all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Regulatory | Users Manual | 1.03 MiB | / December 04 2015 | |||
1 |
|
Users Manual | Users Manual | 1.18 MiB | / December 04 2015 | |||
1 | Test Report | |||||||
1 | Cover Letter(s) | |||||||
1 | Parts List/Tune Up Info | |||||||
1 | External Photos | / December 04 2015 | ||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | / December 04 2015 | ||||||
1 | ID Label/Location Info | |||||||
1 | Parts List/Tune Up Info | |||||||
1 | Parts List/Tune Up Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos | / December 04 2015 | ||||||
1 | Cover Letter(s) |
1 | Regulatory | Users Manual | 1.03 MiB | / December 04 2015 |
i.roc Ci70 -Ex Compliance Statement 1. Declaration of EC-Conformity ........................................................................................4 2. Compliance Statement Overview ..................................................................................6 3. FCC Compliance Statement WLAN ...............................................................................6 4. CE Compliance Statement WLAN ................................................................................10 5. FCC Compliance Statement WWAN ............................................................................12 6. CE Compliance Statement WWAN ...............................................................................16 7. 8. FCC Compliance Statement Anatel .............................................................................18 FCC Compliance Statement HEAD MODULES ...........................................................20 9. CE Compliance Statement HEAD MODULES..............................................................22 2 3 1 EC-Declaration of Conformity Declarao de Conformidade CE EG-Konformittserklrung / EC-Declaration of Conformity Dclaration de conformit CE nach Richtlinie 94/9/EG und 1999/5/EG according to directive 94/9/EC and 1999/5/EC selon les directives 94/9/CE et 1999/5/CE Wir, ecom instruments GmbH, erklren in alleiniger Verantwortung, dass unser Produkt auf welches sich diese Erklrung bezieht, den nachfolgenden Daten, Richtlinien und Normen entspricht:
We, ecom instruments GmbH, declare under our sole responsibility, that the product to which this declaration relates, is in accordance with the provision of the following standards, directives and norms:
Nous, ecom instruments GmbH, dclarons sous notre seule responsabilit, que le produit pour lequel cette dclaration se rapporte, est conforme la disposition des normes et des directives suivantes:
Name & Anschrift des Herstellers innerhalb der europ-
ischen Gemeinschaft Name & address of the manufacturer in the EC Nom et adresse du fabricant dans lUnion Europenne ecom instruments GmbH Industriestrae 2 97959 Assamstadt Germany Beschreibung der Gerte Description of the devices Description des appareils Ex-Kennzeichnung Ex-designation Marquage Ex EG-Baumusterprfbescheinigung EC-Type Examination Certi cate Dclaration de conformit CE Zerti zierungsstelle Noti ed body Organisme noti Name & Anschrift der berwachenden Stelle a) Qualittssicherungssystem ISO 9001 Name & address of auditing body a) Quality Management System according to ISO 9001 Nom et adresse de lorganisme certi a) Systme dassurance qualit selon ISO 9001 Explosionsgeschtzer PDA Intrinsically safe PDA PDA protgs contre lexplosion Typ/Type: i.roc Ci70 -Ex II 2G Ex ia IIC T4 Gb IP64 II 2D Ex ia IIIC T135C Db IP6X PTB 12 ATEX 2030 Physikalisch-Technische Bundesanstalt Bundesallee 100 38116 Braunschweig Germany Kenn-Nummer / Identi cation number /
Numro didenti cation: 0102 DEKRA Certi cation GmbH Handwerkstrae 15 70565 Stuttgart Germany Name & Anschrift der berwachenden Stelle b) Qualittssicherungssystem der Produktion gem Richtlinie 94/9/EG (ATEX) Name & address of auditing body b) Quality Management System of production according to directive 94/9/EC (ATEX) Nom et adresse de lorganisme certi b) Systme dassurance qualit pour la fabrication selon la directive 94/9/CE (ATEX) Angewandte harmonisierte Standards Applied harmonized standards Standards harmoniss appliqus Physikalisch-Technische Bundesanstalt Bundesallee 100 38116 Braunschweig Germany Kenn-Nummer / Identi cation number /
Numro didenti cation: 0102 EN 60079-0: 2012 EN 60079-11: 2012 EN 62311: 2008 EN 62209-2: 2010 EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011 +AC2011 EN 60825-1: 2007 EN 301489-1:2009 EN 301489-3: 2005 EN 301489-7: 2005 EN 301489-17: 2009 EN 301489-24: 2010 EN 300328: 2006 EN 300330-2:2010 EN 301893: 2011 EN 302291-2: 2005 EN 301511: 2003 EN 301908: 2011 EN 302208-2:2011 Angewandte europische Richtlinien Applied European directives Directives gnrales europennes appliques 94/9/EG 1999/5/EG ecom instruments GmbH Assamstadt, 29. 07. 2014 Unterzeichnet / signed Jrg Hartleb Chief Operating Officer Tel.: +49 62 94 / 42 24-0 | Fax: +49 62 94 / 42 24-100 | E-Mail: sales@ecom-ex.com | www.ecom-ex.com ecom instruments GmbH | Industriestrae 2 | 97959 Assamstadt | Germany Tel.: +49 62 94 / 42 24-0 | Fax: +49 62 94 / 42 24-100 | E-Mail: sales@ecom-ex.com | www.ecom-ex.com ecom instruments GmbH | Industriestrae 2 | 97959 Assamstadt | Germany 1/2 2/2 4 5 0 A 1 0 E M 1 1 0 0 0 3 6 0 3 9 9 4 3 9 E D
:
. r N
-
. g e R
-
E E E W 5 2 Compliance Statement Dclaration de conformit The FCC and CE statements refer to the following equipment Model ID ID du modle CI70AN2XX00 CI70AQ2XX00 CI70AN2XXF3 CI70AQ2XXF3 TLB30 UNI13 LID TLB30F UNI-900F UNI-900E SE955-TLB30 SE955-TLB30F SE955-LID SE955-UNI13 Description i.roc Ci70 -Ex / WLAN Numeric Keypad i.roc Ci70 -Ex / WLAN QWERTY Keypad i.roc Ci70 -Ex / WWAN Numeric Keypad i.roc Ci70 -Ex / WWAN QWERTY Keypad 125/134 kHz LF RFID R/W Module Air Coil 13,56 MHz HF RFID R/W Module TROVAN LF-RFID R/W Module 125/134 kHz LF RFID R/W Module Ferrite 915 MHz UHF RFID R/W Module 868 MHz UHF RFID R/W Module Kombi Module 1D Barcode + LF-RFID R/W Module Air Coil Kombi Module 1D Barcode + LF-RFID R/W Module Ferrite Kombi Module 1D Barcode + Trovan LF-RFID R/W Module Kombi Module 1D Barcode + HF-RFID R/W Module FCC ID XAM300011GR01 XAM300011GR01 XAM300011GR02 XAM300011GR02 XAM300011GR03 XAM300011GR04 XAM300011GR05 XAM300011GR06 XAM300011GR07 XAM300011GR03 XAM300011GR06 XAM300011GR05 XAM300011GR04 3 FCC Compliance Statement WLAN Dclaration de conformit de la FCC WLAN for i.roc Ci70 -Ex / Model No. Ci70AN2XX00 / Ci70AQ2XX00 This Statement is part of the User Manual Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference Users of this product are cautioned to use accessories and peripherals approved by ecom instruments GmbH.The use of accessories other than those recommended, or changes to this product that are not approved by ecom instruments GmbH, may void the compliance of this product and may result in the loss of the users authority to operate the equipment. 6 Caution: For use with ecom AM Ci70 -Ex only. See batter y instructions. No user-
serviceable par ts. Charge only with the charging devices mentioned in section 4. Safety Regulations. Use of incorrect charger may present a risk of fire or explosion. Battery Recycling Information This product contains or uses a lithium-ion (Li-ion) main battery. When the batter y reaches the end of its useful life, the spent batter y should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this batter y with the solid waste stream. Contact your ecom instruments Ser vice Center for recycling or disposal information. FCC Digital Emissions Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to par t 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 802.11 Radio Precaution Statement Caution: Users are responsible for configuring the channels of operation that comply with their countr y regulator y standards. A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual. Caution: 802.11a wireless LAN 5.15 to 5.25 GHz (5 GHz radio channels 34 to 48) is restricted to indoor operations to reduce harmful interference to co-channel Mobile Satellite System (MSS) operations. 7 Radiation Exposure Statement Warning: This equipment complies with International Commission on Non-Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and European Committee for Electrotechnical Standardization (CENELEC) EN62311:2008 limits for exposure to radio frequency (RF) radiation. Specific Absorption Rate (SAR) : 0,471 W/kg If a body worn accessor y is not purchased from ecom instruments GmbH, the accessory must contain no metal. FCC 15.19 labeling requirements This device complies with par t 15 of the FCC Rules and Industr y Canada license-
exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC 15.21 Information to user Changes or modifications not expressly approved by the par ty responsible for compliance could void the users authority to operate the equipment. Industry Canada Statement Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference. Users of this product are cautioned to use accessories and peripherals approved by ecom instruments GmbH. The use of accassories other than those recommended, or changes to the product that is not approved by ecom instruments GmbH may void the compliance of this product and may result in the loss of the users authority to operate the equipment Mise en garde: Ce marquage indique que lusager doit, avant lutilisation, lire toute la documentation incluse. Conser vez ce supplment pour rfrence future. Les utilisateurs de ce produit sont aviss dutiliser des accessoires et des priphriques approuvs par ecom instruments GmbH. Lutilisation daccessoires autres que ceux recommands ou des changements ce produit qui ne sont pas approuvs par ecom instruments GmbH peuvent annuler la conformit de ce produit et mettre fin u droit qua lusager dutiliser lquipement. Canadian Digital Apparatus Compliance This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le present appareil est conforme aux CNR dIndustrie Canada applicaables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) Lappareil ne doit pas produire de brouillage, et (2) lutilisat de lappareil doit accepter tout brouillage radiolectrique sui, meme si le brouillage est susceptible den compromettre le fonctionnement. Canada Class A Statement This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations. Cet appareil numrique de la Classe A Respecte toutes les exigences du Rglement sur le matrial brouiller du Canada. Radiation Exposure Statement (SAR) Warning: This equipment complies with SAR for general population / uncontrolled exposure limits in SNAI / IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and CENELEC limits for exposure to radio frequency (RF) radiation. Specific Absorption Rate (SAR): 0.471 W/kg nonc sur lexposition aux radiations (SAR) Avertissement: Cet quipement est conforme aux limites dexposition au rayonnement frquence radiolectrique (RF) tablies par la Commission internationale de protection contre les rayonnements non ionisants (ICNIRP), le Federal Communications Commission Office of Engineering and Technology (OET), bulletin 65, la norme CNR-102 dIndustrie Canada et le rglement CENELEC. Dbit dabsorption spcifique (DAS): 0,471 W/kg 802.11 Radio Precaution Statement The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-
point operation as appropriate. Users should also be advised that high-power radars are allocated as primar y users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
Le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5250-
Le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5725-
5350 MHz et 5470-5725 MHz doit se conformer la limite de p.i.r.e.;
5825 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas. 8 9 De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. 4 CE Compliance Statement WLAN Dclaration de conformit de la CE WLAN 802.11 Radio Precaution Statement Caution: Users are responsible for configuring the channels of operation that comply with their country regulatory standards. A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual. Radiation Exposure Statement Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference Users of this product are cautioned to use accessories and peripherals approved by ecom instruments GmbH. The use of accessories other than those recommended, or changes to this product that are not approved by ecom instruments GmbH, may void the compliance of this product and may result in the loss of the users authority to operate the equipment. Caution: For use with ecom AM Ci70 -Ex only. See battery instructions. No user-
serviceable parts. Charge only with the charging devices mentioned in section 4. Safety Regulations. Use of incorrect charger may present a risk of fire or explosion. Battery Recycling Information This product contains or uses a lithium-ion (Li-ion) main battery. When the battery reaches the end of its useful life, the spent battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid waste stream. Contact your ecom instruments Service Center for recycling or disposal information. Warning: This equipment complies with International Commission on Non-Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and European Committee for Electrotechnical Standardization (CENELEC) limits for exposure to radio frequency (RF) radiation. If a body worn accessory is not purchased from ecom, the accessory must contain no metal. Laser Compliance and Precaution This product complies with the following standards for laser safety:
IEC 60825-1:2007/EN 60825-1:2008-05: Class 2 (1 mW, 630 670 nm) Caution: 802.11a wireless LAN 5150 to 5350 MHz (5,15 to 5,35 GHz) is limited to indoor use only. Note: Dynamic Frequency Selection and Transmit Power Control are required on the 5250 to 5350 MHz and 5470 to 5725 MHz frequency range. EU R&TTE Declaration ecom instruments GmbH declares that this device is in accordance with the essential requirements and other provisions of R&TTE Directive (1995/5/EC). 0700 This product is marked with this logo and uses radio frequency bands that are not harmonized throughout the European Union and other countries as noted in the table below. 10 11 This equipment may be operated in the following countries without restriction:
AT, BE, CY, CZ, DK, EE, FI, DE, GR, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, SK, SI, ES, SE, GB, IS, LI, CH, BG, RO, TR 802.11 b/g or Bluetooth Restrictions (Revision ERC/REC 70-03 E 2012-07, Annex3 Band A):
NO: This subsections does not apply for the geographical area within a radius of 20 km from the center for Ny-lesund. 5 FCC Compliance Statement WWAN Dclaration de conformit de la FCC WWAN for i.roc Ci70 -Ex / Model No. Ci70AN2XXF3 / Ci70AQ2XXF3 This Statement is part of the User Manual Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference Users of this product are cautioned to use accessories and peripherals approved by ecom instruments GmbH.The use of accessories other than those recommended, or changes to this product that are not approved by ecom instruments GmbH, may void the compliance of this product and may result in the loss of the users authority to operate the equipment. Caution: For use with ecom AM Ci70 -Ex only. See battery instructions. No user-
serviceable par ts. Charge only with the charging devices mentioned in section 4. Safety Regulations. Use of incorrect charger may present a risk of fire or explosion. Battery Recycling Information This product contains or uses a lithium-ion (Li-ion) main battery. When the battery reaches the end of its useful life, the spent battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid waste stream. Contact your ecom instruments Service Center for recycling or disposal information. FCC Digital Emissions Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 802.11 Radio Precaution Statement Caution: Users are responsible for configuring the channels of operation that comply with their country regulatory standards. A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual. Caution: 802.11a wireless LAN 5.15 to 5.25 GHz (5 GHz radio channels 34 to 48) is restricted to indoor operations to reduce harmful interference to co-channel Mobile Satellite System (MSS) operations Radiation Exposure Statement Warning: This equipment complies with International Commission on Non-Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and European Committee for Electrotechnical Standardization (CENELEC) EN62311:2008 limits for exposure to radio frequency (RF) radiation. Specific Absorption Rate (SAR) : 1,315 W/kg If a body worn accessory is not purchased from ecom instruments GmbH, the accessory must contain no metal. Use of accessories not authorized by ecom instruments GmbH may void the compliance of this product and may result in RF exposures beyond the limits established for this equipment. FCC 15.19 labeling requirements This device complies with par t 15 of the FCC Rules and Industry Canada license-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any 12 13 interference received, including interference that may cause undesired operation. Specific Absorption Rate (SAR): 1,315 W/kg FCC 15.21 Information to user Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Industry Canada Statement Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference. Users of this product are cautioned to use accessories and peripherals approved by ecom instruments GmbH. The use of accassories other than those recommended, or changes to the product that is not approved by ecom instruments GmbH may void the compliance of this product and may result in the loss of the users authority to operate the equipment Mise en garde: Ce marquage indique que lusager doit, avant lutilisation, lire toute la documentation incluse. Conser vez ce supplment pour rfrence future. Les utilisateurs de ce produit sont aviss dutiliser des accessoires et des priphriques approuvs par ecom instruments GmbH. Lutilisation daccessoires autres que ceux recommands ou des changements ce produit qui ne sont pas approuvs par ecom instruments GmbH peuvent annuler la conformit de ce produit et mettre fin u droit qua lusager dutiliser lquipement. Canadian Digital Apparatus Compliance This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le present appareil est conforme aux CNR dIndustrie Canada applicaables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) Lappareil ne doit pas produire de brouillage, et (2) lutilisat de lappareil doit accepter tout brouillage radiolectrique sui, meme si le brouillage est susceptible den compromettre le fonctionnement. Canada Class A Statement This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations Cet appareil numrique de la Classe A Respecte toutes les exigences du Rglement sur le matrial brouiller du Canada. Radiation Exposure Statement (SAR) Warning: This equipment complies with SAR for general population / uncontrolled exposure limits in SNAI / IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and CENELEC limits for exposure to radio frequency (RF) radiation. Use of accessories not authorized may void the compliance of this product and may result in RF exposures beyond the limits established for this equipment. nonc sur lexposition aux radiations (SAR) Avertissement: Cet quipement est conforme aux limites dexposition au rayonnement frquence radiolectrique (RF) tablies par la Commission internationale de protection contre les rayonnements non ionisants (ICNIRP), le Federal Communications Commission Office of Engineering and Technology (OET), bulletin 65, la norme CNR-102 dIndustrie Canada et le rglement CENELEC. Dbit dabsorption spcifique (DAS): 1,315 W/kg Lutilisation dantennes et daccessoires non autoriss peut annuler la conformit de cet appareil et peut causer une exposition aux RF au-del des limites tablies pour cet quipement. 802.11 Radio Precaution Statement The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-
point operation as appropriate. Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
Le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5250-
Le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5725-
5350 MHz et 5470-5725 MHz doit se conformer la limite de p.i.r.e.;
5825 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas. De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. 14 15 6 CE Compliance Statement WWAN Dclaration de conformit de la CE WWAN Radiation Exposure Statement Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference Users of this product are cautioned to use accessories and peripherals approved by ecom instruments GmbH. The use of accessories other than those recommended, or changes to this product that are not approved by ecom instruments GmbH, may void the compliance of this product and may result in the loss of the users authority to operate the equipment. Caution: For use with ecom AM Ci70 -Ex only. See battery instructions. No user-
serviceable parts. Charge only with the charging devices mentioned in section 4. Safety Regulations. Use of incorrect charger may present a risk of fire or explosion. Battery Recycling Information This product contains or uses a lithium-ion (Li-ion) main battery. When the battery reaches the end of its useful life, the spent battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid waste stream. Contact your ecom instruments Service Center for recycling or disposal information. 802.11 Radio Precaution Statement Caution: Users are responsible for configuring the channels of operation that comply with their country regulatory standards. A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual. Warning: This equipment complies with International Commission on Non-Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and European Committee for Electrotechnical Standardization (CENELEC) limits for exposure to radio frequency (RF) radiation. Use of accessories not authorized may void the compliance of this product and may result in RF exposures beyond the limits established for this equipment. Laser Compliance and Precaution This product complies with the following standards for laser safety:
IEC 60825-1:2007/EN 60825-1:2008-05: Class 2 (1 mW, 630 670 nm) Caution: 802.11a wireless LAN 5150 to 5350 MHz (5,15 to 5,35 GHz) is limited to indoor use only. Note: Dynamic Frequency Selection and Transmit Power Control are required on the 5250 to 5350 MHz and 5470 to 5725 MHz frequency range. EU R&TTE Declaration ecom instruments GmbH declares that this device is in accordance with the essential requirements and other provisions of R&TTE Directive (1995/5/EC). 0700 This product is marked with this logo and uses radio frequency bands that are not harmonized throughout the European Union and other countries as noted in the table below. This equipment may be operated in the following countries without restriction:
AT, BE, CY, CZ, DK, EE, FI, DE, GR, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, SK, SI, ES, SE, GB, IS, LI, CH, BG, RO, TR 802.11 b/g or Bluetooth Restrictions (Revision ERC/REC 70-03 E 2012-07, Annex3 Band A):
NO: This subsections does not apply for the geographical area within a radius of 20 km from the center for Ny-lesund. 16 17 7 Anatel Compliance Statement ANATEL Dclaration de conformit de la ANATEL for i.roc Ci70 -Ex / Model No. Ci70AN2XX00 / Ci70AQ2XX00 Para Usurios do Brasil (pt) Cuidado: A LAN sem fio 802.11a de 5,15 a 5,25 GHz (rdio de 5 GHz com canais 34 a 48) para uso restrito a operaes em ambientes fechados para reduzir a interferncia prejudicial a operaes de Sistema de Satlite Mvel (MSS) de co-canais. Informaes sobre Exposio s Ondas de Rdio e Taxa de Absoro Especfica (SAR) Cuidado: Esta identificao indica que o usurio deve ler toda a documentao fornecida antes de usar o produto. Guarde esse suplemento para referncias futuras. Os usurios deste produto devem usar acessrios e perifricos aprovados pela ecom instruments GmbH. Usar acessrios no recomendados, ou fazer alteraes neste produto no aprovadas pela ecom instruments GmbH, poder anular a conformidade deste produto e resultar na perda da permisso do usurio de utilizar o equipamento. Cuidado: Para uso com ecom AM Ci70 -Ex nica. Leia as instrues de bateria. No existem peas reparveis pelo utilizador. Recarregue a bateria somente com o carregador, conforme descrito na seo 4 Regulamentos de segurana. Usar um carregador incorreto pode representar um risco como o perigo de incndio e exploso. Infomaes de Reciclagem de Bateria Este produto contm ou usa uma bateria principal de on de ltio (Li-ion). Quando a bateria chega ao fim da sua vida til, deve ser descartada por um profissional de reciclagem qualificado ou por um especialista no manuseio de materiais perigosos. No misture a bateria com fluxo de lixo slido. Entre em contato com seu Centro de Servios de ecom instruments GmbH para informaes de reciclagem ou descarte. Declarao de precauo de rdio 802.11 Cuidado: Os usurios so responsveis pela configurao dos canais de funcionamento que atendem aos padres regulatrios dos seus pases. Um administrador de rede sem fio deve analisar as restries operacionais detalhadas no manual de instalao do ponto de acesso. Ateno: Este equipamento atende aos limites de exposio a radiao de radiofrequncia (RF) do International Commission on Non-Ionizing Radiation Protection
(ICNIRP), IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Boletim 65, Canada RSS-102 e European Committee for Electro-
technical Standardization (CENELEC). Se for usado um acessrio corporal que no tenha sido fornecido pela ecom instruments GmbH, observe que tal acessrio no pode conter metal. Declarao de exposio radiao Este produto atende s diretrizes de exposio RF quando utilizado com os acessrios ecom instruments GmbH fornecidos ou destinados a este produto. O uso de outros acessrios pode resultar em no conformidade com as diretrizes de exposio RF. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este produto est homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resoluo n 242 e atende aos requisitos tcnicos aplicados, incluindo os limites de exposio da Taxa de Absoro Especfica referente a campos eltricos, magnticos e eletromagnticos de radiofreqncia, de acordo com as Resolues n 303 e 533. Para maiores informaes, consulte o site da ANATEL. www.anatel.gov.br 18 19 8 FCC Compliance Statement Head Modules Dclaration de conformit de la FCC Modules de tte This Statement is part of the User Manual Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference Users of this product are cautioned to use accessories and peripherals approved by ecom instruments GmbH. The use of accessories other than those recommended, or changes to this product that are not approved by ecom instruments GmbH, may void the compliance of this product and may result in the loss of the users authority to operate the equipment. Laser Compliance and Precaution The SN-SE955 and Ex25i is registered with the CDRH as a Class II Laser Product (21 CRF Subchapter J, Part 1040). This product has a maximum output of 1 mW at 630 to 670 nm. Caution: There are no user serviceable parts inside the SE955 or Ex25i. Use of controls or adjustments, or performance of procedures other than those specified herein, may result in hazardous laser light exposure of up to mW at 630 to 670 nm. Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50,0 dated July 26, 2001. EN 60825-1:2007 IEC 60825-1:2007 Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Class 2 laser scanners use a low power, visible light diode. As with many very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. U.S.A. Digital Emissions Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC RF Exposure Statement To satisfy the FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20cm should be maintained between the antenna of this device and persons during operation. To ensure compliance, operations at closer distances than this are not recommended. FCC 15.19 labeling requirements This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC 15.21 Information to user Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Canadian Digital Apparatus Compliance This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le present appareil est conforme aux CNR dIndustrie Canada applicaables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) Lappareil ne doit pas produire de brouillage, et (2) lutilisat de lappareil doit accepter tout brouillage radiolectrique sui, meme si le brouillage est susceptible den compromettre le fonctionnement. IC RF Exposure Statement To satisfy the IC RF exposure requirements for mobile transmitting devices, a separation distance of 20cm should be maintained between the antenna of this device and persons during operation. To ensure compliance, operations at closer distances than this are not recommended. Exposition aux ondes radio Pour satisfaire aux exigences dexposition Rf IC pour les quipements mobiles transmettant des ondes radio, une distance de 20 cm devrait tre observe entre lantenne de ce dispositif et toute personne pendant lopration. Afin dassurer la conformit, il est recommand de ne pas oprer des distances infrieures. 20 21 CE RF Exposure Statement To comply with EU RF exposure requirements, this device must be operated in the hand with a minimum separation distance of 20 cm or more from a persons body. Other operating configurations should be avoided. Laser Compliance and Precaution This product complies with the following standards for laser safety:
IEC 60825-1:2007/EN 60825-1:2008-05: Class 2 (1 mW, 630 670 nm) EU R&TTE Declaration ecom instruments GmbH declares that this device is in accordance with the essential requirements and other provisions of R&TTE Directive (1995/5/EC). 0700 This product is marked with this logo and uses radio frequency bands that are not harmonized throughout the European Union and other countries as noted in the table below. This equipment may be operated in the following countries without restriction:
AT, BE, CY, CZ, DK, EE, FI, DE, GR, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, SK, SI, ES, SE, GB, IS, LI, CH, BG, RO, TR 9 CE Compliance Statement Head Modules Dclaration de conformit de la FCC Modules de tte Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference. Users of this product are cautioned to use accessories and peripherals approved by ecom instruments GmbH. The use of accessories other than those recommended, or changes to this product that are not approved by ecom instruments GmbH, may void the compliance of this product and may result in the loss of the users authority to operate the equipment. Caution: For use with ecom AM Ci70 -Ex only. See battery instructions. No user-
serviceable parts. Charge only with the charging devices mentioned in section 4. Safety Regulations. Use of incorrect charger may present a risk of fire or explosion. 802.11 Radio Precaution Statement Caution: Users are responsible for configuring the channels of operation that comply with their country regulatory standards. A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual. Radiation Exposure Statement Warning: This equipment complies with International Commission on Non-Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and European Committee for Electrotechnical Standardization (CENELEC) limits for exposure to radio frequency (RF) radiation. If a body worn accessory is not purchased from ecom instruments GmbH, the accessory must contain no metal. 22 23 Copyright 2014 ecom instruments GmbH Der Inhalt dieses Dokuments darf ohne vorherige schriftliche Genehmigung durch die ecom instruments GmbH in keiner Form, weder ganz noch teilweise vervielfltigt, weiter-
gegeben, verbreitet oder gespeichert werden. Der Inhalt dieses Dokuments wird so prsentiert, wie er aktuell vorliegt. Die ecom instruments GmbH bernimmt weder ausdrcklich noch stillschweigend irgend-
eine Gewhrleistung fr die Richtigkeit oder Vollstndigkeit des Inhalts dieses Do-
kuments, einschlielich, aber nicht beschrnkt auf die stillschweigende Ga-
rantie der Markttauglichkeit und der Eignung fr einen bestimmten Zweck, es sei denn, anwendbare Gesetze oder Rechtsprechungen schreiben zwingend eine Haf-
tung vor. Die ecom instruments GmbH behlt sich das Recht vor, jederzeit ohne vorherige Ankndigung nderungen an diesem Dokument vorzunehmen oder das Doku-
ment zurckzuziehen. Copyright 2014 ecom instruments GmbH The contents of this document, either in part or in their entirety, may not be reproduced, forwarded, distributed or saved in any way without ecom instruments GmbH prior written consent. The contents of this document are presented as they currently exist. ecom instruments GmbH does not provide any express or tacit guarantee for the correctness or complete-
ness of the contents of this document, including, but not restricted to, the tacit guaran-
tee of market suitability or fitness for a specific purpose unless applicable laws or court decisions make liability mandatory. ecom instruments GmbH reserves the right to make changes to this document or to withdraw it any time without prior notice. PA000549 / / 1.000 / 09-2014 WEEE-Reg.-Nr. DE 934 99306 300011AL33A03 nderungen vorbehalten. Subject to change. ecom instruments GmbH Industriestr. 2 97959 Assamstadt Germany Phone: + 49 6294 / 4224 0 Fax: + 49 6294 / 4224 100 E-Mail: sales@ecom-ex.com www.ecom-ex.com
1 | Users Manual | Users Manual | 1.18 MiB | / December 04 2015 |
Datum // date 10.07.2014 User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 User Manual Head Module Settings s g n i t t x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t l e S e u d o M d a e H
:
a u n a M r e s U l Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 1 / 25 User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 Datum // date 10.07.2014 Table of Contents:
1 Head Module Settings .................................................................................................................... 3 1.1 Introduction ................................................................................................................................ 3 1.2 Enable Module........................................................................................................................... 4 1.3 Enable Dual Head Module ........................................................................................................ 5 1.4 #L|F TLB30 (low frequency RFID reader) .............................................................................. 5 1.5 #H UNI13 (high frequency RFID reader) ................................................................................ 6 1.6 #Q ARE8 (RFID reader) ......................................................................................................... 7 1.7 #T LID (RFID reader) ............................................................................................................. 8 1.8 #U|E UNI900 (very high frequency RFID reader) .................................................................. 8 1.9 S# - SE955 (1D short range laser barcode scanner) ................................................................ 9 1.10 Wedge Data........................................................................................................................... 17 1.11 Good Read ............................................................................................................................ 18 1.12 Enable Service ...................................................................................................................... 18 1.13 Version Info ........................................................................................................................... 19 2 Trigger Button Settings ............................................................................................................... 20 2.1 Map the trigger event OEM Trigger on a button ................................................................... 20 2.2 Map a button on named events to catch the button by software ............................................ 21 3 OEM GRID ..................................................................................................................................... 25 3.1 OEM Scanner Grid .................................................................................................................. 25 s g n i t t Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 2 / 25 l e S e u d o M d a e H
:
a u n a M r e s U l x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 1 Head Module Settings 1.1 Introduction The Head Module Settings are there for controlling the head modules. They provide the following: enable or disable a head module (see 1.2 Enable Module), reading with a dual head module with two different trigger buttons (see 1.3 Enable Dual Head Module), set settings for each head module (see 1.4
#L|F TLB30 (low frequency RFID reader), 1.5 #H UNI13 (high frequency RFID reader), 1.6 #Q ARE8 (RFID reader), 1.7 #T LID (RFID reader), 1.8 #U|E UNI900 (very high frequency RFID reader) and 1.9 S# - SE955 (1D short range laser barcode scanner)), set a preamble/postamble for the output data (see 1.10 Wedge Data), enable or disable the beep that should be ringing out or not after a good read (see 1.11 Good Read), enable or disable the service of the head modules which runs on your device (see 1.12 Enable Service), display information of the service of the head modules which is installed on your device (see 1.13 Version Info). The Head Module Settings are located in the Intermec Settings. To open the Head Module Settings click on the windows icon on the main screen. Then click on Settings-> System->Intermec Settings (see Step1-3). Scroll down until Head Module Settings (see Step4) and click on it. The Head Module Settings are opened. After you have made any settings in the Head Module Settings you can start reading with your head module by pushing the center scan or the left side lower button on your device (see therefor also 1.3 Enable Dual Head Module). Step1 Step2 Step3 Step4 Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 3 / 25 s g n i t t l e S e u d o M d a e H
:
a u n a M r e s U l x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 1.2 Enable Module User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 There is a possibility in the Head Module Settings called Enable Module where you can enable or disable a head module. Open the Head Module Settings and choose Enable Module (see Pic1). In the next window (see Pic2) you can choose one of the USB devices (for example the LF reader) or one of the UART devices (for example the SE955 scanner). Click on the OK button to save your choice. A new feature is integrated from version 1.7. It is called Enable Logging (see Pic3). The head modules TLB30, ARE8, LID and SE955 provide the possibility to log the process from using one of these head modules. With the Enable Logging feature you can enable or disable this logging. Pic1: Head Module Settings Pic2: Enable Module x c o d
. s g n i t t Pic3: Enable Logging s g n i t t Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 4 / 25 l e S e u d o M d a e H
:
a u n a M r e s U l l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 1.3 Enable Dual Head Module User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 There is a new feature from version 1.7.2. It is now possible to read with a dual head module by pushing different trigger buttons. If you choose two head modules, a USB device (e.g. TLB30) and a UART device (e.g. SE955), you can start reading with the USB device by pushing the center scan button and with the left side lower button you can start reading with the UART device. In section 1.2 Enable Module is described how you can select a head module. It is not allowed to choose a USB device together with EA15 or EX25i. So if you choose a USB device and EA15 or EX25i, the USB device will be disabled and you can start reading with the EA15 or EX25i by pushing the center scan or the left side lower button. If you choose only one head module, you can start reading with this head module by pushing the center scan or the left side lower button. 1.4 #L|F TLB30 (low frequency RFID reader) After you have enabled the LF reader through selecting it in the Enable Module section in the Head Module Settings (see 1.2 Enable Module) you are now able to change some settings for the LF reader. Open the Head Module Settings and choose Setting #L|F TLB30 (see Pic4). In the next window (see Pic5) you can make any changes you want to do for the LF reader. Click on the OK button to save your changes. Pic4: Head Module Settings after enabling the LF reader Pic5: LF reader settings Explanation of the settings for the #L|F TLB30:
Setting COM Port from block data length Unique Titan HitagS Hitag-2 Zoodiac Q5 Tiris Description Serial port of the reader. Start block address to start reading a TAG. Length of data to read from a TAG. Enable or disable the reading of a Unique TAG. Enable or disable the reading of a Titan TAG.
(not implemented at the moment) Enable or disable the reading of a HitagS TAG. Enable or disable the reading of a Hitag-2 TAG.
(not implemented at the moment) Enable or disable the reading of a Zoodiac TAG. Enable or disable the reading of a Q5 TAG.
(not implemented at the moment) Enable or disable the reading of a Tiris TAG. Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 5 / 25 s g n i t t l e S e u d o M d a e H
:
a u n a M r e s U l x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 timeout for reading (in seconds) Timeout for reading a TAG (a value from 1 to 25 seconds is Output Data allowed). Format of the output data (HEX or ASCII). 1.5 #H UNI13 (high frequency RFID reader) To make some changes for the HF reader, enable the reader in the Enable Module section in the Head Module Settings. Then click on Setting #H UNI13 (see Pic6). In the next window (see Pic7) make your changes you want to do for the HF reader and save them by clicking the OK button. Pic6: Head Module Settings after enabling the HF reader Pic7: HF reader settings x c o d
. s g n i t t Explanation of the settings for the #H UNI13:
Setting COM Port set UID in front from block data length ISO 15693 ARIO 64bit ICODE UID ICODE 1 Mifare Pico-Tag Description Serial port of the reader. Enable or disable that the UID of a TAG should be put in front of the read data. Note: When this option is enabled and data length is set higher than 0 and reading of data from a TAG failed, the UID of the TAG will be output alone. Start block address to start reading a TAG. Length of data to read from a TAG. Enable or disable ISO 15693 transponders. Enable or disable ARIO 64bit system. Enable or disable ICODE UID system. Enable or disable ICODE 1 transponders. Enable or disable Mifare transponders. Enable or disable Pico-Tag transponders. timeout for reading (in seconds) Timeout for reading a TAG (a value from 1 to 25 seconds is allowed). Output Data Format of the output data (HEX or ASCII). change high byte with low byte Enable or disable the changing from high byte with low byte of the output data. Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 6 / 25 s g n i t t l e S e u d o M d a e H
:
a u n a M r e s U l l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 Note:
User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 Head modules with the labels NH-UNI13-AB and SH-SE955-UNI13-AB are able to read the UID and data from a Mifare NFC TAG. Head modules with the labels NH-UNI13-AA and SH-SE955-UNI13-AA are just able to read the UID of a Mifare TAG. For the head modules with an AA it is recommended to set the option data length to 0 and it is necessary to enable the set UID in front option in the head module settings. If you want to read a Mifare TAG with an NH-UNI13-AA or SH-SE955-UNI13-AA it is also recommended to enable only the Mifare transponder in the head module settings and to disable all other transponders. 1.6 #Q ARE8 (RFID reader) To make some changes for the ARE Trovan reader, enable the reader in the Enable Module section in the Head Module Settings. Then click on Setting #Q ARE8 (see Pic8). In the next window (see Pic9) make your changes you want to do for the ARE Trovan reader and save them by clicking the OK button. Pic8: Head Module Settings after enabling the ARE Trovan reader Pic9: ARE Trovan reader settings Explanation of the settings for the #Q ARE8:
Setting COM Port Description Serial port of the reader. timeout for reading (in seconds) Timeout for reading a TAG (a value from 1 to 25 seconds is allowed). Output Data Format of the output data (HEX or ASCII). Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 7 / 25 s g n i t t l e S e u d o M d a e H
:
a u n a M r e s U l x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 1.7 #T LID (RFID reader) User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 To make some changes for the LID Trovan reader, enable the reader in the Enable Module section in the Head Module Settings. Then click on Setting #T - LID (see Pic10). In the next window (see Pic11) make your changes you want to do for the LID Trovan reader and save them by clicking the OK button. Pic10: Head Module Settings after enabling the LID Trovan reader Pic11: LID Trovan reader settings x c o d
. s g n i t t Explanation of the settings for the #T LID:
Setting COM Port Description Serial port of the reader. timeout for reading (in seconds) Output Data Timeout for reading a TAG (a value from 1 to 25 seconds is allowed). Format of the output data (HEX or ASCII). 1.8 #U|E UNI900 (very high frequency RFID reader) To make some changes for the UHF reader, enable the reader in the Enable Module section in the Head Module Settings. Then click on Setting #U|E UNI900 (see Pic12). In the next window (see Pic13) make your changes you want to do for the UHF reader and save them by clicking the OK button. Pic12: Head Module Settings after enabling the UHF reader Pic13: UHF reader settings s g n i t t Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 8 / 25 l e S e u d o M d a e H
:
a u n a M r e s U l l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 User Manual Head Module Settings Explanation of the settings for the #U|E UNI900:
Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 Setting COM Port set EPC in front add CR after each EPC Description Serial port of the reader. Enable or disable that the EPC of a TAG should be put in front of the read data. If more than one TAG is identified and this option is enabled, a carriage return is inserted after each EPC of a TAG. from block data length Start block address to start reading a TAG. Length of data to read from a TAG. timeout for reading (in seconds) Timeout for reading a TAG (a value from 1 to 25 seconds is allowed). Output Data Format of the output data (HEX or ASCII). change high byte with low byte Enable or disable the changing from high byte with low byte of the Power adjustment Power adjustment of the reader. A setting from 6 to 27 dB is available. output data. Note:
If more than one TAG is identified, only the EPCs of the TAGs are output. In this case the option set EPC in front has to be enabled. If this option is disabled, a sound is ringing out if more than one TAG is identified and nothing will be output. In the case that more than one TAG is identified, no data is read from the TAGs so the options from block and data length have no effect in this situation. 1.9 S# - SE955 (1D short range laser barcode scanner) To make some changes for the SE955 scanner, enable the scanner in the Enable Module section in the Head Module Settings. Then click on Setting S# SE955 (see Pic14). In the next window (see Pic15) make your changes you want to do for the SE955 scanner and save them by clicking the OK button. Pic14: Head Module Settings after enabling the SE955 scanner Pic15: SE955 scanner settings s g n i t t Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 9 / 25 l e S e u d o M d a e H
:
a u n a M r e s U l x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 User Manual Head Module Settings Explanation of the settings for the S# - SE955:
Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 Description Serial port of the scanner. Timeout for scanning a barcode. Angle for scanning a barcode (allowed values are narrow or wide). Symbologies->UPC/EAN Setting COM Port Laser On Time Scan Angle UPC-A UPC-E UPC-E1 EAN-8 EAN-13 Bookland EAN Decode UPC/EAN Supplementals Enable or disable decoding of UPC-A barcodes. Enable or disable decoding of UPC-E barcodes. Enable or disable decoding of UPC-E1 barcodes. Enable or disable decoding of EAN-8 barcodes. Enable or disable decoding of EAN-13 barcodes. Enable or disable decoding of Bookland EAN barcodes. Ignore = Decodes UPC/EAN barcodes and ignores potential supplemental characters. Decode = Decodes only UPC/EAN barcodes with supplemental characters. Autodisriminate = see Decode UPC/EAN Supplemental Redundancy Smart Supplemental Mode = EAN-13 barcodes with a prefix of 378, 379 or 978 and supplemental characters are decoded with the supplemental characters. For all other UPC/EAN barcodes, the supplemental characters are ignored. 378/379 Supplemental Mode = EAN-13 barcodes with a prefix of 378 or 379 and supplemental characters are decoded with the supplemental characters. For all other UPC/EAN barcodes, the supplemental characters are ignored. 978 Supplemental Mode = EAN-13 barcodes with a prefix of 978 and supplemental characters are decoded with the supplemental characters. For all other UPC/EAN barcodes, the supplemental characters are ignored. This setup indicates how many times a barcode without supplemental characters is decoded before transmission (a value from 2 to 30 is allowed). The option Autodisriminate must be selected. Enable or disable whether the check digit of a UPC-
A barcode should be transmitted. Enable or disable whether the check digit of a UPC-
E barcode should be transmitted. Enable or disable whether the check digit of a UPC-
E1 barcode should be transmitted. No Preamble = Transmit no preamble for UPC-A. System Character = Transmit system character as preamble for UPC-A. System Char. + Country Code = Transmit system character and country code as preamble for UPC-A. x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t s g n i t t l e S e u d o M d a e H
:
a u n a M r e s U l Decode UPC/EAN Supplemental Redundancy Transmit UPC-A Check Digit Transmit UPC-E Check Digit Transmit UPC-E1 Check Digit UPC-A Preamble Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 10 / 25 Datum // date 10.07.2014 UPC-E Preamble UPC-E1 Preamble Convert UPC-E to A Convert UPC-E1 to A Security Level UCC Coupon Extended Code Enable Code 128 UCC/EAN 128 User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 No Preamble = Transmit no preamble for UPC-E. System Character = Transmit system character as preamble for UPC-E. System Char. + Country Code = Transmit system character and country code as preamble for UPC-E. No Preamble = Transmit no preamble for UPC-E1. System Character = Transmit system character as preamble for UPC-E1. System Char. + Country Code = Transmit system character and country code as preamble for UPC-
E1. Enable or disable conversion of UPC-E barcode data into UPC-A format. After conversion, the settings of UPC-A has an effect on the scanned UPC-E barcode (e.g. Transmit UPC-A Check Digit, UPC-A Preamble). Enable or disable conversion of UPC-E1 barcode data into UPC-A format. After conversion, the settings of UPC-A has an effect on the scanned UPC-E1 barcode (e.g. Transmit UPC-A Check Digit, UPC-A Preamble). Level0 = This level offers an acceptable security for most of the UPC/EAN barcodes. Level1 = Select this level if misreads of barcodes occur and the misreads are confined to specific characters (e.g. 1, 2, 3, 4). Level2 = If misreads occur and the misreads aren't confined to the specific characters, select this level. Level3 = Choose this level if misreads still occur after choosing the Level2. Enable or disable decoding of UCC Coupon Extended Code barcodes. Symbologies->Code128 Enable or disable decoding of Code 128 barcodes. Enable or disable decoding of UCC/EAN 128 barcodes. ISBT 128 Enable or disable decoding of ISBT 128 barcodes. Symbologies->Code 39 Enable Code 39 Trioptic Code 39 Convert Code 39 to Code 32 Code 32 Prefix Length Options Enable or disable decoding of Code 39 barcodes. Enable or disable decoding of Trioptic Code 39 barcodes. Enable or disable converting Code 39 to Code 32.
(Enable Code 39 must be enabled for this option) Enable or disable adding the prefix A to a Code 32 barcode.
(Convert Code 39 to Code 32 must be enabled for this option) one discrete length = Decodes only those Code 39 barcodes that have the specified length. two discrete lengths = Decodes only those Code 39 barcodes that have one of the two specified Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 11 / 25 s g n i t t l e S e u d o M d a e H
:
a u n a M r e s U l x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 lengths. lengths within a range = Decodes only those Code 39 barcodes that have a length which lies in the specified range. any length = Decodes Code 39 barcodes of any length. Enable or disable the verification of the data of a Code 39 barcode. Enable or disable whether the check digit of a Code 39 barcode should be transmitted. Enable or disable decoding of Code 39 Full ASCII barcodes. Symbologies->Code 93 Enable or disable decoding of Code 93 barcodes. one discrete length = Decodes only those Code 93 barcodes that have the specified length. two discrete lengths = Decodes only those Code 93 barcodes that have one of the two specified lengths. lengths within a range = Decodes only those Code 93 barcodes that have a length which lies in the specified range. any length = Decodes Code 93 barcodes of any length. Symbologies->Code 11 Enable or disable decoding Code 11 barcodes. one discrete length = Decodes only those Code 11 barcodes that have the specified length. two discrete lengths = Decodes only those Code 11 barcodes that have one of the two specified lengths. lengths within a range = Decodes only those Code 11 barcodes that have a length which lies in the specified range. any length = Decodes Code 11 barcodes of any length. Disable = Disable the verification of the data of a Code 11 barcode. One Check Digit = Enable the verification of the data of a Code 11 barcode and check for one check digit. Two Check Digits = Enable the verification of the data of a Code 11 barcode and check for two check digits. Enable or disable whether the check digit(s) of a Code 11 barcode should be transmitted. Symbologies->Interleaved 2 of 5 Enable or disable decoding Interleaved 2 of 5 barcodes. one discrete length = Decodes only those Interleaved 2 of 5 barcodes that have the specified Check Digit Verification Transmit Check Digit Full ASCII Conversion Enable Code 93 Length Options Enable Code 11 Length Options Check Digit Verification Transmit Check Digit(s) Enable Interleaved 2 of 5 Length Options Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 12 / 25 s g n i t t l e S e u d o M d a e H
:
a u n a M r e s U l x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 length. two discrete lengths = Decodes only those Interleaved 2 of 5 barcodes that have one of the two specified lengths. lengths within a range = Decodes only those Interleaved 2 of 5 barcodes that have a length which lies in the specified range. any length = Decodes Interleaved 2 of 5 barcodes of any length. Disable = Disable the verification of the data of an Interleaved 2 of 5 barcode. USS Check Digit = Enable the verification of the data of an Interleaved 2 of 5 barcode by using the USS (Uniform Symbology Specification) algorithm. OPCC Check Digit = Enable the verification of the data of an Interleaved 2 of 5 barcode by using the OPCC (Optical Product Code Council) algorithm. Enable or disable whether the check digit of an Interleaved 2 of 5 barcode should be transmitted. Enable or disable conversion of a 14 character Interleaved 2 of 5 barcode into EAN-13.
(The Interleaved 2 of 5 barcode must have a leading zero and a valid EAN-13 check digit.) Check Digit Verification Transmit Check Digit Convert Interleaved 2 of 5 to EAN13 Enable Discrete 2 of 5 Length Options Enable Chinese 2 of 5 Enable Codabar Length Options Symbologies->Discrete 2 of 5 Enable or disable decoding Discrete 2 of 5 barcodes. one discrete length = Decodes only those Discrete 2 of 5 barcodes that have the specified length. two discrete lengths = Decodes only those Discrete 2 of 5 barcodes that have one of the two specified lengths. lengths within a range = Decodes only those Discrete 2 of 5 barcodes that have a length which lies in the specified range. any length = Decodes Discrete 2 of 5 barcodes of any length. Symbologies->Chinese 2 of 5 Enable or disable decoding Chinese 2 of 5 barcodes. Symbologies->Codabar Enable or disable decoding Codabar barcodes. one discrete length = Decodes only those Codabar barcodes that have the specified length. two discrete lengths = Decodes only those Codabar barcodes that have one of the two specified lengths. lengths within a range = Decodes only those Codabar barcodes that have a length which lies in the specified range. any length = Decodes Codabar barcodes of any length. Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 13 / 25 s g n i t t l e S e u d o M d a e H
:
a u n a M r e s U l x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 CLSI Editing NOTIS Editing Enable MSI Length Options Check Digits Transmit Check Digit Check Digit Algorithm GS1 DataBar 14 GS1 DataBar Limited GS1 DataBar Expanded Convert GS1 DataBar to UPC/EAN Symbology identifier User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 Enable or disable removing the start and stop characters and inserting a space after the first, fifth, and tenth character of a 14-character Codabar barcode. Enable or disable removing the start and stop characters from a Codabar barcode. Symbologies->MSI Enable or disable decoding MSI barcodes. one discrete length = Decodes only those MSI barcodes that have the specified length. two discrete lengths = Decodes only those MSI barcodes that have one of the two specified lengths. lengths within a range = Decodes only those MSI barcodes that have a length which lies in the specified range. any length = Decodes MSI barcodes of any length. Choose how many check digits exists at the end of the barcode. Enable or disable whether the check digit of a MSI barcode should be transmitted. If you have selected two check digits (see Check Digits) you must select an algorithm to verify the data of a MSI barcode. Symbologies->GS1 DataBar Enable or disable decoding GS1 DataBar 14 barcodes. Enable or disable decoding GS1 DataBar Limited barcodes. Enable or disable decoding GS1 DataBar Expanded barcodes. Enable or disable conversion of a GS1 DataBar 14 or GS1 DataBar Limited barcode into UPC/EAN. If the scanned barcode have a single zero as the first digit, the leading 010 of the barcode is removed and the barcode is converted into EAN-13. If the scanned barcode begins with two or more zeros but not six zeros, the leading 0100 is removed and the barcode is converted into UPC-A. In this case the setting UPC-A Preamble which transmits the system character and country code has an effect on the scanned barcode. Symbology Options Enable or disable outputting a code ID character of a barcode. A code ID character indicates the code type of a barcode. Disable = Disables outputting of a code ID character. Aim Code ID Character = Enable outputting of the Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 14 / 25 s g n i t t l e S e u d o M d a e H
:
a u n a M r e s U l x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 Aim Code ID Character of a barcode. Each AIM Code Identifier contains the string ]cm:
] = Flag Character c = Code Character m = Modifier Character Possible Code Characters (c):
A = Code 39 C = Code 128 E = UPC/EAN F = Codabar G = Code 93 H = Code 11 I = Interleaved 2 of 5 M = MSI S = D2 of 5, IATA 2 of 5 X = Code 39 Trioptic, Bookland EAN e = GS1 DataBar Possible Modifier Characters (m):
The modifier character is the sum of the possible option values from the following table. Code Type Option Value Option Code 39 0 1 3 4 5 7 No Check character or Full ASCII processing. Reader has checked one check character. Reader has checked and stripped check character. Reader has performed Full ASCII character conversion. Reader has performed Full ASCII character conversion and checked one check character. Reader has performed Full ASCII character conversion and checked and stripped check character. Trioptic Code 39 Code 128 I 2 of 5 0 0 1 2 No option specified at this time. Always transmit 0. s g n i t t Standard data packet. No Function code 1 in first symbol position. Function code 1 in first symbol character position. Function code 1 in second symbol character position. Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 15 / 25 x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t l e S e u d o M d a e H
:
a u n a M r e s U l Datum // date 10.07.2014 User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 Codabar Code 93 MSI D 2 of 5 UPC/EAN 0 1 3 0 1 0 0 1 0 0 1 2 3 No check digit processing. Reader has validated check digit. Reader has validated and stripped check digit. No check digit processing. Reader has checked check digit. No options specified at this time. Always transmit 0. Mod 10 check digit checked and transmitted. Mod 10 check digit checked but not transmitted. No options specified at this time. Always transmit 0. Standard packet in full EAN country code format, which is 13 digits for UPC-A, UPC-E, and EAN-13 (not including supplemental data). Two digit supplement data only. Five digit supplement data only. Combined data packet comprising 13 digits from a UPC-A ,UPC-E, or EAN-13 symbol and 2 or 5 digits from a supplemental symbol. 4 EAN-8 data packet. Bookland EAN 0 No options specified at this time. Always transmit 0. Symbol Code ID Character = Enable outputting of the Symbol Code ID Character of a barcode. Possible Symbol Code ID Characters:
A = UPC-A, UPC-E, UPC-E1, EAN-8, EAN-13 B = Code 39, Code 32 C = Codabar D = Code 128, ISBT 128 E = Code 93 F = Interleaved 2 of 5 G = Discrete 2 of 5 J = MSI Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 16 / 25 s g n i t t l e S e u d o M d a e H
:
a u n a M r e s U l x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 K = UCC/EAN-128 L = Bookland EAN M = Trioptic Code 39 N = Coupon Code R = GS1 DataBar-14, GS1 DataBar Limited, GS1 DataBar Expanded 1.10 Wedge Data To set a preamble or postamble for the data which is read from a head module, open the Head Module Settings and click on Wedge Data (see Pic16). In the next window (see Pic17) set a preamble or postamble by filling out the corresponding text field and save your settings by clicking the OK button. Note: You can also set an escape literal for preamble or postamble. The following escape literals are allowed: \a, \b, \t, \n, \v, \f, \r. A second special feature for preamble/postamble is to set one of the following codes:
#TAB (sends a tab)
#SPACE (sends a space)
#ENTER (sends an enter)
#xxx (xxx stands for a decimal number between 000 and 127; you can set any ASCII character for preamble/postamble by using the decimal code of the character -> for example if you set #013 as preamble or postamble a carriage return will be sent (see more examples here)) Another option that you can make in this section of the Head Module Settings is to enable or disable the Wedge. This means that if you would disable the Wedge, no data will be output. Pic16: Head Module Settings Pic17: Settings for the Wedge s g n i t t Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 17 / 25 x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t l e S e u d o M d a e H
:
a u n a M r e s U l Datum // date 10.07.2014 1.11 Good Read User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 The Head Module Settings provide an option to set a beep for ringing out after a good read. To set this, open the Head Module Settings and click on Good Read (see Pic18). In the next window (see Pic19) you have the opportunity to set No beep, One beep or Two beeps. Save your setting by clicking the OK button. Pic18: Head Module Settings Pic19: Beep options x c o d
. s g n i t t 1.12 Enable Service A new option is included from version 1.7.5. You are now able to enable or disable the EC_Service. To set this, open the Head Module Settings and click on Enable Service (see Pic20). In the next window
(see Pic21) you can enable or disable the EC_Service by checking or unchecking the checkbox. A message is shown that you have to confirm the setting by clicking the OK button and that you have to reboot the device. This has to be done because this setting has only an effect when it is confirmed with OK and when the device is rebooted!
Pic20: Head Module Settings Pic21: Enable Service Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 18 / 25 s g n i t t l e S e u d o M d a e H
:
a u n a M r e s U l l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 1.13 Version Info User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 Last point in the Head Module Settings gives you the opportunity to get information about the service of the head modules which is installed on your device. Open the Head Module Settings and click on Version Info (see Pic22). In the next window you can see the information about the installed service
(see Pic23). Pic22: Head Module Settings Pic23: Version Info x c o d
. s g n i t t s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t l e S e u d o M d a e H
:
a u n a M r e s U l Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 19 / 25 Datum // date 10.07.2014 User Manual Head Module Settings 2 Trigger Button Settings 2.1 Map the trigger event OEM Trigger on a button Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 This is necessary to start reading with a head module. There is an event named OEM Trigger which is used in the service of the head modules to start reading with a head module. This event is mapped on the center scan and the left side lower button by default. You have five opportunities to map this event on a button: on the center scan button, on the left side upper button, on the left side lower button, on the right side upper button and on the right side lower button. To map a button on the event open the Intermec Settings. Therefore you have to click on the windows icon on the main screen. In the next step you have to click on Settings -> System -> Intermec Settings. To map the event on a button click on Device Settings -> Keypad -> Button Remapping (see Pic24-Pic26) in the Intermec Settings. In the next window you can map the OEM Trigger event on a button which you want to use to start reading with a head module (see Pic27). Pic24: Intermec Settings Pic25: Device Settings x c o d
. s g n i t t Pic26: Keypad Pic27: Button Remapping
(OEM Trigger is mapped on the center scan and the left side lower button by default) s g n i t t Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 20 / 25 l e S e u d o M d a e H
:
a u n a M r e s U l l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 2.2 Map a button on named events to catch the button by software There is a possibility to catch a button to indicate if it is pressed or released. Therefor you must do a few steps in the registry:
First step is to locate the layout of your USB keypad in the registry of your device. The path to the current active USB keypad is stored in the registry entry CurrentActiveLayoutKey which you can find in the following path of your registry:
[HKEY_LOCAL_MACHINE\Hardware\DeviceMap\Keydb]. Example: The CurrentActiveLayoutKey of a Ci70 numeric keypad is Drivers\HID\ClientDrivers\ITCKeyboard\Layout\B-Numeric\0001 as you can see in the following picture. x c o d
. s g n i t t Next step is to create named events. You need two events a delta and a state event. Choose a unique name for the events e.g. DeltaTriggerEvent and StateTriggerEvent. These two events have to be added to the list of delta and state events in the registry at the path you have located in the first step (Drivers\HID\ClientDrivers\ITCKeyboard\Layout\B-Numeric\0001). Create a new string value in the Events\Delta folder named EventX where X is the next free value and add the name DeltaTriggerEvent on it. Create also a new string value in the Events\State folder named EventX (the X has to be the same value as the X of the DeltaTriggerEvent) and add the name StateTriggerEvent. s g n i t t Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 21 / 25 l e S e u d o M d a e H
:
a u n a M r e s U l l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 x c o d
. s g n i t t Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 22 / 25 s g n i t t l e S e u d o M d a e H
:
a u n a M r e s U l l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 Third step is to map a key to the event index X of the named events DeltaTriggerEvent and StateTriggerEvent. You can find the registry entries for the active keys of the keyboard in the 0001 folder at the path you have located in the first step
(Drivers\HID\ClientDrivers\ITCKeyboard\Layout\B-Numeric\0001). There are 3 ShiftPlanes in which the key functionalities are described:
o ShiftPlane0 Normal is used if neither Gold nor Aqua key is pressed o ShiftPlane1 Gold is used if the Gold key is pressed o ShiftPlane2 Aqua is used if the Aqua key is pressed x c o d
. s g n i t t l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t In the described example the events should be mapped to the blue center scan button. For mapping the center scan button on the events DeltaTriggerEvent and StateTriggerEvent you must modify the value for that key in ShiftPlane0, ShiftPlane1 and ShiftPlane2. The value of that key is 07 90 00 02 02 01 where 07 = USB code page, 90 = USB usage, 00 02 02 = flags (02 = non-repeating (key does not auto repeat), 02 = key reacts on a named event), 01 = index of the named event. The only thing which is to do for mapping this key on the created named events is to change the last value 01 to 05 because the created events DeltaTriggerEvent and StateTriggerEvent have the index 5 because of Event5 in the registry. So add the new value 07 90 00 02 02 05 at the bottom of the list in the ShiftPlane0, ShiftPlane1 and ShiftPlane2. Now the center scan button is mapped to the created events. A reboot is necessary after doing the changes in the registry. s g n i t t Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 23 / 25 l e S e u d o M d a e H
:
a u n a M r e s U l Datum // date 10.07.2014 User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 x c o d
. s g n i t t Now all the settings in the registry are done so we can start catching that named events and do whatever we want if the center scan button is pressed. Create two events in your application source code by calling the windows function CreateEvent() and set the name of the events to the named events at the registry
(DeltaTriggerEvent and StateTriggerEvent). HANDLE hDeltaEvent = CreateEvent(NULL, FALSE, FALSE, HANDLE hStateEvent = CreateEvent(NULL, FALSE, FALSE, TEXT("StateTriggerEvent"));
TEXT("DeltaTriggerEvent"));
Next step is to wait for the delta event (DeltaTriggerEvent). Use the windows function WaitForSingleObject() or WaitForMultipleObjects() to catch the delta event. If the delta event is caught you must wait for the state event (StateTriggerEvent) to check if the center scan button is pressed or released. DWORD dwEvent = WaitForSingleObject (hDeltaEvent, INFINITE);
If(dwEvent == WAIT_OBJECT_0)
{
if(WaitForSingleObject(hStateEvent, 10) == WAIT_OBJECT_0)
{
}
else
{
// center scan button is pressed
// center scan button is released
}
}
Do this in a background thread so that the application wont blocked while waiting that the center scan button is pressed. If you do no longer need the event functionality close the event handle with the windows function CloseHandle(). Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 24 / 25 s g n i t t l e S e u d o M d a e H
:
a u n a M r e s U l l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t Datum // date 10.07.2014 3 OEM GRID 3.1 OEM Scanner Grid User Manual Head Module Settings Dokument-Nr. Revision //
document no. revision 300011AL11E 07 Teile-Nr. // part no. 300011 The Scanner Grid offers you the possibility to edit the read data from reading with a head module. To set a Scanner Grid open the Intermec Settings (Settings->System->Intermec Settings). Scroll down and click on Virtual Wedge (see Pic28). Then click on OEM Device Wedge (see Pic29). In the next window you can set a Scanner Grid (see Pic30). The expression which you can see in Pic30 says that only the last characters of read data are output. For more examples for editing the Scanner Grid see http://community.intermec.com/t5/General-Development-Developer/GRID-Examples/m-
p/3018. Pic28: Virtual Wedge Pic29: OEM Device Wedge x c o d
. s g n i t t Pic30: OEM Scanner Grid For more Information about editing Scanner Grid see http://intermec.custhelp.com/app/answers/detail/a_id/7220/kw/GRID and http://community.intermec.com/t5/forums/searchpage/tab/message?allow_punctuation=true&filter=la bels&q=grid#message-list Dokument erstellt // document created Dokument geprft // document checked Seite/gesamt // page/total SAS387 10.07.2014 FIH091 10.07.2014 25 / 25 s g n i t t l e S e u d o M d a e H
:
a u n a M r e s U l l l e s _ e u d o m _ d a e h _ a u n a m _ r e s u _ 7 0 E 1 1 L A 1 1 0 0 0 3
\
s g n i t t l e s _ e u d o m _ d a e h _ a u n a m _ r e s u l
\
i e c v r e S m o c E e d o c
\
l l e u Q
\
s t n e m u c o D 6 1 2 0 e d
\
\
s r e s U
\
:
C
:
t r o e g a b A l e v i r d O S I
:
n o i t a c o l 1 1 0 2
. 1 0
. 0 2 3 7 3 A E B
:
d e k c e h c e t l a p m e t 1 1 0 2
. 1 0
. 0 2 6 0 0 O A H
:
d e t a e r c e t l a p m e t 3 0 A 6 0 V Q 0 3 7 0
:
. o n e t l a p m e t
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-10-15 | 902 ~ 928 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2014-10-15
|
||||
1 | Applicant's complete, legal business name |
ecom instruments GmbH
|
||||
1 | FCC Registration Number (FRN) |
0020812756
|
||||
1 | Physical Address |
Industriestrasse 2
|
||||
1 |
Assamstadt, N/A 97959
|
|||||
1 |
Germany
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@telefication.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
XAM
|
||||
1 | Equipment Product Code |
300011GR07
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C**** E********
|
||||
1 | Title |
Regulatory
|
||||
1 | Telephone Number |
+4962********
|
||||
1 | Fax Number |
+4962********
|
||||
1 |
c******@ecom-ex.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
ecom instruments GmbH
|
||||
1 | Name |
C****** E****
|
||||
1 | Physical Address |
IndustriestraBe 2
|
||||
1 |
97959
|
|||||
1 |
Germany
|
|||||
1 | Telephone Number |
49629********
|
||||
1 | Fax Number |
49629********
|
||||
1 |
C******@ecom-ex.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
ecom instruments GmbH
|
||||
1 | Name |
C**** E********
|
||||
1 | Physical Address |
IndustriestraBe 2
|
||||
1 |
97959
|
|||||
1 |
Germany
|
|||||
1 | Telephone Number |
49629********
|
||||
1 | Fax Number |
49629********
|
||||
1 |
C******@ecom-ex.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 04/12/2015 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | UNI900F1 | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is conducted. This is a portable device. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
7layers AG
|
||||
1 | Name |
R******** M********
|
||||
1 | Telephone Number |
49-21********
|
||||
1 | Fax Number |
49-21********
|
||||
1 |
r******@7layers.de
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 902.00000000 | 928.00000000 | 0.3020000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC