WING RACER -
OPERATING INSTRUCTIONS Please read carefully before starting to operate. tis racammended to ogarale tha WING RACER under the adult supervision 1/10 SCALE FEATURES 7 Functions- runs fanvard, backward, lus lef and right, stag. Driver has realistic steering action when turning. BATTERY REQUIREMENT One "SV" battery for branemiller.
+ 4244" alkaline (1.5) or Ni-Cd (1.2) for WING RAGER. BATTERY INSTALLATION
(4) TRANSMITTER 4) Slide ON/OFF ta OFF, 2)Pr and pull ihe ballery campartrent cover in the direction of the arrow to remove it 3) Pullhe "BY" ballary in lhe compartment accerding to ihe polarity symbo's { and -) marked inside. 4) Aeplace tha ballary door.
(8) WING RAGER ide QNYOFF ta OFF. 3 Use a coin 19 twist the slot on the gattery compartment caver, then li open the cover. 3) Install the batteries in the compartment as indicaten by the | ONMOFF SWITCH polarity symbols [+ and -} marked ingida, 4) Close the battery door and slide the battery compartment 5 fabet de heck iL, HOWTO OPERATE:
1) Slide ON/OFF on the bottom of the WING FACER ta ON. 2) Slide ONSOFF on the transmitter to ON 3) Use the transmitter's levers ta contral the movernenl and direction of the WING RACER. Left Control Lever
= Push forward bo move lorwaro.
* Pull oackward to move back
* Ralaase lo stop. Right Control Lever
= Push leit ta turn lett.
= ta po straight. TRIM CONTROL SWITCH Trim switch is located on underside of WING RACER between front tires. tis used te align the wheels al your WING HAGER for consistant turning and drive. Mave switch left ar rignt until desire alignment is reached. TRIM CONTROL SWITCH CAUTION Avoid combined use of charged Ni-Cd batteries and disnharge Ni-Cd ballarias, Do not make old batteries with new batteries. Avaid using alkaling batteries and Ni-Cd batteries iagether. Remove batteries after you have finished using your WING RAGEH. pe ECHO TOYS LTD. ALL REGHTE RESERVED. ITEM is o1 PI o4A EETNG ROR ASAD TIA POLPEENOMERONE. PRINTED IN CHINA WED SITE: htipsiwenaechatoys.comnk