IB-200-WH950N-00 /WH950NB25/V1.0 55X70mm 65 85%
For more information, please visit our website:
www.edifier.com
@Edifierglobal
@Edifier_Global
@Edifier_Global Model: EDF200102 Edifier International Limited P.O. Box 6264 General Post Office Hong Kong www.edifier.com 2022 Edifier International Limited. All rights reserved. Printed in China NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails. IB-200-WH950N-00 V1.0 WH950NB Wireless Noise Cancellation Over-Ear Headpho nes Manual EN Power ON/OFF Reset Controls 2s Press and hold the power button for 2s. 6s 1. The headphones are power on and disconnected from all devices. 2. Press and hold the " " and " " at the same time for 6s. 3. The status light blinks white until reset is completed. 4. Once the headphones are reset, they enter pairing mode automatically. Pairing 1. When theyre power off, press and hold the power button for 6s. The status light blinks blue. 2. Select "EDIFIER WH950NB" in your device setting to connect. 1st Pairing 1. Once the headphones are power on, they will enter Bluetooth pairing automatically. The status light blinks blue. 2. Select "EDIFIER WH950NB" in your device setting to connect. 6s Indicator Fast Pair (Phone with Android 6.0+) Power on and enter Bluetooth pairing with Android*
device close by. Then tap the pop-up window to connect effortlessly.*
Note:
1. For subsequent use, the headphones will auto-connect to device used last time. 2. Dual-Device Connection:After connected to a device, restart and enter Bluetooth pairing to connect the second device. Then manually re-pair the headphones again from the first device to complete Dual-Device connection. Indicator Status Light Bluetooth Status Blue LED blinks Blue LED on for 3s Blue LED blinks twice every 5s Battery Status Red LED blinks twice every 5mins Indicator Red LED on LED off 1 2 3 CN 2s 2 1. 2. 6 LED 3. 6s 1. 6 LED 2. EDIFIER WH950NB LED LED3 LED52 Note:
1. ANC Setting switch between "High Noise Cancellation" & "Ambient Sound" &
"Noise Cancellation Off". 2. Sound Mode switch between "Music Mode" & "Game Mode" & "Theatre Mode". 3. Customized controls via Edifier Connect App.
>2s x1
>2s x1
>2s x1
>6s
>2s x1 x2 x1 x1
>2s
>2s x1
>2s x1
>2s x1
>6s
>2s x1 x2 x1 x1
>2s
6s 1. , LED 2. EDIFIER WH950NB
(Android 6.0)
, 1. 2. :
77 NCC 2 0 1 0 0 2 F D E
) e p y T
n o i t i a n g s e d e p y T
l s o b m y s l i s t i d n a a c m e h c s e c n a t s b u s d e t c i r t s e R e m a n t n e m p u q E i i t d e a n m o r b y o P l s r e h t e l y n e h p d i
) E D B P
i d e t a n m o r b y o P l l s y n e h p b i
) B B P
) t l n e a v a x e H i m u m o r h c 6
r C
) d C
i m u m d a C y r u c r e M
) g H
d a e L i t n U t
w 1
. 0 80 f o e h t e h t t a h t s d e e c x e d e t c i r t s e r e c n a t s b u s t n e t n o c e g a t n e c r e p
t w w 1 1 0
. 0 0 g 0 n d e e c x e d n a
w t w 1
. 0 1 g n 0 d e e c x E 1 1 e t o N e t a c d n
. t t i i i i
. n o i t i d n o c e c n e s e r p f o e u a v l e g a t n e c r e p e c n e r e f e r e h t e c n e s e r p f o e u a v l e c n e r e f e r f o e h t e h t t o n s e o d d e e c x e e g a t n e c r e p d e t c i r t s e r e c n a t s b u s 2 2 e g a t n e c r e p s e t a c d n t n e t n o c e t o N t a h t e h t f o
. i i n o i t p m e x e e h t o t s d n o p s e r r o c d e t c i r t s e r e c n a t s b u s e h T 3 e t o N s e t a c d n t a h t e h t 3
. i i 78 1. 2. 3. Edier Connect App. 79 Edifier Connect Edifier Connect Download on the App Store GET IT ON FCC statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC statement:CAN ICES-003(B) / NMB-003(B). FCC ID: Z9G-EDF193 IC: 10004A-EDF193 210-196511 Input: 5V 1A Hereby, Edifier International Limited declares that the radio equipment type EDF200102 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.edifier.com/int/eu-doc.html Declaration for EU Frequency Band: 2400Mhz-2483.5Mhz RF Power Output: 12dBm (EIRP) There is no restriction of use. Specific Absorption Rate (SAR) information:
This (Edifier International Limited) meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: (EDF200102) (FCC ID: Z9G-EDF193) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly worn on the body is 0.032W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Bodyworn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. Scan and download Edifier Connect App Note:
Images are for illustrative purposes only and may differ from the actual product. 81 82 83 FCC Regulatory Compliance Warning: changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. RF Exposure Compliance This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. ISED Regulatory compliance This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
Lappareil ne doit pas produire de brouillage;
Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. IB-200-000000-14 FCC ISED-
80g 125120MM V1.2/IB-200-000000-14 V1.1 IC/V1.2 ICISED