FCC ID: 2AJMW-BTWS250-A TWS BLUETOOTH EARPHONE

borne BTWS250 Manual Spectfication:

lithium used as one pair. wireless design, channel,HIFl-sound.could stereo(TWS),real be used Ture wireless individual separaely,or battery Battery capactiy:polymer Bluetooth Frequency:2.4GHZ Bluetooth Range:12 meters Battery capacity:Earbud:SSmAh Charging Play time:One Standby time:One case:400mAh Pair earbuds with no obstacles mode 3-4hours Pair earbuds mode 80hours u About pairing:

headset box,and the"wake mode:press to wake up up"button is is red light,the headset the headset will start up and connect.After have"red Pairing the headset.The taken out from the charging automatically connection,the blue light".Alternate flash.At bluetooth month. and headset)will does not this time just open the phone to search for flashing,left earphone host(rlght make the

successful device"BTWS250"connectlon,can FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void theusers authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

EdcoElectronicsInc. ADD:8484Avenuedel'EsplanadeMontreal,QuebecMontreal,H2P2R7Canada TEL:14387385163 FAX:15148581588 Email:jonathan@bornelifestyle.com Date: 2021-01-08 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, EdcoElectronicsInc., hereby authorize Bay Area Compliance Laboratories Corp. to act as a laboratory for testing and test report generation for the following project(s):

(Product name:TWS BLUETOOTH EARPHONE, FCC ID: 2AJMW-BTWS250-A, Model: BTWS250) The right headset and left headset have the same circuit diagram, PCB layout and key components. Right Board Left Board The chipset AC6973D supports Bluetooth BDR(GFSK), EDR(/4-DQPSK, 8DPSK) and BLE Mode, But for this device, BLE and 8DPSK were disable by software. Sincerely, Signature:

Printed name: Jonathan Lee Title: Director of Product Development

Edco Electronics Inc. ADD: 8484 Avenue de l'Esplanade Montreal, Quebec Montreal, H2P 2R7 Canada Tel: 1-438-738-5163 Fax: 1-514-858-1588 E-mail: jonathan@borne-lifestyle.com FCC Authorization Date: 2021-01-08 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We , Edco Electronics Inc., Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Clients signature Printed Name: Jonathan Lee Title: Director of Product Development QA-FR-170-B

Edco Electronics Inc . ADD:8484 Avenue de l'Esplanade Montreal, Quebec Montreal, H2P 2R7 Canada TEL: 1-438-738-5163 FAX: 1-514-858-1588 Mail: jonathan@borne-lifestyle.com Date: 2021-01-08 To FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia,MD 21046 Dear Sir/Madam, We, Edco Electronics Inc ., FCC ID:2AJMW-BTWS250-A, hereby submits justification for placing the FCC ID label to the charging box. According to the FCC Regulation and Guidence

(KDB Publication 784748 D01 v09R01) allows for the FCC to be removed to charging box if the device is unquestionably too small for the FCC ID label to be printed. The measurement of headset: Length (20mm)*Width (17mm)*High (45mm), label: Length 20(mm)*Width10(mm), charging box:59(mm)*47(mm)*24(mm).Refer to the above quote, as the headset are too small for the FCC ID label to be printed, so the FCC ID label will be moved to the charging box. For details, please see below photos:

Model:BTWS250 IC:20174-BTWS250A FCC ID:2AJMW-BTWS250-A 10mm Sincerely, Printed name: Jonathan Lee Title: Director of Product Development QA-FR-169-B

Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade Montreal, Quebec Montreal, H2P 2R7 Canada Tel: 1-438-738-5163 Fax: 1-514-858-1588 E-mail: jonathan@borne-lifestyle.com FCC Confidential Authorization Date:2020-01-08 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AJMW-BTWS250-A In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Edco Electronics Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below:

The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Block Diagram Schematics Operation Description Sincerely, Signature:

Jonathan Lee Director of Product Development QA-FR-171-A