| all | frequencies |
|
|
exhibits | applications |
|---|---|---|---|---|---|
| manuals | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
User Manual part 1 of 2 revised | Users Manual | 4.29 MiB | ||||
| 1 |
|
User Manual part 2 of 2 revised | Users Manual | 3.20 MiB | ||||
| 1 | Cover Letter(s) | |||||||
| 1 | External Photos | June 03 2015 | ||||||
| 1 | Cover Letter(s) | June 03 2015 | ||||||
| 1 | RF Exposure Info | June 03 2015 | ||||||
| 1 | Internal Photos | June 03 2015 | ||||||
| 1 | ID Label/Location Info | June 03 2015 | ||||||
| 1 | Cover Letter(s) | June 03 2015 | ||||||
| 1 | Test Report | June 03 2015 | ||||||
| 1 | Test Setup Photos | June 03 2015 |
| 1 | User Manual part 1 of 2 revised | Users Manual | 4.29 MiB |
BR-6428nS V3 / BR-6438nS BR-6228nS V3 / BR-6238nS User Manual 08-2014 / v1.0 CONTENTS I. Product Information .............................................................................. 1 I-1. I-2. I-3. I-4. Package Contents .......................................................................................................... 1 LED Status ...................................................................................................................... 2 Back Panel ...................................................................................................................... 3 Safety Information ......................................................................................................... 4 II. Installation ............................................................................................ 5 II-1. II-2. II-3. II-4. II-5. II-6. II-7. Wi-Fi Router Mode ........................................................................................................ 8 Access Point Mode....................................................................................................... 12 Range Extender Mode ................................................................................................. 16 Wireless Bridge Mode.................................................................................................. 22 WISP Mode .................................................................................................................. 28 WPS Setup .................................................................................................................... 36 Reset to Factory Default Settings ................................................................................ 36 III. Browser Based Configuration Interface ................................................. 37 Login ............................................................................................................................. 37 III-1. Save Settings ................................................................................................................ 39 III-2. Main Menu .................................................................................................................. 40 III-3. Status ........................................................................................................................... 41 III-3-1. Setup Wizard ................................................................................................................ 42 III-3-2. Internet/WISP .............................................................................................................. 44 III-3-3. III-3-3-1. WAN Setup ................................................................................................................... 45 III-3-3-1-1. Dynamic IP ................................................................................................................... 45 III-3-3-1-2. Static IP ........................................................................................................................ 46 III-3-3-1-3. PPPoE ........................................................................................................................... 48 III-3-3-1-4. PPTP ............................................................................................................................. 50 III-3-3-1-5. L2TP .............................................................................................................................. 52 III-3-3-1-6. WISP ............................................................................................................................. 54 III-3-3-2. DDNS ............................................................................................................................ 55 LAN ............................................................................................................................... 57 III-3-4. III-3-5. 2.4GHz Wireless ........................................................................................................... 60 III-3-5-1. Basic ............................................................................................................................. 60 III-3-5-1-1. Disable ......................................................................................................................... 64 III-3-5-1-2. WEP .............................................................................................................................. 65 III-3-5-1-3. WPA Pre-Shared Key .................................................................................................... 66 III-3-5-1-4. WPA Radius .................................................................................................................. 67 III-3-5-2. Guest/ Multiple SSID .................................................................................................... 68 WPS .............................................................................................................................. 71 III-3-5-3. III-3-5-4. III-3-5-5. III-3-6. III-3-6-1. III-3-6-2. III-3-6-3. III-3-6-4. III-3-7. III-3-7-1. III-3-7-2. III-3-8. III-3-8-1. III-3-8-2. III-3-8-3. III-3-8-4. III-3-8-5. III-3-8-6. III-3-9. III-3-9-1. III-3-9-2. III-3-9-3. III-3-9-4. III-3-9-5. III-3-9-6. III-3-9-7. III-3-9-8. III-3-9-9. Access Control ............................................................................................................. 72 Schedule ....................................................................................................................... 74 Firewall ......................................................................................................................... 76 URL Blocking ................................................................................................................ 76 Access Control ............................................................................................................. 78 DMZ .............................................................................................................................. 82 DoS ............................................................................................................................... 83 QoS ............................................................................................................................... 85 QoS ............................................................................................................................... 85 iQoS .............................................................................................................................. 88 Advanced ..................................................................................................................... 90 Static Routing ............................................................................................................... 90 Port Forwarding ........................................................................................................... 91 Virtual Server ............................................................................................................... 93 2.4GHz Wireless ........................................................................................................... 94 IGMP ............................................................................................................................ 96 UPnP............................................................................................................................. 97 Administration ............................................................................................................. 98 Time Zone .................................................................................................................... 98 Password ...................................................................................................................... 99 Remote Access ...........................................................................................................100 Backup/Restore .........................................................................................................101 Upgrade .....................................................................................................................101 Restart ........................................................................................................................102 Logs ............................................................................................................................102 Active DHCP Client .....................................................................................................103 Statistics .....................................................................................................................103 IV. Appendix ........................................................................................... 104 IV-1. IV-1-1. IV-1-1-1. IV-1-1-2. IV-1-1-3. IV-1-1-4. IV-1-1-5. IV-1-2. IV-1-2-1. IV-1-2-2. IV-1-2-3. IV-1-2-4. IV-1-2-5. Configuring your IP address .......................................................................................104 How to check that your computer uses a dynamic IP address .................................105 Windows XP ...............................................................................................................105 Windows Vista ...........................................................................................................107 Windows 7 .................................................................................................................109 Windows 8 .................................................................................................................112 Mac OS .......................................................................................................................116 How to modify the IP address of your computer ......................................................118 Windows XP ...............................................................................................................118 Windows Vista ...........................................................................................................120 Windows 7 .................................................................................................................121 Windows 8 .................................................................................................................124 Mac ............................................................................................................................128 IV-1-3. IV-1-3-1. IV-1-3-2. IV-1-4. IV-1-4-1. IV-1-4-2. IV-1-4-3. IV-2. IV-3. IV-4. How to Find Your Network Security Key ...................................................................131 Windows 7 & Vista .....................................................................................................131 Mac ............................................................................................................................133 How to Find Your Routers IP Address .......................................................................136 Windows XP, Vista & 7 ...............................................................................................136 Windows 8 .................................................................................................................138 Mac ............................................................................................................................141 Connecting to a Wi-Fi network ..................................................................................143 Troubleshooting .........................................................................................................145 Glossary......................................................................................................................149 I. Product Information I-1. Package Contents Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s):
Power Adapter Quick Installation Guide BR-6428nS V3*
BR-6228nS V3*
or Ethernet Cable CD-ROM
* BR-6428nS V3 and BR-6438nS are actually the same designed wireless router with different names.
* BR-6228nS V3 and BR-6238nS are actually the same designed wireless router with different names. 1 I-2. LED Status LED Color LED Status Description Power Internet Wi-Fi WPS White On Off On Device is on. Device is off. Internet is connected. Blue Blue Blue Flashing No Internet connection. On Off On Wi-Fi activity
(transferring/receiving data). Wi-Fi not active. WPS connection established
(displays on for one minute). Flashing WPS in progress. Off No WPS connection. 2 I-3. Back Panel Reset/WPS Button Internet/WAN Port LAN Ports 14 Power Port 3 I-4. Safety Information In order to ensure the safe operation of the device and its users, please read and act in accordance with the following safety instructions. 1. The device is designed for indoor use only; do not place it outdoors. 2. Do not place the device in or near hot/humid places, such as a kitchen or 3. Do not pull any connected cable with force; carefully disconnect it from the BR-6428nS V3/BR-6228nS V3. 4. Handle the device with care. Accidental damage will void the warranty of bathroom. the device. 5. The device contains small parts which are a danger to small children under 3 years old. Please keep the device out of reach of children. 6. Do not place the device on paper, cloth, or other flammable materials. The device may become hot during use. 7. There are no user-serviceable parts inside the device. If you experience problems with the device, please contact your dealer of purchase and ask for help. 8. The device is an electrical device and as such, if it becomes wet for any reason, do not attempt to touch it without switching the power supply off. Contact an experienced electrical technician for further help. 4 II. Installation 1. Plug the included power adapter into the devices 5V DC power port and the other end into an electrical socket. 2. Ensure that the power LED is lit. If not, the device is not properly connected. 3. Use a Wi-Fi device (e.g. computer, tablet, smartphone) to search for a Wi-Fi network with the SSID edimax.setup and connect to it. iOS 4 or Android 4 and above are required for setup on a smartphone or tablet. 4. Open a web browser and if you do not automatically arrive at the Get Started screen shown below, enter the URL http://edimax.setup and click Get Started to begin the setup process. 5 If you cannot access http://edimax.setup, please make sure your computer is set to use a dynamic IP address. Refer to IV-1. Configuring your IP address for more information. 5. Choose if you want to use your product in its default Wi-Fi router mode or in a different mode. 6 The devices five available modes are outlined below:
Wi-Fi Router Mode Access Point Mode Range Extender Mode The device connects to your modem and provides 2.4GHz Internet (wireless and Ethernet) access for your network devices. The device connects to an existing router via Ethernet cable and provides 2.4GHz Internet
(wireless and Ethernet) access for your network devices. The device connects wirelessly to your existing 2.4GHz network and repeats the wireless signal(s). Wireless Bridge Mode The device connects to a network device for WISP Mode example: TV, gaming console, or media player via Ethernet cable and acts as a wireless receiver, allowing the network device to join your Wi-Fi network. The device connects wirelessly to your Wireless Internet Service Provider and provides 2.4GHz Internet (wireless and Ethernet) access for your network devices. 7 II-1. Wi-Fi Router Mode 1. Select whether to use the iQ Setup wizard (recommended) to detect your Internet connection type, or enter the settings manually. Manual configuration is only recommended for advanced users. 2. Connect the Internet port of your device to the LAN port of your modem using an Ethernet cable, and then click Next. 8 3. Please wait a moment while the device tests the connection. 4. Click Next to continue and configure the devices wireless network. 5. Enter a name and password for your 2.4GHz wireless network, then click Next to continue. 9 6. A summary of your configuration will be displayed, as shown below depending on your Internet type. Check that all of the details are correct and then click Next to proceed. If you wish to backup the devices settings, click Backup this configuration to open a new window and save your current configuration to a .txt file. 10 7. Please wait while the device applies your settings. 8. A final congratulations screen will indicate that setup is complete. You can now connect to the devices new SSID(s) which are shown on the screen then close the browser window. 11 II-2. Access Point Mode 1. Select Access Point from the top menu and click Next. 2. Connect the LAN port of your BR-6428nS V3/BR-6228nS V3 to the LAN port of your existing router using an Ethernet cable, then click Next. 3. Select Obtain an IP address automatically or Use the following IP address for your BR-6428nS V3/BR-6228nS V3. If you are using a static IP, enter the IP address, subnet mask and default gateway. Click Next to proceed to the next step. 12 Obtain an IP address automatically is the recommended setting for most users. For more guidance on static IP addresses, please refer to IV-1. Configuring your IP address. 4. Enter a name and password for your 2.4GHz wireless network, then click Next to continue. 5. A summary of your configuration will be displayed, as shown below. Check that all of the details are correct and then click Next to proceed. 13 If you wish to backup the devices settings, click Backup this configuration to open a new window and save your current configuration to a .txt file. 6. Please wait a moment until the BR-6428nS V3/BR-6228nS V3 is ready. 14 8. A final congratulations screen will indicate that setup is complete. You can now connect to the devices new SSID(s) which are shown on the screen then close the browser window. 9. The BR-6428nS V3/BR-6228nS V3 is working and ready for use. Refer to IV-2. Connecting to a Wi-Fi network if you require more guidance. 15 II-3. Range Extender Mode 1. Select Range Extender from the top menu and click Next. 2. Please ensure your BR-6428nS V3/BR-6228nS V3 is within Wi-Fi range of your existing wireless router. Click Next to continue. 3. Select the Wi-Fi network name (SSID) which you wish to connect to for the specified frequency and click Next to continue. If the Wi-Fi network you wish to connect to does not appear, try clicking Refresh. 16 To connect to a hidden SSID, check the Setup extender manually box and enter the details manually on the next page, as shown below. 4. Enter your existing wireless networks security key/password in the Security Key field and click Next to continue. 17 5. Wait a moment while the BR-6428nS V3/BR-6228nS V3 tests the wireless connection. 6. Select Obtain an IP address automatically or Use the following IP address for your BR-6428nS V3/BR-6228nS V3. If you are using a static IP, enter the IP address, subnet mask and default gateway. Click Next to proceed to the next step. Obtain an IP address automatically is the recommended setting for most users. The IP address will be displayed in brackets. 18 7. A summary of your configuration will be displayed, as shown below. Check that all of the details are correct and then click Next to proceed. The device will use the same wireless password/security key as the existing wireless network. If you wish to backup the BR-6428nS V3/BR-6228nS V3s settings, click Backup this configuration to open a new window and save your current configuration to a .txt file. 19 8. Please wait a moment until the BR-6428nS V3/BR-6228nS V3 is ready. 9. A final congratulations screen will indicate that setup is complete. You can now connect to the devices new SSID(s) which are shown on the screen then close the browser window. 20 10. The BR-6428nS V3/BR-6228nS V3 is working and ready for use. Refer to IV-2. Connecting to a Wi-Fi network if you require more guidance. 21 II-4. Wireless Bridge Mode 1. Select Wireless Bridge from the top menu and click Next. 2. Please ensure your BR-6428nS V3/BR-6228nS V3 is within Wi-Fi range of your existing wireless router. Click Next to continue. 3. Select the Wi-Fi network name (SSID) which you wish to connect to and click Next to continue. 22 If the Wi-Fi network you wish to connect to does not appear, try clicking Refresh. To connect to a hidden SSID, check the Setup extender manually box and enter the details manually on the next page, as shown below. 4. Enter your existing wireless networks security key/password in the Security Key field and click Next to continue. 23 5. Wait a moment while the BR-6428nS V3/BR-6228nS V3 tests the wireless connection. 7. Select Obtain an IP address automatically or Use the following IP address for your BR-6428nS V3/BR-6228nS V3. If you are using a static IP, enter the IP address, subnet mask and default gateway. Click Next to proceed to the next step. Obtain an IP address automatically is the recommended setting for most users. The IP address will be displayed in brackets. 24 8. A summary of your configuration will be displayed, as shown below. Check that all of the details are correct and then click Next to proceed. If you wish to backup the BR-6428nS V3/BR-6228nS V3s settings, click Backup this configuration to open a new window and save your current configuration to a .txt file. 25 9. Please wait a moment until the BR-6428nS V3/BR-6228nS V3 is ready. 10. A final congratulations screen will indicate that setup is complete. Please close the browser window. 26 11. The BR-6428nS V3/BR-6228nS V3 is working and ready for use. You can now connect the BR-6428nS V3/BR-6228nS V3 to your network device using an Ethernet cable and connect to your network as usual. 27 II-5. WISP Mode 1. Select WISP from the top menu and click Next. 2. Please ensure your BR-6428nS V3/BR-6228nS V3 is within Wi-Fi range of your WISP network and click Next to continue. 3. Select whether to use the iQ Setup wizard (recommended) to detect your Internet connection type, or enter the settings manually. 28 Manual configuration is only recommended for advanced users. continue. 5. Select the WISP SSID which you wish to connect to and click Next to If the Wi-Fi network you wish to connect to does not appear, try clicking Refresh. 29 To connect to a hidden SSID, check the Setup extender manually box and enter the details manually on the next page, as shown below. 6. Enter your existing wireless networks security key/password in the Security Key field and click Next to continue. 7. Wait a moment while the BR-6428nS V3/BR-6228nS V3 tests the wireless connection. 30 8. Click Next to continue your Internet service type configuration. 9. Wait a moment while the BR-6428nS V3/BR-6228nS V3 connects to the Internet. 31 10. When the Internet is connected, click Next to configure your wireless network. 11. Enter a name and password for your 2.4GHz wireless network, then click Next to continue. 32 12. A summary of your configuration will be displayed according to your connection type, as shown below. Check that all of the details are correct and then click Next to proceed. If you wish to backup the devices settings, click Backup this configuration to open a new window and save your current configuration to a .txt file. 33 13. Please wait a moment until the BR-6428nS V3/BR-6228nS V3 is ready. 14. A final congratulations screen will indicate that setup is complete. You can now connect to the devices new SSID(s) which are shown on the screen then close the browser window. 34 15. The BR-6428nS V3/BR-6228nS V3 is working and ready for use. Refer to IV-2. Connecting to a Wi-Fi network if you require more guidance. 35 II-6. WPS Setup If your wireless device supports WPS (Wi-Fi Protected Setup) then you can use this method to connect to the BR-6428nS V3/BR-6228nS V3s Wi-Fi network. 1. Press the WPS button on the BR-6428nS V3/BR-6228nS V3 for 2 5 seconds to activate WPS. The WLAN LED will flash to indicate that WPS is active. 2. Within two minutes, press the WPS button on the wireless device/client to activate its WPS. 3. The devices will establish a connection. Repeat for additional wireless devices. Please check the instructions for your wireless device for how long you need to hold down its WPS button to activate WPS. Reset to Factory Default Settings II-7. If you experience problems with your BR-6428nS V3/BR-6228nS V3, you can reset the device back to its factory settings. This resets all settings back to default. 1. Press and hold the WPS/Reset button found on the back panel for at least 10 seconds, until the power LED begins to flash. 2. Release the button when the power LED is flashing. 3. Wait for the BR-6428nS V3/BR-6228nS V3 to restart. The BR-6428nS V3/BR-6228nS V3 is ready for setup when the power LED displays on. 36 III. Browser Based Configuration Interface After you have setup the BR-6428nS V3/BR-6228nS V3 as detailed in II. Installation or the included Quick Installation Guide, you can use the browser based configuration interface to configure advanced settings. Please ensure that your computer is set to use a dynamic IP address. Refer to IV-1. Configuring your IP address for more information. Login III-1. 1. To access the browser based configuration interface enter http://edimax.setup into the URL bar of a browser on a network device connected to the same Wi-Fi network as the BR-6428nS V3/BR-6228nS V3. If you can not access http://edimax.setup, connect the device to a computer using an Ethernet cable and try again. 2. You will be prompted for a username and password. The default username is admin and the default password is 1234. 37 3. You will arrive at the Status screen. Use the menu down the left side to navigate. 38 III-2. Save Settings 1. After you configure any settings, click the Save Settings button at the bottom of the screen to save your changes. The device needs to restart in order to bring any changes into effect. 2. Then, click Click here to restart in order to restart the device and bring the changes into effect. 3. To make several changes at once, use the Save Settings button after each change and then click click here to restart after your final change. Only one restart is necessary as long as each change is saved with the Save Settings button. After you click click here to restart, all saved changes will come into effect. 39 III-3. Main Menu The main menu displays different options depending on your devices operating mode. For Range Extender mode: WPS please refer to 2.4GHz Wireless
WPS Wi-Fi Router Access Point Range Extender Wireless Bridge WISP 40 III-3-1. Status The Status page displays basic system information about the device, arranged into four categories:
System, LAN, Internet & 2.4GHz Wireless. Screenshots displayed are examples.The information shown on your screen will vary depending on your configuration. 41 III-3-2. Setup Wizard You can run the setup wizard again to reconfigure the basic settings of the device, or you can run a wizard to help you switch the device to a different operating mode. Select Setup Wizard or Switch to Router/AP/Range Extender/Wireless Bridge/WISP mode and then click Run Wizard to begin. Setup Wizard Switch to Router/Access Point/ Range Extender/
Wireless Bridge/ WISP mode This wizard will help you to set up the basic functions and settings of the device. For guidance about using the setup wizard, please refer to II. Installation. This wizard will help you to switch the device to a different operating mode: Wi-Fi router mode, access point mode, range extender, wireless bridge, or WISP mode (see below). Switch to Router/Access Point/ Range Extender/ Wireless Bridge/ WISP mode:
1. Follow the on-screen instructions to back up your current settings and then reset the device back to its factory default settings. 2. After the device has reset you will see the screen below. Close your browser and open it again. 42 3. Follow the on-screen wizard to setup your device in a different mode. Refer to II. Installation Step 3 onwards for help if needed. If you dont see the Get Started screen, try reconnecting to the edimax.setup SSID and go to http://edimax.setup in a web browser. 43 III-3-3. Internet/WISP The Internet menu provides access to WAN and DDNS settings. Click on an item from the submenu to view and/or configure the settings. In WISP mode, the screen below will be displayed:
Enable / Disable SSID Site Survey Security Setting Enable or disable your WISP connection. The name of the WISP network which your BR-6428nS V3/BR-6228nS V3 is connected to. Manually enter an SSID if you wish or use Site Survey below. Select wireless frequency and click Select Site List to open a new window and select your WISP network. Please refer to III-3-5-1. Basic for a description of security settings. 44 III-3-3-1. WAN Setup Select a Wide Area Network (WAN) connection mode and configure the settings. If you are unsure about your connection type, contact your ISP. In WISP mode, only Dynamic IP, Static IP & PPPoE are available for WAN Connection Mode. III-3-3-1-1. Dynamic IP Select Dynamic IP. If your Internet service provider assigns IP address automatically using DHCP (Dynamic Host Configuration Protocol). 45 Host Name MAC Address DNS Address Enter the host name of your computer. For some applications, you may need to designate a specific MAC address for the router. Please enter the MAC address here. If you are connecting the router to a computer, press Clone Mac to automatically enter your computers MAC address. Select Obtain an IP address automatically or Use the following IP address. Check with your ISP if you are unsure. DNS Address 1,2 & 3 Enter the DNS address(es) assigned by your DNS Proxy DNS Proxy Rules
(URL) MTU TTL ISP here. Enable or disable a DNS proxy server. When DNS proxy is enabled, enter the URL of a DNS proxy server. Enter the maximum transmission unit (MTU) value of your network connection. The default value is 1500. Enable/Disable time to live (TTL) function which limits the lifespan of network data to improve performance. Static IP III-3-3-1-2. Select Static IP if your ISP provides Internet access via a fixed IP address. Your ISP will provide you with such information as IP address, subnet mask, gateway address, and DNS address. 46 Fixed IP Address Subnet Mask Default Gateway Address MAC Address DNS Address 1, 2 &
3 DNS Proxy DNS Proxy Rules
(URL) TTL Input the IP address assigned by your ISP here. Input the subnet mask assigned by your ISP here. Input the default gateway assigned by your ISP here. Some ISPs may call this Default Route. For some applications, you may need to designate a specific MAC address for the router. Please enter the MAC address here. If you are connecting the router to a computer, press Clone Mac to automatically enter your computers MAC address. Enter the DNS address(es) assigned by your ISP here. Enable or disable a DNS proxy server. When DNS proxy is enabled, enter the URL of a DNS proxy server. Enable/Disable time to live (TTL) function which limits the lifespan of network data to improve performance. 47 III-3-3-1-3. PPPoE Select PPPoE if your ISP is providing you Internet access via PPPoE
(Point-to-Point Protocol over Ethernet). User Name Password MAC Address Enter the user name assigned by your ISP here. Enter the password assigned by your ISP here. For some applications, you may need to designate a specific MAC address for the router. Please enter the MAC address here. If you are connecting the router to a computer, press Clone Mac to automatically enter your computers MAC address. 48 DNS Address DNS Address 1, 2 &
3 DNS Proxy DNS Proxy Rules
(URL) Service Name MTU Connection Type Idle Time Out Enable Dual-WAN Access Select Obtain an IP address automatically or Use the following IP address. Check with your ISP if you are unsure. Enter the DNS address(es) assigned by your ISP here. Enable or disable a DNS proxy server. When DNS proxy is enabled, enter the URL of a DNS proxy server. Give this Internet service a name (optional). Enter the maximum transmission unit (MTU) value of your network connection. The default value is 1392. Specify a connection type:
1. Continuous: Connected all the time. 2. Connect on Demand: Connect when you initiate an Internet connection. 3. Manual: Connect/disconnect manually using the Connect and Disconnect buttons. Specify the amount of time the router waits before shutting down an idle connection. Only available when Connect on Demand
(above) is selected. Enable/disable dual WAN access. When you enable dual WAN access, select an IGMP source and enter a Host Name and MAC Address. 49 III-3-3-1-4. PPTP Select PPTP if your ISP is providing you Internet access via PPTP
(Point-to-Point Tunneling Protocol). Then select Obtain an IP address automatically or Use the following IP address depending on your ISP. Host Name MAC Address Enter the host name of your computer here If required. For some applications, you may need to designate a specific MAC address for the router. Please enter 50 Static IP Address Subnet Mask Default Gateway Address MAC Address DNS Address the MAC address here. If you are connecting the router to a computer, press Clone Mac to automatically enter your computers MAC address. Input the IP address assigned by your ISP here. Input the subnet mask assigned by your ISP here. Input the default gateway assigned by your ISP here. Some ISPs may call this Default Route. If your ISP filters access by MAC addresses, enter your computers MAC address here. Click Clone MAC to automatically enter your computers MAC address. Select Obtain an IP address automatically or Use the following IP address. Check with your ISP if you are unsure. DNS Address 1,2 & 3 Enter the DNS address(es) assigned by your ISP DNS Proxy DNS Proxy Rules
(URL) User ID Password PPTP Gateway Connection ID MTU BEZEQ-ISRAEL Connection Type Idle Time Out here. Enable or disable a DNS proxy server. When DNS proxy is enabled, enter the URL of a DNS proxy server. Input the user name assigned by your ISP here. Input the password assigned by your ISP here. Input the PPTP gateway assigned by your ISP here. Specify a reference name/ID for the connection. Enter the maximum transmission unit (MTU) value of your network connection. The default value is 1392. Check the Enable box if you are using BEZEQ network services (Israel users only). Specify a connection type:
1. Continuous: Connected all the time. 2. Connect on Demand: Connect when you initiate an Internet connection. 3. Manual: Connect/disconnect manually using the Connect and Disconnect buttons. Specify the amount of time the router waits before shutting down an idle connection. Only available when Connect on Demand (above) is selected. 51 L2TP III-3-3-1-5. Select L2TP if your ISP is providing you Internet access via L2TP (Layer 2 Tunneling Protocol). Host Name MAC Address Enter the host name of your computer here If required. For some applications, you may need to designate a specific MAC address for the router. Please enter the MAC address here. If you are connecting the router to a computer, press Clone Mac to automatically enter your computers MAC address. 52 Static IP Address Subnet Mask Default Gateway Address MAC Address DNS Address Input the IP address assigned by your ISP here. Input the subnet mask assigned by your ISP here. Input the default gateway assigned by your ISP here. Some ISPs may call this Default Route. If your ISP filters access by MAC addresses, enter your computers MAC address here. Click Clone MAC to automatically enter your computers MAC address. Select Obtain an IP address automatically or Use the following IP address. Check with your ISP if you are unsure. DNS Address 1,2 & 3 Enter the DNS address(es) assigned by your ISP DNS Proxy DNS Proxy Rules
(URL) User ID Password L2TP Gateway Connection ID MTU Connection Type Idle Time Out here. Enable or disable a DNS proxy server. When DNS proxy is enabled, enter the URL of a DNS proxy server. Input the user name assigned by your ISP here. Input the password assigned by your ISP here. Input the L2TP gateway assigned by your ISP here. Specify a reference name/ID for the connection. Enter the maximum transmission unit (MTU) value of your network connection. The default value is 1392. Specify a connection type:
1. Continuous: Connected all the time. 2. Connect on Demand: Connect when you initiate an Internet connection. 3. Manual: Connect/disconnect manually using the Connect and Disconnect buttons. Specify the amount of time the router waits before shutting down an idle connection. Only available when Connect on Demand (above) is selected. 53 III-3-3-1-6. WISP Select WISP if you use a wireless internet service from Internet Service Provider (WISP). WISP SSID Select Site Survey Channel Number Security Settings Enable or disable the WISP function. Enter the SSID of the WISP network, or click Select Site Survey below to view all available networks in a new window and select the WISP network from there. Click Select Site Survey to display all available wireless SSIDs in a new window and select your WISP network. Enter the channel number of the WISP network. Enter the security information required by your ISP. 54 III-3-3-2. DDNS Dynamic DNS (DDNS) is a service which provides a hostname-to-IP service for dynamic IP users. The changing nature of dynamic IPs means that it can be difficult to access a service provided by a dynamic IP user; a DDNS service though can map such dynamic IP addresses to a fixed hostname, for easier access. The router supports several DDNS service providers, for more details and to register for a DDNS account please visit the DDNS providers website(s), examples of which are listed below. Enable/Disable Provider Domain Name Account/Email Password/Key Enable or disable DDNS Select DDNS service provider. Enter the domain name provided by the DDNS provider. Please enter the DDNS registration account/email. Enter the DDNS service password/key. The following DDNS services are supported:
3322 DHS DynDNS ODS TZO GnuDIP DyNS ZoneEdit CyberGate http://cybergate.planex.co.jp/ddns/
http://www.3322.org http://www.dhs.org http://www.dyndns.org http://ods.org http://www.tzo.com http://gnudip2.sourceforge.net http://www.dyns.cx/
http://www.zoneedit.com 55 http://www.ns2go.com/
http://www.noip.com/
NS2GO NO-IP 56 III-3-4. LAN You can configure your Local Area Network (LAN) on this page. You can enable the router to dynamically allocate IP addresses to your LAN clients, and you can modify the IP address of the device. The devices default IP address is 192.168.2.1. You can access the browser based configuration interface using the devices IP address instead of using the URL http://edimax.setup. IP Address Subnet Mask 802.1d Spanning Tree DHCP Server Lease Time Specify the IP address here. This IP address will be assigned to the BR-6428nS V3/BR-6228nS V3 and will replace the default IP address. Specify a subnet mask. The default value is 255.255.255.0 Select Enable or Disable to enable/disable 802.1d Spanning Tree. This creates a tree of connected layer-2 bridges (typically Ethernet switches) within a mesh network, and disables those links that are not part of the tree, leaving a single active path between any two network nodes. Enable or disable the DHCP server. Select a lease time for the DHCP leases here. The DHCP client will obtain a new IP address after the period expires. Your devices DHCP server automatically assigns IP addresses to computers on its network, between a defined range of numbers. 57 Start IP End IP Enter the start IP address for the DHCP servers IP address leases. Enter the end IP address for the DHCP servers IP address leases. Your devices DHCP server can be configured to assign static (fixed) IP addresses to specified network devices, identified by their unique MAC address. Enable Static DHCP Leases MAC Address IP Address Add Clear Delete Selected /
Delete All Enable/disable static DHCP leases. This must be enabled in order to assign any network device a static IP address. Enter the specified network devices MAC address here. Assign a fixed IP address for the specified network device here. Add the information to the Static DHCP Leases Table. Clear the MAC address and IP address fields. Delete selected or all entries from the table. The LAN IP page will be displayed as below when your device is set to access point mode. You can set theBR-6428nS V3/BR-6228nS V3 to obtain an IP address automatically or you can specify an IP address. 58 59 III-3-5. 2.4GHz Wireless The 2.4GHz Wireless menu allows you to configure SSID and security settings for your Wi-Fi network along with a guest Wi-Fi network. WPS, access control and scheduling functions can also be managed from here. Access Point Mode:
In Access Point mode, the Guest feature in the menu is replaced by Multiple SSID. III-3-5-1. Basic The Basic screen displays settings for your primary 2.4GHz Wi-Fi network. Disable Wireless Mode Check the box to disable the wireless function of your device. Keep the default AP value for the device to act as a standard wireless access point, or 60 Band Wireless Network Name (SSID) Broadcast SSID Enable Wireless Clients Isolation Channel Number Site Survey Wireless Clients select AP Bridge-WDS for the device to function in WDS mode (see below). Displays the wireless standard used for the BR-6428nS V3/BR-6228nS V3s 2.4GHz
(B+G+N) means that 802.11b, 802.11g, and 802.11n wireless clients can connect to the BR-6428nS V3/BR-6228nS V3. This is the name of your Wi-Fi network for identification, also sometimes referred to as SSID. The SSID can consist of any combination of up to 32 alphanumerical characters. Enable or disable SSID broadcast. When enabled, the SSID will be visible to clients as an available Wi-Fi network. When disabled, the SSID will not be visible as an available Wi-Fi network to clients clients must manually enter the SSID in order to connect. A hidden (disabled) SSID is typically more secure than a visible (enabled) SSID. Check the box to enable wireless clients isolation. This prevents wireless clients connected to the BR-6428nS V3/BR-6228nS V3 from communicating with each other and improves security. Typically, this function is useful for corporate environments or public hot spots and can prevent brute force attacks on clients usernames and passwords. Select a wireless radio channel or use the default Auto setting from the drop-down menu. Click Select Site List to display a new window showing information about the surrounding wireless environment. This information is useful to select an effective wireless channel number. Click Show List to display a new window showing information about wireless clients. Please disable any pop-up blockers if you have difficulty using this function. 61 AP Bridge-WDS:
Wireless Distribution System (WDS) can bridge/repeat access points together in an extended network. WDS settings can be configured as shown below. When using WDS, configure the IP address of each access point to be in the same subnet and ensure there is only one active DHCP server among connected access points, preferably on the WAN side. WDS must be configured on each access point, using correct MAC addresses. All access points should use the same wireless channel. MAC Address 1 - 4 Set Security Enter the correct MAC address for other access points in WDS mode. Click Set Security to open a new window and enter the security settings for WDS
(shown below). Click Save when finished. Please ensure you setup and save wireless security settings before you click Set Security to set WDS security settings. 62 Wireless Security:
Select an encryption type from the drop-down menu:
WPA Pre-shared Key is the recommended and most secure encryption type. In WISP mode, WPA RADIUS is unavailable for the wireless band that is used to connect to WISPs AP. 63 III-3-5-1-1. Disable Encryption is disabled and no password/key is required to connect to the BR-6428nS V3/BR-6228nS V3. Disabling wireless encryption is not recommended. When disabled, anybody within range can connect to your devices SSID. Enable 802.1x Authentication Check the box to enable the 802.1x authentication. A RADIUS server is required to perform 802.1x authentication: enter the RADIUS servers information in the relevant fields (below). 64 III-3-5-1-2. WEP WEP (Wired Equivalent Privacy) is a basic encryption type. For a higher level of security consider using WPA encryption. Key Length Key Format Encryption Key Enable 802.1x Authentication Select 64-bit or 128-bit. 128-bit is more secure than 64-bit. Choose from ASCII (any alphanumerical character 0-9, a-z and A-Z) or Hex (any characters from 0-9, a-f and A-F). Enter your encryption key/password according to the format you selected above. A complex, hard-to-guess key is recommended. Check the Hide box to hide your password from being displayed on-screen. Check the box to enable the 802.1x authentication. A RADIUS server is required to perform 802.1x authentication: enter the RADIUS servers information in the relevant fields (below). 65 III-3-5-1-3. WPA Pre-Shared Key WPA pre-shared key is the recommended and most secure encryption type. WPA Unicast Cipher Suite Pre-shared Key Format Pre-shared Key Select from WPA (TKIP), WPA2 (AES) or WPA2 Mixed. WPA2 (AES) is safer than WPA (TKIP), but not supported by all wireless clients. Please make sure your wireless client supports your selection. WPA2 (AES) is recommended followed by WPA2 Mixed if your client does not support WPA2 (AES). Choose from Passphrase (8-63 alphanumeric characters) or Hex (up to 64 characters from 0-9, a-f and A-F). Please enter a key according to the format you selected above. A complex, hard-to-guess key is recommended. Check the Hide box to hide your password from being displayed on-screen. 66 III-3-5-1-4. WPA Radius WPA RADIUS is a combination of WPA encryption and RADIUS user authentication. If you have a RADIUS authentication server, you can authenticate the identity of every wireless client against a user database. WPA Unicast Cipher Suite RADIUS Server IP address RADIUS Server Port RADIUS Server Password Select from WPA (TKIP), WPA2 (AES) or WPA2 Mixed. WPA2 (AES) is safer than WPA (TKIP), but not supported by all wireless clients. Please make sure your wireless client supports your selection. WPA2 (AES) is recommended followed by WPA2 Mixed if your client does not support WPA2 (AES). Input the IP address of the RADIUS authentication server here. Input the port number of the RADIUS authentication server here. The default value is 1812. Input the password of the RADIUS authentication server here. 67 III-3-5-2. Guest/ Multiple SSID You can setup an additional Guest Wi-Fi network so guest users can enjoy Wi-Fi connectivity without accessing your primary network. The Guest screen displays settings for your guest Wi-Fi network. The guest network is separate from your primary network. The settings for your primary network can be found in the Basic menu. In access point mode, the Guest feature in the menu is replaced by Multiple SSID. The BR-6428nS V3/BR-6228nS V3 supports up to four additional SSIDs for each wireless band in access point mode. 802.1x authentication is unavailable in WISP mode for the wireless band that is used to connect to WISPs AP. Enable Guest SSID Wireless Guest Name Enable Wireless Clients Isolation Check/uncheck the box to enable/disable the guest Wi-Fi network. Enter a reference/ID name for your guest wireless network. Check the box to enable wireless clients isolation. This prevents wireless clients connected to the BR-6428nS V3/BR-6228nS V3 from communicating with each other and improves security. Typically, this function is useful for corporate environments or public hot spots and can prevent brute force attacks on clients usernames and passwords. 68 Band Channel Number Displays the wireless standard used for the BR-6428nS V3/BR-6228nS V3s frequency band:
2.4GHz (B+G+N): Allows 802.11b, 802.11g, and 802.11n wireless clients to connect to the BR-6428nS V3/BR-6228nS V3. Channel number for the guest network is the same as the main SSID and cannot be adjusted independently. Encryption Please refer to III-3-5-1. Basic: Wireless Security for details about security settings. WPA RADIUS encyrption type is not available for the guest network. MULTIPLE SSID:
The BR-6428nS V3/BR-6228nS V3 supports up to four additional SSIDs for each wireless band in access point mode. Once configured, these SSIDs are displayed in the Multiple SSID Status table as shown below. Use the Multiple SSID Basic Settings box to configure additional SSIDs. 69 Multiple SSID Wireless Network Name (SSID) Enable Multiple SSID Enable Wireless Clients Isolation Band Channel Number VLAN ID Use the drop down menu to select which SSID
( numbered 1 4) to configure. Enter a reference/ID name to separate your wireless network. Check/uncheck this box to enable/disable the specified SSID. Must be checked for the SSID to function. Check the box to enable wireless clients isolation. This prevents wireless clients connected to the BR-6428nS V3/BR-6228nS V3 from communicating with each other and improves security. Typically, this function is useful for corporate environments or public hot spots and can prevent brute force attacks on clients usernames and passwords. Displays the wireless standard used for the BR-6428nS V3/BR-6228nS V3s frequency band:
2.4GHz (B+G+N): Allows 802.11b, 802.11g, and 802.11n wireless clients to connect to the BR-6428nS V3/BR-6228nS V3. Channel number for the guest network is the same as the main SSID and cannot be adjusted independently. Set a VLAN ID for the specified SSID (see below). A VLAN is a local area network which maps workstations virtually instead of physically and allows you to group together or isolate users from each other. VLAN IDs 1 4094 are supported. 70 III-3-5-3. WPS Wi-Fi Protected Setup is a simple way to establish connections between WPS compatible devices. WPS can be activated on compatible devices by pushing a WPS button on the device or from within the devices firmware/configuration interface. When WPS is activated in the correct manner and at the correct time for two compatible devices, they will automatically connect. PIN code WPS includes the use of a PIN code between the two devices for verification. Enable WPS WPS Status Self PIN Code Check/uncheck this box to enable/disable WPS. Displays Configured or unConfigured depending on whether WPS and SSID/security settings for the device have been configured or not, either manually or using the WPS button. Displays the WPS PIN code of the device. SSID Displays the SSID of the device. Authentication Mode Authentication Key Displays the wireless security authentication Displays the wireless security authentication mode of the device. Configuration Mode key. The configuration mode of the devices WPS setting is displayed here. Registrar means the device acts as an access point for a wireless client to connect to and the wireless client(s) will follow the devices wireless settings. 71 Configure via Push Button Configure via Client PIN Code Click Start PBC (Push-Button Configuration) to activate WPS on the access point. WPS will be active for 2 minutes. Enter the wireless clients PIN code here and click Start PIN to activate PIN code WPS. Refer to your wireless clients documentation if you are unsure of its PIN code. III-3-5-4. Access Control Access Control is a security feature that can help to prevent unauthorized users from connecting to your wireless router. This function allows you to define a list of network devices permitted to connect to the BR-6428nS V3/BR-6228nS V3. Devices are each identified by their unique MAC address. If a device which is not on the list of permitted MAC addresses attempts to connect to the BR-6428nS V3/BR-6228nS V3, it will be denied. To enable this function, check the box labeled Enable Wireless Access Control. MAC address Select a PC name from the drop-down list and click >> to add enter it into the blank field to the right. Click Refresh in the drop-down menu to refresh the list of available MAC addresses. If the address you wish to add is not listed, enter 72 it manually. Enter a MAC address of computer or network device manually without dashes or colons e.g. for MAC address aa-bb-cc-dd-ee-ff enter aabbccddeeff. Enter a comment for reference/identification consisting of up to 16 alphanumerical characters. Click Add to add the MAC address to the MAC address filtering table. Comment Add MAC address entries will be listed in the table as shown below. Select an entry using the Select checkbox. Delete selected or all entries from the table. Delete Selected/
Delete All 73 III-3-5-5. Schedule The schedule feature allows you to automate the wireless radio to switch on/off at specified times. Multiple schedules can be configured. Check/uncheck the box Enable Schedule Settings to enable/disable the wireless on/off scheduling function. The BR-6428nS V3/BR-6228nS V3 must remain connected to the Internet and use an NTP server for the schedule feature to function correctly. Wireless scheduling can save energy and increase the security of your network. 1. Use the checkboxes to select which day(s) to include in the schedule. 2. Specify a time (hour and minute) for the schedule using the drop-down menu. 3. Select which command applies to this schedule from the drop-down menu, either Wireless On or Wireless Off. 74 Add Add the schedule to the table of active schedules. Active schedules will be displayed in the table as shown below. Select an entry using the Select checkbox. Delete Selected/
Delete All Delete selected or all entries from the table. 75 III-3-6. Firewall The Firewall menu provides access to URL blocking, access control, DMZ and DoS functions to improve the security of your wireless network. SPI firewall Enable or disable the Stateful Packet Inspection (SPI) firewall. III-3-6-1. URL Blocking This function can block Internet access by either specific URLs or keywords. Check/uncheck the Enable URL Blocking box to enable/disable URL blocking. 76
| 1 | User Manual part 2 of 2 revised | Users Manual | 3.20 MiB |
URL/Keyword Add Enter the URL or keyword to be blocked. Add the URL or keyword to the blocked table. Blocked URLs/keywords entries will be listed in the table as shown below. Select an entry using the Select checkbox. Delete Selected /
Delete All Delete selected or all entries from the table. 77 III-3-6-2. Access Control Access Control (MAC filtering) can also be configured from III-3-5-4. Access Control. Access Control is a security feature that can help to prevent unauthorized users from connecting to your wireless router. This function allows you to define a list of network devices permitted or denied to connect to the BR-6428nS V3/BR-6228nS V3. Devices are each identified by their unique MAC address or IP address. Specific services can also be allowed/denied for IP addresses. Check/uncheck the Enable MAC Filtering and/or Enable IP Filtering box to enable/disable MAC filtering and/or IP filtering. 78 MAC Filtering:
Enable MAC Filtering Client PC MAC Address Computer Name Comment Add Check the box to enable MAC filtering and select whether to Deny or Allow access for specified MAC address. Enter a MAC address of computer or network device manually without dashes or colons e.g. for MAC address aa-bb-cc-dd-ee-ff enter aabbccddeeff. Select a computer name from the drop-down list and click << to add its MAC address into the Client PC Mac Address field. Click Refresh in the drop-down menu to refresh the list of available MAC addresses. If the address you wish to add is not listed, enter it manually. Enter a comment for reference/identification consisting of up to 16 alphanumerical characters. Click Add to add the MAC address to the MAC address filtering table. MAC address entries will be listed in the table as shown below. Select an entry using the Select checkbox. Delete Selected /
Delete All Delete selected or all entries from the table. 79 IP Filtering:
Enable IP Filtering Add PC Check the box to enable IP filtering and select whether to Deny or Allow access for specified IP address. Opens a new window to add a new IP to the list, to deny or allow access/services according to above. 80 Protocol Service Name Enter a description for reference/identification of up to 16 alphanumeric characters. Client PC Description Client PC IP address Enter a starting IP address in the left field and the end IP address in the right field to define a range of IP addresses; or enter an IP address in the left field only to define a single IP address. Various services are listed here with a short description. Check/uncheck the box for each service you wish to select. Select protocol TCP or UDP or Both for a service not included in the Client PC Service list. Enter the port range for the service not included in the Client PC Service list. Enter a single port number e.g. 110, a range of port numbers e.g. 110-120, or multiple port numbers separated by a comma e.g. 110,115,120. Click Add to add selected services or a user defined service to the IP filtering table. Port Range Add IP filtering entries will be listed in the IP filtering table shown below. Delete Selected/
Delete All Delete selected or all entries from the table. 81 III-3-6-3. DMZ A Demilitarized Zone (DMZ) is an isolated area in your local network where private IP addresses are mapped to specified Internet IP addresses, allowing unrestricted access to the private IP addresses but not to the wider local network. You can define a virtual DMZ host here. This is useful for example, if a network client PC cannot run an application properly from behind an NAT firewall, since it opens the client up to unrestricted two-way access. Enable DMZ Public Client PC Computer Name Add Check/uncheck the box to enable/disable the devices DMZ function. Select Dynamic IP or Static IP here. For Dynamic IP select an Internet connection session from dropdown menu. For Static IP enter the IP address that you want to map to a specific private IP address. Enter the private IP address that the internet IP address will be mapped to. Select a computer name from the list and click
<< to enter its IP address into the Client PC field (above). Click Add to add the client to the Current DMZ Table. 82 DMZ entries will be displayed in the table shown below:
Delete Selected/
Delete All Delete selected or all entries from the table. III-3-6-4. DoS Denial-of-Service (DoS) is a common form of malicious attack against a network. The routers firewall can protect against such attacks. If you are not familiar with these functions, it is recommended you keep the default settings. 83 Ping of Death Discard Ping from WAN Port Scan Sync Flood Specify the frequency of ping of death packets which will trigger the routers DoS protection function. Check this box and the router will not answer ping requests from the Internet. Intruders use port scanners to detect open Internet IP address ports. Check each type of port scan to prevent. Specify the frequency of sync flood packets which will trigger the DoS protection function. 84 III-3-7. QoS Quality of Service (QoS) is a feature to manage Internet bandwidth efficiently. Some applications require more bandwidth than others to function properly, and QoS allows you to ensure that sufficient bandwidth is available. Minimum or maximum bandwidth can be guaranteed for a specified application. QoS can improve the BR-6428nS V3/BR-6228nS V3s performance. QoS is recommended to optimize performance for online gaming. III-3-7-1. QoS Check/uncheck the box Enable QoS to enable/disable the QoS function. Click Add to open a new window and setup a QoS rule. The Current QoS Table displays all QoS rules. Total Download Bandwidth Total Upload Bandwidth Add Enter your total download bandwidth limit from your Internet service provider (ISP) in kbits. Enter your total upload bandwidth limit from your Internet service provider (ISP) in kbits. Opens a new window to add a new QoS rule to the current QoS table. 85 Rule Name Bandwidth Local IP Address Enter a name for the QoS rule for reference/identification. Set the bandwidth limits for the QoS rule:
(1) (2) (3) 1. Select Download or Upload for the QoS rule. 2. Enter the bandwidth limit. 3. Select whether the bandwidth is a Guarantee (minimum) or Max
(maximum). Enter the IP address range to which the QoS rule will be applied. Enter a starting IP address in the left field and the end IP address in the right field to define a range of IP addresses; or enter an IP address in the left field only to define a single IP address. 86 Local Port Range Remote IP Address Remote Port Range Traffic Type Protocol Save Enter the port range to activate the QoS rule. Enter a single port number e.g. 110 or a range of port numbers e.g. 110-120 Enter the remote IP address range which will activate the QoS rule. Enter a starting IP address in the left field and the end IP address in the right field to define a range of IP addresses; or enter an IP address in the left field only to define a single IP address. Enter the remote port range to activate the QoS rule. Enter a single port number e.g. 110 or a range of port numbers e.g. 110-120 Select traffic type as an alternative to specifying a port range above. Select a TCP or UDP protocol type. Click add button to add a new QoS rule
(detailed instructions will be given below). QoS rule entries will be listed in the Current QoS Table as shown below. Select a rule using the Select checkbox. When using the Edit button only one rule can be selected each time. QoS rules will be processed in the order that they are listed i.e. the rule at the top of the list will be applied first, and then the second rule etc. The order can be adjusted using the Move Up/Down buttons. Edit Delete Selected/
Delete All Move Up/Down Edit a selected rule. Delete selected or all entries from the table. Move selected rule up or down the list. 87 iQoS III-3-7-2. iQoS is a more intuitive and automated tool to manage internet bandwidth than manually configuring the settings using QoS. For online gamers or users with bandwidth requirements for audio/video, iQoS is a useful function. iQoS cannot be used in conjunction with QoS and vice-versa. When one is enabled, the other is automatically disabled. Check/uncheck the box Enable iQoS to enable/disable the iQoS function, and then enter your bandwidth limits and arrange the network application icons in priority order in the Current iQoS Table. Icons with higher priority will be assigned bandwidth more efficiently for better performance. Total Download Bandwidth Total Upload Bandwidth Enter your total download bandwidth limit from your Internet service provider (ISP) in kbits. Enter your total upload bandwidth limit from your Internet service provider (ISP) in kbits. 88 The icons represent the following categories:
Internet Browsing P2P/BT Downloads FTP Multimedia Online Gaming The iQoS table is ordered left to right, high to low priority. Click a small icon below the table to insert it into the table, and click a large icon in the table to remove it. All spaces in the priority table must be filled. 89 III-3-8. Advanced Advanced features of the BR-6428nS V3/BR-6228nS V3 can be configured from the Advanced menu. III-3-8-1. Static Routing Static routing is a method of configuring path selection of routers, characterized by the absence of communication between routers regarding the current topology of the network. The opposite of static routing is dynamic routing, sometimes also referred to as adaptive routing. You can configure static routing and manually add routes to the routing table shown below. Enable Static Routing Check/uncheck the box to enable/disable Destination LAN IP Subnet Mask static routing. Enter the destination networks IP address. Enter the subnet mask of the destination network. 90 Default Gateway Hop Count Interface Add Enter the default gateway of the destination network. Enter the hop count (the distance between destination network and this broadband router) here. Enter the interface which leads to destination network. Add the route to the current static routing table. Static Routing Table entries will be displayed in the table shown below:
Delete Selected/
Delete All Delete selected or all entries from the table. III-3-8-2. Port Forwarding This function allows you to redirect a single port or consecutive ports of an Internet IP address to the same port of a local IP address. The port number(s) of the Internet IP address and local IP address must be the same. If the port number of the Internet IP address and local IP address is different, please use the Virtual Server function instead. 91 Private IP Computer Name Type Port Range Comment Enter the IP address of the computer on the local network. Windows computers on the local network will be listed here select a computer from the list and click << to automatically add the IP address to the Private IP field. Select the type of connection, TCP, UDP or Both. Input the starting port number in the left field, and input the ending port number in the right field. If you only want to redirect a single port number, only enter a port number in the left field. Enter a comment for reference or identification. Port Forwarding Table entries will be displayed in the table shown below:
Delete Selected/
Delete All Delete selected or all entries from the table. 92 III-3-8-3. Virtual Server This function allows you to set up an internet service on a local computer, without exposing the local computer to the internet. You can also build various sets of port redirection, to provide various internet services on different local computers via a single internet IP address. Private IP Computer Name Private Port Type Public Port Comment Specify the IP address of the computer on your local network. Select the name of a Windows computer from the drop-down menu and click to auto-input its IP address in the Private IP field. Specify the private port you wish to use on the computer in your local network. Select the type of Internet Protocol. Specify a public port to access the computer on your local network. Enter a comment for reference or identification. Current Virtual Table entries will be displayed in the table shown below:
93 Delete Selected/
Delete All Delete selected or all entries from the table. III-3-8-4. 2.4GHz Wireless These settings are for experienced users only. Please do not change any of the values on this page unless you are already familiar with these functions. Fragment Threshold RTS Threshold Beacon Interval DTIM Period Data Rate N Data Rate Set the Fragment threshold of the wireless radio. The default value is 2346. Set the RTS threshold of the wireless radio. The default value is 2347. Set the beacon interval of the wireless radio. The default value is 100. Set the DTIM period of wireless radio. The default value is 3. Set the wireless data transfer rate. The default is set to Auto. Set the data rate of 802.11n. The default is set to Auto. 94 Channel Width Preamble Type CTS Protect Tx Power WMM Select wireless channel width (bandwidth used by wireless signals from the device) the recommended value is Auto 20/40MHz. Set the wireless radio preamble type. The default value is Short Preamble. Enabling this setting will reduce the chance of radio signal collisions between 802.11b and 802.11g wireless access points. Its recommended to set this option to Auto. Set the power output of the wireless radio. You may not require 100% output power. Setting a lower power output can enhance security since potentially malicious/unknown users in distant areas will not be able to access your signal. WMM (Wi-Fi Multimedia) technology can improve the performance of certain network applications, such as audio/video streaming, network telephony (VoIP) and others. When WMM is enabled, the device will prioritize different kinds of data and give higher priority to applications which require instant responses for better performance. 95 IGMP III-3-8-5. IGMP is a communications protocol used to establish multicast group memberships. It allows for a more efficient use of resources and better performance for applications such as IPTV video streaming. IGMP Snooping IGMP Proxy IGMP snooping monitors traffic between hosts and multicast routers to facilitate bandwidth conservation. Select enable or disable. IGMP proxy enables intelligent multicast forwarding based on IGMP snooping information. Select enable or disable. It is recommended to set IGMP Snooping and IGMP Proxy to Enable. 96 III-3-8-6. UPnP Universal plug-and-play (UPnP) is a set of networking protocols which enables network devices to communicate and automatically establish working configurations with each other. Select Enable or Disable. 97 III-3-9. Administration Various administrative functions can be accessed from the Administration menu. III-3-9-1. Time Zone Set Time Zone Time Server Address Daylight Saving Select the time zone of your country or region. The travel router supports NTP (Network Time Protocol) for automatic time and date setup. Input the host name of the IP server manually. If your country/region uses daylight saving time, please check the Enable Function box, and select the start and end date. 98 III-3-9-2. Password You can change the password used to login to the browser-based configuration interface here. It is advised to do so for security purposes. Please make a note of the new password. In the event that you forget the password and are unable to login to the browser based configuration interface, see II-7. Reset to factory default settings for how to reset the device. Current Password New Password Confirmed Password Confirm your new password. Enter your current password. Enter your new password. 99 III-3-9-3. Remote Access Check Enabled to enable the remote access feature and then enter the appropriate values. Host IP Address Port Specify the IP address which is allowed remote access. Specify a port number (065535) used for remote access. 100 III-3-9-4. Backup/Restore Backup Settings Restore Settings Restore to Factory Default Click Save to save the current settings on your computer as config.bin file. Click Browse to find a previously saved config.bin file and then click Upload to replace your current settings. Click Reset to restore settings to the factory default. A pop-up window will appear and ask you to confirm and enter your log in details. Enter your username and password and click Ok. See below for more information. III-3-9-5. Upgrade The upgrade page allows you to upgrade the system firmware to a more recent version. You can download the latest firmware from the Edimax website. After the upgrade, the system will restart. Do not switch off or disconnect the device during a firmware upgrade, as this could damage the device. It is recommended that you use a wired Ethernet connection for a firmware upgrade. 101 III-3-9-6. Restart In the event that the router malfunctions or is not responding, then it is recommended that you restart the device. III-3-9-7. Logs You can view the system log and security log here. Use the drop down menu in the top-right corner to select which log to view. 102 Save Clear Refresh Click Save to save the log on your computer as .txt file. Click Clear to clear/erase the existing log. Click Refresh to refresh the log and update any activity. III-3-9-8. Active DHCP Client Information about active DHCP clients is shown in the table, which displays the DHCP server assigned IP address, MAC address and time expired for each computer or device on the local network. III-3-9-9. Statistics Displays sent and received packet network statistics. 103 IV. Appendix IV-1. Configuring your IP address For first time access to the URL http://Edimax.Setup please ensure your computer is set to use a dynamic IP address. This means your computer can obtain an IP address automatically from a DHCP server. You can check if your computer is set to use a dynamic IP address by following IV-1-1. How to check that your computer uses a dynamic IP address. Static IP users can also temporarily modify your computers IP address to be in the same IP address subnet e.g. 192.168.2.x (x = 3 254) as the BR-6428nS V3/BR-6228nS V3 in order to access http://Edimax.Setup. The BR-6428nS V3/BR-6228nS V3s default IP address is 192.168.2.1. The procedure for modifying your IP address varies across different operating systems; please follow the guide appropriate for your operating system in IV-1-2. How to modify the IP address of your computer. Static IP users please make a note of your static IP before you change it. You can assign a new IP address to the device which is within the subnet of your network during setup or using the browser based configuration interface
(refer to III-3-4. LAN). Then you can access the URL http://Edimax.Setup in future without modifying your IP address. Please remember to change your IP address back to its original value after the device is properly configured. 104 IV-1-1. How to check that your computer uses a dynamic IP address Please follow the instructions appropriate for your operating system. IV-1-1-1. Windows XP 1. Click the Start button (it should be located in the lower-left corner of your computer), then click Control Panel. Double-click the Network and Internet Connections icon, click Network Connections, and then double-click Local Area Connection. The Local Area Connection Status window will then appear, click Properties. 2. Obtain an IP address automatically and Obtain DNS server address automatically should be selected. 105 106 IV-1-1-2. Windows Vista 1. Click the Start button (it should be located in the lower-left corner of your computer), then click Control Panel. Click View Network Status and Tasks, then click Manage Network Connections. Right-click Local Area Network, then select Properties. The Local Area Connection Properties window will then appear, select Internet Protocol Version 4 (TCP / IPv4), and then click Properties. 2. Select Obtain an IP address automatically and Obtain DNS server address automatically should be selected. 107 108 IV-1-1-3. Windows 7 1. Click the Start button (it should be located in the lower-left corner of your computer), then click Control Panel. 2. Under Network and Internet click View network status and tasks. 3. Click Local Area Connection. 109 4. Click Properties. 5. Select Internet Protocol Version 4 (TCP/IPv4) and then click Properties. 110 6. Select Obtain an IP address automatically and Obtain DNS server address automatically should be selected. 111 IV-1-1-4. Windows 8 1. From the Windows 8 Start screen, you need to switch to desktop mode. Move your curser to the bottom left of the screen and click. 2. In desktop mode, click the File Explorer icon in the bottom left of the screen, as shown below. 3. Right click Network and then select Properties. 112 4. In the window that opens, select Change adapter settings from the left side. 5. Choose your connection and right click, then select Properties. 113 6. Select Internet Protocol Version 4 (TCP/IPv4) and then click Properties. 7. Select Obtain an IP address automatically and Obtain DNS server address automatically should be selected. 114 115 IV-1-1-5. Mac OS 1. Have your Macintosh computer operate as usual, and click on System Preferences. 2. In System Preferences, click on Network. 3. Click on Wi-Fi in the left panel and then click Advanced in the lower right corner. 4. Select TCP/IP from the top menu and Using DHCP in the drop down menu labeled Configure IPv4 should be selected. 116 117 IV-1-2. How to modify the IP address of your computer Please follow the instructions appropriate for your operating system. In the following examples we use the IP address 192.168.2.10 though you can use any IP address in the range 192.168.2.x (x = 3 254) in order to access iQ Setup/browser based configuration interface. Please make a note of your static IP before you change it. IV-1-2-1. Windows XP 1. Click the Start button (it should be located in the lower-left corner of your computer), then click Control Panel. Double-click the Network and Internet Connections icon, click Network Connections, and then double-click Local Area Connection. The Local Area Connection Status window will then appear, click Properties. 2. Select Use the following IP address and Use the following DNS server addresses, then input the following values:
118 Your existing static IP address will be displayed in the IP address field before you replace it. Please make a note of this IP address, subnet mask, default gateway and DNS server addresses. IP address: 192.168.2.10 Subnet Mask: 255.255.255.0 Preferred DNS Server: 192.168.2.1 Click OK when finished. 119 IV-1-2-2. Windows Vista 1. Click the Start button (it should be located in the lower-left corner of your computer), then click Control Panel. Click View Network Status and Tasks, then click Manage Network Connections. Right-click Local Area Network, then select Properties. The Local Area Connection Properties window will then appear, select Internet Protocol Version 4 (TCP / IPv4), and then click Properties. 2. Select Use the following IP address and Use the following DNS server addresses, then input the following values:
Your existing static IP address will be displayed in the IP address field before you replace it. Please make a note of this IP address, subnet mask, default gateway and DNS server addresses. IP address: 192.168.2.10 Subnet Mask: 255.255.255.0 Preferred DNS Server: 192.168.2.1 Click OK when finished. 120 IV-1-2-3. Windows 7 1. Click the Start button (it should be located in the lower-left corner of your computer), then click Control Panel. 2. Under Network and Internet click View network status and tasks. 3. Click Local Area Connection. 121 4. Click Properties. 122 5. Select Internet Protocol Version 4 (TCP/IPv4) and then click Properties. 6. Select Use the following IP address and Use the following DNS server addresses, then input the following values:
Your existing static IP address will be displayed in the IP address field before you replace it. Please make a note of this IP address, subnet mask, default gateway and DNS server addresses. IP address: 192.168.2.10 Subnet Mask: 255.255.255.0 Preferred DNS Server: 192.168.2.1 Click OK when finished. 123 IV-1-2-4. Windows 8 1. From the Windows 8 Start screen, you need to switch to desktop mode. Move your curser to the bottom left of the screen and click. 2. In desktop mode, click the File Explorer icon in the bottom left of the screen, as shown below. 124 3. Right click Network and then select Properties. 4. In the window that opens, select Change adapter settings from the left side. 125 5. Choose your connection and right click, then select Properties. 6. Select Internet Protocol Version 4 (TCP/IPv4) and then click Properties. 126 7. Select Use the following IP address and Use the following DNS server addresses, then input the following values:
Your existing static IP address will be displayed in the IP address field before you replace it. Please make a note of this IP address, subnet mask, default gateway and DNS server addresses. IP address: 192.168.2.10 Subnet Mask: 255.255.255.0 Preferred DNS Server: 192.168.2.1 Click OK when finished. 127 IV-1-2-5. Mac 1. Have your Macintosh computer operate as usual, and click on System Preferences 2. In System Preferences, click on Network. 3. Click on Wi-Fi in the left panel and then click Advanced in the lower right corner. 4. Select TCP/IP from the top menu and select Manually from the drop down menu labeled Configure IPv4, then click OK. 128 Your existing static IP address will be displayed in the IP address field before you replace it. Please make a note of this IP address, subnet mask, default gateway and DNS server addresses. 5. In the IPv4 Address and Subnet Mask field enter IP address 192.168.2.10 and subnet mask 255.255.255.0. Click on OK. 129 6. Click Apply to save the changes. 130 IV-1-3. How to Find Your Network Security Key To find your network security key, please follow the instructions appropriate for your operating system. If you are using Windows XP or earlier, please contact your ISP or router manufacturer to find your network security key. IV-1-3-1. Windows 7 & Vista 1. Open Control Panel and click on Network and Internet in the top menu. 2. Click on View network status and tasks which is under the heading Network and Sharing Center. 3. Click on Manage wireless networks in the left menu. 131 4. You should see the profile of your Wi-Fi network in the list. Right click on your Wi-Fi network and then click on Properties. 5. Click on the Security tab, and then check the box labeled Show characters. This will show your network security key. Click the Cancel button to close the window. 132 IV-1-3-2. Mac 1. Open a new Finder window, and select Applications from the menu on the left side. Open the folder labeled Utilities and then open the application Keychain Access. 2. Select Passwords from the sub-menu labeled Category on the left side, as shown below. Then search the list in the main panel for the SSID of your network. In this example, the SSID is EdimaxWireless though your SSID will be unique to your network. 133 3. Double click the SSID of your network and you will see the following window. 4. Check the box labeled Show password and you will be asked to enter your administrative password, which you use to log into your Mac. Enter your password and click Allow. 134 Your network security password will now be displayed in the field next to the box labeled Show password. In the example below, the network security password is edimax1234. Please make a note of your network security password. 135 IV-1-4. How to Find Your Routers IP Address To find your routers IP address, please follow the instructions appropriate for your operating system. IV-1-4-1. Windows XP, Vista & 7 1. Go to Start, select Run and type cmd, then press Enter or click OK. 2. A new window will open, type ipconfig and press Enter. 136 3. Your routers IP address will be displayed next to Default Gateway. 137 IV-1-4-2. Windows 8 1. From the Windows 8 Start screen, move your curser to the top right corner of the screen to display the Charms bar. 2. Click Search and enter cmd into the search bar. Click the Command Prompt app which be displayed on the left side. 138 3. A new window will open, type ipconfig and press Enter. 139 4. Your routers IP address will be displayed next to Default Gateway. 140 IV-1-4-3. Mac 1. Launch System Preferences and click on Network. 2. If you are using an Ethernet cable to connect to your network, your routers IP address will be displayed next to Router. 3. If you are using Wi-Fi, click Wi-Fi in the left panel, and then Advanced in the bottom right corner. 141 4. Click the TCP/IP tab and your routers IP address will be displayed next to Router. 142 IV-2. Connecting to a Wi-Fi network For help connecting to your devices Edimax.Setup SSID for initial setup, or to connect to your devices new Wi-Fi network (SSID) after setup is complete, follow the guide below:
Below is an example of how to connect using Windows Vista the process may vary slightly for other versions of Windows. 1. Click the network icon (
to a network.
, or
) in the system tray and select Connect 2. Search for the SSID of your BR-6428nS V3/BR-6228nS V3 and then click Connect. If you set a password for your network, you will then be prompted to enter it. 143 3. After correctly entering your password, you will be successfully connected to the BR-6428nS V3/BR-6228nS V3s wireless network. 144 IV-3. Troubleshooting If you are experiencing problems with your BR-6428nS V3/BR-6228nS V3, please check below before contacting your dealer of purchase for help. If you are experiencing problems immediately after a firmware upgrade, please contact your dealer of purchase for help. 1. In range extender mode, how do I connect to a network which has a hidden SSID?
a. During iQ Setup select Setup extender manually as shown below. Manually enter the SSID of the hidden network, an SSID for your device and the encryption information for the hidden network. SSID Enter the SSID (network name) of your existing, hidden network. Device SSID Enter an SSID for the BR-6428nS V3/BR-6228nS V3 or leave Encryption it blank to use a default which consists of your existing routers SSID (above) +"_2EX". Enter the encryption information for your existing, hidden network. 145 2. I cant access the Internet. a. Ensure that all cables are connected properly. Try a different Ethernet cable. b. Switch your BR-6428nS V3/BR-6228nS V3 and network device off and back on again. Check the LED status of the BR-6428nS V3/BR-6228nS V3. c. Check if you can access the web based configuration interface. If not, please ensure your computer is set to use a dynamic IP address. d. Login to the web based configuration interface and go to Internet > WAN Setup and check that the connection type is correct. If you are unsure which internet connection type you have, please contact your Internet Service Provider (ISP). e. Connect your computer directly to your modem and check if you can access the internet. If you cant, please contact your Internet service provider for assistance. 3. I cant open the browser based configuration interface. a. Please ensure your computer is set to use a dynamic IP address. Refer to the user manual for guidance if you are unsure how to do this. b. Ensure you enter the correct password. The password is case-sensitive. 4. How do I reset my device to factory default settings?
a. To reset the device back to its factory default settings, press and hold the WPS/Reset button for over 10 seconds, until the power LED begins to flash. Please wait a few minutes for the product to restart. When the device restarts, all settings will be reset. Default settings are displayed on the product label on the back of the device, as shown below:
146 Router Login Enter this URL in a web browser to run iQ Setup or configure advanced settings. You must be connected to the device by Wi-Fi or Ethernet cable. Username/Password This is the default username and password to Wi-Fi Network Name MAC PIN CODE access the browser based configuration interface when you go to the Router Login URL (above). This is the default Wi-Fi network name for the device. Search for this name (SSID) and connect to it in order to access the Router Login URL
(above). A MAC address is unique to every device and is used for identification within a network. Your devices unique MAC address is displayed here. This is your devices PIN code for Wi-Fi Protected Setup (WPS). 5. I forgot my password. a. Reset the router to its factory default settings and use the default username admin and default password 1234. Default settings are displayed on the product label on the back of the device, as shown above. 6. My BR-6428nS V3/BR-6228nS V3 has a weak wireless signal in range extender mode. a. Weak signals are usually caused by interference from other devices or obstacles blocking the BR-6428nS V3/BR-6228nS V3s wireless signal:
b. Keep the device away from other radio devices such as microwaves or wireless telephones. c. Do not put the device in the corner of a room or under/nearby metal. d. Ensure there are as few obstacles as possible between the BR-6428nS V3/BR-6228nS V3 and your wireless network device. In range extender mode, the BR-6428nS V3/BR-6228nS V3S weak wireless signal may be in turn caused by a weak signal from your existing router. Its important to choose a good location for the BR-6428nS V3/BR-6228nS V3 in relation to your existing wireless router. The best location is roughly in the middle between your existing wireless router and the area you would like to be covered by the BR-6428nS V3/BR-6228nS V3. If you are too far away from your existing router, then it is difficult for the BR-6428nS V3/BR-6228nS V3 to receive a wireless signal. 147 7. Do the WAN and LAN ports work the same when the device is in different modes?
No, the WAN and LAN ports have slightly different functions depending on the operating mode of the device. a. In Wi-Fi router mode, the WAN port is for a direct connection to your xDSL modem. The LAN ports are for wired network clients. b. In access point mode, the WAN port is not functional. Connect your existing router to the devices LAN port, and the other LAN ports can connect wired network clients. c. In range extender mode, the WAN port is not functional and the LAN ports are for wired network clients. Do not connect your existing router to the devices WAN or LAN ports, as this can cause the device to malfunction. 8. My network is configured to use static IP addresses. How can I assign a static IP address to my BR-6428nS V3/BR-6228nS V3?
a. You can modify the devices IP address using the browser based configuration interface. Please refer to III-3-4. LAN. 148 IV-4. Glossary Default Gateway (Wireless bridge): Every non-access point IP device needs to configure a default gateways IP address. When the device sends out an IP packet, if the destination is not on the same network, the device has to send the packet to its default gateway, which will then send it out towards the destination. DHCP: Dynamic Host Configuration Protocol. This protocol automatically gives every computer on your home network an IP address. DNS Server IP Address: DNS stands for Domain Name System, which allows Internet servers to have a domain name (such as www.Broadbandaccess point.com) and one or more IP addresses (such as 192.34.45.8). A DNS server keeps a database of Internet servers and their respective domain names and IP addresses, so that when a domain name is requested (as in typing
"Broadbandaccess point.com" into your Internet browser), the user is sent to the proper IP address. The DNS server IP address used by the computers on your home network is the location of the DNS server your ISP has assigned to you. DSL Modem: DSL stands for Digital Subscriber Line. A DSL modem uses your existing phone lines to transmit data at high speeds. Ethernet: A standard for computer networks. Ethernet networks are connected by special cables and hubs, and move data around at up to 10/100 million bits per second (Mbps). IP Address and Network (Subnet) Mask: IP stands for Internet Protocol. An IP address consists of a series of four numbers separated by periods, that identifies a single, unique Internet computer host in an IP network. Example:
192.168.2.1. It consists of 2 portions: the IP network address, and the host identifier. The IP address is a 32-bit binary pattern, which can be represented as four cascaded decimal numbers separated by .: aaa.aaa.aaa.aaa, where each aaa can be anything from 000 to 255, or as four cascaded binary numbers separated by .: bbbbbbbb.bbbbbbbb.bbbbbbbb.bbbbbbbb, where each b can either be 0 or 1. 149 A network mask is also a 32-bit binary pattern, and consists of consecutive leading 1s followed by consecutive trailing 0s, such as 11111111.11111111.11111111.00000000. Therefore sometimes a network mask can also be described simply as x number of leading 1s. When both are represented side by side in their binary forms, all bits in the IP address that correspond to 1s in the network mask become part of the IP network address, and the remaining bits correspond to the host ID. For example, if the IP address for a device is, in its binary form, 11011001.10110000.10010000.00000111, and if its network mask is, 11111111.11111111.11110000.00000000 It means the devices network address is 11011001.10110000.10010000.00000000, and its host ID is, 00000000.00000000.00000000.00000111. This is a convenient and efficient method for access points to route IP packets to their destination. ISP Gateway Address: (see ISP for definition). The ISP Gateway Address is an IP address for the Internet access point located at the ISP's office. ISP: Internet Service Provider. An ISP is a business that provides connectivity to the Internet for individuals and other businesses or organizations. LAN: Local Area Network. A LAN is a group of computers and devices connected together in a relatively small area (such as a house or an office). Your home network is considered a LAN. MAC Address: MAC stands for Media Access Control. A MAC address is the hardware address of a device connected to a network. The MAC address is a unique identifier for a device with an Ethernet interface. It is comprised of two parts: 3 bytes of data that corresponds to the Manufacturer ID (unique for each manufacturer), plus 3 bytes that are often used as the products serial number. NAT: Network Address Translation. This process allows all of the computers on your home network to use one IP address. Using the broadband access points NAT capability, you can access the Internet from any computer on your home network without having to purchase more IP addresses from your ISP. Port: Network Clients (LAN PC) uses port numbers to distinguish one network application/protocol over another. Below is a list of common applications and protocol/port numbers:
150 23 21 25 110 1720 161 162 80 1723 5631 5632 Application Protocol Port Number TCP Telnet TCP FTP TCP SMTP TCP POP3 TCP H.323 SNMP UCP SNMP Trap UDP TCP HTTP PPTP TCP PC Anywhere TCP PC Anywhere UDP Access point: A access point is an intelligent network device that forwards packets between different networks based on network layer address information such as IP addresses. Subnet Mask: A subnet mask, which may be a part of the TCP/IP information provided by your ISP, is a set of four numbers (e.g. 255.255.255.0) configured like an IP address. It is used to create IP address numbers used only within a particular network (as opposed to valid IP address numbers recognized by the Internet, which must be assigned by InterNIC). TCP/IP, UDP: Transmission Control Protocol/Internet Protocol (TCP/IP) and Unreliable Datagram Protocol (UDP). TCP/IP is the standard protocol for data transmission over the Internet. Both TCP and UDP are transport layer protocol. TCP performs proper error detection and error recovery, and thus is reliable. UDP on the other hand is not reliable. They both run on top of the IP (Internet Protocol), a network layer protocol. WAN: Wide Area Network. A network that connects computers located in geographically separate areas (e.g. different buildings, cities, countries). The Internet is a wide area network. Web-based management Graphical User Interface (GUI): Many devices support a graphical user interface that is based on the web browser. This means the user can use the familiar Netscape or Microsoft Internet Explorer to Control/configure or monitor the device being managed. 151 COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability, or fitness for any particular purpose. Any software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right to revise this publication and to make changes from time to time in the contents hereof without the obligation to notify any person of such revision or changes. The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. The software and specifications are subject to change without notice. Please visit our website www.edimax.com for updates. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders. 152 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 153 EU Declaration of Conformity English:
Franais:
etina:
Polski:
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2009/125/EC. Cet quipement est conforme aux exigences essentielles et autres dispositions de la directive 1999/5/CE, 2009/125/CE. Toto zazen je v souladu se zkladnmi poadavky a ostatnmi pslunmi ustanovenmi smrnic 1999/5/ES, 2009/125/ES. Urzdzenie jest zgodne z oglnymi wymaganiami oraz szczeglnymi warunkami okrelonymi Dyrektyw UE 1999/5/EC, 2009/125/EC. Romn: Acest echipament este n conformitate cu cerinele eseniale i alte prevederi relevante ale
:
Magyar:
Trke:
Directivei 1999/5/CE, 2009/125/CE. 1999/5/EC, 2009/125/EC. Ez a berendezs megfelel az alapvet kvetelmnyeknek s ms vonatkoz irnyelveknek
(1999/5/EK, 2009/125/EC). Bu cihaz 1999/5/EC, 2009/125/EC direktifleri zorunlu istekler ve dier hkmlerle ile uyumludur.
: 1999/5/EC, 2009/125/EC. Slovenina: Toto zariadenie spa zkladn poiadavky a alie prslun ustanovenia smernc Deutsch:
Espaol:
1999/5/ES, 2009/125/ES. Dieses Gert erfllt die Voraussetzungen gem den Richtlinien 1999/5/EC, 2009/125/EC. El presente equipo cumple los requisitos esenciales de la Directiva 1999/5/EC, 2009/125/EC. Italiano: Questo apparecchio conforme ai requisiti essenziali e alle altre disposizioni applicabili della Direttiva 1999/5/CE, 2009/125/CE. Nederlands: Dit apparaat voldoet aan de essentile eisen en andere van toepassing zijnde bepalingen van richtlijn 1999/5/EC, 2009/125/EC. Portugus: Este equipamento cumpre os requesitos essnciais da Directiva 1999/5/EC, 2009/125/EC. Norsk:
Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv 1999/5/EC, 2009/125/EC. Denna utrustning r i verensstmmelse med de vsentliga kraven och vriga relevanta bestmmelser i direktiv 1999/5/EG, 2009/125/EG. Dette udstyr er i overensstemmelse med de vsentligste krav og andre relevante forordninger i direktiv 1999/5/EC, 2009/125/EC. Tm laite tytt direktiivien 1999/5/EY, 2009/125/EY oleelliset vaatimukset ja muut asiaankuuluvat mrykset. Svenska:
Dansk:
Suomi:
-----------------------------------------------------------------------------------------------------------
WEEE Directive & Product Disposal At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal. 154 Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: 5-in-1 N300 Wi-Fi Router, Access Point & Range Extender Model No.: BR-6428nS V3 Equipment: 5-in-1 N150 Wi-Fi Router, Access Point & Range Extender Model No.: BR-6228nS V3 The following European standards for essential requirements have been followed:
AN/NZS CISPR 22: 2009+A1:2010 EN 300 328 V1.8.1 (2012-06) EN 301 489-1 V1.9.2 (2011-09) EN 301 489-17 V2.2.1 (2012-09) EN 55022: 2010+AC:2011 Class B EN 55024: 2010 IEC 60950-1:2005(2nd)+A1:2009/EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 EN 61000-3-2: 2006+A1:2009+A2:2009 Class A EN 61000-3-3: 2013 IEC 61000-4-2: 2008 / EN 61000-4-2:2009 IEC 61000-4-3: 2006+A1: 2008+A2: 2010 / EN 61000-4-3: 2006+A1: 2008+A2: 2010 IEC 61000-4-4: 2012 / EN 61000-4-4: 2012 IEC 61000-4-5: 2005 / EN 61000-4-5: 2006 IEC 61000-4-6: 2008 / EN 61000-4-6: 2009 IEC 61000-4-11: 2004 / EN 61000-4-11: 2004 Edimax Technology Co., Ltd. No. 3, Wu Chuan 3rd Road, Wu-Ku Industrial Park, New Taipei City, Taiwan Date of Signature:
Signature:
Printed Name:
Title:
155 July, 2014 Albert Chang Director Edimax Technology Co., Ltd. 156
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2015-03-16 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2015-03-16
|
||||
| 1 | Applicant's complete, legal business name |
Edimax Technology Co Ltd
|
||||
| 1 | FCC Registration Number (FRN) |
0008842908
|
||||
| 1 | Physical Address |
No.278, Xinhu 1st Rd., Neihu Dist.
|
||||
| 1 |
Taipei City, N/A
|
|||||
| 1 |
Taiwan
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
c******@telefication.com
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
NDD
|
||||
| 1 | Equipment Product Code |
9564281409
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
T**** C********
|
||||
| 1 | Title |
senior Specialist
|
||||
| 1 | Telephone Number |
+886-********
|
||||
| 1 | Fax Number |
+886-********
|
||||
| 1 |
t******@edimax.com.tw
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
BTL Inc.
|
||||
| 1 | Name |
S****** L******
|
||||
| 1 | Physical Address |
No.3 Jinshagang 1st Rd, Shixia, Dalang
|
||||
| 1 |
China
|
|||||
| 1 | Telephone Number |
86-76********
|
||||
| 1 | Fax Number |
86-76********
|
||||
| 1 |
s******@newbtl.com
|
|||||
| app s | Non Technical Contact | |||||
| 1 | Firm Name |
BTL Inc.
|
||||
| 1 | Name |
C****** W******
|
||||
| 1 | Physical Address |
No.3 Jinshagang 1st Rd, Shixia, Dalang
|
||||
| 1 |
China
|
|||||
| 1 | Telephone Number |
86-76********
|
||||
| 1 | Fax Number |
86-76********
|
||||
| 1 |
c******@newbtl.com
|
|||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DTS - Digital Transmission System | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 5-in-1 N300 Wi-Fi Router, Access Point & Range Extender | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
BTL Inc.
|
||||
| 1 | Name |
D**** D****
|
||||
| 1 | Telephone Number |
86769******** Extension:
|
||||
| 1 | Fax Number |
+8676********
|
||||
| 1 |
d******@newbtl.org.cn
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.2300000 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC