responding, please check whether the mouse is turned on or plugged
properly in the corresponding computer USB port, or try another USB port.
2.
If the cursor is moving slowly, jumping or intermittent, please try another surface. Surfaces
that are dark, dirty, not flat, or bright may affect the performance of the mouse. Use of a
mouse pad is recommended.
FCC Warning Statement
END! THE FORM IS AS SAME AS OTHER EDITED MANUAL, PLEASE COPY AND PASTE.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures: ‐‐Reorient or relocate the receiving antenna.
‐‐Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐‐Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation