FCC ID: 2AJMW-BTWSG20 Wireless Earbuds

BTWSG20 UM Power on/off:

1.Power On: take out the earbuds from charging case, auto power on or long touching the multi-function until the led in blue. 2.Power off: Put the earbuds back to charging case, auto power off and charging long, touching the multi-function until the led flashing in Red and lighting off Pairing:

1. Take out from charging case, earbuds auto paring, then search bluetooth match nameBTWSG20 on your Cell phone, and pair to the Cell phone. 2. LED red blue light flash while pairing 3 .LED light off when pair to cell phone successfully. Answer/refuse call Answer call: short touch either earbud, touch again hang up call refuse call: long touch 2 seconds either earbuds. Play music:

1. Short touch either earbud to pause 2. Triple short touch R earbud to play next song, Triple short touch L earbud to play Previous song, Volume + to press R sides button 2 times,Volume to press L sides button 2 times. 3. Long touch 2 seconds on either earbud to wake voice assistant. Charging:

1. Put the earbuds to the charging case, auto charging. 2. Inset the cable to Charge for the charging case, LED light on while charging, and light off , charging complete. Earbuds and Charging Case Technical details:

Pairing Bluetooth name : BTWSG20 Bluetooth Version: 5.1 Wireless Support Protocol: A2DP,AVRCP,HSP,HFP Earbud Battery capacity: 30mAh*2 Charging case Battery capacity: 230mAh Charging time: 1-2 Hour Charging Port: Type-C Frequency:2.402-2.480GHZ Play Time: 3 hours Speaker: 32 Standby Time: 120 hrs Attention:

1 Dont crash, scratch, warping the earbuds, dont throw to water. 2 Keep away from the magnet, speaker when using the earbuds 3 Avoid extreme temperature (working condition should be -100

-450) 4 Avoid moist environment Warning:

Dont use the product while charging, use the original charger. Li-polymer battery cannot be open and throw to fire, cannot connect with metal or short circuit, cannot crash, avoid moist corrosion environment, avoid heating condition( >60) Package list Bluetooth earbuds 1 pair Charging case *1 instruction book *1 FCC warning:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference , and (2) this device must accept any interference received , including interference that may cause undesired operation . Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected . Consult the dealer or an experienced radio / TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC Warning:

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le onjunc areil est conforme aux CNR dl innovation, la science et le dveloppement conomique Canada licables aux areils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

(1) lareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, onj si le brouillage est susceptible den compromettre le fonctionnement. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Tous les changements ou modifications non express ment approuv e par le responsible de la conformit pourrait vider lutilisateur est habilit exploiter lquipemen. ISEDC Radiation Exposure Statement:

This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC exposition aux radiations:

Cet quipement est conforme avec ISEDC les limites d'exposition aux rayonnements dfinies pour un contrl environnement. Cet metteur ne doit pas tre co-localiss ou fonctionner en conjonction avec une autre antenne ou metteur. Cet appareil est conforme aux limitesdexposition de rayonnement RF ISEDC tabliespour un environne-ment non contrl. Cetmetteur ne doit pas tre co-implant oufonctionner en onjunction avec toute autreantenne ou transmetteur.

Make logo in Pantone Cool Grey 8C Silkscreen in Pantone Cool Grey 8C MODEL: BTWSG20 IC: 20174-BTWSG20 FCC ID: 2AJMW-BTWSG20 230530 Made in PRC This is the production date. 23 is the year, 05 is the month and 30 is the day. Please make sure to change this accordingly for each production run.

Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montral, Qubec H2P 2R7,Canada Tel:1-438-738-5163 Fax:1-514-858-1588 Email: jonathan@borne-lifestyle.com Attestation Letter Date: 2023-06-01 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(i)(ii) Filing FCC ID:2AJMW-BTWSG20 Edco Electronics Inc.(the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Edco Electronics Inc. (the applicant) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature Contact Person: Jonathan Lee Title:Director of Product Development Edco Electronics Inc.& 8484 Avenue de l'Esplanade, Montral, Qubec H2P 2R7,Canada CFR 47 2.911(d)(5)(i)(ii) Attestation Letter

Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade Montreal, Quebec Montreal, H2P 2R7 Canada E-mail: jonathan@borne-lifestyle.com Date: 2023-05-25 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Edco Electronics Inc., hereby authorize China Certification ICT Co., Ltd

(Dongguan). to act as a laboratory for testing and test report generation for the following project(s):

(Product description: Wireless Earbuds, Model name: BTWSG20, FCC ID:2AJMW-BTWSG20) The product supports Bluetooth BDR, EDR and BLE Mode, but for this device, BLE was disable by software. The right headset and left headset have the same circuit diagram, PCB layout and key components. Right Board Left Board Sincerely, Signature:

Printed name: Jonathan Lee Title: Director of Product Development

Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montral, Qubec H2P 2R7,Canada Tel:1-438-738-5163 Fax:1-514-858-1588 Email: jonathan@borne-lifestyle.com FCC Authorization Date: 2023-06-01 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We , Edco Electronics Inc., Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Clients signature Printed Name: Jonathan Lee Title:Director of Product Development QA-FR-170-B

Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montral, Qubec H2P 2R7,Canada Tel:1-438-738-5163 Fax:1-514-858-1588 Email: jonathan@borne-lifestyle.com FCC Confidential Authorization Date: 2023-06-01 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:2AJMW-BTWSG20 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Edco Electronics Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature:

Printed name: Jonathan Lee Title:Director of Product Development QA-FR-171-A

Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montral, Qubec H2P 2R7,Canada Tel:1-438-738-5163 Fax:1-514-858-1588 Email: jonathan@borne-lifestyle.com Date: 2023-06-12 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam:

We, Edco Electronics Inc., hereby submits FCC ID:2AJMW-BTWSG20 justification for placing the FCC ID label to charging case. According to the FCC Regulation and Guidence (KDB Publication 784748 D01 v09R01) allows for the FCC to be removed to charging case if the device is Unquestionably too small for the FCC ID label to be printed. The measurement of headset:Length (32.5mm)*Width (17.6mm)*High (19.7mm), The label Length 40mm, Referring to the above quote, as the headset are too small for the FCC ID label to be printed, so the FCC ID label will be moved to the Charging case. Below photo will show the detail:

Printed Name: Jonathan Lee Title: Director of Product Development

U.S. AGENT LETTER OF ATTESTATION Date: 2023-06-01 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID:2AJMW-BTWSG20 Edco Electronics Inc.(the Applicant) certifies that, as of the date of the filing of the application, Molo Import Export LLC(U.S. agent). is our designated U.S. agent for service of process for the above referenced FCC ID. Edco Electronics Inc.(the Applicant)accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Molo Import Export LLC(U.S. agent) accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Company Name: Molo Import Export LLC Address: 2334 Crystal Mile CT, Toms River, NJ, 08755, USA FRN:0033490996 Tel.: 514 825 9781 Email: 8259781@gmail.com Signed by (printed name): Samuel Weiss Signature:

Applicant: Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montral, Qubec H2P 2R7,Canada Tel:1-438-738-5163 Email: jonathan@borne-lifestyle.com Signed by (printed name): Jonathan Lee Signature:

CFR 47 2.911(d)(7) U.S Agent