FCC ID: YZKWAP3110 IEEE 802.11b/g/n Enterprise Access Point

Safety and Regulator y Information IEEE 802.11b/g/n Enterprise Access Point WAP3110-L This document provides information on switch safety, regulatory statements and compliances. It includes these sections:

Compliances and Safety Statements on page 1 Warnings and Cautionary Messages on page 6 Compliances and Safety Statements FCC Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. This transmitter must not be co-

located or operating in conjunction with any other antenna or transmitter. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. www.smc.com 1 E042013-AP-R01 Safety and Regulatory Information This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. NCC (Taiwan)

CE Mark CE Mark Declaration of Conformance for EMI and Safety (EEC) This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National Restrictions This device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:

Country Bulgaria France Restriction Reason/Remark None General authorization required for outdoor use and public service Outdoor use limited to 10 mW e.i.r.p. within the band 2454-2483.5 MHz Military Radiolocation use. Refarming of the 2.4 GHz band has been ongoing in recent years to allow current relaxed regulation. Full implementation planned 2012 italy None Luxembourg None Norway Implemented If used outside of own premises, general authorization is required General authorization required for network and service supply(not for spectrum) This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund Russian Federation None Only for indoor applications 2 Safety and Regulatory Information Note: Do not use the product outdoors in France. Europe - EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/

5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:

EN 60950-1:2006 + A11: 2009 Safety of Information Technology Equipment. EN 300 328 V1.7.1: 2006-10 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive. EN 301 489-17 V1.8.1/ 2008-04 EN 301 489-17 V2.1.1/ 2009-05 Electromagnetic compatibility and Radio spectrum Matters (ERM);

Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems. EN 55022: 2006 + A1: 2007 Limits and methods of measurement of radio disturbance characteristics of information technology equipment. EN 55024: 1998 + A1: 2001 + A2: 2003 Information technology equipment immunity characteristics limits and methods of measurement. EN 62311: 2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz). This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 - 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. 3 Safety and Regulatory Information This equipment may be operated in:

Bulgarian Czech esky Danish Dansk Dutch Nederlands English Estonian Eesti Finnish Suomi French Franais German Deutsch Greek Hungarian Magyar Italian Italiano Latvian Latviski

, SMC , 1999/5/

EC. SMC tmto prohlauje, e tento Radio LAN device je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Undertegnede SMC erklrer herved, at flgende udstyr Radio LAN device overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF Hierbij verklaart SMC dat het toestel Radio LAN device in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG Bij deze SMC dat deze Radio LAN device voldoet aan de essentile eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC. Hereby, SMC, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Kesolevaga kinnitab SMC seadme Radio LAN device vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Valmistaja SMC vakuuttaa tten ett Radio LAN device tyyppinen laite on direktiivin 1999/

5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Par la prsente SMC dclare que l'appareil Radio LAN device est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE Hiermit erklrt SMC, dass sich dieser/diese/dieses Radio LAN device in bereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi) Hiermit erklrt SMC die bereinstimmung des Gertes Radio LAN device mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. (Wien) SMC radio LAN device 1999/5/. Alulrott, SMC nyilatkozom, hogy a Radio LAN device megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Con la presente SMC dichiara che questo Radio LAN device conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o SMC deklar, ka Radio LAN device atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. 4 Safety and Regulatory Information Lithuanian Lietuvi iuo SMC deklaruoja, kad is Radio LAN device atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Maltese Malti Polish Polski Hawnhekk, SMC, jiddikjara li dan Radio LAN device jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Niniejszym SMC owiadcza, e Radio LAN device jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Portuguese Portugus SMC declara que este Radio LAN device est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Romanian Roman Slovak Slovensky Slovenian Slovensko Spanish Espaol Swedish Svenska Turkish Turk SMC declar c acest dispozitiv fr fir respect cerinele eseniale precum i alte dispoziii relevante ale Directivei 1999/5/EC. SMC tmto vyhlasuje, e Radio LAN device spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. SMC izjavlja, da je ta radio LAN device v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Por medio de la presente SMC declara que el Radio LAN device cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/

5/CE Hrmed intygar SMC att denna Radio LAN device str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. SMC bu kablosuz cihazn temel gereksinimleri ve 1999/5/EC yonergesindeki ilgili koullar karladn beyan eder. 5 Safety and Regulatory Information Warnings and Cautionary Messages Warning: This product does not contain any serviceable user parts. Warning: Installation and removal of the unit must be carried out by qualified personnel only. Warning: When connecting this device to a power outlet, connect the field ground lead on the tri-pole power plug to a valid earth ground line to prevent electrical hazards. Caution: Wear an anti-static wrist strap or take other suitable measures to prevent electrostatic discharge when handling this equipment. Caution: Do not plug a phone jack connector in the RJ-45 port. This may damage this device. Caution: Use only twisted-pair cables with RJ-45 connectors that conform to FCC standards. Caution: The planning and installation of the AP requires professional personnel that are trained in the installation of radio transmitting equipment. The user is responsible for compliance with local regulations concerning items such as antenna power, use of lightning arrestors, grounding, and radio mast or tower construction. Therefore, it is recommended to consult a professional contractor knowledgeable in local radio regulations prior to equipment installation. 6

Safety and Regulator y Information IEEE 802.11b/g/n Enterprise Access Point WAP3110 This document provides information on switch safety, regulatory statements and compliances. It includes these sections:

Compliances and Safety Statements on page 1 Warnings and Cautionary Messages on page 6 Compliances and Safety Statements FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. This transmitter must not be co-

located or operating in conjunction with any other antenna or transmitter. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. www.smc.com 1 E042013-AP-R01 Safety and Regulatory Information This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. NCC (Taiwan)

CE Mark CE Mark Declaration of Conformance for EMI and Safety (EEC) This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National Restrictions This device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:

Country Bulgaria France Restriction Reason/Remark None General authorization required for outdoor use and public service Outdoor use limited to 10 mW e.i.r.p. within the band 2454-2483.5 MHz Military Radiolocation use. Refarming of the 2.4 GHz band has been ongoing in recent years to allow current relaxed regulation. Full implementation planned 2012 italy None Luxembourg None Norway Implemented If used outside of own premises, general authorization is required General authorization required for network and service supply(not for spectrum) This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund Russian Federation None Only for indoor applications 2 Safety and Regulatory Information Note: Do not use the product outdoors in France. Europe - EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/

5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:

EN 60950-1:2006 + A11: 2009 Safety of Information Technology Equipment. EN 300 328 V1.7.1: 2006-10 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive. EN 301 489-17 V1.8.1/ 2008-04 EN 301 489-17 V2.1.1/ 2009-05 Electromagnetic compatibility and Radio spectrum Matters (ERM);

Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems. EN 55022: 2006 + A1: 2007 Limits and methods of measurement of radio disturbance characteristics of information technology equipment. EN 55024: 1998 + A1: 2001 + A2: 2003 Information technology equipment immunity characteristics limits and methods of measurement. EN 62311: 2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz). This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 - 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. 3 Safety and Regulatory Information This equipment may be operated in:

Bulgarian Czech esky Danish Dansk Dutch Nederlands English Estonian Eesti Finnish Suomi French Franais German Deutsch Greek Hungarian Magyar Italian Italiano Latvian Latviski

, SMC , 1999/5/

EC. SMC tmto prohlauje, e tento Radio LAN device je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Undertegnede SMC erklrer herved, at flgende udstyr Radio LAN device overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF Hierbij verklaart SMC dat het toestel Radio LAN device in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG Bij deze SMC dat deze Radio LAN device voldoet aan de essentile eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC. Hereby, SMC, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Kesolevaga kinnitab SMC seadme Radio LAN device vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Valmistaja SMC vakuuttaa tten ett Radio LAN device tyyppinen laite on direktiivin 1999/

5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Par la prsente SMC dclare que l'appareil Radio LAN device est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE Hiermit erklrt SMC, dass sich dieser/diese/dieses Radio LAN device in bereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi) Hiermit erklrt SMC die bereinstimmung des Gertes Radio LAN device mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. (Wien) SMC radio LAN device 1999/5/. Alulrott, SMC nyilatkozom, hogy a Radio LAN device megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Con la presente SMC dichiara che questo Radio LAN device conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o SMC deklar, ka Radio LAN device atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. 4 Safety and Regulatory Information Lithuanian Lietuvi iuo SMC deklaruoja, kad is Radio LAN device atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Maltese Malti Polish Polski Hawnhekk, SMC, jiddikjara li dan Radio LAN device jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Niniejszym SMC owiadcza, e Radio LAN device jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Portuguese Portugus SMC declara que este Radio LAN device est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Romanian Roman Slovak Slovensky Slovenian Slovensko Spanish Espaol Swedish Svenska Turkish Turk SMC declar c acest dispozitiv fr fir respect cerinele eseniale precum i alte dispoziii relevante ale Directivei 1999/5/EC. SMC tmto vyhlasuje, e Radio LAN device spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. SMC izjavlja, da je ta radio LAN device v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Por medio de la presente SMC declara que el Radio LAN device cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/

5/CE Hrmed intygar SMC att denna Radio LAN device str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. SMC bu kablosuz cihazn temel gereksinimleri ve 1999/5/EC yonergesindeki ilgili koullar karladn beyan eder. 5 Safety and Regulatory Information Warnings and Cautionary Messages Warning: This product does not contain any serviceable user parts. Warning: Installation and removal of the unit must be carried out by qualified personnel only. Warning: When connecting this device to a power outlet, connect the field ground lead on the tri-pole power plug to a valid earth ground line to prevent electrical hazards. Caution: Wear an anti-static wrist strap or take other suitable measures to prevent electrostatic discharge when handling this equipment. Caution: Do not plug a phone jack connector in the RJ-45 port. This may damage this device. Caution: Use only twisted-pair cables with RJ-45 connectors that conform to FCC standards. Caution: The planning and installation of the AP requires professional personnel that are trained in the installation of radio transmitting equipment. The user is responsible for compliance with local regulations concerning items such as antenna power, use of lightning arrestors, grounding, and radio mast or tower construction. Therefore, it is recommended to consult a professional contractor knowledgeable in local radio regulations prior to equipment installation. 6

Quick Star t Guide IEEE 802.11b/g/n Enterprise Access Point WAP3110-L The WAP3110-L is a IEEE 802.11b/g/n access point (AP) that is designed to deliver high-performance wireless services for clients in an enterprise environment. Housed in a compact enclosure, the unit includes its own built-in options for mounting on a wall, or suspended ceiling T-rail. The unit can be powered through a PoE cable connection from a PoE network switch, or from its AC power adapter. In addition, the AP supports network management from an SMC WAC4502 wireless access controller throught the Control and Provisioning of Wireless Access Points

(CAPWAP) protocol. NOTE: For detailed access point (AP) installation information, refer to the Installation Guide, which is on the Documentation CD included with the AP. NOTE: For Safety and Regulatory information, refer to the Safety and Regulatory Information document included with the AP. The AP includes its own built-in features for mounting the unit to a wall or suspended ceiling T-rail. Caution: The planning and installation of the AP requires professional personnel that are trained in the installation of radio transmitting equipment. The user is www.smc.com 1 E042013-AP-R01 Quick Start Guide responsible for compliance with local regulations concerning items such as antenna power, use of lightning arrestors, grounding, and radio mast or tower construction. Therefore, it is recommended to consult a professional contractor knowledgeable in local radio regulations prior to equipment installation. Follow these steps to install the AP:

1. Unpack the AP Unpack the AP and check the package contents. WAP3110-L Enterprise Access Point AC Power adapter Console cable (RJ-45 to DB-9) Quick Start Guide (this guide) Regulatory and Safety Information Documentation CD includes Installation Guide 2. Mount the AP After planning your installation, mount the unit on a wall or suspended ceiling T-rail. 1 2

.Mounting on a Wall 1 2 Set two screws in the wall 6.2 mm (2.4 in.) apart. Slide the APs wall mounting slots down onto the screws so that the unit is secure. 2 Quick Start Guide 1 2

.Mounting on a Ceiling T-rail 1 2 Position the APs ceiling-mount clip holders on either side of the T-rail. Turn the AP until the two clips lock the AP to the T-rail. 3. Connect Cables Connect network cable to the RJ-45 port for your network connection. The RJ-45 port connection can also provide PoE power to the unit. 1 1 Connect Category 5e or better cable to the RJ-45 port. 3 Quick Start Guide 4. Connect Power If you do not power the unit using PoE, connect the AC power adapter to the AP and to an AC power source. 1 2 1 2 Connect the power adapter to the power socket. Connect the power adapter to a nearby AC power source. 5. Verify AP Operation Verify basic AP operation by checking the system LEDs. The Power LED should be on green and the Network LED on or flashing amber. 1 2 1 2 Network Link/Activity Power/Diagnostic 4 6. Connect to the Console Port To make initial configuration changes to the AP, connect a PC to the APs console port using the included console cable. Quick Start Guide 1 1 Console Port From a PC running VT-100 terminal emulator software, use the following settings:

Baud rate 115,200 bps Character Size 8 Characters Parity None Stop bit One Data bits 8 Flow control none Log in to the command-line interface (CLI) using default settings:

Login Name admin Password null (there is no default password) For information on manually configuring an IP address for the AP, refer to the Installation Guide, which is on the Documentation CD included with the AP. For further information on AP configuration and CLI commands, refer to the Management Guide, which is on the Documentation CD included with the AP. 5 Quick Start Guide Hardware Specifications Item Specification Chassis Specifications Size Weight Temperature W x D x H: 140 x 140 x 47.8 mm (5.51 x 5.51 x 1.88 inches) 500 g (1.10 lbs) Operating: 0 C to 40 C (32 F to 104 F) Storage: -20 C to 70 C (-4 F to 158 F) Humidity Operating: 5% to 95% (non-condensing) Network Interfaces Ports One RJ-45 Port: 1000BASE-T, PoE (PD) 2.4GHz Radio Radio Frequencies IEEE 802.11b/g/n 2400 ~ 2483.5 MHz 2412 ~ 2472 MHz Power Supply Specifications PoE Input Power 48 VDC, 0.3A AC Power Adapter AC Input: 100 ~ 240 VAC DC Output: 12 VDC, 2 A Power Consumption 22.5 W maximum Regulatory Compliances Radio Emissions Immunity Safety ETSI 300 328 (802.11b/g) ETSI 301 893 (802.11a Full range) ETSI 301 489 (DC power) FCC Part 15C 15.247/15.207 (2.4-2.4835GHz) NCC LP0002 (2.4-2.4835GHz) EN 55022:2007, Class A/B IEC 61000-3-2/3 FCC Class B Part 15 CNS13438 EN 55024:2001 + A2:2003 IEC 61000-4-2/3/4/5/6/8/11 CSA c us (CSA/UL60950-1) CB (IEC60950-1) 6 Quick Start Guide Safety and Regulator y Information IEEE 802.11b/g/n Enterprise Access Point WAP3110-L This document provides information on switch safety, regulatory statements and compliances. It includes these sections:

Compliances and Safety Statements on page 7 Warnings and Cautionary Messages on page 12 Compliances and Safety Statements FCC Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. This transmitter must not be co-

located or operating in conjunction with any other antenna or transmitter. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 7 Quick Start Guide This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. NCC (Taiwan)

CE Mark CE Mark Declaration of Conformance for EMI and Safety (EEC) This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National Restrictions This device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:

Country Bulgaria France Restriction Reason/Remark None General authorization required for outdoor use and public service Outdoor use limited to 10 mW e.i.r.p. within the band 2454-2483.5 MHz Military Radiolocation use. Refarming of the 2.4 GHz band has been ongoing in recent years to allow current relaxed regulation. Full implementation planned 2012 italy None Luxembourg None Norway Implemented If used outside of own premises, general authorization is required General authorization required for network and service supply(not for spectrum) This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund Russian Federation None Only for indoor applications 8 Quick Start Guide Note: Do not use the product outdoors in France. Europe - EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/

5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:

EN 60950-1:2006 + A11: 2009 Safety of Information Technology Equipment. EN 300 328 V1.7.1: 2006-10 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive. EN 301 489-17 V1.8.1/ 2008-04 EN 301 489-17 V2.1.1/ 2009-05 Electromagnetic compatibility and Radio spectrum Matters (ERM);

Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems. EN 55022: 2006 + A1: 2007 Limits and methods of measurement of radio disturbance characteristics of information technology equipment. EN 55024: 1998 + A1: 2001 + A2: 2003 Information technology equipment immunity characteristics limits and methods of measurement. EN 62311: 2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz). This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 - 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. 9 Quick Start Guide This equipment may be operated in:

Bulgarian Czech esky Danish Dansk Dutch Nederlands English Estonian Eesti Finnish Suomi French Franais German Deutsch Greek Hungarian Magyar Italian Italiano Latvian Latviski

, SMC , 1999/5/

EC. SMC tmto prohlauje, e tento Radio LAN device je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Undertegnede SMC erklrer herved, at flgende udstyr Radio LAN device overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF Hierbij verklaart SMC dat het toestel Radio LAN device in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG Bij deze SMC dat deze Radio LAN device voldoet aan de essentile eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC. Hereby, SMC, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Kesolevaga kinnitab SMC seadme Radio LAN device vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Valmistaja SMC vakuuttaa tten ett Radio LAN device tyyppinen laite on direktiivin 1999/

5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Par la prsente SMC dclare que l'appareil Radio LAN device est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE Hiermit erklrt SMC, dass sich dieser/diese/dieses Radio LAN device in bereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi) Hiermit erklrt SMC die bereinstimmung des Gertes Radio LAN device mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. (Wien) SMC radio LAN device 1999/5/. Alulrott, SMC nyilatkozom, hogy a Radio LAN device megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Con la presente SMC dichiara che questo Radio LAN device conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o SMC deklar, ka Radio LAN device atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. 10 Quick Start Guide Lithuanian Lietuvi iuo SMC deklaruoja, kad is Radio LAN device atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Maltese Malti Polish Polski Hawnhekk, SMC, jiddikjara li dan Radio LAN device jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Niniejszym SMC owiadcza, e Radio LAN device jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Portuguese Portugus SMC declara que este Radio LAN device est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Romanian Roman Slovak Slovensky Slovenian Slovensko Spanish Espaol Swedish Svenska Turkish Turk SMC declar c acest dispozitiv fr fir respect cerinele eseniale precum i alte dispoziii relevante ale Directivei 1999/5/EC. SMC tmto vyhlasuje, e Radio LAN device spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. SMC izjavlja, da je ta radio LAN device v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Por medio de la presente SMC declara que el Radio LAN device cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/

5/CE Hrmed intygar SMC att denna Radio LAN device str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. SMC bu kablosuz cihazn temel gereksinimleri ve 1999/5/EC yonergesindeki ilgili koullar karladn beyan eder. 11 Quick Start Guide Warnings and Cautionary Messages Warning: This product does not contain any serviceable user parts. Warning: Installation and removal of the unit must be carried out by qualified personnel only. Warning: When connecting this device to a power outlet, connect the field ground lead on the tri-pole power plug to a valid earth ground line to prevent electrical hazards. Caution: Wear an anti-static wrist strap or take other suitable measures to prevent electrostatic discharge when handling this equipment. Caution: Do not plug a phone jack connector in the RJ-45 port. This may damage this device. Caution: Use only twisted-pair cables with RJ-45 connectors that conform to FCC standards. Caution: The planning and installation of the AP requires professional personnel that are trained in the installation of radio transmitting equipment. The user is responsible for compliance with local regulations concerning items such as antenna power, use of lightning arrestors, grounding, and radio mast or tower construction. Therefore, it is recommended to consult a professional contractor knowledgeable in local radio regulations prior to equipment installation. 12

Quick Star t Guide IEEE 802.11b/g/n Enterprise Access Point WAP3110 NOTE: For detailed access point (AP) installation information, refer to the Installation Guide, which is on the Documentation CD included with the AP. NOTE: For Safety and Regulatory information, refer to the Safety and Regulatory Information document included with the AP. Installation Information The AP includes its own built-in features for mounting the unit to a wall or suspended ceiling T-rail. Caution: The planning and installation of the AP requires professional personnel that are trained in the installation of radio transmitting equipment. The user is responsible for compliance with local regulations concerning items such as antenna power, use of lightning arrestors, grounding, and radio mast or tower construction. Therefore, it is recommended to consult a professional contractor knowledgeable in local radio regulations prior to equipment installation. Follow these steps to install the AP:

1. Unpack the AP Unpack the AP and check the package contents. WAP3110 Enterprise Access Point AC Power adapter Console cable (RJ-45 to DB-9) Quick Start Guide (this guide) Regulatory and Safety Information Documentation CD includes Installation Guide and Management Guide www.smc.com 1 E042013-AP-R01 Quick Start Guide 2. Mount the AP After planning your installation, mount the unit on a wall or suspended ceiling T-rail. 1 2

.Mounting on a Wall 1 2 Set two screws in the wall 6.2 mm (2.4 in.) apart. Slide the APs wall mounting slots down onto the screws so that the unit is secure. 1 2

.Mounting on a Ceiling T-rail 1 2 Position the APs ceiling-mount clip holders on either side of the T-rail. Turn the AP until the two clips lock the AP to the T-rail. 2 3. Connect Cables Connect network cable to the RJ-45 port for your network connection. The RJ-45 port connection can also provide PoE power to the unit. Quick Start Guide 1 1 Connect Category 5e or better cable to the RJ-45 port. 4. Connect Power If you do not power the unit using PoE, connect the AC power adapter to the AP and to an AC power source. 1 2 1 2 Connect the power adapter to the power socket. Connect the power adapter to a nearby AC power source. 3 Quick Start Guide 5. Verify AP Operation Verify basic AP operation by checking the system LEDs. The Power LED should be on green and the Network LED on or flashing amber. 1 2 1 2 Network Link/Activity Power/Diagnostic 6. Connect to the Console Port To make initial configuration changes to the AP, connect a PC to the APs console port using the included console cable. 1 1 Console Port 4 Quick Start Guide From a PC running VT-100 terminal emulator software, use the following settings:

Baud rate 115,200 bps Character Size 8 Characters Parity None Stop bit One Data bits 8 Flow control none Log in to the command-line interface (CLI) using default settings:

Login Name admin Password null (there is no default password) For information on AP configuration and CLI commands, refer to the Management Guide, which is on the Documentation CD included with the AP. 5 Quick Start Guide Hardware Specifications Item Specification Chassis Specifications Size Weight Temperature W x D x H: 140 x 140 x 47.8 mm (5.51 x 5.51 x 1.88 inches) 500 g (1.10 lbs) Operating: 0 C to 40 C (32 F to 104 F) Storage: -20 C to 70 C (-4 F to 158 F) Humidity Operating: 5% to 95% (non-condensing) Network Interfaces Ports One RJ-45 Port: 1000BASE-T, PoE (PD) 2.4GHz Radio Radio Frequencies IEEE 802.11b/g/n 2400 ~ 2483.5 MHz 2412 ~ 2472 MHz Power Supply Specifications PoE Input Power 48 VDC, 0.3A AC Power Adapter AC Input: 100 ~ 240 VAC DC Output: 12 VDC, 2 A Power Consumption 22.5 W maximum Regulatory Compliances Radio Emissions Immunity Safety ETSI 300 328 (802.11b/g) ETSI 301 893 (802.11a Full range) ETSI 301 489 (DC power) FCC Part 15C 15.247/15.207 (2.4-2.4835GHz) NCC LP0002 (2.4-2.4835GHz) EN 55022:2007, Class A/B IEC 61000-3-2/3 FCC Class B Part 15 CNS13438 EN 55024:2001 + A2:2003 IEC 61000-4-2/3/4/5/6/8/11 CSA c us (CSA/UL60950-1) CB (IEC60950-1) 6