32 1 7 6 5 4 Charging the Tablet The Tablet comes with a built-in rechargeable lithium-polymer battery. It is recommended to fully charge the battery before first use. 8 Charge the Battery To Remove a Memory Card UNMOUNT the memory card. a. From the Home screen, tap the Menu key, and then tap Setting/Storage to go to the storage menu. b. Tap Unmount SD card to prepare the memory card for safe removal. Push the card further into the slot until you hear a click. The card will spring out of the slot. Grasp the card by its edge to remove it. Connect the power adapter to an electrical socket. Insert the DC jack end to the power slot on the Tablet. Disconnect the power adapter when the Tablet is fully charged. If the Tablet is powered off, it will charge until the battery is full. If the Tablet is powered on, the battery charge status will be indicated on the screen by the battery meter. When the Tablet is connected to a computer via the USB cable, the battery will charge via the USB socket, but at a much slower rate than via the DC 5V power adapter. Do not use any other power adapters than the one supplied. Using an incompatible power adapter could damage the Tablet and poses the potential risk of fire. Memory Expansion with Micro SDHC Memory Card Your tablet features a 16 GB built-in flash memory, which can be expanded using a Micro SD card (not included). You may use any Micro SD or Micro SDHC card, up to 32GB capacity. To use the memory card as media storage, transfer media files
(videos, music and photos) from your computer to your micro SD card in the usual way, and then insert it into the Tablet as described below. To insert and use a Micro SD card Align the memory card with the card slot. The metal contacts of the memory card should face up towards the LCD screen. Slide the card into the spring-loaded slot. Push the card in, until it clicks into place. Do not attempt to insert objects other than a micro SDHC memory card into the card slot. A compatible memory card should t easily into the card slot. If you encounter resistance, check the alignment of the card. Do not attempt to force the card in. 9 Button 1. Headphone jack 2. Micro USB 2.0 and Power slot 3.HDMI slot 4. Power key 5.Volume Key Description Audio output connection for headphones. Note: Speaker output is automatically disabled when headphones are connected to the Tablet. Connect to a computer to transfer data (e.g., music, videos, photos, and les). Also Connect to your power adaptor to charge the tablet. Connect your tablet to the TV. Press and hold to turn the Tablet on. Press to turn the screen on and off. Press and hold to access the Power off menu. Increase or decrease the volume Load external microSD memory 6. SD Card slot cards here. 7. Camera 8. Camera 9. Speaker Front-facing camera Rear-facing camera Speaker output is automatically muted when using headphone jack.