EW7722PID UserManual C A T A L O G Chapter I: Product Information ........................................................................................ 3 1-1 Introduction and safety information ................................................................................. 3 1-2 Safety Information .............................................................................................................. 4 1-3 System Requirements ....................................................................................................... 5 1-4 Package Contents .............................................................................................................. 5 1-5 Familiar with your new wireless network card ............................................................... 6 CHAPTER II: Driver Installation and Configuration ................................................ 7 2-1 Network Card Installation .................................................................................................. 7 2-2 Connect to Wireless Access Point ................................................................................. 13 2-2-1 Using Edimax Utility .............................................................................................. 14 2-3 Connection Profile Management .................................................................................... 19 2-3-1 Add a new entry .................................................................................................... 19 2-3-2 Remove an existing profile .................................................................................. 23 2-3-3 Edit an existing profile .......................................................................................... 24 2-3-4 Import / Export profile ........................................................................................... 25 2-3-5 WPS Profile Setup ................................................................................................ 27 2-3-5-1 PBC mode WPS configuration ................................................................ 29 2-3-5-2 PIN mode WPS configuration .................................................................. 30 2-4 View Link Status ............................................................................................................... 32 2-5 Advanced Settings ............................................................................................................ 35 2-5-1 Advanced menu ................................................................................................... 35 CHAPTER III: Soft-AP Function ..................................................................................... 36 3-1 Switch to AP Mode and Station Mode ........................................................................... 36 3-2 Configure AP ..................................................................................................................... 37 3-3 Advanced Functionality .................................................................................................... 41 3-4 Access Control .................................................................................................................. 42 3-5 Associate List .................................................................................................................... 44 3-6 About .................................................................................................................................. 45 CHAPTER IV: Appendix ................................................................................................ 46 4-1 Hardware Specification .................................................................................................... 46 4-2 Troubleshooting ................................................................................................................ 47 4-3 Glossary ............................................................................................................................. 49 Federal Communication Commission ............................................................................. 52 Chapter I: Product Information 1-1 Introduction and safety information Thank you for purchasing this high-speed wireless dual band network card! This network card can operate in 2.4GHz or 5GHz wireless network. Excepting common wireless standards 802.11a/b/g, this wireless network card is also able to access 802.11n wireless networks - data transfer rate is 300Mbps, and thats six times faster than 802.11g wireless network!
Main Features Complies with 2.4GHz/5GHz wireless 802.11a/b/g/n standards with data rate up to 300Mbps Includes multi-language EZmax setup wizard Supports PCI-E interface Supports hardware & software WPS configuration function Supports WMM, WMM-PS (IEEE 802.11e QoS standard) Supports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x),WPA2 (AES with IEEE 802.1x) for high security level Supports operating system: Windows XP/Vista/7
* Maximum performance may vary depending on network conditions and environmental factors. 1-2 Safety Information In order to keep the safety of users and your properties, please follow the following safety instructions:
1. This wireless network card is designed for indoor use only. DO NOT expose this network card to direct sun light, rain, or snow. 2. DO NOT put this network card at or near hot or humid places, like kitchen or bathroom. Also, do not left this wireless network card in the car in summer. 3. This network card is small enough to put in a childs mouth, and it could cause serious injury or could be fatal. If they throw the network card, the card will be damaged. PLEASE KEEP THIS NETWORK CARD OUT THE REACH OF CHILDREN!
4. This network card will become hot when being used for long time (This is normal and is not a malfunction). DO NOT put the network card on a paper, cloth, or other flammable objects after the network card has been used for a long time. 5. Theres no user-serviceable part inside the network card. If you found that the network card is not working properly, please contact your dealer of purchase and ask for help. DO NOT disassemble the network card by yourself, warranty will be void. 6. If the network card falls into water, DO NOT USE IT AGAIN BEFORE YOU SEND THE CARD TO THE DEALER OF PURCHASE FOR INSPECTION. 7. If you smell something strange or even see some smoke coming out from the network card, switch the computer off immediately, and call dealer of purchase for help. 1-3 System Requirements One CD-ROM drive Hard Disk : At least 100MB available space One available PCI Express slot Operation System : Windows XP/Vista/7 1-4 Package Contents Wireless Dual-Band PCI-E Adapter x 1 3dBi antenna x 2 Quick Installation Guide x 1 CD (EZmax Wizard, User Manual & Multi-language QIG) x 1 Low-Profile Bracket x 1 1-5 Familiar with your new wireless network card 1. Antenna 2. WPSButton 3. LinkandTx/RxLEDDefinitions 1 2 3 LEDName Link LightStatus Description On Off On Tx/Rx Blinking Off Linktoawirelessaccesspoint Notlinkedtoanywirelessaccesspoint WirelessWPSfunctionisactivated.The networkcardwillwaitfor2minutesto establishWPSconnection. Wirelessnetworkcardisnormallyinstalled
/Linkedtoawirelessaccesspoint/
Transferringorreceivingdata. Nowirelessactivity CHAPTER II: Driver Installation and Configuration 2-1 Network Card Installation 1. SWITCHTHECOMPUTEROFF,removethecoverandinsertthewirelessnetwork cardintoanemptyPCIexpressslotofyourcomputerandthenreplacethecover. 2. Installtheantennaonthewirelessnetworkcard,andmakesuretheantennais securelyinstalled.Toimproveradioreception,pleaseadjustantennatothe properposition. 3. SoftwareInstallation,ThiswizardcanberuninWindowsXP/Vista/7.The followingproceduresareoperatedinWindowsXP.YoucaninstalltheWireless AdapterbyEZMAXSetupWizardintheCDROMincludinginthepackage.The wizardisaneasyandquickconfigurationtoolforinternetconnectionwithseries process. WhenyoustartEZMAXSetupWizard,youwillgetthefollowingwelcomescreen. Pleasechoosethelanguagetostarttheconfiguration.Thewizardwillguideyou tofinishyournetworkconnection.Wewillnotprovideanyinstructionforthe EZMAXSetupWizardhere. If you lose the CD ROM or you prefer the traditional setup procedure, please follow the instruction as following step. 1. Execute Setup.exe program inside the CD then the programs will appear. Please read the end user license agreement and click I accept the terms of the license agreement then click Next button, to accept license agreement. 2. It is recommend installing driver and utility if the network card is installing the first time. If you want to update the driver only, choose Install driver only. Click Next to continue. 3. You can choose the configuration tool used to configure the wireless network card here. Its recommended to select Edimax Configuration Tool, which provides fully access to all functions of this wireless network card. If you prefer to use the wireless configuration tool provided by Windows XP or Vista, please select Microsoft Zero Configuration Tool then click Next. 4. Now youll see the following message, please click Install to start utility installation. If you see Found New Hardware message again, please ignore it and wait. 5. Please wait while the install procedure is running. When you see this message, please click Finish to complete the driver installation process. 6. After installation is complete, wireless configuration utility will be shown in the desktop of your computer automatically. You will also see an icon at the lower-right corner of your windows system. If you put the mouse cursor on the icon, the status of wireless card will be displayed as a popup balloon. HERE!
7. When you want to configure your wireless connection, please right click on this icon, and a popup menu will appear. You can click Launch Config Utility to start configuration program. If you want to close the configuration utility, please click Exit. 8. Please note that if you stopped config utility by Exit function, youll not be able to maintain the wireless link to the access point you wish to use. In this case, you can start config utility again by clicking Edimax Wireless Utility icon from Start -> All Programs
-> Edimax Wireless, as shown below. 2-2 Connect to Wireless Access Point After the driver is correctly installed, it will try to connect to any unencrypted wireless access point automatically. If you want to connect to a specific wireless access point, or the access point you wish to connect uses encryption, you have to configure the wireless network card and input required parameters, to get connected to the wireless access point you wish to connect. The current status of wireless connection will be displayed by Edimax configuration utility icon:
Wireless connection is established, good signal reception. Wireless connection is established, normal signal reception. Wireless connection is established, weak signal reception. Connection is not established yet. Wireless network card is not detected. There are two ways you can configure your wireless network card to connect to wireless access point: using the Edimax configuration utility and using built-in windows zero configuration utility. 2-2-1 Using Edimax Utility Please follow the following instructions to use Ralink configuration utility to connect to wireless access point. 1. Left-click the Ralink configuration utility icon located at lower-right corner of computer desktop, and configuration menu will appear:
HERE!
2. Wireless utility will appear. button to open the list of available wireless Click Site Survey networks (and their status). There are 6 fields in Site Survey list:
Field#
1 (SSID) Description The Service-Set IDentifier of network device
(The name of network device) The type of network device Infrastructure (Access Point) Ad-Hoc The channel number of this network device Available wireless mode. 2 (Type) 3 (Channel) 4
(Wireless mode) 802.11a wireless capability 802.11b wireless capability 802.11g wireless capability 802.11n wireless capability Security mode. When nothing is displayed here, means this network device does not require security and anyone can connect to it. Shows the wireless signal strength in percentage. Higher percentage means better signal quality. 5 (Security) 6
(Signal Strength) 3. To connect to a wireless access point, double click on it:
4. If the wireless access point you wish to connect does not appear here, you button to scan for wireless access points again; if can click Refresh the wireless access point youre looking for still not appear, try to move the computer closer. 5. Youll be prompted with wireless access points encryption method (if any):
Click right arrow to continue. Generally you dont have to change encryption method, it will be detected automatically. If you selected a wrong encryption method, connection will not be able to establish. 6. Please input encryption key (or passphrase, depends on encryption method) here, then click right arrow. 7. Network card will attempt to connect to access point now, this may require few seconds to minutes, please be patient. When you see theres a check shown beside the access point you wish to connect, your computer is connected to access point you selected. The connection status will be displayed in configuration utility also.
(see example picture below). Windows will prompt you for establish connection also:
2-3 Connection Profile Management For connections youll frequently use, you can save them as a profile and you can recall all settings (security type, password, etc.) back soon. 2-3-1 Add a new entry By this function you can setup the connection parameters for a specific wireless access point in advance, so you can recall a set of connection parameters quickly. To do this, follow the following procedures:
1. Click Profile in configuration utility:
Profile manager will appear. Click plus sign to add a new profile. 2. Please name the profile in Profile Name field, and select the AP you wish to connect in SSID dropdown list, then click right arrow If youre connecting to a network device using AD-HOC connection method, select Ad Hoc - Connect to other computers first. 3. Select this APs authentication and encryption method from dropdown list, then click right arrow
. 4. Input passphrase key here (or WEP key, if required), then click right arrow 5. Check this box if you wish to enable pre-logon connection. When this feature is enabled, wireless network connection will be established before you logon Windows so you can authenticate yourself against network server. If you dont need this, you can leave this box unchecked. Click right arrow to continue. 6. The profile will be saved in the list:
You can repeat step 2 to 6 to setup more profiles of wireless connection. When you wish to connect to a certain wireless access point, click Active button (as indicated above). A check mark will be displayed beside active profile. 2-3-2 Remove an existing profile When you no longer need an existing profile, just select it from the list and click Delete button. If the profile you wish to delete is active now, youll be prompted to confirm deletion:
To delete anyway, click OK; to cancel, click mark. 2-3-3 Edit an existing profile If you have added a profile before, and you wish to change the content of the profile, you can use this function. Please select a profile from the list first, then click Edit button. Youll be provided with the contents of selected profile; you can edit them and save changes. 2-3-4 Import / Export profile If you need to move your wireless settings to another computer, or you just want to make a backup, you can use import / export function to make a copy, or restore current profile. To backup a profile, click Export
Youll be prompted to select a place to save profile setting file. Select a folder in your computer and name the profile, then click Save. To recall previously-saved profiles, click Import
Select a profile (file with .prof extension), and click Open Please note that this will overwrite any existing profile(s). 2-3-5 WPS Profile Setup WPS (Wi-Fi Protected Setup) is a new, convenient way to setup secured wireless connections. You only need to push a button or input a set of 8-digit random number, and you can setup a secure connection between wireless devices, like what a professional wireless expert can do. To use WPS profile, you have to make sure the access point you wish to connect supports WPS first. You can discover if an access point is WPS-capable or not by site-survey:
In this list, there are ten access points support WPS, which are indicated by icon. You can still establish secured connection with WPS-capable access points in conventional way. To establish WPS-style connection, click Add WPS profile button:
Youll be prompted to select WPS method and WPS AP:
To use PIN (8-digit or 4-digit random number) to setup WPS, select PIN /
numeric code, and you have to select an AP from WPS AP List dropdown menu; to establish connection by Push-Button Configuration (PBC), you dont have to select an AP from WPS AP List dropdown list. Note: This device follows WPS 2.0 Standard Specification to allow inputting 4-digit PIN code, pls. make sure your Wireless Router or Access Point supports WPS 2.0 accordingly, or use 8-digit PIN as usual. You can also check Auto box and configuration utility will select a correct WPS-capable AP to connect when in PIN / numeric code mode. Click right arrow to continue. 2-3-5-1 PBC mode WPS configuration When you want to use PBC mode:
Click Start PBC button:
Now, please push the WPS button on the access point (a physical button or a software button in its configuration menu - please refer to access points user manual) within 2 minutes. 2-3-5-2 PIN mode WPS configuration There are two roles in PIN mode WPS configuration: registrar and enrollee. Registrar is the one who waits for incoming WPS request, and enrollee is the one who searches for WPS registrar and will attempt to connect it. The WPS role of two devices should not be same: When one device is registrar, the other one must be enrollee, and vice versa. To setup WPS connection by PIN, select PIN / numeric code, then click right arrow. There will be a menu displaying 8-digit WPS PIN code on the configuration menu, please get this number. Please remember the number will become invalid after a short period of time (2 minutes or so). Select Enrollee in Config mode dropdown list, and input PIN code in Pin Code, then click right arrow. Click StartPIN to begin WPS connection, please be patient. Youll be prompted when WPS connection is established successfully; if you received an error, you can try again, but please remember to make sure the PIN you obtained from access point is still valid. 2-4 View Link Status You can check the status of active wireless connection by clicking Link Information button:
A new window will appear:
There are 3 kinds of link information:
a. Link status Displays the status of active connection. b. Throughput Displays the throughput of active connection. c. Statistics Displays the statistics of active connection. Select Transmit or Receive to switch displaying statistics of transmitted and received data packets. To reset counters, click 2-5 Advanced Settings Click Advanced menu, you can configure some advanced wireless settings. button to show advanced configuration menu. In this Normally you dont need to change these settings to establish wireless connection. Only change these settings when you know what youre doing and you really need these changes. 2-5-1 Advanced menu You can configure wireless frequency and available radio channels here. CHAPTER III: Soft-AP Function Excepting become a wireless client of other wireless access points, this wireless card can act as a wireless service provider also! You can switch this wireless cards operating mode to AP mode to simulate the function of a real wireless access point by software, and all other computers and wireless devices can connect to your computer wirelessly, even share the internet connection you have!
Please follow the instructions in following chapters to use the AP function of your wireless card. 3-1 Switch to AP Mode and Station Mode The operating mode of the wireless card is Station Mode (becoming a client of other wireless access points) by default. If you want to switch to AP mode, please right-click configuration utility icon, and click Switch to AP Mode.
(Windows XP Only) Youll see the configuration utilitys icon switched to AP icon. Notice: If you receive windows firewall (or other firewalling software) warns you about access point utility, please click Unblock (or similar), or software AP will not function normally. To launch AP manager, right-click configuration utilitys icon, and select Launch Config Utilities. The soft-AP configuration utility will appear, along with the status of software AP:
3-2 Configure AP To use software AP, you need to configure it first to accept incoming wireless connections. Click Config AP button to continue. You have to input the SSID of this software AP first:
Input SSID in SSID field. If you wish to hide SSID so only clients who know your actual SSID can get connected, check Hide SSID box. You can also change wireless operating mode by Wireless Mode dropdown menu. When you finish, click right arrow
. In this page, you can select the country region of this software AP. Different country has different radio regulation and therefore it would be illegal to use certain channel (frequency) in some countries. Please select a correct country region to avoid legal problem. Note: You may not be able to change this option in some countries due to legal requirements. You can also select wireless channel of this software AP by Channel dropdown list. If you wish to enable 40MHz Bandwidth capability, check Enable 40 MHz Bandwidth box. When you finish, click right arrow
. In this page, you have to select the authentication and encryption method of this software AP. Available Authentication options are:
Open: No security. Anyone who found this AP can get connected. Shared: Use shared key authentication (WEP). WPA-PSK: Use WPA-PSK authentication. WPA2-PSK: Use WPA2-PSK authentication. WPA-PSK / WPA2-PSK: Allows both WPA-PSK and WPA2-PSK authentication. Available Encryption options are (This menu will vary when you select different authentication method):
Not Encryption: No security WEP: Use WEP (Wired Equivalent Privacy) encryption. TKIP: Use TKIP encryption. AES: Use AES encryption. When you finish, click right arrow
. In this page, you can configure WEP / WPA passphrase (password). For WEP:
Select default Tx Key (normally you can just use Key 1), Key Format (Hex characters or ASCII characters), and input WEP key. If you select Hex key format, input 10 or 26 characters (number 0-9 and alphabets A-F); if you select ASCII, input 5 or 13 characters (number 0-9 and alphabets). For WPA-PSA / WPA2-PSK:
Input WPA-PSK / WPA2-PSK key here. If you wish to change group rekey time interval, you can change it, but normally you dont need to change it and software AP will still work fine. WPA-PSK / WPA2-PSK key must be 8 to 63 ASCII characters or 64 Hex characters. When you finish, click right arrow AP is ready and able to accept incoming connection requests. After you finish this step, your software 3-3 Advanced Functionality To setup advanced software AP functionality, click Advanced button. There are several setup items:
No forwarding among wireless clients: Check this box and every wireless clients will not be able to communicate with each other. Beacon Interval (ms): Change wireless radio beacon time interval in milliseconds. Normally you dont have to change this setting. TX Power: Change the wireless radio output power here. Please select a proper output power and you can avoid some unwanted wireless intruders. Idle time: The allowed time before proceeding with the authentication. Normally you dont have to change this setting. Click Apply button to save changes. 3-4 Access Control You can allow or disallow certain wireless clients to connect your software AP by this function. To setup access control, click Access Control List button
. Access control list will appear:
First you have to select access control policy:
Disable: No access controlling Allow All: Only allow clients in the list to establish connection (white list). Reject All: Rejects all clients in the list to establish connection (black list). Then you have to input the 12-character MAC address in MAC Address field. You may find the MAC address of a certain network card on itself (something like a label). Please note that you dont have to input : (colon) or - (dash) character between every 2 MAC address characters. Click Add to add this MAC address in the list. To delete a MAC address in the list, select it and click Delete button; to delete all entries, click Remove All button. Click Apply button to save changes. 3-5 Associate List You can see the list of all wireless clients that connected to this software AP. Click Connected Devices button to show the list. 3-6 About Click this button to see the version information of software AP configuration utility. CHAPTER IV: Appendix 4-1 Hardware Specification Standards: IEEE 802.11a/b/g/n Frequency Band: 2.4000 ~ 2.4835GHz (Industrial Scientific Medical Band) Interface: PCI Express 5.1500 ~ 5.8250GHz (subject to local regulations) Data Rate: 11b: 1/2/5.5/11Mbps 11g: 6/9/12/24/36/48/54Mbps 11n (20MHz): MCS0-23 (up to 144Mbps) 11n (40MHz): MCS0-23 (up to 300Mbps) Securities: WEP 64/128, WPA, WPA2 802.1x Support Antenna: External antenna (2T2R, MIMO technology) Drivers: Windows XP/Vista/7 LED: Link/Activity Temperature: 32~104F (0 ~ 40C) Humidity: 10-95% (NonCondensing) Certification: FCC, CE 4-2 Troubleshooting If you encounter any problem when youre using this wireless network card, dont panic! Before you call your dealer of purchase for help, please check this troubleshooting table, the solution of your problem could be very simple, and you can solve the problem by yourself!
Scenario I cant find any wireless access point / wireless device in Site Survey function. Solution 1. Click Rescan for few more times and see if you can find any wireless access point or wireless device. 2. Please move closer to any known wireless access point. 3. Ad hoc function must be enabled for the wireless device you wish to establish a direct wireless link. 4. Please adjust the position of network card
(you may have to move your computer if youre using a notebook computer) and click Rescan button for few more times. If you can find the wireless access point or wireless device you want to connect by doing this, try to move closer to the place where the wireless access point or wireless device is located. 1. Please make sure the wireless network card is inserted into your computers PCI-E slot. If the Realtek configuration utilitys icon is black, the network card is not detected by your computer. 2. Reboot the computer and try again. 3. Remove the card and insert it into another PCI-E slot. 4. Remove the driver and re-install. 5. Contact the dealer of purchase for help. 1. Click Connect for few more times. 2. If the SSID of access point you wish to connect is hidden (nothing displayed in Nothing happens when I click Launch config utilities I can not establish connection with a certain wireless access point The network is slow /
having problem when transferring large files SSID field in Site Survey function), you have to input correct SSID of the access point you wish to connect. Please contact the owner of access point to ask for correct SSID. 3. You have to input correct passphrase /
security key to connect an access point with encryption. Please contact the owner of access point to ask for correct passphrase /
security key. 4. The access point you wish to connect only allows network cards with specific MAC address to establish connection. Please go to About tab and write the value of Phy_Addess down, then present this value to the owner of access point so he / she can add the MAC address of your network card to his / her access points list. 1. Move closer to the place where access point is located. tab. 2. Enable Wireless Protection in Advanced 3. Try a lower TX Rate in Advanced tab. 4. Disable Tx Burst in Advanced tab. 5. Enable WMM in QoS tab if you need to use multimedia / telephony related applications. 6. Disable WMM Power Save Enable in QoS tab. 7. There could be too much people using the same radio channel. Ask the owner of the access point to change the channel number. Please try one or more solutions listed above. 4-3 Glossary 1. What is the IEEE 802.11g standard?
802.11g is the new IEEE standard for high-speed wireless LAN communications that provides for up to 54 Mbps data rate in the 2.4 GHz band. 802.11g is quickly becoming the next mainstream wireless LAN technology for the home, office and public networks. 802.11g defines the use of the same OFDM modulation technique specified in IEEE 802.11a for the 5 GHz frequency band and applies it in the same 2.4 GHz frequency band as IEEE 802.11b. The 802.11g standard requires backward compatibility with 802.11b. The standard specifically calls for:
A. A new physical layer for the 802.11 Medium Access Control (MAC) in the 2.4 GHz frequency band, known as the extended rate PHY (ERP). The ERP adds OFDM as a mandatory new coding scheme for 6, 12 and 24 Mbps (mandatory speeds), and 18, 36, 48 and 54 Mbps
(optional speeds). The ERP includes the modulation schemes found in 802.11b including CCK for 11 and 5.5 Mbps and Barker code modulation for 2 and 1 Mbps. B. A protection mechanism called RTS/CTS that governs how 802.11g devices and 802.11b devices interoperate. 2. What is the IEEE 802.11b standard?
The IEEE 802.11b Wireless LAN standard subcommittee, which formulates the standard for the industry. The objective is to enable wireless LAN hardware from different manufactures to communicate. 3. What does IEEE 802.11 feature support?
The product supports the following IEEE 802.11 functions:
CSMA/CA plus Acknowledge Protocol Multi-Channel Roaming Automatic Rate Selection RTS/CTS Feature Fragmentation Power Management 4. What is Ad-hoc?
An Ad-hoc integrated wireless LAN is a group of computers, each has a Wireless LAN card, Connected as an independent wireless LAN. Ad hoc wireless LAN is applicable at a departmental scale for a branch or SOHO operation. 5. What is Infrastructure?
An integrated wireless and wireless and wired LAN is called an Infrastructure configuration. Infrastructure is applicable to enterprise scale for wireless access to central database, or wireless application for mobile workers. 6. What is BSS ID?
A specific Ad hoc LAN is called a Basic Service Set (BSS). Computers in a BSS must be configured with the same BSS ID. WEP is Wired Equivalent Privacy, a data privacy mechanism based on a 40 bit shared key algorithm, as described in the IEEE 802 .11 standard. 7. What is WEP?
8. What is TKIP?
TKIP is a quick-fix method to quickly overcome the inherent weaknesses in WEP security, especially the reuse of encryption keys. TKIP is involved in the IEEE 802.11i WLAN security standard, and the specification might be officially released by early 2003. 9. What is AES?
AES (Advanced Encryption Standard), a chip-based security, has been developed to ensure the highest degree of security and authenticity for digital information, wherever and however communicated or stored, while making more efficient use of hardware and/or software than previous encryption standards. It is also included in IEEE 802.11i standard. Compare with AES, TKIP is a temporary protocol for replacing WEP security until manufacturers implement AES at the hardware level. 10. Can Wireless products support printer sharing?
Wireless products perform the same function as LAN products. Therefore, Wireless products can work with Netware, Windows 2000, or other LAN operating systems to support printer or file sharing. 11. Would the information be intercepted while transmitting on air?
WLAN features two-fold protection in security. On the hardware side, as with Direct Sequence Spread Spectrum technology, it has the inherent security feature of scrambling. On the software side, WLAN series offer the encryption function (WEP) to enhance security and Access Control. Users can set it up depending upon their needs. 12. What is DSSS? What is FHSS? And what are their differences?
Frequency-hopping spread-spectrum (FHSS) uses a narrowband carrier that changes frequency in a pattern that is known to both transmitter and receiver. Properly synchronized, the net effect is to maintain a single logical channel. To an unintended receiver, FHSS appears to be short-duration impulse noise. Direct-sequence spread-spectrum (DSSS) 13. What is Spread Spectrum?
generates a redundant bit pattern for each bit to be transmitted. This bit pattern is called a chip (or chipping code). The longer the chip is, the greater the probability that the original data can be recovered. Even if one or more bits in the chip are damaged during transmission, statistical techniques embedded in the radio can recover the original data without-the need for retransmission. To an unintended receiver, DSSS appears as low power wideband noise and is rejected (ignored) by most narrowband receivers. Spread Spectrum technology is a wideband radio frequency technique developed by the military for use in reliable, secure, mission-critical communication systems. It is designed to trade off bandwidth efficiency for reliability, integrity, and security. In other words, more bandwidth is consumed than in the case of narrowband transmission, but the trade off produces a signal that is, in effect, louder and thus easier to detect, provided that the receiver knows the parameters of the spread-spectrum signal being broadcast. If a receiver is not tuned to the right frequency, a spread spectrum signal looks like background noise. There are two main alternatives, Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS). WPS stands for Wi-Fi Protected Setup. It provides a simple way to establish unencrypted or encrypted connections between wireless clients and access point automatically. User can press a software or hardware button to activate WPS function, and WPS-compatible wireless clients and access point will establish connection by themselves. There are two types of WPS: PBC (Push-Button Configuration) and PIN code. 14. What is WPS?
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna. 2. 3. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. 4. Consult the dealer or an experienced radio technician for help. FCC Caution This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The equipment version marketed in US is restricted to usage of the channels 1-11 only. This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range. R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity
(R&TTE) The R&TTE Directive repeals and replaces in the directive 98/13/EEC
(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000. Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment. EU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, Bulgaria, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Poland, Romania, Slovakia, Slovenia, the Netherlands, Portugal, Spain, Sweden, and the United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland. EU Countries not intended for use None Please check the declaration of conformity on www.edimax.com