FCC ID: Z9G-EDF194 True Wireless Gaming Earbuds

GM3 Plus 80*80mm 80g80%

36 TR UE WIRELESS GAMING EARBUDS M a n u a l Battery level 0%~33%

33%~66%

66%~100%

x1 x2 x3 Low battery Red LED blinks rapidly 0%~33%

33%~66%

66%~100%

x1 x2 x3 Pairing For initial use, the earbuds will auto-on and enter Bluetooth pairing state when taken out of the case (prompt tone: Pairing). Select "HECATE GM3 Plus" in your device setting to connect, wait until you hear the prompt tone of "Connected", then the pairing is successful. Setting Bluetooth Bluetooth My Device HECATE GM3 Plus 3 EN Product Description and Accessories Power ON/OFF Power ON: Take earbuds out of the charging case, or press and hold the touch panel for 3s. Power OFF: Put the earbuds in the charging case. The earbuds will power o automatically if there is no connection after 3 minutes. Touch panel Indicator Power on:

3s Microphone Earbuds Charging case Charging cable Brand card Brand sticker User manual Note:

Please do not charge the product when there is sweat or other liquids inside the charging port, which may damage the product. Images are for illustrative purposes only and may dier from the actual product. Charge Earbuds Place the earbuds in the charging case for charging. After the indicator on the charging case turn on to indicate battery level:

LED on the left lit in a breathing pattern = left earbud is charged LED on the right lit in a breathing pattern = right earbud is charged LED o = fully charged Charging case Red LED lit in a breathing pattern = charging LED o = fully charged Charging time: around 1.5 hours Input: 5V 200mA(Earbuds) 5V 1A(Charging case) 1 2 For more information, please visit our website:

Model: EDF700035 FCC ID: Z9G-EDF194 IC: 10004A-EDF194 Edier International Limited P.O. Box 6264 General Post Oce Hong Kong www.edier.com 2022 Edier International Limited. All rights reserved. Printed in China www.hecategaming.com Designed by DONGGUAN EDIFIER ESPORTS TECHNOLOGY CO.,LTD. NOTICE:

For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for dierent applications. Pictures and illustrations shown on this manual may be slightly dierent from actual product. If any dierence is found, the actual product prevails. Hereby, Edier International Limited declares that the radio equipment type EDF700035 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.edier.com/int/eu-doc.html Note:

For devices paired successfully before, the earbuds will auto-connect to device used last time. If cannot connect to device used last time in 3 minutes, the earbuds will turn o automatically. Reset In OFF state, press and hold either earbud for 8s to reset. The reset is successful when hearing the prompt tone of "Power on", "Pairing" and "Power o" one after another. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment could be installed and operated with minimum distance 0 cm between the radiator and your body. End user must follow the specic operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Controls Touch Panel x2 Play/pause x2 Accept/end a call 2s Reject a call 2s Previous track(left earbud) 2s Next track(right earbud) x3 Voice assistant(left earbud) x3 Music/game mode(right earbud) Input5V 200mA (Earbuds 5V 1A (Charging Case) 4 5 FCC Regulatory Compliance Warning: changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. RF Exposure Compliance This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. ISED Regulatory compliance This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

Lappareil ne doit pas produire de brouillage;

Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. IB-200-000000-14 FCC ISED-

80g 125120MM V1.2/IB-200-000000-14 V1.1 IC/V1.2 ICISED

Edifier International Limited. Dear Sirs:

We hereby declare that because the earphone size is too small, the FCC ID number is printed on the User Manual, hereby declare. FCC ID: Z9G-EDF194 9/24/2022 Sincerely, Signature:

Name: Geng Chen Title: Safety Manager Company: Edifier International Limited. version02

C5266091_X10_Ed.2 Edifier International Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 9/24/2022 Subject: Request for Confidentiality FCC ID: Z9G-EDF194 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: Geng Chen Title: Safety Manager 1/1

C5266091_X8_Ed.1 Letter of Authorization Company: Edifier International Limited Address: P.O. Box 6264 General Post Office Hong Kong Product Name: True Wireless Gaming Earbuds Model Number: EDF700035 FCC Identifier: Z9G-EDF194 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Geng Chen Date: 9/24/2022 Title: Safety Manager Signature of applicant:

1/1