2 Product Overview In order to make sure you get the best possible results from your new Speaker Band, please thoroughly read and carefully follow all instructions in this Users Manual or on the product. Keep this Users Manual in a convenient location for future reference. Package contents:
Speaker Band x 1 Micro USB charging cable x 1 Users Manual x 1 If any of these were missing or damaged, please visit bemwirelesss.com to obtain replacement. Compatibility All mobile devices enabled with Bluetooth technology including:
iPhones, iPads, iPods, Smartphones, Laptops, Tablets and more. Meet the Speaker Band Before learning your Speaker Band, take a momevnt to look it over and familiarize yourself with its features. 3 Product Interface 1 2
3
5 4 6 7 8 1. Microphone 2. Speaker 3. Volume down 4. Answer / End 5. Volume up 6. Power LED 7. USB 8. Power/Pair button 4 Getting Started Pairing with your mobile phone
Turn on the Speaker Band by press the Power & Pair button, and the LED with lights up with a tone power on.
Hold the Power & Pair button for 3 seconds to enter pairing mode, the LED will ash fast with a tone pairing mode. Activate Bluetooth on your mobile phone / tablet and select Speaker Band. After paired for the rst time, the Speaker Band can pair to your mobile phone automatically when it is powered on. To Turn off the Speaker Band hold the Power & Pair button for 3 seconds to enter pairing mode, the LED will goes off with a tone power off. Wear the Speaker Band Wear the Speaker Band like a watch. Tips:
Please do not expose your Speaker Band under Rain or high temperature, such as an oven. 5 Using the Speaker Band Answer / End Make call Answer / End Answer call Answer / End End call Answer / End Reject call Answer / End Re-dial last number Answer / End Play / pause Answer / End Voice Commands*
Call will automatically transfer to the speakerphone. If not, tap Answer/ end button Tap answer/end button to answer the incoming call Tap answer/end button during the call to end the call Hold answer/end button to reject the incoming call Hold answer/end button to redial last number when it is not in a call Tap answer/end button to play and pause the music play Double tap answer/end button to activate the voice command in your mobile phone
Volume down / up Hold < / > button
Play control Press < to the last track , press >
to the next track
*phone dependent 6 Caller number When there is an incoming call, it will speak out the callers number Charging the Speaker Band The power LED will ash when the battery is low. Use the supplied USB cable to charge Speaker Band. Connect the power source and Speaker Band with the micro USB charging cable, the power LED will become solid. That indicates that the device is charging. The Power LED will turn off when it is fully charged. Trouble Shooting No connection:
Make sure the Bluetooth connection of your mobile phone is on
Make sure the speaker is on
Tap the answer/end button to wake up the Speaker Band
Pair the speaker again 7 Maintenance Cleaning the Case:
To clean the case, rst unplug the power cable. To remove dirt or dust, wipe the casing with a soft, dry, lint-free cloth. To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent and then wipe the casing. Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored. Storage Always power off the Speaker Band when you are nish using it. If the unit will not be used for an extended period, be sure to follow these guidelines:
Do not store the unit in a damp environment
Avoid exposing the unit to very high or low temperatures
Avoid prolonged exposure to direct sunlight.
Charge it before use it again. 8 More Info For questions, comments or to purchase more bem wireless products go to: bemwireless.com You can also follow us at:
facebook.com/bemwireless twitter.com/bemwirelessco youtube.com/bemwireless CE2200 For information on your products warranty go to:
bemwireless.com/support FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for 9 FCC Statement (cont.) a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help FCC Radiation Exposure Statement RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. bem wireless http://bemwireless.com/
bem wireless LLC. 1725 Kilkenny Ct. Woodstock, IL. USA Made in China 10 Product Name : Speaker Band Model Number :HL2331 Power Supply: USB 5V,1A Working Temperature: 0C-40C Working Humidity: 20%-90%RH Safety Instructions This product is specially designed based on the full attention to safety; in order to make sure the accident-free operation, please abide the guidelines listed below:
Always position the unit on a stable and level surface. Unstable surface can cause the unit to topple and fall, resulting in possible damage or injury
Do not drop, unpack, open, beat, curve, prink and burn the unit Avoid using the unit nearby basins or sinks where it may come in contact with water Do not place any ware with full water on the top of the unit, such as vase, glass, pot, and please avoid placing candle on the speaker surface as well Protect the using of the unit from any overheating devices (such as radiator, heating installation, cooking stove or other heating devices) Regardless of what reasons cause the unit damage, please ask for the maintenance personnel to repair 11 Safety Instructions (cont.)
If you want to do the cleaning, please turn off the unit and unplug the power cable from the outlet rst
Set the volume properly to prevent injury to the unit and your personal health Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. WARNING:
The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, re or the like. No naked ame sources, such as lighted candles, should be placed on the apparatus. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 12 IC ID STATEMENT
- English: "
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device."
- French:"
Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
13 bem wireless | 1725 Kilkenny Court | Woodstock IL 60098 TEL: 855-839-8616 2014 bem wireless