User Manual Version 1 Table of Contents
2 Contents Navigation -
Touch screen navigation -
Button navigation -
4 4 4 Wrist Placement and Charging-
6 Every-day wear -
During activity -
Charging -
Watch functions -
Changing watch face -
From the watch face -
From the watch settings-
6 6 8 10 10 10 10 DND (Do Not Disturb) mode -
10 Pairing -
Notifications -
Setting up notifications -
View notifications -
Clearing notifications -
Applications -
Status
12 16 16 18 18 20 20 2 Body Temperature -
Heart Rate Sleep Breath Weather Music Control Stop Watch and Timer Settings -
Watch Face Display Brightness System Activity Tracking Pause, resume and end activities Activity history 20 20 22 22 22 24 26 28 28 28 30 32 34 34 Care & maintenance -
36 Legal -
Copyright & trademarks Regulatory Information 38 38 40 Electronic Label Radio Fre-
quency (RF) Energy 40 Medical Precautions Medical Devices Battery Safety Operating Environment Specific Absorption Rate
(FCC & IC) Notices & Statements European Union Directives Conformance Statement RF parameters FCC Notice to Users Industry Canada Notice To Users 42 42 42 44 46 48 48 50 52 54 Navigation The Moto Watch 70 has a LCD touch screen and one side button on the right hand side of the watch. Touch Screen Navigation You can navigate the screen by swiping up, down, left and right. The watch will display the watch face by default. Swipe down from watch face to view battery level and ac-
cess quick setting screen Swipe up from watch face to notifications Swipe left and/or right to access various app widgets: steps/
distance/calories burnt, body temperature, heart rate, sleep data, weather, breathing exercise, music control, and menu. Button Navigation a. Long press the button (more than 3 seconds) when watch is off - turn on the watch b. Long press the button (more than 3 seconds) when watch is on - trigger turn off prompt screen for turning off the watch c. Short press the button when watch is on but screen is off - turn the screen back on d. Short press the button during an activity - trigger pause activity prompt screen for pausing the current activity 4 Wrist Placement and Charging Every-day wear Wear your watch with at least one fingers width below your wrist bone to ensure that the optical heart rate sensor can monitor correctly during daily wear. The back of the watch should maintain contact with your wrist and no light should escape the sensor. During activity Ensure the watch is at least two fingers width below your wrist bone. The watch should be slightly tighter than daily wear to prevent movement during activity but not too tight to reduce blood flow. 6 Charging To charge your Moto Watch 70:
Attach the USB end of the included charger into a com-
pute or charging brick Remove the watch and ensure the back of the watch is dry and clear of any debris Bring the POGO pin end of the charger near the metal pins on the back of the watch Magnets in the charger and watch will align the charger the correct way on the watch and begin charging. The watch will vibrate and show the current charge level while charging 0 7 Z S W O M A N I H C N I E D A M 70 IP 6 7 W A T E R R E S I S T A N T 8 DND (Do Not Disturb) mode DND mode will stop the watch from alerting when a new phone call or push notification is received. To enable DND mode:
1. Swipe down from the watch face to go to quick settings 2. Tap on the DND icon 3. The icon will turn white to indicate DND mode is enabled 4. Tap the DND icon again to turn off DND mode Watch functions Change the watch face 1. From the watch face You can change the watch face style by long pressing the touch screen while viewing the watch face. Once the watch vibrates and shows a zoomed out view of the watch face you can swipe left and right to change the style. Once a style is selected, tap the watch face to apply it. 2. From the watch settings You can change the watch face from the watch settings. From the watch face, swipe down to view the quick settings, tap on the settings icon. From settings select Dial, the watch should vibrate and show a zoomed out view of the watch face. Swipe left and right to change the style. Once a style is selected, tap the watch face to apply it. 10 Pairing your Watch to your mobile The Moto Watch 70 is expected to work with mobile phone APP (APP name: Moto Watch Lite) for best user experience and fully control your Moto Watch 70.Most of the operations are performed on the APP side and mobile phone side. To enable pair your watch to mobile phone:
1. Open the Moto Watch Lite APP on your mobile phone (either Android or iOS). 2. The APP can be searched and/or downloaded by scanning the QR code as shown. 3. Ensure the Bluetooth is enabled in your mobile phone. 4. In the Moto Watch Lite APP, click Add watch to add your watch. 5. Then select Moto Watch 70 as the correct watch model. 6. A list of nearby watches are shown in the APP, and the watch IDs should be in format Moto Watch 70-XXXX, the last four digits are the last four digits of the watchs MAC. 7. In the watch side, swipe down to view the Quick Setting, tap on the Setting icon, and then click About, you should be able to see the last four digits. 8. Select the right watch with the right ID and follow the process. 9. In the last step, Pairing success message will be shown. 12 Pairing your Watch to your mobile 14 Notifications Setting up notifications The Moto Watch 70 is able to receive, view and clear notifications and phone calls that come in through the connected mobile phone. To enable notifica-
tions on your watch:
Ensure Bluetooth is enabled on your connected phone. Open the Moto Watch Lite on your phone and tap on the profile icon in the top left Select the paired Moto Watch in the side menu under My Devices Select Phone Permissions from the device menu Enable the toggles for the notifications you want to receive on your Moto Watch. If you have not provided the Moto Watch permission to view and access your phone notifications you will be asked to do so now. 16 Notifications View notifications When the Moto Watch receives a notification from the connected mobile device the watch vibrates and automatically displays the notification content on the watch screen for 10 seconds. You can swipe from left to right, or short press the physical button or wait for the display to turn off to hide the notification and save it for later. You can view all notifications any time later (except during an activity) by swiping up from the watch face. Tapping on a notification will show the complete notification text and details. Swiping from left to right will go back to the notification list. Clearing notifications The Moto Watch can save up to 10 recent notifications. After this limit is exceeded, the oldest notification will be deleted every time a new one is received. You can manually clear a notification by tapping on it and swiping from left to right. Note: Clearing notifications on your watch will clear them on your mobile device as well. 18 Applications Status The status view provides a quick view of your wellness stats. The first page will show steps, calories and distance for the day. Body Temperature The Moto Watch 70 can measure a users body temperature periodical-
ly or on-demand. Swiping to body temperature widget will do a body Heart Rate The Moto Watch 70 will continually track heart rate throughout the day, during activities and while sleeping. Swiping to the heart rate widget will show a heart rate graph in the center, current heart rate at the top and the days high and low heart rates at the bottom. 20 Applications Sleep The Moto Watch 70 will automatically track sleep as long as you wear the watch while sleeping. Sleep tracking will only track sleep at the time set in Moto Watch Lite APP, the default sleep duration is between 00:00 (12am) and 08:00 (8am). Once you have woken up, the watch will calculate your sleep patterns and show your sleep stages on the sleep widget. This may take up to 1 hour to populate. Breath The Moto Watch 70 has a breathing exercise function on the breath widget. There are three modes of breathing exercise: Fast, Smooth and Slow. User can even select the exercise duration as 1 up 5 minutes (whole minute). Weather Weather for your current location is displayed on the weather widget. The Moto Watch must have a connection to a mobile device with internet access and the Moto Watch app must be granted location permission to receive weather on the watch. The weather widget will show the current forecast for the day 22 Applications Music control The Moto Watch 70 can also act as a remote control for music or media playing on the connected mobile phone. Once media is playing on the connected mobile device, the music widget will show the media controls for play/pause, previous and next. If the Moto Watch does not show active media from the connected mobile device ensure that bluetooth is enabled on the connected device and there is an active media notification on the connected mobile device. 24 Applications Additional functions: Stopwatch and timer There are stopwatch and timer functions in Moto Watch 70. In menu widget, click Function will show a sub-menu with Timer. Stopwatchand In stopwatch widget, you can simply click Play to start or resume the stop-
watch function, click Reset during pause to reset the stopwatch Pause to pause the stopwatch and click In timer widget, you can choose 1, 3, 5, 10, 15, 20, 30 or 60 minutes to count down by simply clicking the number icons; or you can click + icon to customize a timer with time you desired and then click the Play icon to start your timer. 26 Settings Watch Face The watch face settings offer the following options:
Five pre-built Motorola style watch faces. One user-custom watch face. Remark: User custom watch face only appears after user has uploaded his/her custom watch face through Moto Watch Lite APP. By swiping left or right, users can select among the watch faces, and then just tap once on the desired watch face for confirming the selection. Display Brightness The Display brightness settings offer 20%, 40%, 60%, 80% and 100% steps for users to set the brightness of the display. By simply tapping the + or - icon, users can change the brightness. 28 Settings System The system settings offer the following options:
Restart - this option will turn the Moto Watch off and then back on. Shutdown - this option will turn off the Moto Watch. To turn the Moto Watch back on, hold the top physical button until it vibrates and turns on or plug the watch in using the included adapter. Factory Reset - this option will reset the Moto Watch to factory settings. This is not reversible and will delete any data on the watch that was not uploaded to the Moto Watch app and will unpair the watch from the connected device. 30 Activity Tracking The Moto Watch 70 is capable of tracking various activities both indoor and outdoor. It uses advanced PPG and motion sensors to accurately track movement, physical excursion and more. To define, Moto Watch 70 offers 23 different activities for tracking. In the menu widget, choosing Activity and then choosing one of the twenty three activity modes offered will start a short timer for a 3 seconds count-down. After the 3 seconds count-down, the selected activity will start and be tracked. The watch is now tracking the activity. There is a stopwatch showing at top of the screen and there will be data to show for your activity. Taking Outdoor running as an example, Steps, Calories, Distance, Heart rate and Pace (min/km) are the data that will show to the user together with the stop-
watch time. The data is real-time. Data may not be shown in just a single screen, by tapping the Down or Up arrow icon can switch pages to view the data and stopwatch.
***Remark: there are two extra activities offered in Moto Watch Lite APP, which are Running (mobile) and Cycling (mobile). They have to be set in Moto Watch Lite APP on mobile. 32 Activity Tracking Pause, resume and end activities During an activity, pressing the physical button or swiping left on the screen can pause the activity. During activity pause, pressing the Play icon to resume the activity. From the activity pause, pressing the Stop icon to stop and end the activity. In case the activity is too short or data collected from activity is too little, the watch will prompt Insufficient data collected. Pressing Yes to stop and end the activity or No to resume and continue the activity. Upon finishing the activity, the data of the completed activity will show on the watch screen again for review. In data screen, swiping left on the data screen will return to activity menu, or pressing the physical button will return to menu widget. Activity history The Moto Watch 70 will synchronize the activity data stored on its regular sync with the Moto Watch Lite APP. Activity logs can be viewed in Health data tag of Moto Watch Lite APP if the data is sync to the APP.
***Remark: data will not be shown in APP if the watch is factory reset before data synchronization. 34 Care & maintenance Please clean the watch and strap periodically with cleanwater and then use a dry soft cloth to dry up the watch. Please DO NOT use shampoo, soaps and other chemicals to wipe the dirt in avoidance of irritating skin or corrosion of the watch. Please wipe your wrist and watch with a dry cloth or tissue after workout. Sweat may interfere and cause inaccuracy. Remove the watch when taking a hot shower or trip to the sauna, since too much steam can affect the seal and impact future water resistance. 36 Legal Copyright & trademarks Copyright & trademarks Motorola Mobility LLC 222 W. Merchandise Mart Plaza 16th Floor Chicago, IL 60654 USA www.motowatch.com Certain features, services and applications are network-dependent and may not be available in all areas; additional terms, conditions and/or charges may apply. Contact your service provider for de-
tails. All features, functionality and other product spec-
ifications, as well as the information contained in this guide, are based upon the latest available information and believed to be accurate at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice or obligation. Note: the images in this guide are examples only. 38 MOTOROLA and the Stylised M Logo are trademarks or reg-
istered trademarks of Motorola Trademark Holdings, LLC. Android, Google and other trademarks are owned by Google Inc. The Android robot is reproduced or modified from work created and shared by Google and used according to the terms described in the Creative Commons 3.0 Attribution Licence. All other product or service names are the property of their respective owners. 2015 Motorola Mobility LLC. All rights reserved. Caution: Motorola does not take responsibility for changes/
modification to the transceiver. Product ID: Moto Watch 70 Manual number:
Regulatory Information Electronic Label Your watch uses an electronic label that provides some regulatory information about the device. To see the electronic label, tap the watch screen, press the top physical button, go to Settings, About Radio Frequency (RF) Energy Exposure to RF Energy & Device Operation Your watch contains a transmitter and receiver of RF energy. It is designed to comply with regulatory requirements concerning human RF exposure. For optimal device performance, and to stay within the RF exposure guidelines, wear your watch as indi-
cated in your users guide. Follow Instructions to Avoid Interference Problems Turn off your watch in any location where posted notices instruct you to do so, such as hospitals or health care facilities. In an aircraft, turn off your watch whenever instructed to do so by airline staff. If your watch offers an airplane mode or similar feature, consult airline staff about using it in flight. 40 Medical Precautions Medical Devices Battery Safety If you use an implantable pacemaker or defibrilla-
tor, or another medical device, consult your health-
care provider and the device manufacturers direc-
tions before using this watch. Persons with a pacemaker or defibrillator should observe the following precautions:
ALWAYS keep the watch more than 20 centime-
ters (8 inches) from the pacemaker or defibrilla-
tor when the watch is turned ON. Turn OFF the watch immediately if you have any reason to suspect that interference is taking place. The battery is not intended for user replacement, do not replace the battery by yourself. Battery related operations must be performed by the man-
ufacturer or the manufacturers authorized service provider. Do not place the battery or the device under direct sunlight, close to open flames, heat, microwave ovens, ovens, etc. Avoid dropping or piercing the device or battery as such damage can cause battery leakage, overheat-
ing, igniting or exploding. If the battery leaks, prevent your skin or eyes from the leakage. If your skin or eyes have been exposed to the leakage, rinse immediately with clean water and go to the hospital for medical treatment. Please use the manufacturers approved charging accessories for charging. Using incompatible ac-
cessories may cause fire, explosion or scalding. 42 Keep the charger, charging cable and device in a dry environ-
ment while charging. Do not touch the charger or device with wet hands, and en-
sure that the charger is not exposed to rain or liquid. A wet environment can cause an electric shock or short circuit, which may lead to dangerous fire, explosion or scald Whenever the device becomes extremely hot, immediately remove the watch, turn off the power, and contact the manu-
facturers after-sales service personnel for assistance to pre-
vent scald or battery explosion. 44 Operating Environment The Maximum operating temperature of the device is between 0 C and 45 C, but it is recommended that the users suitable operation temperature is between 5 C and 35 C to ensure the best user experience. The device should be stored between -20 C and 45 C. If the storage temperature or operating temperature is beyond the range, the watch may be damaged and the battery life will be shortened. Do not use or store this device near flammable or expl-
sive equipment. A cautionary note on water resistance:
The Moto Watch 70 is 5ATM Water Resistant. This means you can safely submerge your water down to 50 meters, expose it to rain, splashes and other minor contact with water. The watch is not intended for high-impact water sports, diving, or extreme water pressure. Please note that components such as the touch screen may not func-
tion correctly when exposed to water, especially when in contact for prolonged periods of time. Likewise, leather bands should be kept dry at most times to prevent struc-
tural damage and deformation. Before charging, always ensure the watch is dry. If the watch has been in contact with saltwater or sweat, rinse it thoroughly and dry to avoid damage. Notices & Statements European Union Directives Conformance Statement The following CE compliance information is appli-
cable to eBuyNow procuts that carry one of the following CE marks:
Hereby, eBuynow declares that this product is in compliance with:
The essential requirements and other relevant provisions of Directive 1999/5/EC All other relevant EU Directives For products that support Wi-Fi 802.11a/ac (as de-
fined in your product information):
Outside the United States, this device is restricted to indoor use when operating in the 5.15 to 5.25 GHz (802.11a/ac Wi-Fi frequency band). The following gives an example of a typical Type name:
IMEI: 350034/40/394721/9 Type: MC2-41H14 Type Name You can view your products Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motoro-
la.com/rtte (in English only). To find your DoC, enter the Type the name from your products label in the Search bar on the website. 48 Notices & Statements RF parameters Operating range:
Bluetooth: 2402-2480MHz Maximum RF output power (e.i.r.p): 3dBm (typical) for BLE 50 Notices & Statements FCC Notice to Users The following statement applies to all products that bear the FCC log and/or FCC ID on the product label. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. See 47 CFR Sec. 15.105(b). These limits are designed to provide reasonable protec-
tion against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Howerever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. 52 Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. this device must accept any interference received, includ-
ing interference that may cause undesired operation. See 47 CFR Sec. 15.19(a)(3). Motorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the users authority to operate the equipment. See 47 CFR Sec. 15.21. FCC ID: 2AT76-MOSWZ70 Industry Canada Notice To Users This device complies with Industry Canada licence-ex-
empt RSS standard(s). Operation is subject to the fol-
lowing two conditions:
1. This device may not cause interference and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
1. lappareil ne doit pas produire de brouillage, et 2. lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est sus-
ceptible den compromettre le Fonctionnement. See RSS-Gen, Section 8.4. This device complies with ICES-003 requirements for Class B ITE (Information Technology Equipment). CAN ICES-003(B)/NMB-003(B). IC: 22297-MOSWZ70 Caution: Exposure to Radio Frequency Radiation. 1. To comply with the Canadian RF exposure compliance re-
quirements, this device and its antenna must not be co-lo-cated or operating in conjunction with any other antenna or transmitter. 2. During testing, MOSWZ70 are set to their highest trans-
mission levels and placed in positions that stimulate use against the head, with 10mm separation, and on the wrist, with no separation. When placing MOSWZ70 near your face, keep at least 10mm of separation to ensure exposure levels remain at or below the as-tested levels. 3. This equipment complies radiation exposure limits set forth for an uncontrolled environment. Attention: exposition au rayonnement radiofrquence. 1. Pour se conformer aux exigences de conformit RF cana-
dienne lexposition, cet appareil et son antenne ne doivent pas tre co-localiss ou fonctionnant en conjonction avec une autre antenne ou transmetteur. 2. Durant les tests, les radios de l MOSWZ70 sont rgles sur le niveau de transmission maximal et sont places dans des positions simulant une utilisation contre la tte, avec une sparation de 10 mm, et au poignet, sans sparation. Lorsque vous approchez votre MOSWZ70 du visage, gardez une sparation dau moins 10 mm pour veiller ce que les niveaux dexposition ne dpassent pas les niveaux tests. 3. Cet appareil est conforme aux limites dexposition aux rayonnements prescrites pour un environnement non control. 54 Canadian Notice ANATEL Telecommunication Equipment Approval:
This device contains licence-exempt transmitter(s)/re-
ceiver(s) that comply with Innovation, Science and Eco-
nomic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Avis Canadien Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada ap-
plicables aux appareils radio exempts de licence. Lex-
ploitation est autorise aux deux conditions suivantes :
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectri-
que subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 56 UK region importer: eBuyNow eCommerce LTD Contact address: 15-19 Bloomsbury Way, London WC1A 2TH, United Kingdom Operating frequency Range: 2400-2483.5MHz for BLE RF output power: 3 dBm (typical) (e.i.r.p.)