IC-3231GOP 2MP WI-FI Bullet Camera Quick Installation Guide Video Services must be enabled in TSC VIEWER. Camera setup requires a TSC SERVICE account and the TSC VIEWER mobile app. Camera operation requires minimum available bandwidth of 1.5 Mbps. 1 2 3 4 Download the TSC VIEWER app from the App Store or on Google Play. Check these settings when you turn on your mobile devices Wi-Fi and For best result, configure only one camera at a time. Make sure the Bluetooth isnt connected to another device, such as Bluetooth. headphones Also, make sure the mobile device is (ringer and speaker should be audible) a. Turn on your smart devices Bluetooth and Wi-Fi. b. Launch the app and sign in with your TSC VIEWER account. Plug in the power connector. The LED at the down flashes various colors. Then, wait for the cameras LED to display BLUE only. This may take a couple of minutes. a. Login in your account and press Add CAMERAS at the bottom (iOS) or top
(Android) of the screen. b. Select the type of camera youre installing. The names of the camera models may vary from the illustration c. Name the camera and press NEXT. d. and the cameras LED to flash BLUE at right only a. Start to scan all b. Select your camera c. Select your Wi-Fi d. Enter the network or press Back. network or press password and press ok. Back. Final setup begins cameras via Bluetooth. 5 When setup is complete, the LED on the camera changes from steady blue, to purple and finally to steady green. The app also displays Successful*. Press OK After setup, at the CAMERAS page and check your newly-registered camera. Touch the preview image to launch a live stream from the camera.
*The app will tell you if your need to repeat the setup process. This involves resetting the camera, which is described in the app itself. See the other side of this sheet for more information about the required steps. Resetting the Camera If Wi-Fi fails, or to connect the camera to a different network, use a paper clip to activate the Reset switch. To reset the connection, press and hold for 15 seconds To join a new/different network:
- On the apps Video screen, press and delete the camera in Camera Settings
Press and hold the Reset switch for 15 seconds to reset all settings to their factory defaults
- Unplug the camera and then reconnect it.
- Repeat the registration procedure LED STATUS INDICATOR During installation Blue, blinking Blue, steady Power on. Ready to start setup. Connect to the app. Ready to complete setup. Green, blinking Connecting to Wi-Fi network. Red, steady Setup timed out. Unplug the camera, plug it back in and restart setup process. During operation Green, blinking Connecting to Wi-Fi network. Green, steady Connected to Wi-Fi and operating. Note: The camera is always ready to record but only originates live streaming video when the app calls for a live stream. Red, blinking Not connected to Wi-Fi FEDERAL COMMUNICATIONS COMMISSION (FCC) If using an indoor antenna, have a quality outdoor antenna installed. Reorient the receiving antenna until interference is reduced or eliminated. The user shall not make any changes or modifications to the equipment unless authorized by the Installation Instructions or Users Manual. Unauthorized changes or modifications could void the users authority to operate the equipment. CLASS B DIGITAL DEVICE STATEMENT This equipment has been tested to FCC requirements and has been found acceptable for use. The FCC requires the following statement for your information:
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturers instructions, may cause interference to radio and television reception. It has type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Part 15 or FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Move the radio or television receiver away from the receiver/control. Move the antenna leads away from any wire runs to the receiver/control. FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause interference;
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20cm between the radiator & your body. RED Compliance Statement Compliance with 2014/53/EU Radio Equipment Directive (RED) In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used Plug the receiver/control into a different outlet so that it and the radio or television receiver are on different branch circuits. Consult the dealer or an experienced radio/TV technician for help. and the maximum RF transmit power of the product for sale in the EU:
Frequency range (MHz) Max. Transmit Power (dBm) 2412-2472 16.86 This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. A simplified DoC shall be provided as follows: Article 10(9) Hereby, Edimax Technology Co., Ltd. declares that the radio equipment type 2MP WI-FI Bullet Camera is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: http://www.edimax.com/edimax/global/
Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment. EU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland. EU Countries Not Intended for Use None EU Declaration of Conformity English:
Franais:
etina:
Polski:
Magyar:
Trke:
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Cet quipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Toto zazen je v souladu se zkladnmi poadavky a ostatnmi pslunmi ustanovenmi smrnic 2014/53/EU, 2014/35/EU. Urzdzenie jest zgodne z oglnymi wymaganiami oraz szczeglnymi warunkami okrelonymi Dyrektyw UE 2014/53/EU, 2014/35/EU. Romn: Acest echipament este n conformitate cu cerinele eseniale i alte prevederi relevante ale Directivei 2014/53/UE, 2014/35/UE. 2014/53/EU, 2014/35/EU. Ez a berendezs megfelel az alapvet kvetelmnyeknek s ms vonatkoz irnyelveknek
(2014/53/EU, 2014/35/EU). Bu cihaz 2014/53/EU, 2014/35/EU direktifleri zorunlu istekler ve dier hkmlerle ile uyumludur.
: 2014/53/EU, 2014/35/EU. Slovenina: Toto zariadenie spa zkladn poiadavky a alie prslun ustanovenia smernc 2014/53/EU, 2014/35/EU. Dieses Gert erfllt die Voraussetzungen gem den Richtlinien 2014/53/EU, 2014/35/EU. Deutsch:
Espaol:
El presente equipo cumple los requisitos esenciales de la Directiva 2014/53/EU, 2014/35/EU. Italiano: Questo apparecchio conforme ai requisiti essenziali e alle altre disposizioni applicabili della Nederlands: Dit apparaat voldoet aan de essentile eisen en andere van toepassing zijnde bepalingen van Direttiva 2014/53/EU, 2014/35/UE. richtlijn 2014/53/EU, 2014/35/EU. Portugus: Este equipamento cumpre os requesitos essnciais da Directiva 2014/53/EU, 2014/35/EU. Norsk:
Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv 2014/53/EU, 2014/35/EU. Svenska: Denna utrustning r i verensstmmelse med de vsentliga kraven och vriga relevanta Dansk:
bestmmelser i direktiv 2014/53/EU, 2014/35/EU. Dette udstyr er i overensstemmelse med de v sentligste krav og andre relevante forordninger i direktiv 2014/53/EU, 2014/35/EU. suomen kieli: Tm laite tytt direktiivien 2014/53/EU, 2014/35/EU. oleelliset vaatimukset ja muut asiaankuuluvat mrykset.
WEEE Directive & Product Disposal At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal. Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: Wi-Fi Bullet Video Camera Model No.:
IC-3231GOP The following European standards for essential requirements have been followed:
Directives 2014/53/EU Spectrum
: EN 300 328 V2.1.1 (2016-11) EMC
: EN 301 489-1 V2.1.1 (2017-02) EN 301 489-17 V3.1.1 (2017-02) EMF
: EN 62311:2008 Safety (LVD) :
IEC 62368-1:2014 (2nd Edition) and/or EN 62368-1:2014+A11:2017 Edimax Technology Europe B.V. Fijenhof 2, 5652 AE Eindhoven, The Netherlands a company of :
Edimax Technology Co., Ltd. No. 278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan Signature:
Printed Name:
Title:
David Huang Director Edimax Technology Europe B.V. Date of Signature:
Signature:
July, 2019 Printed Name:
Title:
Albert Chang Director Edimax Technology Co., Ltd.