3- Switching off the mouse To switch off the mouse, press the ID button underneath the mouse (c):
a flash will indicate that the mouse has been switched off. To switch the mouse on, press the ID button ((C) Recommendations 1. For best results keep the mouse at close proximity to the receiver.
?. To maximise the life of the batteries, it is recommended that the mouse be used on a white surface. Remove the batteries from the mouse during long periods of non usage. 3. To preserve the battery's life span, the mouse has an automatic stand-
by mode. To reinitiate press on any button. 4. To avoid loss of performance, it is advisable to not use the devise on a smooth surfaces such as glass and marble. 5. The light on the mouse (E) will start to flash if the batteries become flat, replace when needed. FCC Statement 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
? Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 1 To maximise the mouses effectiveness use a cable extension for Note Use of the wireless mouse may cause interference with radio/TV reception, it is advisable to rectify the interference with one of the follow suggestion:
* Re-position the radio /TV antenna
: Increase the distance between the mouse and the TV and radio equipment.
* Connect your computer to a different main from the TV/radio.
* Ask your supplier for advise. FR A RA AA A button on the receiver (D) for 10 seconds: the light on the receiver port will flash showing that ihe transmission has been successful. The mouse can now be used.