Sept IB-**
D12 Stereo Bluetooth Speaker Box contents Illustration Remote control Speaker 1. Power switch 2. Power cable 3. Line out 4. AUX input 5. Line in 6. Bass dial 7. Treble dial 8. Volume control/input selector Input mode switch: press Disconnect Bluetooth: press and hold (Bluetooth already connected) Power on: press/press and hold (when powered off via remote control, and power switch already turned on) Power off: press and hold 9. Infrared receiver/input indicator Green light steady lit: AUX/Line in Blue light flashing rapidly: Bluetooth unconnected Blue light steady lit: Bluetooth already connected Remote control Connection 3.5mm-RCA audio cable RCA-RCA audio cable User manual Note: Images are for illustrative purposes only and may differ from the actual product. 1. Power on/off 2. Volume up 3. Previous track/next track
(Bluetooth input) 4. Pause/play
(Bluetooth input) 5. Volume down 6. Movie mode
(extended sound field, ideal for watching movie) 7. Music mode
(highly restored on-site sound, ideal for listening to music) 8. AUX input 9. Line in 10. Bluetooth input Press and hold to disconnect Bluetooth 11. Mute Note: In Movie mode, the sound field extension will change or distort sound quality. Therefore, please enable Music mode when listening to music. Battery loading:
Please refer to the illustration to open the battery compartment, insert the CR 2032 battery and close the compartment. WARNING!
1. Dont swallow the battery; danger of chemical burn. 2. The product includes a wafer battery. Swallowing this battery may lead to injury or death. Do not place the new or old battery in where children can get to it. 3. Dont use the product if the battery cover is missing or not closed, and keep the remote inaccessible to children. 4. Please go to the hospital immediately if the battery is swallowed. Note:
1. Do not place the remote control in places that are hot and humid. 2. Do not charge the batteries. 3. Remove the batteries when unused for a long period of time. 4. The battery should not be exposed to excessive heat such as direct sun, fire or similar. 5. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Po wer On O or Line in input Bluetooth input or or Press the "volume/input" dial on the speaker to switch to AUX input (green light flashing once) or Line in input (green light flashing twice). Respectively press the "AUX"/"LINE" button on the remote control to switch to AUX/Line in input. Press the " " button on the remote control or press the "volume/input" dial on the speaker to switch to Bluetooth input, blue light will flash rapidly. Set your mobile phone to search for and connect to "EDIFIER D12", after pairing is successful, the blue light will be steady lit. To disconnect Bluetooth, press and hold the " " button on the remote control or press and hold the
"volume/input" dial on the speaker for 2 seconds. Note:
To enjoy all Bluetooth functions of this product, please ensure your audio source device has A2DP
(Advanced Audio Distribution Profile) and AVRCP (Audio Video Remote Control Profile) profile. Bluetooth connectivity and compatibility may differ amongst different source devices, depending on the software versions of source devices. Specifications Troubleshooting Power output: R/L (treble): 15W+15W R/L(mid-range and bass): 20W+20W Frequency response: 54Hz-20KHz Audio input: AUX, Line in, Bluetooth Audio output: Line out Declaration for EU Frequency Band: 2.402GHz ~ 2.480GHz RF Power output: 20 dBm (EIRP) There is no restriction of use. No sound Check if the speaker is ON. Try to turn up the volume using the volume control or remote control. Ensure the audio cables are firmly connected and the input is set correctly on the speaker. Check if there is a signal output from the audio source. Cannot connect via Bluetooth Make sure the speaker is switched to Bluetooth input. If it is in other audio input modes, Bluetooth will not connect. Disconnect from any Bluetooth device by pressing and holding the " " button, then try again. Effective Bluetooth transmission range is 10 meters; please ensure that operation is within that range. Try another Bluetooth device for connection. The D12 does not turn on Check if main power is connected, or if the wall outlet is switched on. Noise coming from speakers EDIFIER speakers generate little noise, while the background noise of some audio devices are too high. Please unplug audio cables and turn the volume up, if no sound can be heard at 1 meter away from the speaker, then there is no problem with this product. To learn more about EDIFIER, please visit www.edifier.com For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the section titled Warranty Terms. USA and Canada: service@edifier.ca South America: Please visit www.edifier.com (English) or www.edifierla.com
(Spanish/Portuguese) for local contact information.