Quick Star t Guide 802.11ac Outdoor Stand-Alone/Cloud-Based Access Point ECWO3300, 4300, 5300 Series The ECWO3300/4300/5300 Series are a family of single- and dual-band (2.4/5 GHz) access points (APs) that are housed in a waterproof enclosure for mounting outdoors. The units include a built-in mounting bracket for attaching to a 1.5 to 6-
inch pole and they can be powered through their Ethernet cable connection from a power injector module that is installed indoors. The ECWO3300/4300/5300 Series includes these models:
ECWO3320 2.4 GHz stand-alone AP with internal antennas ECWO3320-L 2.4 GHz controller-based AP with internal antennas ECWO3324 2.4 GHz stand-alone AP with external antennas ECWO3324-L 2.4 GHz controller-based AP with external antennas ECWO4320 5 GHz stand-alone AP with internal antennas ECWO4320-L 5 GHz controller-based AP with internal antennas ECWO4324 5 GHz stand-alone AP with external antennas ECWO4324-L 5 GHz controller-based AP with external antennas ECWO5320 Dual-band stand-alone AP with 5 GHz internal antennas ECWO5320-L Dual-band controller-based AP with 5 GHz internal antennas ECWO5324 Dual-band stand-alone AP with external antennas ECWO5324-L Dual-band controller-based AP with external antennas ECWO3320-C 2.4 GHz cloud-based AP with internal antennas ECWO3324-C 2.4 GHz cloud-based AP with external antennas ECWO4320-C 5 GHz cloud-based AP with internal antennas ECWO4324-C 5 GHz cloud-based AP with external antennas ECWO5320-C Dual-band cloud-based AP with 5 GHz internal antennas ECWO5324-C Dual-band cloud-based AP with external antennas Note: For Safety and Regulatory information, refer to the Safety and Regulatory Information document included with the AP. www.edge-core.com 1 E052014-CS-R01 150200000891A Safety and Regulator y Information 802.11ac Outdoor Stand-Alone/Cloud-Based Access Point ECWO3300, 4300, 5300 Series This document provides information on switch safety, regulatory statements and compliances. It includes these sections:
Compliances and Safety Statements on page 1 Warnings and Cautionary Messages on page 7 Compliances and Safety Statements FCC Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. www.edge-core.com 1 E052014-CS-R01 150200000892A Safety and Regulatory Information This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operation within the 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range is restricted to an indoor environment. The 5600-5650MHz band is disabled by software during manufacturing and cannot be changed by the end user. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Professional Installation Instructions 1. Installation personal This product is designed for specific applications and needs to be installed by a qualified person who has RF and related rules knowledge. The general user shall not attempt to install or change the settings. 2. Installation location The product shall be installed at a location where the radiating antenna can be kept 20 cm from nearby persons in normal operation conditions to meet regulatory RF exposure requirements. 3. External antenna Use only the antennas that have been approved by the applicant. Non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power, which may lead to the violation of FCC/IC limits and is prohibited. 4. Installation procedure Please refer to user's manual for details. 5. Warning Please carefully select the installation position and make sure that the final output power does not exceed the limits set forcth in relevant rules. Violation of the rules could lead to serious federal penalties. Instructions d'installation professionnelle 1. Installation Ce produit est destine a un usage specifique et doit etre installe par un personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les reglages ne doivent pas etre modifies par l'utilisateur final. 2 Safety and Regulatory Information 2. Emplacement d'installation En usage normal, afin de respecter les exigences reglementaires concernant l'exposition aux radiofrequences, ce produit doit etre installe de facon a respecter une distance de 20 cm entre l'antenne emettrice et les personnes. 3. Antenn externe. Utiliser uniiquement les antennes approuvees par le fabricant. L'utilisation d'autres antennes peut conduire a un niveau de rayonnement essentiel ou non essentiel depassant les niveaux limites definis par FCC/IC, ce qui est interdit. 4. Procedure d'installation Consulter le manuel d'utilisation. 5. Avertissement Choisir avec soin la position d'installation et s'assurer que la puissance de sortie ne depasse pas les limites en vigueur. La violation de cette regle peut conduire a de serieuses penalites federales. CE Mark CE Mark Declaration of Conformance for EMI and Safety (EEC) This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National Restrictions This device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:
Country Bulgaria France Restriction Reason/Remark None General authorization required for outdoor use and public service Outdoor use limited to 10 mW e.i.r.p. within the band 2454-2483.5 MHz Military Radiolocation use. Refarming of the 2.4 GHz band has been ongoing in recent years to allow current relaxed regulation. Full implementation planned 2012 italy None Luxembourg None Norway Implemented If used outside of own premises, general authorization is required General authorization required for network and service supply(not for spectrum) This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund Russian Federation None Only for indoor applications Note: Do not use the product outdoors in France. 3 Safety and Regulatory Information Europe - EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/
5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
EN 60950-1:2006 + A11: 2009 Safety of Information Technology Equipment. EN 300 328 V1.7.1: 2006-10 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive. EN 301 489-17 V1.8.1/ 2008-04 EN 301 489-17 V2.1.1/ 2009-05 Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment. EN 55022: 2006 + A1: 2007 Limits and methods of measurement of radio disturbance characteristics of information technology equipment. EN 55024: 1998 + A1: 2001 + A2: 2003 Information technology equipment immunity characteristics limits and methods of measurement. EN 62311: 2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz). This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 - 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. 4 Safety and Regulatory Information The Declaration of Conformity (DoC) can be obtained from www.edge-core.com ->
support -> download -> declarations & certifications. This equipment may be operated in:
Bulgarian Czech esky Danish Dansk Dutch Nederlands English Estonian Eesti Finnish Suomi French Franais German Deutsch Greek Hungarian Magyar Italian Italiano Latvian Latviski
, Edge-Core , 1999/
5/EC. Edge-Core tmto prohlauje, e tento Radio LAN device je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Undertegnede Edge-Core erklrer herved, at flgende udstyr Radio LAN device overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF Hierbij verklaart Edge-Core dat het toestel Radio LAN device in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG Bij deze Accton dat deze Radio LAN device voldoet aan de essentile eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC. Hereby, Edge-Core, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Kesolevaga kinnitab Edge-Core seadme Radio LAN device vastavust direktiivi 1999/5/
E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Valmistaja Edge-Core vakuuttaa tten ett Radio LAN device tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Par la prsente Edge-Core dclare que l'appareil Radio LAN device est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE Hiermit erklrt Edge-Core, dass sich dieser/diese/dieses Radio LAN device in bereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi) Hiermit erklrt Edge-Core die bereinstimmung des Gertes Radio LAN device mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. (Wien) Edge-Core radio LAN device 1999/5/. Alulrott, Edge-Core nyilatkozom, hogy a Radio LAN device megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Con la presente Edge-Core dichiara che questo Radio LAN device conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o Edge-Core deklar, ka Radio LAN device atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. 5 Safety and Regulatory Information Lithuanian Lietuvi iuo Edge-Core deklaruoja, kad is Radio LAN device atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Maltese Malti Polish Polski Hawnhekk, Edge-Core, jiddikjara li dan Radio LAN device jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Niniejszym Edge-Core owiadcza, e Radio LAN device jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Portuguese Portugus Edge-Core declara que este Radio LAN device est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Romanian Roman Slovak Slovensky Slovenian Slovensko Spanish Espaol Swedish Svenska Turkish Turk Edge-Core declar c acest dispozitiv fr fir respect cerinele eseniale precum i alte dispoziii relevante ale Directivei 1999/5/EC. Edge-Core tmto vyhlasuje, e Radio LAN device spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. Edge-Core izjavlja, da je ta radio LAN device v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Por medio de la presente Edge-Core declara que el Radio LAN device cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE Hrmed intygar Edge-Core att denna Radio LAN device str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Edge-Core bu kablosuz cihazn temel gereksinimleri ve 1999/5/EC yonergesindeki ilgili koullar karladn beyan eder. NCC Statement
(Taiwan) 5.25 ~ 5.35GHz
( ) 6 Safety and Regulatory Information Warnings and Cautionary Messages Warning: This product does not contain any serviceable user parts. Warning: Installation and removal of the unit must be carried out by qualified personnel only. Warning: When connecting this device to a power outlet, connect the field ground lead on the tri-pole power plug to a valid earth ground line to prevent electrical hazards. Caution: Wear an anti-static wrist strap or take other suitable measures to prevent electrostatic discharge when handling this equipment. Caution: Do not plug a phone jack connector in the RJ-45 port. This may damage this device. Caution: Use only twisted-pair cables with RJ-45 connectors that conform to FCC standards. Caution: The planning and installation of the AP requires professional personnel that are trained in the installation of radio transmitting equipment. The user is responsible for compliance with local regulations concerning items such as antenna power, use of lightning arrestors, grounding, and radio mast or tower construction. Therefore, it is recommended to consult a professional contractor knowledgeable in local radio regulations prior to equipment installation. Caution: Do not install the power injector outdoors. The unit is for indoor installation only. Caution: Install lightning protection at the power injector end of the Ethernet cable, use a lightning arrestor immediately before the cable enters the building. Caution: Be sure that grounding is available and that it meets local and national electrical codes. Grounding the AP must be performed by a professional installer. Caution: Grounding the outdoor-rated Ethernet cable must be performed by a professional installer in conformance with local safety regulations. 7 Quick Start Guide Follow the steps in this guide to install the AP in your network. Caution: The planning and installation of the AP requires professional personnel that are trained in the installation of radio transmitting equipment. The user is responsible for compliance with local regulations concerning items such as antenna power, use of lightning arrestors, grounding, and radio mast or tower construction. Therefore, it is recommended to consult a professional contractor knowledgeable in local radio regulations prior to equipment installation. 1. Unpack the AP Unpack the AP and check the package contents. ECWO3300, 4300, or 5300 Series Outdoor Access Point Pole-mounting kit includes two steel-band clamps PoE power injector with power cord either US, Continental Europe or UK Documentation Quick Start Guide and Regulatory and Safety Information 2. Mount the AP After planning your installation, mount the unit on a pole, mast, or tower using the included two steel-band clamps. Also install the external antennas required for your wireless service. 1 2 Pole Mounting 1 2 Feed the steel-band clamps through the integrated pole-mount bracket points on the back of the AP. Fasten the steel-band clamps around the pole to secure the AP to the pole. 2 2 3 1 Quick Start Guide Attach External Antennas 1 2 3 Remove the front port cover by pushing the locking tab up and then sliding the cover off. Connect external antennas to the APs 5 GHz RP-SMA connectors using RF coaxial cable provided in the antenna package. Connect external antennas to the APs 2.4 GHz RP-SMA connectors using RF coaxial cable provided in the antenna package. Note: The number of available 2.4 GHz or 5 GHz external antenna connectors depends on the specific model. 3. Connect Cables Connect outdoor-rated Ethernet cable to the 1000BASE-T RJ-45 ETH0 (PoE) port on the unit. 1 2 3 4 Connect outdoor-rated Category 5e or better cable to the left-side RJ-45 ETH0 (PoE) port.
(Optional) Connect a local LAN switch or computer to the right-side ETH1 100BASE-TX RJ-45 port. Pass the cables through the access holes at the bottom of the AP. Replace the port cover on the AP and push the locking tab down to secure it in place. 2 1 3 4 4. Connect Power Install the PoE power injector indoors. Connect the power injector to the Ethernet cable from the AP, to a port on a local LAN switch, and then to an AC power source. Caution: The power injector module is designed for indoor use only. Never mount the power injector outside with the AP unit. 3 Quick Start Guide 1 2 3 Connect the Ethernet cable from the AP to the POE port on the power injector. Connect Ethernet cable from the LAN port on the power injector to a LAN switch. Connect the power cord to a nearby AC power source (100-240 VAC, 50/60 Hz). 3 1 2 Note: Connecting the Ethernet cable from the AP to the injector module powers on the unit. 5. Verify AP Operation Verify basic AP operation by checking the system LEDs. The power LED should be on green, the ETH0 port LED on/blinking green, and the 2.4GHz/5GHz wireless LED on/blinking green (2.4 GHz) or blue (5 GHz). 1 2 3 4 5 2.4GHz/5GHz signal strength LEDs. 2.4GHz/5GHz link/activity LED. ETH1 port link/activity LED. ETH0 (PoE) port link/activity LED. Power LED. 1 2 3 4 5 4 Quick Start Guide 6. Connect to the Web User Interface The stand-alone APs offer a web-based management interface for the configuration of all the units features. You can make initial configuration changes by connecting a PC directly to the APs ETH1 RJ-45 port. The AP has a default management IP address of 192.168.2.1 and a subnet mask of 255.255.255.0. You must set your PC IP address to be on the same subnet as the AP (that is, the PC and AP addresses must both start 192.168.2.x). Log in to the web interface using the default settings:
Login Name root Password admin123 For more information on stand-alone AP configuration using the web interface, refer to the Management Guide. For more information on cloud-based AP configuration, refer to the relevant wireless controller documentation. 5 Hardware Specifications Quick Start Guide Item Chassis Specification Size (H x W x D:) 280.86 x 91.85 x 50.35 mm (11.06 x 3.62 x 1.98 inches) Weight Temperature 0.75 kg (1.65 lb) Operating: -20 C to 65 C (-4 F to 149 F) Storage: -30 C to 80 C (-22 F to 176 F) Humidity Operating: 15% to 95% (non-condensing) Waterproof/Dustproof IP55 Network Interfaces Ports 2.4 GHz Radio 5 GHz Radio Radio Frequencies ETH0 (PoE) RJ-45 Port: 1000BASE-T, passive PoE ETH1 RJ-45 Port: 100BASE-TX IEEE 802.11b/g/n IEEE 802.11a/n/ac 2400 ~ 2483.5 MHz 2412 ~ 2472 MHz 5745 ~ 5825 MHz (China) 5180 ~ 5320 MHz (ETSI) 5500 ~ 5700 MHz (ETSI) Power Supply PoE Input Power 24 VDC, 1.0 A Power Consumption 24 W maximum Power Injector Module 100-240 VAC, 50-60 Hz, auto-sensing Regulatory Compliances Radio EN 300 328 V1.8.1:2012 EN 301 893 V1.7.1:2012 EN 301 489-1 V1.9.2 (2011-09) EN 301 489-7 V1.3.1:2005 FCC Part 15C 15.247/15.207 (2.4-2.4835GHz, 5.725-5.850GHz) FCC Part 15E 15.407 (5.150GHz-5.250GHz) Emissions Immunity Safety EN 55022 2010+AC:2011 EN 61000-3-2 2006+A1:2009+A2:2009 FCC Class B Part 15 EN 55024 : 2010 EN 61000-4-2 : 2009 UL/CUL (CSA/UL60950-1, CSA/UL60950-22) CB (IEC60950-1, IEC60950-22) 6