all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 4.50 MiB | March 17 2022 / September 14 2022 | delayed release | ||
1 |
|
Internal photos | Internal Photos | 365.99 KiB | March 17 2022 / September 14 2022 | delayed release | ||
1 |
|
External Photos | External Photos | 352.86 KiB | March 17 2022 / September 14 2022 | delayed release | ||
1 |
|
ID Label and Location info | ID Label/Location Info | 312.42 KiB | March 17 2022 | |||
1 | Cover Letter(s) | March 17 2022 | ||||||
1 | Block Diagram | Block Diagram | March 17 2022 | confidential | ||||
1 |
|
Confidentiality Letter | Cover Letter(s) | 118.99 KiB | March 17 2022 | |||
1 |
|
Model declaration letter | Cover Letter(s) | 107.65 KiB | March 17 2022 | |||
1 | Operation Description | Operational Description | March 17 2022 | confidential | ||||
1 |
|
RF Exposure info | RF Exposure Info | 51.74 KiB | March 17 2022 | |||
1 | Schematics Bluetooth module | Schematics | March 17 2022 | confidential | ||||
1 | Schematics Main | Schematics | March 17 2022 | confidential | ||||
1 |
|
Test Report | Test Report | 3.55 MiB | March 17 2022 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 1.74 MiB | March 17 2022 / September 14 2022 | delayed release |
1 | User Manual | Users Manual | 4.50 MiB | March 17 2022 / September 14 2022 | delayed release |
Dongguan Planum Audio Systems Co., LTD No. 2 East Industry Road, Songshan Lake Naonal High-tech Industrial Development Zone, Dongguan 523808 China www.airpulseaudio.com Printed in China A300 Active Speaker System User manual Mode d'emploi Important safety instrucon Important safety instrucon Please read the following contents carefully before turning on your equipment; and follow the instrucons below. Keep this informaon around for future reference. 1. Please read the instrucons carefully. Keep it in safe place for future reference 2. Heed all warnings. 3. Follow all instrucons. 4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat. 5. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. 6. Protect the power cord from being walked on or pinched parcularly at plugs, convenience receptacles, and the point where they exit from the speaker. 7. Only use aachments/accessories specied by the manufacturer. 8. Unplug this speaker during lightning storms or when unused for long periods of me. 9. Before connecng speakers to power source, please turn o the power switch and make sure the volume is set at minimum level. 10. Please do not place power cable and signal cable near heat source (such as electric heater and radiator). Do not leave cables where they can easily be stepped on or compressed. 11. Use electric outlets that allow power cable be pulled out easily. When speakers are not being used for an extended period of me, please turn o power switch and disconnect power plug. 12. In order to avoid damage from thunder and lightning, turn o power switch and disconnect speaker from power source during a rain storm. 13. Please do not drag power cable when disconnecng from wall socket. Hold power cord rmly at the top to unplug from the wall socket. 14. Use the speakers only within voltage specicaons. Using the speakers with voltage higher than specicaons is dangerous and can cause equipment damage, re damage or bodily injury. 15. These speakers do not include any self serviceable parts. Do not aempt to open the speaker to uninstall any parts or do any type of modicaons. If problems occur during use please contact professional technicians only for repair. 16. Please refer to the trouble shoong secon in owners manual for common operaon errors and to determine possible malfuncon. 17. Please do not place speakers in places where they can be easily hit by falling objects or dropping and splashing liquid. Do not place any lit re (such as candle) on top of speaker as this may lead to re hazard. Do not place any liquid containers on top of speaker as this may fall on speakers and causing electric shock and damage to speaker. 18. Place speakers in a stable posion so they will not easily fall o causing damage and injury. 19. Place speakers in a well venlated and dry posion, far from direct sunlight, heat source, vibraon, dust, moist or extremely cold condion. For opmal performance, please leave at least 20 cm distance space around the speaker. 20. Please do not use speaker at maximum volume for an extended period of me, This may cause damage to your hearing. 21. Before moving the speakers, please rst turn o power switch and disconnect from power source. 22. When the following symptoms occur, please turn o power switch and disconnect from power source:
Power cable or plug is worn or damaged. Abnormal odor or smoke is detected. Small objects falling inside the speaker. Sudden break o while playing music. Consult a professional repair technician to diagnose and repair the speaker. 23. Do not use chemical solvent to clean the surface of speaker. To avoid surface damage, use a clean and so cloth only. 24. Do not use the speakers in proximity closer than 22 cm to individuals wearing cardiac pacemaker or debrillator. 1 1 English Warning:
1. Use the same type of baery only to replace baery in remote control. 2. Never disassemble, smash, or compress baery inside remote control; or toss it into a re. 3. Please stop using the remote control if it has the appearance of bulging, leaking, discoloring or any other abnormal symptoms. Improper use of baery can cause explosion or leaking which leads to burn or other bodily injury. Please dispose baery by referring to local legislaon. Excessively loud music may lead to hearing loss. Please keep the volume in a safe range. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collecon systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the speakers. When a cart is used, use cauon when moving the cart/speakers combinaon to avoid injury from p-over. Power warning:
1. Place the product near the power outlet for easy use. 2. Before use, make sure that the operang voltage is the same as your local power supply. Correct operang voltage can be found on the product plate. 3. For safety purpose, unplug the product during lightning storms or when unused for extended periods of me. 4. Under normal condions, the power supply may get hot. Please keep good venlaon in the area and exercise cauon. 5. Safety warning labels on the housing or boom of the product or power adaptor. This symbol is to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure that may be of sucient magnitude to constute a risk of electric shock to persons. This symbol is to warn the user not to disassemble the enclosure of the product and there is no user-replaceable part inside. Take the product to an authorized service center for repair. This symbol indicates that the product is for indoor use only. WARNING! The unit is of Class l construcon and must be connected to a mains socket outlet with a protecve earthing connecon. Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable. For wireless product:
1. Wireless product may generate shortwave radio frequencies and interfere with the normal use of other electronic devices or medical equipment. 2. Turn o the product when its disallowed. Do not use the product in medical facilies, on airplane, at gas staons, near automac gates, automac re alarm system or other automated devices. 3. Do not use the product in the vicinity of a pacemaker within a 20cm range. The radio waves may aect the normal operaon of the pacemaker or other medical devices. 2 2 English Important safety instrucon Catalog Box Contents Speaker Illustraon Remote Control Illustraon Installing Baery in Remote Control Preparaons Connect speakers Connect to playback devices Connect to power source Speaker Placement Turn on main power Playing Play music via balanced output Play music via Line in output Play music via USB output 1. Install the special driver 2. Set this product as the audio output device of PC 3. Play music on the PC Play music via opcal/coaxial output Play music via Bluetooth Specicaons/statement Troubleshoong FCC Statement This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operaon. Any Changes or modicaons not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separaon between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC Cauon The device meets the exempon from the roune evaluaon limits in secon 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian informaon on RF exposure and compliance. This device contains licence-exempt transmier(s)/receiver(s) that comply with Innovaon, Science and Economic Development Canadas licence-exempt RSS(s). Operaon is subject to the following two condions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operaon of the device. This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body. Le disposif rencontre l'exempon des limites courantes d'valuaon dans la secon 2.5 de RSS102 et la conformit l'exposon de RSS-102 rf, ulisateurs peut obtenir l'informaon canadienne sur l'exposion et la conformit de rf. Lmeeur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovaon, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitaon est autorise aux deux condions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est suscepble den compromere le fonconne. Cet quipement doit tre install et ulis une distance minimale de 20 cm entre le radiateur et votre corps. Hereby, Edier Internaonal Limited declares that the radio equipment type A300 is in compliance with Direcve 2014/53/EU. The full text of the EU declaraon of conformity is available at the following internet address: hps://www.edier.com/int/eu-doc.html 3 English 5 6 7 8 9 9 10 10 10 11 12 13-15 13 14-15 15 16 17 18 19 4 English Box Contents Speaker Illustraon Passive speaker Acve speaker Remote control A300 ACT IVE S P E AK E R S YST E M VOLUME INP UT
B ASS T R E B LE L BALANCED IN R POWER O I OFF AC~INPUT ON L SPEAKER OUT 100-240V~50/60Hz 800mA 6 7 8 9 10 11 RCA to 3.5mm jack plug RCA audio cable Speaker connecng cable USB connecng cable Fiber opc input audio cable Power cable User manual 5 English 1. Volume control/input selecon Volume control Rotate clockwise to increase volume; rotate counter clockwise to reduce volume. When reaching maximum volume level, connue to rotate volume control will not change volume. Input selecon Press to switch between BAL AUX USB Opcal Coaxial Bluetooth modes.
(As DSP will be recongured when input mode is switched, it is recommended to press aer the current mode indicator ashes once.) Standby control Press and hold to alternate between Power on and Stand by mode. 2. Bass level adjustment Room acouscs may dictate which type of adjustment you need to make to retain the proper frequency response from the speaker. Turn from 0 to le to reduce low frequencies;
Turn from 0 to right to increase low frequencies. 3. Treble level adjustment Room acouscs may dictate which type of adjustment you need to make to retain the proper frequency response from the speaker. Turn from 0 to le to reduce high frequencies;
Turn from 0 to right to increase high frequencies. 13 12 4. Balanced input port Connect to audio source devices with balanced output using XLR cable. 5. Power switch Turn on/o speaker power. 6. AC input socket Connect to plug of power cord. 7. Auxiliary input port Connect to audio source devices with RCA output port using RCA audio cable. 8. USB B type port Connect to audio source devices with USB output port using USB connecng cable. 9. Opcal input port Connect to audio source devices with opcal output port using ber opc input audio cable. 10. Coaxial input port Connect to audio source devices with coaxial output port using coaxial cable. 11. Passive speaker connector Connect to passive speaker using speaker connecng cable. 12. Acve speaker connector Connect to acve speaker using speaker connecng cable. 13. LED indicator/remote control receiving window Indicates current input mode based on audio sources and input selecon. Note: Bass and Treble trimmers are automacally bypassed in default when system is taking signal from balanced input ports, thus to avoid changes to the input signal. 6 English Remote Control Illustraon Installing Baery in Remote Control OPT COAX Standby buon When powered on, press the buon to let the speaker enter standby mode. Displayed value of remote control receiving window on the acve speaker will disappear but internal power is sll being connected. Re-press the buon or press the VOLUME/INPUT knob on the rear panel of the acve speaker to power on the speaker again. Press the buon on the rear panel to turn on/o the main power. O Volume control buons BAL AUX USB 10 11 Mute Mute o speaker output Volume up/down Adjust playing volume Playback selecon buons Play/Pause Previous/
Next track Audio source play/pause in Bluetooth/USB mode Previous/next track in Bluetooth/USB mode Input source selecon buons OPT COAX AUX BAL USB 10 11 Opcal input mode Coaxial input mode AUX input mode Balanced input mode USB input mode
(Bluetooth) Bluetooth input mode
* When playing music in Bluetooth mode and switching to other modes, Bluetooth connecon will automacally return if selecng Bluetooth mode again.
* When playing music in USB mode and switching to other modes, PC needs to be reset for USB mode to be selected again. Please refer to Set this product as the audio output device of PC. How to operate remote control Aim remote control at the remote control receiving window The opmum operaonal distance is within 7 meters. When the system receives remote control commands, display value of display window will alert or ash. Within 7 meters 30 30 OPT COAX BAL AUX USB Install or replace remote control baery 1. As the illustraon shows, with thumb press down the slot of baery cover and slide to remove the cover 2. Place the two AAA baeries (note the + and -pole) into the remote control and close the baery cover. Note 1. The baery life is normally about 6 months; please replace it when the remote control is not sensive or the control distance to be shortened. 2. Remove the baery immediately when exhausted to avoid explosion or acid leaks. 3. Discard the baery immediately in the event of baery leakage, paying aenon not to touch the leaking materials. If leaking is in contact with skin or gets in eyes/mouth, rinse immediately and seek emergency treatment immediately. Please clean the baery compartment thoroughly prior to installing new baery. 4. Never use the remote control in condions below:
Places with high humidity, e.g. a bathroom Places with high temperature, e.g. near a heater or stove Places with extremely low temperature In dusty places 5. Never swallow the baeries in case of chemical burning risk. 6. Never mix old and new baeries. This will shorten new baery life or cause old baery leakage. 7. Remove the baery when unused for a long period of me to avoid baery leakage. 8. Never use this product when baery compartment is not securely closed, and keep the remote control away from children. Never let children touch the baery. 9. If the baery is accidentally swallowed, rush to hospital immediately. 10. Danger of explosion if baery is incorrectly replaced. Replace only with the same or equivalent 11. The baery should not be exposed to excessive heat such as direct sun, re or similar. 7 English 8 English Preparaons 1.Connect speakers A300 ACT IVE S P E AK E R S YST E M O I L SPEAKER OUT LEFT SPEAKER Use the speaker connecng cable included for connecon Preparaons 3.Connect to power source Connect the power cable included to power input port on the rear panel, and then insert power plug into wall outlet. 4.Speaker placement Passive speaker Acve speaker 2. Connect to playback devices RCA audio cable CD player CD player/music player/PC USB cable PC or Mac A300 ACT IVE S P E AK E R S YST E M VOLUME INP UT
B ASS T R E B LE A300 ACT IVE S P E AK E R S YST E M XLR cable Fiber opc input audio cable O I Coaxial cable CD player CD player
/ decoder TV/CD player
/ Blu-ray player L BALANCED IN 5.Turn on main power R Power L SPEAKER OUT O POWER O I OFF ON AC~INPUT 100-240V~50/60Hz 800mA 9 English A300 ACT IVE S P E AK E R S YST E M O I
* Place the passive and acve speaker on a solid, leveled and steady surface. For the opmum sound posioning and layering, using the special stands of A300 is recommended.
* For the opmum stereo sound eect, the listener can slightly adjust speaker angel.
* For the most accurate sound and balance, the listener should be in the axis of equilateral triangle formed by the acve and passive speakers.
* High frequency has a much higher direcvity, and for more accurate sound eect the speaker's tweeter should be at ear level of the listener.
* Aer all cables are connected securely, press power switch on the rear panel to turn on main power;
* Press the on the remote control to turn o power source or switch to standby state;
* LED indicator will be lit to show current audio mode, please select the correct audio source with the corresponding connecon. 10 English Balanced Input Mode AUX Input Mode 1. Connect to audio source devices with balanced output using XLR cable. CD player CD player/decoder. A300 ACT IVE S P E AK E R S YST E M O I 2. Press the BAL buon on the remote control or press the VOLUME / INPUT buon on the rear panel of the acve speaker to select BAL input mode, LED indicator on the acve speaker will display BAL. OPT COAX Or BAL AUX USB VOLUME INP UT
VOLUME INP UT
BAL 3. Play music on the connected device, press the +/- buon on the remote control or press the VOLUME / INPUT buon on the rear panel of the acve speaker to adjust volume to a desired level. OPT COAX Or BAL AUX USB VOLUME INP UT
VOLUME INP UT
* XLR type interface is widely used in professional audio equipments, XLR interface of A300 can be connected to playing devices with balanced output port.
* Balanced connecon can eecvely cancel external noise, support long-distance line transmission, and reduce noise picked up during transmission.
* There is no XLR cable aached in the package, and the users need to buy it on their own. 11 English 1. Insert RCA audio cable into AUX input port on the rear panel of the acve speaker
(pay aenon to L/R connector matching); then connect RCA audio cable to audio source devices with RCA output port (CD player/audio decoder/PC/music player/
mobile phone). A300 ACT IVE S P E AK E R S YST E M O I L R AUX CD player Audio decoder/PC/music player, etc 2. Press the AUX buon on the remote control or press the VOLUME / INPUT buon on the rear panel of the acve speaker to select AUX input mode, LED indicator on the acve speaker will display AUX. OPT COAX Or BAL AUX USB VOLUME INP UT
VOLUME INP UT
AUX 3. Play music on the connected device, press the +/- buon on the remote control or press the VOLUME / INPUT buon on the rear panel of the acve speaker to adjust volume to a desired level. OPT COAX BAL AUX USB Or VOLUME INP UT
VOLUME INP UT
When connecng to audio source devices with 3.5mm headphone jack, user can use the adapter plug for transferring output. 12 English USB Input Mode USB Input Mode USB interface chip in the A300 is a XMOS chip commonly used by high-end audio equipments. Aer being connected to PC, USB interface will directly extract and play back digital audio signal in a manner similar to the USB external sound card, to avoid sound degradaon and dynamic range compression caused by digital-to-analog conversion of PC sound card, and to ensure the restoraon of original sound quality. Connect PC to speakers Connect Windows PC already installed with USB driver or Apple Mac to the speakers using USB connecng cable. A300 ACT IVE S P E AK E R S YST E M O I USB connecng cable
(B type) USB A300 ACT IVE S P E AK E R S YST E M O I USB
* PCM audio signals (44.1KHz/48KHz/96KHz/192KHz) only funcons in USB mode.
* If connecng the speakers to a PC, driver program must be installed rst for system to perform properly.
* USB driver in Mac operang system supports USB Audio Class 1 and Class 2 audio transmission by default, therefore driver program installaon is not needed. Install the special driver program (only for Windows) Please install the special driver program on the PC before connecng the PC to this product. 1. Download and extract the special driver program A300 USB Driver in the following website:
hp://www.airpulseaudio.com/en/product/a300 2. Install the driver program A300 USB Driver on the PC. Please refer to the download page or the following link for driver program details:
hps://www.xmos.com/support/usb-audio-driver-support 3. Aer installaon is complete, exit from all applicaons. 13 English Set this product as the audio output device of PC 1. Press the USB buon on the remote control or press the VOLUME / INPUT buon on the rear panel of the acve speaker to select USB input mode, LED indicator on the acve speaker will display USB. OPT COAX Or BAL AUX USB VOLUME INP UT
VOLUME INP UT
USB 2. Set this product as the audio output device of PC For Windows users, please open Control panel Sound Play Set as Default Tab to set XMOS USB Audio as the current audio output device. Sound Play Record Sound Communication Select the follow player to change setting Speaker 2-XMOS USB Audio Default device Configuration Set as Default Properties Confirm Cancel Apply 14 English USB Input Mode Opcal or coaxial Input Mode For Mac users, please open System Preferences Sound OutputTab to select AIRPULSE A300as the current audio output device. 1. Connect this product to audio source device with opcal or coaxial digital output port using ber opc input audio cable or coaxial cable. AIRPULSE A300 A300 ACT IVE S P E AK E R S YST E M O I OPT COAX 2. Press the OPTorCOAX buon on the remote control or press the VOLUME / INPUT buon on the rear panel of the acve speaker to select opcal or coaxial input mode, LED indicator on the acve speaker will display OPT or COAX. TV/CD player/
Blu-ray player, etc. OPT COAX OPT or COAX Play music on the PC 1. Play music on the connected device, press the +/- buon on the remote control or press the VOLUME / INPUT buon on the rear panel of the acve speaker to adjust volume to a desired level. OPT COAX Or BAL AUX USB VOLUME INP UT
VOLUME INP UT
BAL AUX USB Or VOLUME INP UT
VOLUME INP UT
OPT COAX Or 2. In USB mode, press the buon on the remote control to skip to previous / next track, and press the buon to pause/play songs. 3. Play music on the connected device, press the +/- buon on the remote control or press the VOLUME / INPUT buon on the rear panel of the acve speaker to adjust volume to a desired level.
* The play control under USB input belongs to USB HID control. This control needs support of player soware,and so there may be compability dierences for dierent audio player soware.
* USB driver in Mac operang system supports USB Audio Class 1 and Class 2 audio transmission by default, therefore driver program installtaion is not needed.
* Windows 7/ windows 10 operang system have self USB driver, only support USB Audio Class 1 type USB audio transmission (only support 2 channel audio signal, the highest sampling rate is 96KHz), The USB connecng chip of A300 uses USB Audio Class 2 type audio transmission to support 192KHz audio signal, so for Windows 7/ windows 10 operang system users, using the A300 speaker needs to download the special driver program.
* When USB input is disconnected or in other modes, please reset on the PC to re-select USB input. Please see Set this device as the audio output device of PC for details
* As Microso Company had stopped maintaining the XP system, we cant provide the driver program with Microso digital signed.
* If you need to buy USB A type to B type connecng cable, you can search and buy it on the various e-commerce plaorms. 15 English OPT COAX BAL AUX USB Or VOLUME INP UT
VOLUME INP UT
* Only the standard PCM audio signals (44.1KHz/48KHz/96KHz/192KHz) funcon in opcal or coaxial mode.
* IIf the opcal digital output of playing device is ACC, such as on a TV, please switch it to PCM. 16 English Bluetooth Input Mode Specicaons/statement 1. Press the buon on the remote control or press the VOLUME / INPUT buon on the rear panel of the acve speaker to select Bluetooth input mode, LED indicator on the acve speaker will display . OPT COAX Or BAL AUX USB VOLUME INP UT
VOLUME I NP UT
2. Set your Bluetooth device to search for and connect to AIRPULSE A300; pin code for connecon is 0000 if needed. Operaons may be dierent between dierent devices, please refer to the operaonal instrucons aached with the devices. Bluetooth AIRPULSE A300 3. Play music on the connected Bluetooth device, press the +/- buon on the remote control or press the VOLUME / INPUT buon on the rear panel of the acve speaker to adjust volume to a desired level. OPT COAX BAL AUX USB Or VOLUME INP UT
VOLUME I NP UT
4. In Bluetooth mode, press the buon on the remote control can skip to previous/next track, and press the buon to pause/play songs.
* Eecve Bluetooth connecon distance is within 10 meters.
* The Bluetooth of A300 can only be searched and connected in Bluetooth input. The exisng Bluetooth connecon will be disconnected once the speaker is switched into other audio inputs. When switched to Bluetooth input, the speaker will try to connect to the Bluetooth device connected last me.
* To disconnect Bluetooth, press and hold the buon on the remote control for above 2 seconds.
* To enjoy all Bluetooth funcons please ensure your audio device has A2DP and AVRCP proles.
* When connected to this product, Bluetooth connecvity and funcons may be dierent between dierent Bluetooth devices,depending on soware sengs of Bluetooth devices . 17 English Tweeter: Horn Loaded Ribbon Tweeter Mid-Woofer: 6.5inch Aluminum Cone Underhung Design Neodymium Power Mid-Woofer Amplier System: Digital Amplier with Xmos Processor Power Output: L/R (Treble):10W+10W, L/R (Woofer): 70W+70W Frequency Range: 40Hz-40KHz Signal-Noise Rao: L/R90dB(A) Input Mode: AUX, Balance Input, USB, Opcal, Coaxial, Bluetooth. The USB, Opcal and Coaxial inputs support up to 192KHz input sample rate Input Sensivity: AUX: 70050mV, Balance: 115050mV, USB: 55050mFFs, Opcal: 50050mFFs Coaxial: 50050mFFs, Bluetooth: 50050mFFs Mains Voltage: 100-240V AC 50/60Hz Cabinet Size (WxHxD): 225 x 385 x 340 (mm) Net Weight: 24 Kg (53 Pounds) / Set NOTICE: For the need of technical improvement and system upgrade, informaon contained herein may be subject to change from me to me without prior noce. Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies Internaonal, Ltd., registered in the United States and other countries. 18 English Troubleshoong Instrucons de scurit importantes Problem Soluon No sound Cannot connect via Bluetooth Check if the power indicator light is ON Try to turn up the volume using either the master volume control or remote control. Ensure the audio cables are rmly connected and the input is set correctly on the speakers. Check if there is signal output from the audio source. Make sure the speaker is switched to Bluetooth input, in other audio input mode Bluetooth can not be paired or connected. Disconnect from any Bluetooth device by pressing and holding the volume dial in Bluetooth mode, and then try again. Eecve Bluetooth transmission range is 10 meters, please make sure operaon is within the range. Try another Bluetooth device for connecon. The A300 does not turn on Check if mains power is connected -or if the wall outlet is switched on. If you want to nd out more about AIRPULSE, please visit our website at www.airpulseaudio.com 19 English Lisez le contenu suivant avec aenon avant d'allumer votre quipement. Respectez les instrucons ci-dessous. Conservez ces informaons pour rfrence future. 1. Lisez toutes ces instrucons avec aenon. Conservez-les avec soin pour rfrence future 2. Respecter tous les averssements. 3. Suivez toutes les instrucons. 4. Ne pas installer prs d'une source de chaleur telle qu'un radiateur, une cuisinire ou tout autre appareil (y compris un amplicateur) qui produit de la chaleur. 5. N'essayez pas de contourner les caractrisques de scurit d'une prise polarise ou d'une mise la terre. Une che polarise possde deux lames dont l'une est plus large que l'autre. Une prise avec mise la terre possde deux lames et une troisime pince de mise la terre. La large lame ou troisime broche sont l pour votre scurit. Si la prise fournie ne peut tre insre dans votre prise murale, contactez un lectricien pour faire remplacer la prise obsolte. 6. Ne placez pas le cordon d'alimentaon l o il risque d'tre cras ou pli, principalement prs des prises, des rceptacles ou au niveau du point de sore de l'quipement. 7. N'ulisez que des accessoires ou des aachements cers par le fabriquant. 8. Dbranchez cet appareil durant les orages ou lorsqu'il est inulis pendant une longue priode. 9. Avant de connecter les enceintes l'alimentaon, teignez l'interrupteur marche/arrt et assurez-vous que volume est rgl sur le minimum. 10. Ne placez pas le cordon d'alimentaon ni les cbles de signal proximit d'une source de chaleur (comme un chauage lectrique et un radiateur). Le faites pas passer les cbles l o on risque de marcher dessus ou de les craser. 11. Branchez l'appareil sur une prise murale facile d'accs. Lorsque les enceintes ne sont pas ulises pendant une priode prolonge, teignez l'interrupteur marche/arrt et dbranchez le cordon d'alimentaon. 12. Pour viter les risques de dommages entrans par l'orage et la foudre, teignez l'interrupteur marche/arrt et dbranchez l'appareil de la prise murale pendant une tempte. 13. Ne pas rer sur le cordon d'alimentaon pour le dbrancher de la prise murale. Tenez la che du cordon d'alimentaon pour le dbrancher de la prise murale. 14. N'uliser les enceintes que sur une source d'alimentaon au voltage correct. Uliser les enceintes sur un voltage suprieur que les caractrisques correctes est dangereux et peut entraner des dommages l'quipement, un incendie ou des blessures corporelles. 15. Ces enceintes ne comportent aucune pice remplaable par l'ulisateur. Ne pas tenter d'ouvrir le haut-parleur pour en rerer une pice ou y apporter une quelconque modicaon. En cas de problme, prenez contact avec des techniciens professionnels pour y eectuer des rparaons. 16. Consultez la secon de dpannage dans le manuel du propritaire pour en savoir plus sur les problmes courants et en dterminer l'origine probable. 17. N'installez pas les enceintes dans des lieux de risque possible d'objet, ni proximit d'une source d'eau risquant de l'clabousser. Ne pas poser de source de amme vive (par ex. une bougie) sur l'enceinte, sous risque d'incendie. Ne pas poser de conteneur de liquide sur le dessus de l'enceinte, car ce dernier pourrait tomber et causer un court-circuit et endommager l'enceinte. 18. Posionnez les enceintes sur un emplacement stable depuis lequel elles ne risquent pas de tomber, causant des dommages et des blessures. 19. Posionnez les enceintes dans un lieu correctement venl, hors de la lumire directe du soleil, d'une source de chaleur, de vibraons, de poussire, d'humidit, ou de tempratures extrmement basses. Pour garanr des performances opmales, mnagez un espace libre de 20 cm sur tout le pourtour de l'enceinte. 20. Ne pas uliser l'enceinte volume maximum pendant une dure prolonge, car cela peut entraner des lsions audives. 21. Avant de dplacer les enceintes, teignez-les au niveau de l'interrupteur marche/arrt et dbranch-ez-les de la prise murale. 22. Dans l'une des situaons suivantes, teignez au niveau de l'interrupteur marche/arrt et dbranchez de la prise murale :
Le cble d'alimentaon ou la che est us ou endommag. Odeur anormale ou fume. Un pet objet est tomb dans l'enceinte. La diusion de la musique se coupe brutalement. Prenez contact avec un technicien quali pour inspecter et rparer l'enceinte. 23. Ne pas uliser de solvant chimique pour neoyer la surface de l'enceinte. Pour viter les dommages la surface, ulisez un chion doux et propre seulement. 24. Ne pas uliser les enceintes une distance infrieure 22 cenmtres d'une personne portant un smulateur cardiaque ou un dbrillateur. 20 Franais Instrucons de scurit importantes Instrucons de scurit importantes Les produits sans ls:
1. Les produits sans ls peuvent mere des frquences radio suscepbles d'interfrer avec le bon fonconnement normal des appareils lectroniques et des quipements mdicaux. 2. teignez le produit lorsque cela est requis. Ne pas uliser le produit dans des centres mdicaux, bord d'un avion, dans les staons-service, proximit d'un portail automaque, d'une alarme incendie ou de tout autre appareil automas. 3. Ne pas approcher le produit moins de 20 cenmtres d'un smulateur cardiaque. Les ondes radio peuvent interfrer avec le fonconnement normal du smulateur ou d'autres quipements mdicaux. Averssement:
1. Ne remplacez la pile que par une pile du mme type pour remplacer la pile de la tlcommande. 2. Ne jamais dmonter, frapper, ou craser la pile dans la tlcommande, ni la jeter au feu. 3. Cessez d'uliser la tlcommande si elle semble gone, fuir, se dcolorer ou tout autre anormalit. Une ulisaon incorrecte de la pile peut entraner une explosion ou une fuite qui peut entraner des brlures ou d'autres blessures corporelles. liminez la pile dans le respect de la lgislaon locale. L'coute de musique volume extrme de manire prolonge peut aecter l'audion de l'ulisateur. Veillez rgler le volume un niveau adquat. liminaon correcte de ce produit. Ce symbole avise quen Europe, ce produit ne doit pas tre limin avec les autres dchets mnagers.Recyclez-le de manire responsable pour promouvoir la rulisaon durable des ressources matrielles et viter tout risque pour lenvironnement ou la sant rsultant dune liminaon non contrle des dchets. Pour retourner le produit usag, ulisez les points de retour et de collecte ou contactez le vendeur du produit qui peut prendre en charge ce produit pour un recyclage respectueux de lenvironnement. Nuliser quavec le panier, le support, le trpied, le crochet ou la table spuls par le fabricant ou vendus avec lappareil. Faire aenon lors du dplacement dun panier/appareil combin an dviter des blessures en cas de renversement si un panier est ulis. Averssement sur l'alimentaon lectrique:
1. Placez le produit proximit de la prise lectrique pour une ulisaon facile. 2. Avant ulisaon, assurez-vous que le voltage dlivr par la prise murale soit bien compable avec le produit. Vous pouvez consulter les informaons de voltage sur l'quee prsente sur le produit. 3. Pour des raisons de scurit, dbranchez l'appareil pendant les orages ou lors des priodes d'inulisaon prolonges. 4. L'alimentaon peut chauer en cours d'ulisaon normale. Veillez ce que le lieu d'ulisaon soit correctement venl et surveillez le produit. 5. quees d'averssement apposes sur le boer ou au-dessous du produit ou de l'adaptateur secteur. Ce symbole indique l'ulisateur la prsence de voltage dangereux non isol l'intrieur de l'appareil, qui pourrait tre susant pour constuer un risque d'lectrocuon. Ce symbole est prsent pour indiquer que le produit ne doit pas tre ouvert et qu'il ne conent aucun composant remplaable par l'ulisateur. En cas de besoin de rparaon, apportez le produit au centre de service agr. Ce symbole indique que le produit doit tre ulis uniquement en intrieur. AVERTISSEMENT ! Cee unit est un appareil de classe l, qui doit tre branch une prise murale quipe d'une che de mise la terre de scurit. La prise d'alimentaon doit pouvoir tout moment tre facilement dbranche. 21 Franais 22 Franais Sommaire Contenu de la bote Contenu de la bote Descripon de l'enceinte Descripon de la tlcommande Installaon de la pile dans la tlcommande Prparafs Connexion des enceintes Connexion du disposif de lecture Branchement l'alimentaon Posionnement des enceintes TMise en marche Lecture Jouer la musique via sore en balance Jouer la musique via Entre Ligne Jouer la musique via USB 1. Installaon du pilote spcial 2. Uliser ce produit comme disposif audio d'un PC 3. Jouer la musique sur le PC Jouer la musique via sore opque/coaxiale Jouer la musique via Bluetooth Caractrisques techniques/Informaons supplmentaires Dpannage 24 25 26 27 28 28 29 29 29 30 31 32-34 32 33-34 34 35 36 37 38 Haut-parleur passif Haut-parleur acf Tlcommande Cble audio RCA Prise jack RCA vers 3,5 mm Cble de raccordement du haut-parleur Cble de connexion USB Cble dentre en bre opque Cble d'alimentaon Mode demploi 23 Franais 24 Franais Descripon de l'enceinte Descripon de la tlcommande A300 ACT IVE S P E AK E R S YST E M VOLUME INP UT
B ASS T R E B LE L BALANCED IN R POWER O I OFF AC~INPUT ON L SPEAKER OUT 100-240V~50/60Hz 800mA 6 7 8 9 10 11 OPT COAX BAL AUX USB 10 11 1. Contrle du volume principal/slecon de source Contrle du volume Faire tourner dans le sens des aiguilles d'une montre pour augmenter le volume, faire tourner dans le sens inverse des aiguilles d'une montre pour rduire le volume. Une fois le volume maximum aeint, la molee de contrle du volume n'a plus d'eet. Slecon de source Appuyez pour basculer entre les modes BAL AUXUSBOpcalCoaxialBluetooth.
(Le DSP est recongur aprs la slecon du mode source, il est donc recommand d'appuyer aprs que l'indicateur du mode actuel clignote une fois.) Contrle du mode veille Maintenez appuy pour basculer entre les modes Marche et Veille. 2. Rglage du niveau de basses L'acousque de la salle o vous-vous tenez dtermine le rglage ncessaire pour garanr une rponse en frquence correcte du haut-parleur. Faites tourner de 0 vers la gauche pour rduire le niveau des basses frquences ; Faites tourner de 0 vers la droite pour augmenter le niveau des basses frquences. 3. Rglage du niveau des aigus L'acousque de la salle o vous-vous tenez dtermine le rglage ncessaire pour garanr une rponse en frquence correcte du haut-parleur. Faites tourner de 0 vers la gauche pour rduire le niveau des hautes frquences ; Faites tourner de 0 vers la droite pour augmenter le niveau des hautes frquences. Remarque: Les rglages de basse et des aigus sont automaquement ignors lorsque le systme reoit le signal depuis des ports de source en balance, pour viter les modicaons du signal d'entre. 12 13 4. Port dentre en balance Pour connecter un disposif de source audio avec sore en balance l'aide du cble XLR. 5. Interrupteur marche/arrt Pour acver ou dsacver l'alimentaon 6. Port d'alimentaon secteur Pour connecter le cordon d'alimentaon. 7. Port dentre Auxiliaire Pour connecter des disposifs audio source quips d'une sore RCA l'aide d'un cble audio RCA. 8. Port USB type B Pour connecter des disposifs audio source quips d'une sore USB l'aide d'un cble USB. 9. Port d'entre opque Pour connecter des disposifs audio source quips d'une sore opque l'aide d'un cble audio en bre opque. 10. Port dentre coaxiale Pour connecter des disposifs audio source quips d'une sore coaxiale l'aide d'un cble coaxial. 11. Connecteur pour enceinte passive Pour connecter une enceinte passive avec le cble adapt. 12. Connecteur d'enceinte acve Pour connecter une enceinte acve avec le cble adapt. 13. Indicateur DEL/Fentre de rcepon de la tlcommande Indique le mode source actuel selon les sources audio et l'entre sleconne. 25 Franais Bouton Veille Lorsqu'allum, appuyez sur le bouton pour faire passer l'enceinte en mode veille. La valeur achepar la fentre de rcepon de la tlcommande sur l'enceinte acve disparat, mais le systme est toujours aliment. Appuyez de nouveau sur le bouton ou appuyez sur la molee VOLUME/INPUT sur le panneau arrire de l'enceinte acve pour alimenter l'enceinte de nouveau. Appuyez sur le bouton sur le panneau arrire pour acver ou O Boutons de slecon de source Muet augmentaon et rducon du volume Pour couper le son du haut-parleur Pour rgler le volume en lecture Boutons de slecon de lecture Lecture/pause Lecture/pause depuis la source en mode Bluetooth/USB Piste prcdente
/suivante Piste prcdente/suivante en mode Bluetooth/USB Boutons de slecon de source OPT COAX AUX BAL USB 10 11
(Bluetooth) Mode source opque Mode source coaxiale Mode source AUX Mode source en balance Mode source USB Mode source Bluetooth
* Lorsque vous jouez de la musique en mode Bluetooth, et que vous basculez sur d'autres modes, la connexion Bluetooth sera automaquement rtablie lorsque le mode Bluetooth est nouveau sleconn.
* Lorsque vous jouez de la musique en mode USB et que vous basculez sur d'autres modes, le PC doit tre redmarr pour que le mode USB fonconne de nouveau. Consultez Uliser ce produit comme disposif audio d'un PC . Mode d'emploi de la tlcommande Orientez la tlcommande vers la fentre de rcepon. La distance opmum de la tlcommande est de 7 mtres. Lorsque le systme reoit une commande depuis la tlcommande, il ache une valeur sur l'acheur ou met un clignotement. moins de 7 mtres 30 30 OPT COAX BAL AUX USB 26 Franais Installaon de la pile dans la tlcommande Installer/remplacer les piles de la tlcommande 1. Comme illustr, appuyez sur l'onglet du cache du comparment piles avec le pouce, et faites-le glisser pour le rerer. Prparafsons 1. Connexion des enceintes 2. Placez deux piles AAA (en prenant note des ples + et - ) dans la tlcommande, et refermez le cache du comparment piles. A300 ACT IVE S P E AK E R S YST E M O I L SPEAKER OUT LEFT SPEAKER Ulisez le cble de connexion d'enceinte inclus pour eectuer les connexions. Remarque:
1. L'autonomie des piles est habituellement d'environ 6 mois. Remplacez-les lorsque la tlcommande n'a plus d'eet, ou que vous devez vous rapprocher du systme. 2. Rerez les piles immdiatement lorsqu'elles sont vides, pour viter les risques d'explosion ou de fuite d'acide. 3. Jetez les piles immdiatement en cas de fuite de liquide, en veillant ne pas toucher le liquide. Si du liquide de pile entre en contact avec la peau ou avec les yeux, ou est ingr, rincez immdiatement et prenez contact avec un mdecin. Neoyez le comparment des piles avec soin avant d'installer de nouvelles piles. 4. N'ulisez jamais la tlcommande dans les situaons suivantes :
Dans un lieu haut en humidit, par ex. une salle de bains Dans un lieu trs chaud, par ex. proximit d'un chauage ou d'un pole Dans un lieu o la temprature est extrmement basse Dans les lieux poussireux 5. Ne jamais avaler une pile, sous risque de brlure chimique. 6. Ne jamais mlanger les piles neuves et uses. Cela rduira la dure de vie de la nouvelle pile, ou causer une fuite de la pile use. 7. Rerer les piles avant une priode d'inulisaon prolonge, pour viter les risques de fuite de liquide de pile. 8. Ne jamais uliser ce produit lorsque le comparment piles n'est pas correctement ferm, et ne pas laisser la tlcommande porte des enfants. Ne jamais laisser les enfants toucher une pile. 9. Si une pile est ingre par accident, rendez-vous l'hpital aussi vite que possible. 10. Risque d'explosion si la pile est remplace de faon incorrecte. Ne remplacez une pile que par une pile du mme type ou de type quivalent 11. Ne pas exposer la pile une temprature excessive, comme la lumire directe du Soleil, un feu ou similaire. 27 Franais 2. Connexion du disposif de lecture CD player Lecteur de CD/lecteur de musique
/PC, etc. Cble audio RCA Cble de connexion USB PC or Mac Cble XLR A300 ACT IVE S P E AK E R S YST E M Cble dentre en bre opque O I Cble coaxiale CD player Lecteur de CD/
dcodeur audio, etc TV/Lecteur de CD
/DVD Blu-ray, etc. 28 Franais Prparafs Mode source en balance 1. Connectez un disposif de source audio avec sore en balance l'aide du cble XLR A300 ACT IVE S P E AK E R S YST E M O I CD player Lecteur CD/dcodeur A300 ACT IVE S P E AK E R S YST E M O I 3.Branchement l'alimentaon Connectez le cordon d'alimentaon inclus au port d'alimentaon situ sur le panneau arrire, puis branchez-en l'autre extrmit une prise murale. 4.Posionnement des enceintes Haut-parleur passif Haut-parleur acf A300 ACT IVE S P E AK E R S YST E M VOLUME INP UT
B ASS T R E B LE L BALANCED IN 5.Mise en marche R
* Placez les enceintes acves et passives sur une surface solide et plane. Pour un posionnement et une organisaon sonore opmale, ulisez les socles spciquement conus pour le systme A300.
* Pour obtenir le meilleur eet stro possible, lauditeur peut rorienter lgrement l'angle des enceintes.
* Pour obtenir le son le plus prcis et la meilleure balance, l'auditeur doit se trouver sur l'axe d'un triangle quilatral form par les enceintes acves et passives.
* Les hautes frquences sont bien plus direconnelles, et pour garanr une coute prcise, le tweeter devrait tre posionn au niveau des oreilles de l'auditeur. Power L SPEAKER OUT O POWER O I OFF ON AC~INPUT 100-240V~50/60Hz 800mA
* Une fois tous les cbles correctement connects, appuyez sur l'interrupteur principal sur le panneau arrire pour acver l'alimentaon principale.
* Appuyez sur le bouton sur la tlcommande pour mere l'enceinte en veille.
* L'indicateur DEL s'illumine pour indiquer le mode audio actuel. Sleconnez la source audio correcte selon la connexion correspondante. 29 Franais 2. Appuyez sur le bouton BAL de la tlcommande ou appuyez sur le bouton VOLUME / INPUT sur le panneau arrire pour sleconner le mode source BAL. L'indicateur DEL sur l'enceinte acve ache BAL . OPT COAX BAL AUX USB ou VOLUME INP UT
VOLUME INP UT
BAL 3. Lisez la musique sur le disposif connect, et appuyez sur le bouton +/- sur la tlcommande ou appuyez sur le bouton VOLUME / INPUT sur le panneau arrire de l'enceinte acve pour rgler le volume au niveau dsir. OPT COAX ou BAL AUX USB VOLUME INP UT
VOLUME INP UT
* L'interface de type XLR est communment ulise dans les quipements audio professionnels. L'interface XLR du systme A300 peut recevoir le signal depuis des disposifs quips de ports en balance.
* La connexion en balance peut ecacement annuler le bruit externe, prend en charge les transmissions sur de longs cbles et rduit le bruit parasite reu pendant son acheminement.
* Aucun cble XLR n'est inclus dans la bote, l'ulisateur doit donc en acqurir un sparment. 30 Franais Mode source AUX Mode source USB 1. Branchez un cble audio RCA au port d'entre AUX sur le panneau arrire de l'enceinte acve (veillez faire correspondre les couleurs des ches avec celles des ports). Branchez ensuite le cble audio RCA des disposifs de source audio quips de ports RCA (lecteur CD/dcodeur audio/PC/lecteur audio/tlphone mobile). La puce d'interface USB ulise dans le systme A300 est une puce XMOS communment ulise par les quipements audio haut de gamme. Aprs connexion un PC, l'interface USB extrait et lit directement le signal audio numrique et le lit comme s'il s'agissait d'une carte son USB externe . Pour viter la dgradaon et la compression de la plage dynamique cause par la conversion du numrique vers analogique d'une carte son PC, et pour garanr la retranscripon correcte de la qualit du son d'origine. A300 ACT IVE S P E AK E R S YST E M O I L R AUX CD player dcodeur audio /PC/
lecteur de musique, etc 2. Appuyez sur le bouton AUX de la tlcommande ou appuyez sur le bouton VOLUME / INPUT sur le panneau arrire pour sleconner le mode source AUX. L'indicateur DEL sur l'enceinte acve ache AUX . OPT COAX BAL ou VOLUME INP UT
VOLUME INP UT
AUX AUX USB 3. Lisez la musique sur le disposif connect, et appuyez sur le bouton +/- sur la tlcommande ou appuyez sur le bouton VOLUME / INPUT sur le panneau arrire de l'enceinte acve pour rgler le volume au niveau dsir. OPT COAX ou BAL AUX USB A300 ACT IVE S P E AK E R S YST E M O I Cble de connexion USB
(Type B) USB
* Les signaux audio PCM (44,1 KHz/48 KHz/96 KHz/192 KHz) ne sont pris en charge que sous le mode USB.
* Si vous connectez les enceintes un PC, un pilote doit d'abord tre install pour que le systme puisse fonconner correctement.
* Le pilote USB pour systme d'exploitaon Mac prends en charge l'audio USB avec transmission de Class 1 et Class 2 par dfaut, et il n'est donc pas requis d'installer de pilote supplmentaire. Installaon du pilote spcial (pour Windows seulement) Installez le pilote spcial sur votre PC avant de connecter le PC ce produit. 1. Tlchargez et extrayez le pilote spcial A300 USB Driver depuis l'adresse suivante :
hp://www.airpulseaudio.com/en/product/a300 2. Installez le pilote A300 USB Driver sur le PC. Consultez la page de tlchargement ou le lien suivant pour obtenir les dtails sur le pilote :
hps://www.xmos.com/support/usb-audio-driver-support VOLUME INP UT
VOLUME INP UT
3. Une fois l'installaon termine, quiez toutes les applicaons. Lorsque vous connectez un disposif source quip d'une prise jack pour casque de 3,5 mm, l'ulisateur peut uliser l'adaptateur inclus pour transfrer le signal. 31 Franais 32 Franais Mode source USB Connexion d'un PC aux enceintes Connectez le PC Windows sur lequel vous avez install le pilote USB ou un ordinateur Mac Apple l'enceinte l'aide du cble de connexion USB. Mode source USB Si vous tes un ulisateur Mac, ouvrez System Preferences Sound onglet Output pour sleconner AIRPULSE A300 comme priphrique de lecture actuel. AIRPULSE A300 A300 ACT IVE S P E AK E R S YST E M O I USB Uliser ce produit comme disposif audio d'un PC 1. Appuyez sur le bouton USB de la tlcommande ou appuyez sur le bouton VOLUME / INPUT sur le panneau arrire pour sleconner le mode source USB. L'indicateur DEL sur l'enceinte acve ache USB . Jouer la musique sur le PC 1. Lisez la musique sur le disposif connect, et appuyez sur le bouton +/- sur la tlcommande ou appuyez sur le bouton VOLUME / INPUT sur le panneau arrire de l'enceinte acve pour rgler le volume au niveau dsir. OPT COAX ou BAL AUX USB VOLUME INP UT
VOLUME INP UT
USB 2. Uliser ce produit comme disposif audio d'un PC Si vous tes un ulisateur Windows, ouvrez Control panel Sound Play onglet Set as Default pour dnir XMOS USB Audio comme priphrique de lecture actuel. Sound Play Record Sound Communication Select the follow player to change setting Speaker 2-XMOS USB Audio Default device Configuration Set as Default Properties Confirm Cancel Apply 33 Franais OPT COAX ou BAL AUX USB VOLUME INP UT
VOLUME INP UT
2. En mode USB, appuyez sur le bouton sur la tlcommande pour couter la piste prcdente/suivante, et appuyez sur le bouton pour lecture/pause.
* Le contrle de lecture via entre USB ulise le systme USB HID, ce contrle doit prendre en charge le logiciel de lecture, et le niveau de compabilit peut varier selon les logiciels de lecture.
* Le pilote USB pour systme d'exploitaon Mac prends en charge l'audio USB avec transmission de Class 1 et Class 2 par dfaut, et il n'est donc pas requis d'installer de pilote supplmentaire.
* Les systmes d'exploitaon Windows 7/Windows 10 ayant des pilotes USB, ne reconnaissent que la transmission audio USB de classe I de type USB (reconnaissent uniquement le signal audio de 2 canaux, le dbit d'chanllonnage le plus lev est 96 kHz), La puce de connexion USB de A300 reconnat la transmission audio de classe 2 de type d'USB, $le signal audio de 192 kHz doit tre pris en charge, pour uliser le haut-parleur A300 besoin de tlcharger le programme pilote spcial.
* Lorsque le cble USB est dbranch ou qu'un mode dirent est sleconn, rinialisez l'ordinateur pour pouvoir sleconner la source USB de nouveau. Consultez Uliser ce produit comme disposif audio d'un PC pour en savoir plus.
* Comme Microso Company avait cess de maintenir le systme XP, nous ne pouvons pas fournir le programme pilote avec Microso Digital sign.
* Si vous avez besoin d'un cble de connexion USB A vers USB B, vous pouvez rechercher et en trouver sur direntes plateformes de commerce en ligne. 34 Franais Modes source opque ou coaxiale 1. Pour connecter ce produit des disposifs audio source quips d'une sore opque ou coaxiale l'aide d'un cble audio ou coaxial en bre opque. Mode source Bluetooth 1. Appuyez sur le bouton de la tlcommande ou appuyez sur le bouton VOLUME
/ INPUT sur le panneau arrire pour sleconner le mode source Bluetooth. L'indicateur DEL sur l'enceinte acve ache . A300 ACT IVE S P E AK E R S YST E M O I OPT COAX OPT COAX BAL ou AUX USB VOLUME INP UT
VOLUME I NP UT
2. Appuyez sur le bouton OPT ou COAX de la tlcommande ou appuyez sur le bouton VOLUME / INPUT sur le panneau arrire pour sleconner le mode source opque
/coaxiale. L'indicateur DEL sur l'enceinte acve ache OPT ou COAX. TV/ Lecteur de CD
/ DVD Blu-ray, etc. OPT COAX OPT ou COAX 2. Acvez le Bluetooth sur votre disposif source (tlphone mobile, tablee etc.) pour rechercher et sleconner AIRPULSE A300 ; Le code PIN pour la connexion est 0000 si ncessaire.L'ulisaon peut varier entre dirents appareils, consultez les instrucons d'ulisaon associes chacun de ces derniers. Bluetooth AIRPULSE A300 BAL AUX USB ou VOLUME INP UT
VOLUME INP UT
OPT COAX ou 3. Lisez la musique sur le disposif connect, et appuyez sur le bouton +/- sur la tlcommande ou appuyez sur le bouton VOLUME / INPUT sur le panneau arrire de l'enceinte acve pour rgler le volume au niveau dsir. OPT/COAX 3. Lisez la musique sur le disposif connect, et appuyez sur le bouton +/- sur la tlcommande ou appuyez sur le bouton VOLUME / INPUT sur le panneau arrire de l'enceinte acve pour rgler le volume au niveau dsir. OPT COAX BAL AUX USB ou VOLUME INP UT
VOLUME INP UT
OPT COAX BAL AUX USB ou VOLUME INP UT
VOLUME INP UT
* Seuls les signaux audio PCM standard (44,1 KHz/48 KHz/96 KHz/192 KHz) sont pris en charge en mode opque ou coaxial.
* Si le disposif opque source est de type ACC, comme un tlviseur, basculez en PCM. 35 Franais 4. En mode Bluetooth, appuyez sur le bouton sur la tlcommande pour couter la piste prcdente/suivante, et appuyez sur le bouton pour lecture/pause.
* La porte de connexion eecve du Bluetooth est de 10 mtres au maximum.
* La connexion Bluetooth du systme A300 ne peut tre eectue aprs recherche que lorsque le mode Bluetooth est sleconn. La connexion Bluetooth existante est dsacve lorsque qu'un mode source dirent est sleconn pour l'enceinte. Lorsque vous basculez en mode Bluetooth, l'enceinte tentera de se reconnecter au dernier priphrique Bluetooth connect.
* Pour dconnecter le Bluetooth, maintenez enfonc le bouton de votre tlcommande pendant environ 2 secondes.
* Pour proter pleinement des foncons Bluetooth de ce produit, vriez que votre appareil mobile prend en charge les prols A2DP et AVCRP.
* Les foncons et la connecvit Bluetooth peuvent varier selon les appareils Bluetooth, et selon la conguraon logicielle de ces derniers. 36 Franais Caractrisques techniques/Informaons supplmentaires Dpannage Tweeter : Tweeter ruban pavillonnaire Caisson de moyens : Caisson de moyens acf en cne d'aluminium suspendu de 6,5 pouces en nodime Systme d'amplicaon : Amplicateur numrique avec processeur Xmos Puissance de sore : G/D (aigus) : 10 W+10 W, G/D (caisson) : 70 W+70 W Plage de frquences : 40 Hz-40 KHz Rapport signal/bruit : G/D 90 dB(A) Modes source : AUX, Entre en balance, USB, Opque, Coaxial, Bluetooth. Les sources USB, opque et coaxiale prennent en charge l'chanllonnage en entre de 192 KHz Sensibilit dentre : AUX : 700 50 mV, Balance : 1150 50 mV, USB : 550 50 mFFs, Opque : 500 50 mFFs, Coaxial : 500 50 mFFs, Bluetooth : 500 50 mFFs Voltage secteur : 100-240 V CA 50/60 Hz Dimensions du boer (LxHxP) : 225 x 385 x 340 (mm) Poids net : 24 Kg (53 livres) / Ensemble AVIS: Pour les besoins du progrs technique et la mise niveau du systme, les informaonscontenues dans ce document peuvent tre sujets changements tout moment sans pravis. Problme Soluon Pas de son Connexion par Bluetooth impossible Vriez si le tmoin est allum. Essayez de monter le volume en ulisant le rglage de volume principal ou la tlcommande. Vriez que les cbles audio sont bien connects et que lentre est correctement rgle sur les haut-parleurs. Vriez s'il y a une sore de signal provenant de la source audio.. Vriez que le haut-parleur est rgl sur lentre Bluetooth. Sil est dans un autre mode dentre audio, le Bluetooth ne se connectera pas. Dconnectez tout appareil Bluetooth en maintenant enfonc le bouton en mode Bluetooth, puis ressayez. La distance de transmission eecve Bluetooth est de 10 mtres, veillez ce que l'appareil est porte. Essayez de connecter un autre appareil Bluetooth Impossible de dmarrer le A300 Vriez si l'alimentaon principale est connecte ou si la prise secteur est acve. Pour en savoir plus concernant AIRPULSE, rendez-vous sur notre site www.airpulseaudio.com Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies Internaonal, Ltd., registered in the United States and other countries. 37 Franais 38 Franais
1 | Internal photos | Internal Photos | 365.99 KiB | March 17 2022 / September 14 2022 | delayed release |
1 | External Photos | External Photos | 352.86 KiB | March 17 2022 / September 14 2022 | delayed release |
1 | Confidentiality Letter | Cover Letter(s) | 118.99 KiB | March 17 2022 |
Standard Form Sample Request for Confidentiality Letter Date: ___11 March 2022_____ Subject: Confidentiality Request for FCC ID: Z9G-EDF171 and IC: 10004A-EDF171 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent n/a n/a Exhibit Block Diagrams Internal Photos ***
Operation Description/Theory of Operation Tune-Up Procedure Schematics Users Manual***
Test Setup External Photos Edifier International Limited has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:
The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** PAG only) Short-Term Confidentiality:
The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___180___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:
_________________________________ Geng Chen / Safety Manager
(Signature/Title)
(Print name) MS-0044715 Page 1 of 1 Revision 0
1 | Model declaration letter | Cover Letter(s) | 107.65 KiB | March 17 2022 |
Difference Declaration Original Model No.: A300 Adding Model No. : A300S To whom it may concern, We, Dongguan Platinum Audio Systems Co., Ltd. would like to declare those models A300, A300S are identical in electrical circuit design and PCB layout.The only difference is model number. Applicant
: Dongguan Platinum Audio Systems Co., Ltd. 6/F, Section 1 Building, No. 2 East Industry Road, Songshan Lake Sci. & Tech. Industrial Park, Dongguan Guangdong 523808, P.R. China Sincerely yours, Address Signature
Name and title
: Geng Chen / Safety Manager Email Tel.
g_chen@edifier.com
: +86 769-88986868-1656
1 | Test Setup Photos | Test Setup Photos | 1.74 MiB | March 17 2022 / September 14 2022 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-03-17 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2022-03-17
|
||||
1 | Applicant's complete, legal business name |
Edifier International Limited
|
||||
1 | FCC Registration Number (FRN) |
0021277140
|
||||
1 | Physical Address |
P.O. Box 6264 General Post Office Hong Kong
|
||||
1 |
HongKong, N/A
|
|||||
1 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@tuv.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
Z9G
|
||||
1 | Equipment Product Code |
EDF171
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
G**** C******
|
||||
1 | Title |
Safety Manager
|
||||
1 | Telephone Number |
0769-******** Extension:
|
||||
1 | Fax Number |
0769-********
|
||||
1 |
g******@edifier.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Edifier International Limited
|
||||
1 | Name |
G****** C********
|
||||
1 | Physical Address |
P.O. Box 6264 General Post Office Hong Kong
|
||||
1 |
Hong Kong
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
0769-********
|
||||
1 |
g******@edifier.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/14/2022 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | ACTIVE SPEAKER SYSTEM | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Dongguan Dongdian Testing Service Co., Ltd.
|
||||
1 | Name |
M****** Y****
|
||||
1 | Telephone Number |
+86-0********
|
||||
1 |
j******@dgddt.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0032600 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC