09-2019 / v1.0 RE-7478MK1 Quick Installation Guide Contents I. Product Information .................................. 4 I-1. Package Content ..................................................................... 5 I-2. System Requirements ............................................................. 5 I-3. Hardware Interface ................................................................ 6 I-4. LED Status ............................................................................... 7 II. Installation ................................................ 8 II-1. Hardware Installation ............................................................ 8 II-2. Smart App Installation ........................................................... 9 II-3. Connect to RE-7478MK1 ..................................................... 10 II-4. App Setup ............................................................................ 11 II-5. Manually Add Node To EdiMESH ......................................... 13 II-6. Adding nodes with the WPS Button .................................... 14 III. Menu .......................................................15 III-1. Home .................................................................................. 16 III-2. Internet .............................................................................. 17 III-3. Wi-Fi ................................................................................... 17 III-4. QoS ..................................................................................... 18 III-5. Parental Control ................................................................. 19 III-6 Advanced ........................................................................... 20 2 III-7. Signal Status ....................................................................... 21 III-8. Logout ................................................................................ 22 IV. System .....................................................22 IV-1. Firmware Update ............................................................... 24 IV-2. LED Eco Mode .................................................................... 25 IV-3. Nickname & Login Password .............................................. 25 IV-4. Date & Time ....................................................................... 26 IV-5. Languages .......................................................................... 27 IV-6. Factory Reset ..................................................................... 28 IV-7. About ................................................................................. 30 3 I. Product Information The convenient package RE-7478MK1 of three nodes (1 Master, 2 Slave) effortlessly create a reliable internet connection and extend your internet access throughout your home or office. With the EdiMESH App, you can set up your devices in minutes, and manage each device from anywhere. You can find all supporting documents from the link below or via QR Code:
https://www.edimax.com/download
(Once youve visited the Edimax official website, please enter the model no. RE-7478MK1 into the search box to search for your product.) 4 I-1. Package Content 3 x Nodes(12Vdc,1A)
(1 Master, 2 Slaves) Quick Installation Guide Ethernet Cable Power Adapter (12Vdc,1A) I-2. System Requirements
- Cable or xDSL Internet connection (RJ-45 cable modem or RJ-45 ADSL modem).
- iOS 9.0 and above or Android 4.x and above for EdiMESH App. 5 I-3. Hardware Interface No. Description LED Status (LAN2, LAN1, WLAN, WPS, PAIR, Power) 1 2 3 4 5 Power Jack (12V/1A) WPS / Reset LAN1 LAN2 6 I-4. LED Status Power Green Pair (Master) Green LED Color Status Description On Off On Off On Off On Off On Off On Off On Off Power on. Power off. Slave signal detected. No Slave signal detected. Excellent slave location. Signal strength: 80 100%
Good slave location. Signal strength: 40 80%
Poor slave location. Signal strength: Below 40%
No master signal detected. WPS connection established (WPS LED will remain on for 30 seconds to indicate a successful connection). WPS in progress (waiting for another WPS device). No WPS in progress. Device is connected. Device is not connected. LAN port is connected. LAN port is not connected. LAN port is connected. LAN port is not connected. Pair (Slave) Green Slow Flashing Quick Flashing WPS Green Flashing WLAN Green LAN1 Green LAN2 Green 7 This section will guide you through the steps to connect your RE-7478MK1 to II. Installation the EdiMESH App. II-1. Hardware Installation Please follow the steps below:
1. Connect a power supply to each node. 2. Connect the master to the router using Ethernet cables. One of the nodes has a Master sticker while the other two have Slave stickers, indicating their relationships. NOTE: Make sure the Ethernet cable is connected to the LAN1 port of the Master node as shown below:
3. Please wait power and Internet LEDs (LAN1) are turned on. 8 II-2. Smart App Installation Search and download "EdiMESH" in Apple App Store or Google Play Store. Launch the "EdiMESH" in your smart mobile device. For Internet connection procedure, please follow the instructions below according to your mobile device. 9 II-3. Connect to RE-7478MK1 Please connect RE-7478MK1 with your smart phone. 1. Wi-Fi Connection Connect your device through mobile to the Wi-Fi SSID of your RE-7478MK1
(EDIMAX_**). Please find the unique SSID of your RE-7478MK1 on the product label. The last 2 digits ** of the SSID EDIMAX_** "is the Mac last two digits of the Masters label and Password: 12345678. Note: Clicking the Wi-Fi SSID, and select your Wi-Fi network, which must be the same as your nodes (1 Master, 2 Slaves) Wi-Fi SSID from the list. Continue by entering your Wi-Fi password 12345678, clicking the Confirm button to save the Wi-Fi setting. 10 II-4. App Setup Please follow the steps below, 1. Download and install EdiMESH app via Google Play or Apple App Store. 2. Open EdiMESH. 3. Click Choose Mesh System. 11 4. Create a nickname for your Mesh System and click Next. 5. Enter the login password (for default login password 12345678, see the label of the product) and click Next. 12 Once you register your nickname and login password successfully, a welcome page is displayed. Congrats! You can now remotely control RE-7478MK1 using the EdiMESH App. II-5. Manually Add Node To EdiMESH 13 Please note that the products are already paired. If the node does not connect to EdiMESH App successfully, or if you are trying to add a new node to EdiMESH, you can simply use the EdiMESH App or WPS button. Please follow the steps below if you want to add an additional node, 1. Click the + icon of "My Wi-Fi System" at the bottom of the home page. 2. Click START to search for the new node. 3. Click Next (Please check if the serial number of the node is correct). 4. Click Finish. II-6. Adding nodes with the WPS Button 14 Please note that the 3 X nodes (Master/Slave) are already paired. If the slave node is failing to connect to the master node then you can use the WPS button to connect the Master/Slave node. Please follow the steps below, 1. Press the WPS button on the slave nodes and the master node. Note: If the Slave is added and paired successfully, the Pairing LED of the Slave will flash. III. Menu 15 Please click the Menu icon on the top left corner of the Home Page and follow the instructions below for more details:
III-1. Home 16 Going back to the homepage. III-2. Internet You can check the current connected internet information, Use the bridge mode if you are trying to use the device by connecting to an existing router or modem. If set up as a bridge mode, the same network as the connected router or modem is used. III-3. Wi-Fi 17 You can change the SSID name and password, change Security Type, enable/disable Hide SSID, enable/disable Guest Network. III-4. QoS 18 You can enable QoS operation to achieve maximum bandwidth. QoS also involves controlling and managing network resources. III-5. Parental Control 19 When you turn on Parental Control, you can set schedule and restrict what websites can be accessed. III-6. Advanced 20 Features such as DMZ, UPnP and IPv6 are supported. We recommend that you use the default settings. III-7. Signal Status 21 You can check how many devices are connecting to your RE-7478MK1. III-8. Logout You can log off the account by clicking logout. IV. System 22 Please click the System icon on the top right corner of homepage. And follow the instructions below for more details:
23 IV-1. Firmware Update Please click UPDATE if the latest firmware is available. 24 IV-2. LED Eco Mode turned off. If the LED Eco Mode is enabled, all LEDs except the power LED will be IV-3. Nickname & Login Password You can change the nickname and login password in this section. 25 IV-4. Date & Time You can set up the date and time in the EdiMESH. Note: Not all countries have the DST, so you need to set the DST according to your local time. 26 IV-5. Languages You can change the language in the EdiMESH App. It supports English, Traditional Chinese, Simplified Chinese, Deutsch, Franais, Nederlands, Italiano, Espaol, Portugus, dansk, Norsk, Svenska, Polski, Romn, etina, and . 27 IV-6. Factory Reset If you experience problems with your RE-7478MK1, you can reset the devices back to their factory settings. Note: A factory reset erases all your data from your RE-7478MK1. 1. Press and hold the reset button on the RE-7478MK1 for at least 10 seconds Hardware Reset then release the button. 2. Wait for the Mesh to restart. 28 Software Reset 1. Click FACTORY RESET button. NOTE: Please wait for the RE-7478MK1 to restart. It will take a few minutes to completely erase your data and finish the setting. The RE-7478MK1 is ready for setup when the PWR is Green. 29 IV-7. About Conditions in this section. You can find the information of App Version, Privacy Policy and Terms and 30 COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability, or fitness for any particular purpose. Any software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right to revise this publication and to make changes from time to time in the contents hereof without the obligation to notify any person of such revision or changes. The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. The software and specifications are subject to change without notice. Please visit our website www.edimax.com for updates. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders. 31 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio technician for help. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is restricted to indoor use. Federal Radiation Exposure Statement 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body or nearby persons. This device is restricted to indoor use. RED Compliance Statement Compliance with 2014/53/EU Radio Equipment Directive (RED) Frequency range (MHz) Max. Transmit Power (dBm) 2400-2483.5 5150-5250 19.74 22.76 In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU:
A simplified DoC shall be provided as follows: Article 10(9) Hereby, Edimax Technology Co., Ltd. declares that the radio equipment type AC1200 Wireless LAN Dual-Band Concurrent Repeater is in compliance with Directive 2014/53/EU The full text of the EU declaration of conformity is available at the following internet address: http://www.edimax.com/edimax/global/
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 32 Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment. EU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland. EU Countries Not Intended for Use None 33 EU Declaration of Conformity English:
Franais:
etina:
Polski:
Magyar:
Trke:
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Cet quipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Toto zazen je v souladu se zkladnmi poadavky a ostatnmi pslunmi ustanovenmi smrnic 2014/53/EU, 2014/35/EU. Urzdzenie jest zgodne z oglnymi wymaganiami oraz szczeglnymi warunkami okrelonymi Dyrektyw UE 2014/53/EU, 2014/35/EU. Romn: Acest echipament este n conformitate cu cerinele eseniale i alte prevederi relevante ale Directivei 2014/53/UE, 2014/35/UE. 2014/53/EU, 2014/35/EU. Ez a berendezs megfelel az alapvet kvetelmnyeknek s ms vonatkoz irnyelveknek
(2014/53/EU, 2014/35/EU). Bu cihaz 2014/53/EU, 2014/35/EU direktifleri zorunlu istekler ve dier hkmlerle ile uyumludur.
: 2014/53/EU, 2014/35/EU. Slovenina: Toto zariadenie spa zkladn poiadavky a alie prslun ustanovenia smernc Deutsch:
Espaol:
2014/53/EU, 2014/35/EU. Dieses Gert erfllt die Voraussetzungen gem den Richtlinien 2014/53/EU, 2014/35/EU. El presente equipo cumple los requisitos esenciales de la Directiva 2014/53/EU, 2014/35/EU. Italiano: Questo apparecchio conforme ai requisiti essenziali e alle altre disposizioni applicabili Nederlands: Dit apparaat voldoet aan de essentile eisen en andere van toepassing zijnde bepalingen della Direttiva 2014/53/EU, 2014/35/UE. van richtlijn 2014/53/EU, 2014/35/EU. Portugus: Este equipamento cumpre os requesitos essnciais da Directiva 2014/53/EU, 2014/35/EU. Norsk:
Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv 2014/53/EU, 2014/35/EU. Svenska: Denna utrustning r i verensstmmelse med de vsentliga kraven och vriga relevanta Dansk:
bestmmelser i direktiv 2014/53/EU, 2014/35/EU. Dette udstyr er i overensstemmelse med de v sentligste krav og andre relevante forordninger i direktiv 2014/53/EU, 2014/35/EU. suomen kieli: Tm laite tytt direktiivien 2014/53/EU, 2014/35/EU. oleelliset vaatimukset ja muut asiaankuuluvat mrykset.
WEEE Directive & Product Disposal At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal. 34 Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment Directive. Equipment: AC1200 Wireless LAN Dual-Band Concurrent Repeater Model No.: RE-7478MK1 The following European standards for essential requirements have been followed:
Directives 2014/53/EU Spectrum
: EN 300 328 V2.1.1 (2016-11) EN 301 893 V2.1.1 (2017-05) EMC
: EN 301 489-1 V2.2.2 (2019-09) EN 301 489-17 V3.2.0 (2017-03) EN 55032:2015/AC:2016 Class B EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55035:2017
: EN 62311:2008 EMF Safety (LVD) : IEC 62368-1:2014 (2nd Edition) and/or EN 62368-1:2014+A11:2017 Edimax Technology Europe B.V. Fijenhof 2, 5652 AE Eindhoven, The Netherlands a company of :
Edimax Technology Co., Ltd. No. 278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan Signature:
Printed Name:
Title:
David Huang Director Edimax Technology Europe B.V. Date of Signature:
Signature:
Jan., 2020 Printed Name:
Title:
35 Albert Chang Director Edimax Technology Co., Ltd. 36