Bluetooth Speaker BTSPK80 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions carefully. 2. Keep these instructions in a safe place. 3. Follow all instructions. 4. Do not use this product 5. Cleaning: Do not use liquid cleaners or aerosol cleaners. Clean only with a dry damp cloth. 6. Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatuses (including near water. amplifiers) that produce heat. 7. Only use attachments/accessories specified by the manufacturer. 8. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as objects have fallen into the product, does not operate normally, or has been dropped. 9. Object Entry: Never push objects of any kind into this product through the openings. FCC Warning provide uses to of 15 and part with device found cause harmful the and complies undesired FCC
(2) operation. This FCC installation. Rules. this equipment Rules. of interference, to designed generates, has These This the with interference by device This not may cause may 1:
NOTE the 15 residential in accordance used guarantee or radio television the correct
- Reorient
- Increase
- Connect
- Consult tested been are limits equipment instructions, not will occur which can one more antenna. receiving the between outlet into experienced cause may in particular a determined be interference of following the the or separation the equipment the equipment on circuit the dealer an radio/TV NOTE 2: Any changes or modifications to void the users authority to operate the equipment. relocate that reception, an or or and different technician receiver. from for a this unit not expressly IC Warning Operation is must accept subject any following the to interference received, conditions:
including This
(1) interference device that two comply with the reasonable for limits protection radiate can interference this equipment radio to radio equipment If the and harmful installation. by measures:
turning off Class a against frequency digital B harmful energy communications. device, interference if However, part to in pursuant a installed there and not no is to interference try to encouraged harmful is to and, cause the user does on, and which the receiver is connected. to that help. approved by the party responsible for compliance could This device complies with Innovation, Science and Economic Development Canada Compliance licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC exposition aux radiations:
Cet quipement est conforme avec ISEDC les limites d'exposition aux rayonnements dfinies pour un contrl environnement. Cet metteur ne doit pas tre co-localiss ou fonctionner en conjonction avec une autre antenne ou metteur. This device complies with Canadian ICES-003 and RSS-247 Thank you for your purchase. Please visit our website at www.borne-lifestyle.com E-1 LOCATION OF CONTROLS 1. Play/Pause/Call Answer/End Button 5. Loop for Strap 2. Volume - / Previous Button 6. LED Indicator Light 3. Power Button 7. Micro USB Charging Port 4. Volume + / Next Button CHARGING THE SPEAKER Using the USB charging cable provided, plug the micro USB tip into the Micro USB Charging Port and plug the other end into an USB port on your computer or USB wall charger (not included). The LED Indicator Light will illuminate red while charging and turn off when completed. A full charge will be 3-4 hours. Unplug the speaker when fully charged. POWER ON/OFF To turn on and off the speaker, press and hold the Power Button. BLUETOOTH MUSIC MODE Pairing a Bluetooth Enabled Device for the First Time to your Bluetooth Speaker NOTE: Refer to the user manual for your Bluetooth enabled device for instructions on pairing and connecting Bluetooth devices. 1. Keep the unit and your Bluetooth enabled device within 1 metre at all times during the pairing process. E-2 2. Press and hold the Power Button, release it when you will hear ready for pairing and the LED Indicator Light will start to flash blue quickly. 3. Turn on the Bluetooth function on your Bluetooth enabled device and search for Bluetooth devices. When the search is complete, select BTSPK80 from the Bluetooth device list. (If a password is required, use 0000 to finalize the pairing process.) 4. When the Bluetooth connection is successful, you will hear connected and the LED Indicator Light will illuminate blue. This means you are connected and the speaker is ready for use. NOTE:
If pairing was unsuccessful, turn off the speaker first and repeat the steps above to re-pair again. After successful pairing, paired devices will remember each other. Unless pairing information is deleted, re-pairing is not required after the first time. If you want to pair the unit with other Bluetooth enabled devices, please disconnect/remove the existing device and pair with the new device according to the steps above. 5. To increase or decrease the volume on the speaker, press and hold the Volume + or Volume
- button until the desired volume is reached. 6. To skip songs forward or backward, press the Previous or Next Button quickly until the desired song is selected 7. To pause and resume playback, press the Play/Pause button. HANDSFREE SPEAKERPHONE While the speaker is on Bluetooth Mode and successfully paired to your smartphone, you can answer phone calls through this speaker and use it as a speakerphone. Press the Call Answer/End Button to pick up and hang up a phone call. To adjust the volume press and hold the Volume + or the Volume - Button on the speaker. PRODUCT AND BATTERY DISPOSAL This product contains a built-in lithium battery and should not be disposed of in normal household waste. The battery in this device is not intended to be removed by the individual or end user. For disposal and recycling, please contact your local waste management authorities. The recycling and processing of electronic waste will make a significant contribution towards helping protect the environment. Warning: To reduce the risk of fire and burns, do not disassemble, crush, puncture, short external contacts or dispose of in fire or water. E-3 Need help? Please call us. If you encounter any difficulties with this product, please call or email us and our representatives will be ready to help you. Toll free: 1-800-593-6669 (Monday to Friday: 9am 5pm EST) Email: support@borne-lifestyle.com Thank you for your purchase. We want you to start enjoying your product. LIMITED WARRANTY Warning: Some Products may contain components that are small enough to be swallowed. Keep out of the reach of children. Before returning your Product for service under this Warranty, (i) please read the instruction manual carefully and visit our website at www.borne-lifestyle.com for product updates and extended support documentation
(e.g., Frequently Asked Questions, Common Troubleshooting Guides); (ii) please contact Borne Electronics Support if you are still having trouble with your Product. Subject to the terms and conditions herein, Borne Electronics warrants to the original purchaser of the Product
(Customer) that the Product will be free from defects in material or workmanship under normal, noncommercial use (Defects) for a period of 1 year. Warranty Period encompasses separate Coverage Periods for Parts and Labor, with each Coverage Period to begin from the original date of Customer purchase. Parts are covered for a period of 1yr. Labour is covered for 90 days. If Customer returns a defective Product during the applicable Warranty Period, Borne Electronics will, at its option during the specified Coverage Periods for Parts and Labor (as applicable), either:
(i) repair the Product or (ii) replace the Product with a new or refurbished Product, in either case free of charge to Customer for Parts and/or Labor (as applicable) during the specified Coverage Period only, and excluding applicable shipping charges for which the Customer is responsible. The foregoing states the Customers exclusive remedy and Borne Electronics sole liability for breach of the limited warranty contained herein. This Warranty specifically excludes any Product (or, as applicable, any component thereof) that has Defects resulting from: (a) any neglect or misuse by a Customer, an accident, improper application, violation of operating instructions for the Product, any other Customer-induced damage, or the alteration or removal of any Product serial number; (b) any modification or repair to Product by any party other than Borne Electronics or a party authorized in writing by Borne Electronics; (c) any damage to Product due to power surges, incorrect electrical voltage, misconnection to any device, or malfunction of any device used with the Product; (d) cosmetic damage to the Product caused by normal wear and tear; (e) shipping damage that occurs while the Product is in transit; (f) damage caused by heat sources, sunlight, electromagnetic conditions, or other climatic conditions; or (g) any acts of God. Product is sold to Customer for personal, non-commercial use only. Product is not warranted for Customers commercial or rental use. In addition, Product is not warranted against failure, and should not be used by Customer for any application where (i) there is a risk that any data stored on Product will be breached or otherwise compromised, or (ii) the data stored on Product is relied upon for medical or lifesaving applications. Borne Electronics expressly disclaims any warranty for any of the foregoing uses to the fullest extent permitted by law. Customer assumes any and all risks associated with such uses of Product, and agrees to indemnify Borne Electronics for any damages claimed against Borne Electronics for such uses. E-4 This Warranty specifically and expressly excludes any Product that is purchased by Customer as a floor or display model. Any such Product is purchased by Customer AS IS and Borne Electronics disclaims any Warranties, express or implied, in relation thereto. EXCEPT FOR THE EXPRESS WARRANTIES STATED ABOVE AND TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE PRODUCT IS PROVIDED AS IS, AND BORNE ELECTRONICS DISCLAIMS ALL OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF (I) MERCHANTABILITY, (II) FITNESS FOR A PARTICULAR PURPOSE, OR (III) NON-INFRINGEMENT OF THIRD PARTY RIGHTS. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL BORNE ELECTRONICS BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS OR REVENUES, LOSS OR INACCURACY OF ANY DATA OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE). ADDITIONALLY, EVEN IF BORNE ELECTRONICS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, BORNE ELECTRONICS AGGREGATE LIABILITY TO CUSTOMER FOR ACTUAL DIRECT DAMAGES FOR ANY CAUSE WHATSOEVER SHALL BE LIMITED TO THE CUMULATIVE PRODUCT COSTS PAID BY THAT CUSTOMER FOR THE PRODUCT CAUSING SUCH DAMAGES, IF ANY. This Warranty gives Customer specific rights, and Customer may also have other rights that vary from jurisdiction to jurisdiction. To obtain Warranty service, Customer must call Borne Electronics Support prior to making a Product Return. Customer must include with Product Return the following items: (i) a dated sales receipt that indicates the place of purchase, model number of Product, and amount paid; (ii) a detailed description of Customers problem with Product; (iii) Customers full name, phone number, and return address, and; (iv) a money order for any applicable shipping costs made out to Edco Electronics Inc. to cover return shipping charges to US and Canadian destinations only. Borne Electronics will not make return shipments to a P.O. Box. For shipping to international addresses, actual freight will be charged to Customer. Failure to enclose any of these items may delay the processing of your Warranty claim. Return your Product freight-prepaid in its original packaging, or packaging that affords an equal measure of protection. Please allow 4 to 6 weeks for the processing of your claim. Edco Electronics Inc. 8484 Esplanade Montreal, Quebec H2P 2R7 Canada Toll Free: 1-800-593-6669 (Monday to Friday: 9am to 5pm EST) Email: support@borne-lifestyle.com E-5