KODAK Smart Air Purifier AP550 DUAL FAN User Manual AP550_User Manual_V1.5A P.1 TABLE OF CONTENTS 1. IMPORTANT SAFETY INSTRUCTIONS 8. GRANT ACCESS 2. PRODUCT PARTS OVERVIEW 9. TROUBLESHOOTING 3. CONTROL PANEL 4. DISPLAY ICONS 10. SPECIFICATIONS 11. EXCLUSION FROM COVERAGE 5. OPERATION INSTRUCTIONS (AT AIR PURIFIER) 14 12. FCC, IC AND CE REGULATIONS 6. MOBILE APP DISPLAY ICONS 22 13. WARNING 4 10 11 12 7. OPERATION INSTRUCTIONS (ON MOBILE APP) 24 14. EC DECLARATION OF CONFORMITY P.2 50 58 59 60 62 64 66 P.3 1. IMPORTANT SAFETY INSTRUCTIONS WARNING:
Danger BEFORE USING KODAK SMART AIR PURIFIER, PLEASE READ THROUGH ALL THE INSTRUCTIONS AND CAU-
TIONARY MARKINGS IN THE MANUAL AND ON THE AIR PURIFIER. PLEASE KEEP IT FOR FUTURE REFER-
ENCE. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concern-
ing use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by chil-
dren without supervision. Do not let water or any other liquid or flammable de-
tergent enter the air purifier to avoid electric shock and/or a fire hazard. Do not clean the WHOLE air purifier with water, any other liquid, or a (flammable) detergent to avoid electric shock and/or a fire hazard. Do not spray any flammable materials such as insec-
ticides or fragrance around the air purifier. Warning Check if the voltage indicated on the air purifier corre-
sponds to the local power voltage before you connect the appliance. Do not use the air purifier if the plug, the power cord, or the appliance itself is damaged. Do not block the air inlet and outlet, e.g. by placing items on the air outlet or in front of the air inlet. Make sure that foreign objects do not fall into the air purifier through the air outlet. P.4 P.5 Caution This air purifier is not a substitute for proper ventila-
Avoid knocking against the air purifier (the air inlet and tion, regular vacuum cleaning, or use of an extractor hood or fan while cooking. outlet in particular) with hard objects. Always lift or move the air purifier by the handle on top If the power socket used to power the air purifier has of the machine. poor connections, the plug of the air purifier becomes hot. Make sure that you plug the air purifier into a properly connected power socket. Always place and use the air purifier on a dry, stable, level, and horizontal surface. Leave at least 30 cm free space behind and on both sides of the air purifier and leave at least 40 cm free space above the air purifier. Do not place anything on top of the air purifier. ing on the appliance may lead to potential injury. Make sure the reusable filter, front cover and back cov-
er are properly installed before you switch on the air purifier. Only use the original reusable filter specially intended for this KODAK Smart Air Purifier. Do not use any other filters or add any extra filters in the machine. Do not insert your fingers or objects into the air outlet or the air inlet to prevent physical injury or malfunc-
tioning of the air purifier. Do not use this air purifier when you have used indoor smoke-type insect repellents or in places with oily resi-
dues, burning incense, or chemical fumes. Do not use the air purifier near gas appliances, heating devices or fireplaces. Always unplug the air purifier after use and before Do not use the air purifier in a room with major tem-
perature changes, as this may cause condensation inside the air purifier. To prevent interference, place the air purifier at least 2 meters away from other electrical appliances that use airborne radio waves such as TVs, radios, and ra-
dio-controlled clocks. Do not sit or stand on the air purifier. Sitting or stand-
cleaning or carrying out other maintenance. P.6 P.7 The air purifier is only intended for household use un-
Suitable for dry location ONLY. Do not use outdoors or der normal operating conditions. on wet surfaces and do not expose to water or rain. If you need to move the air purifier, disconnect it from Do not handle any part of the plug or machine with the power supply first. wet hands. When moving the air purifier, do it slowly and do not push it rapidly. Do not move the air purifier by pulling its power cord. This KODAK Smart Air Purifier is not intended for use by persons (including children) with reduced physi-
cal, sensory or reasoning capabilities, or lack of expe-
rience and knowledge, unless they have been given supervision or instruction concerning use of the ma-
chine by a person responsible for their safety. Do not operate any machine with a damaged cord or plug. Discard the machine or return to an authorized service facility for examination and/or repair. If the supply cord is damaged it must be replaced by official channel, its service agent or similarly qualified person in order to avoid a hazard. If the machine is not working as it should, has received a sharp blow, has been dropped, damaged, left out-
doors, or dropped into water, do not use and contact the Customer Service. Ensure the machine is fully assembled in line with the Do not stretch the cord or place the cord under strain. instructions before use. Keep cord away from heated surfaces. Do not allow to be used as a toy. Close attention is necessary when used by or near children. Children should be supervised to ensure that they do not play with the machine. Use only as described in this KODAK Smart Air Purifier User Manual. Do not carry out any maintenance other than that shown in this manual, or advised by the Cus-
tomer Service of this air purifier. Do not run cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings. Do not route cord under furniture or any appliances. Arrange cord away from traffic area and where it will not be tripped over. Do not use any cleaning agents or lubricants on this machine. Unplug before cleaning or carrying out any maintenance. P.8 P.9 2. PRODUCT PARTS OVERVIEW 3. CONTROL PANEL Screen Button Power On/Off Reusable and Washable Filter Back Cover Front Cover P.10 P.11 4. DISPLAY ICONS PM2.5 Read-
ing Temperature Reading Mode Display Air Quality Rings Mode Display 29C 89%
Humidity Reading Capital letter A displays at Mode display indi-
cates the air purifier is in Auto mode.
No WiFi connection icon will display at Mode display indicates the air purifier cannot connect to WiFi (router) No Internet connection icon will display at Mode display indicates the air purifier cannot connect to the Internet 29C 89 29C 89%
29C 89%
P.12 29C 89%
29C 89%
29C 89%
29C 89%
Good 000-050 Moderate 051-100 Unhealthy 101-300 Hazardous 301-500 Device is not able to detect air quality correctly. Reset the device and if the problem per-
sists contact KODAK Customer Support. P.13 5. OPERATION INSTRUCTIONS
( AT AIR PURIFIER) Plug in the provided power adaptor on power socket, Press the power button once to turn ON the air Setup then plug in the DC plug into the DC jack located at bottom of the air purifier in order to power up. Power ON purifier. x1 Power OFF 3 sec P.14 P.15 Change fan speed and auto mode Sleep mode Press the LCD button to switch fan speed and auto mode. The change sequence is Fan Speed 1 -> Fan Speed 2 -> Fan Speed 3 -> Auto Mode -> Fan speed 1
-> (loop) For auto mode, the fan speed will change according to PM2.5 reading. If the PM2.5 reading is getting high-
er and higher, the fan speed will automatically and progressively increase. And if the PM2.5 reading get-
ting lower and lower in the meantime, the fan speed will then automatically and progressively decrease ac-
cording to the PM2.5 reading. Press the LCD button for 2 seconds, the air purifier will go to sleep mode. For sleep mode, the LCD display will turn off. And the fan speed will also change according to PM2.5 read-
ing, just like auto mode, but the power of the fans is relatively reduced to provide a quieter environment for sleep. 2 sec x1 Press the LCD button for 1 time to exit sleep mode if the air purifier is in sleep mode. P.16 P.17 Cleaning Pairing mode Press the LCD button and power button simultaneously for 2 seconds to enter pairing mode. 2sec KODAK Smart Home App Pairing Flow P.18 1. Select Air Purifier op-
tion to start pairing 2. Tap continue after holding 2 buttons and hearing a beep sound 3. (For IOS only) Tap the Go to Settings to access to the Wi-Fi settings P.19 4. (For IOS only) In the 5. Wait while pairing in Wi-Fi settings, connect to Purifier-VXXXXXXXXX and return to the app progress 6. You may choose one of the recommended names or costume 7. Tap Continue after costume your name 8. Waiting while the 9. Tap Done confirm the app is setting up the names setup P.20 P.21 6. MOBILE DISPLAY APP ICONS Move Left or Right to view the other air purifier Auto Mode Sleep Mode Timer Graph Quick Start Guide Move up or down to show weather information Air Quality Indication Power On/ Off Fans Speed Sleep Mode Schedule P.22 P.23 7. OPERATION INSTRUCTIONS
(ON MOBILE APP) Sign up or Login KODAK Air Purifier app To download the KODAK Smart Home app:
On your mobile device, visit the App Store (iOS) or Google Play (Android) Search for KODAK Smart Home app Download and install the KODAK Smart Home app on your mobile device scan to install P.24 P.25 Create or Login to Your Account If this is your first KODAK Smart Home product, you will be asked to create an account. To set up an account:
If you already have another KODAK Smart Home prod-
uct installed, simply select LOGIN:
On your mobile device, open the KODAK Smart Home app Tap SIGN UP Follow the in-app instructions to create a new account P.26 P.27 Pairing 1. Select Add New 2. Select Air Purifier 3. Tap Continue after Device option holding 2 buttons and hearing a beep sound 4. (For IOS only) Tap the Go to Settings to access to the Wi-Fi settings 5. (For IOS only) In the Wi-Fi set-
tings, connect to Purifier-VXXXXXXXXX and return to the app P.28 P.29 6. Wait while pairing in progress 7. You may choose one of the recommended names or costume 8. Tap Continue after costume your name 9. Tap Done confirm the setup P.30 P.31 Observe A Filter Usage 1. Tap to open the side 2. Tap Filter Usage 3. Filter Usage will be menu shown and when the bar is 100%, it means the device filter need to be cleaned P.32 P.33 Power On/Off 1. Tap to Power on 2. Tap to Power off P.34 P.35 Change Fans Speed 1. Tap to activate to fans speed 2. Indicates that the fans 3. Indicates that the 4. Indicates that the speed is low fans speed is middle fans speed is high P.36 P.37 Set Auto Mode Set Sleep Mode 1. Tap to activate the 2. Indicates that the auto mode auto mode is on 1. Tap to activate the 2. indicates that the sleep mode sleep mode is on P.38 P.39 Set a Sleep Mode Timer Delete a Sleep Mode Timer 1. Tap to activate the sleep timer 2. A timer will pop up, tap confirm when finished to adjust the time 1. Tap to show a sleep timer again 2. A timer will pop up, tap Delete to delete the timer P.40 P.41 Cleaning 1. will be shown when 2. Follow the cleaning 3. Cleaning Finished will guide to clean the device filter be shown when the user has followed all steps of cleaning guide the device filter need to be cleaned, just tap on the screen ,then a cleaning flow will be shown P.42 P.43 Graph 1. Tap to read the average PM2.5 data 2. Tap to read the average temperature data 3. Tap to read the average humidity data 4. Tap and to read the average hu-
midity and average temperature data P.44 P.45 Schedule 1. Toggle to activate the schedule 2. Press Starts or Ends to setup the duration 3. Press Confirm to acti-
4. Press Repeats to setup vate the duration the time pattern P.46 P.47 5. Press Confirm to setup the time pattern P.48 P.49 8. GRANT ACCESS 8.1 Add Friend You may grant access to your family and friends using the feature called Grant Access which is located on the side menu of the Dashboard. 1. Click on which is located on the Dashboard 2. Select Grant Access under Devices 3. Click on + which is located on the top right P.50 4. Simply follow the instructions on the app and click Save to add a friend P.51 9. TROUBLESHOOTING 10. SPECIFICATIONS No LCD display, no light indicator Check the power plug to see if it is properly plugged at your power socket. Check the DC connector to see if it is properly plugged in the air purifiers DC jack located under the air purifier. Check the reusable filter to see if it is properly in-
stalled in the air purifier. The reusable filter should be at same level as the front panel if it is properly installed as shown. Check the front cover to see if it is properly in-
stalled. The front cover should be all the way up and locked at the front of the air purifier, and the foam is located underneath the front cover as shown. Check the back cover to see if it is properly in-
stalled. The back cover should be all the way up and locked at the back of the air purifier, and the stopper should be well screwed underneath the back cover as shown. Power Adaptor CARD Suggested Room Area Dimensions Net Weight Frequency Band Operating Temperature Maximum RF Power Storage Temperature Input: 100-240v, 50/60Hz Output: DC 15V, 1.5A 180+cmf 450-550sq.ft 8.9 (W) x 6(D) x 15.5(H);
226mm(W) x 152mm (D) x 394mm
(H) 9.36LBS ; 4.3kg 2412-2472MHz for b, g, n20 (CE) 2422-2462MHz for n40 (CE) 2412-2462MHz for b, g, n20 (FCC&IC) 2422-2452MHz for n40 (FCC&IC) 0 to 40 deg.C EIRP 15dBm (CE) Conduct Power 18dBm (FCC & IC)
-10 to 70 deg.C
*The above specification are only for reference. With more advanced development and innovation, the specifications will be changed. P.52 P.53 Normal Wear and Tear: Regular maintenance, repair Use of Non-eBuyNow branded Products and 11. EXCLUSION FROM COVERAGE and replacement of parts and components due to normal wear and tear are not covered. Abuse & Misuse: Defects or damage due to:
(a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage
(such as cracks and scratches) to the surface of the product resulting from misuse;
(b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food;
(c) use of the Products or Accessories for commercial purposes or subjecting the Product or any Accessory to abnormal usage or conditions; or
(d) other acts which are not the fault of eBuyNow or its authorised distributor, are not covered. Accessories: Defects or damage due to the use of non-eBuyNow branded or certified Products or Accessories or other peripheral equipment are not covered. Unauthorised Service or Modification: Defects or damage due to service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than eBuyNow, or its authorised service centers, are not covered. Altered Products: Products or Accessories with
(a) serial numbers or date tags that have been removed, altered or obliterated;
(b) broken seals or that show evidence of tampering;
(c) mismatched board serial numbers; or
(d) nonconforming or eBuyNow branded housings, or parts, are not covered. Communication Services: Defects, damages, or the failure of Products or Accessories resulting from any communication service or signal you may subscribe to or use with the Products or Accessories are not covered. P.54 P.55 12. FCC, IC AND CE REGULATIONS KODAK AP550 / Kodak Air Purifier Duo /
Kodak Smart Air Purifier AP550 DUAL FAN 2AT76-AP550 22297-AP550 AP550 Trade Name:
Model:
FCC IC HVIN FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
P.56 Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,and
(2) this device must accept any interference received, including interference that may cause undesired operation. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3(B)/NMB-3(B) P.57 13. WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the users authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible. Industry Canada This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Radiation Exposure Statement Caution:
This Transmitter must be installed to provide a separation distance of at least 20cm from all persons. IC Radiation Dclaration dexposition Attention:
Cet metteur doit tre install pour fournir une distance de sparation dau moins 20cm de toute personne. P.58 P.59 We the manufacturer/ Importer: PerimeterSafe/eBuyNow declare under our sole responsibility that the following product Assessment of compliance of the product with the requirements relating to the essential requirements:
Radio Spectrum: EN300328 V2.1.1 14. EC DECLARATION OF CONFORMITY Type of equipment: Air Purifier Model: AP550 / Kodak Smart Air Purifier AP550 DUAL FAN / Kodak Air Purifier Duo Brand: KODAK complies with the essential protection requirements of RED Directive 2014/53/EU on the approximation of the laws of the Member States relating to Radio Spectrum Matters, the Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility (EMC) and the European Community Directive 2006/95/EC relating to Electrical Safety. Directive 2011/65/EC on the restriction of use of hazardous substances (RoHS). EMC: EN301489-1 V2.1.1 EN301489-17 V3.1.1 EN55014-1:2017 EN55014-2:2015 EN61000-3-2:2014 EN61000-3-3:2013 Electrical Safety: EN60335-1:2012/A11:2012 EN50335-21-65:2003/A13:2017 RF Safety: EN62311:2008 Ozone test: UL867, section 40 CSA C22.2 No.187 The product is labeled with the European Approval Marking CE as shown. Any unauthorized modification of the product voids this Declaration. P.60 P.61 The Kodak trademark, logo and trade dress are used under license from Kodak P.62 AP550_User Manual_V1.5A