FCC ID: NDD9574892206 Access Point

ProductSpecificationofEW7489OAX 1.1. 1.2. 1. GeneralDescription .................................................................................................................................... 1 Product Description ....................................................................................................................... 1 Product Model Number ................................................................................................................. 1 2. ProductSpecification .................................................................................................................................. 2 Key parts ........................................................................................................................................ 3 2.1. Block diagram ............................................................................................................................... 4 2.2. Product outlook ............................................................................................................................. 5 2.3. LED definition ............................................................................................................................... 6 2.4. PCBdimension ............................................................................................................................... 7 2.5. RF Output Power& RF Receive Sensitivity .................................................................................. 7 2.6. Power ............................................................................................................................................. 8 2.7. Antenna.......................................................................................................................................... 8 2.8. 2.9. Certification ................................................................................................................................... 8 2.10. S/W specification list ..................................................................................................................... 8 3. ProductTestingPlan ................................................................................................................................... 9 Testing Item ................................................................................................................................................ 9 4. ProjectCommunication ............................................................................................................................ 10 Member List .............................................................................................................................................. 10 RevisionRecord Version RevisionDate Comments 1.0 2021/12/06 Firstrelease. 1.1 2021/12/13 Changeflashfrom256MBto512MB ModelnamechangetoEW7489OAX RemoveBuzzer ESDtomeetIEC6100042andIEC6100045 requirements 1.2 1.3 2021/12/16 AddinternalMicoUSBforconsoleaccess 2021/12/16 AddLEDbehaviors 1.4 2021/12/30 ChangeLEDtosinglecolorLED UpdateLEDbehaviors AddinternalUSBTypeA 1. GeneralDescription 1.1. ProductDescription EW7489OAXAX3000OutdoorGigabitDualBandDualAP 1.2. ProductModelNumber Acelink:EW7489OAX Sophos:NeoBetaX 1 2. ProductSpecification WirelessTechnology Memory IEEE802.11b/g/n/ax2.4GHz1024QAMwith574Mbpps IEEE802.11a/n/ac/ax5GHz1024QAMwith2400Mbps SupportMUMIMO/OFDMAat2.4GHzand5GHz DRAMMemory:2x512MbyteDDR3L FlashMemory:512MbyteNAND FlashMemory:4MbyteNOR(forboot) 1xFactoryResetButton 1xGigabitLAN(supportsPoEIEEE802.3at),IP67rated, ExternalInterfaces Console RTC SurgeandESD EnclosureDimension andWeight weatherproof 1xInternalUSBTypeA 3xsinglecolorLED Status:SinglecolorGreen Radio:SinglecolorGreen Meshon/off:SinglecolorGreen 1xInternalStandardMicroUSB n/a 5KVSurgeand8KVESDProtection MeetIEC6100042 MeetIEC6100045 IP67ratedwithGoreVentdesign,andoutdoordesigntomeet UL/EN6095022. M25CableGlandforeasyinstallationandfastdeployment Externalplasticenclosure(UL746C)compliantwith UVresistant InternalgaskettomeetUL94V0 260.5(L)*180(W)*69(H)mmx63mm Topcasematerial:plastics 2 Bottomcase:diecastforNtypeantenna Antennaconnector 4xNtypeconnector Mounting HorizontalandverticalPolemount Wallmount OperatingTemperature OperatingTemperature:40~55 (withheater) StorageTemperature 40to70 OperatingHumidity:10%to95%noncondensing StorageHumidity:10%to95%noncondensing MTBF: >500Khoursat25 Humidity MTBF 2.1. Keyparts Coreboard CPU QualcommIPQ5018,dualcore64bitA53@1GHz WiFi2.4GHzRF QualcommIPQ5018 WiFi5GHzRF QualcommSpruceQCN6102 Memory DDR32x512MB(512MB*8bit) NANDFlash256MB SPINORFlash4MB(forbootloader) WiFiRFPA/FEM 2.4GHzFEM:QPF4288A 5GHz FEM:QPF4588A 5Gfilter Akoustis,A10155 2.4GSAWfilter Antenna SAWFILTER2.4GSMD(TAISAW)/TA2604B/

1.4*1.1*0.6mm1345S000001550U CoexistwithLTE

(reserved) 2x2.4GIPEX 3 IOboard PDIC 2.5GEPHY Ethernet TPM 2x5GIPEX MPSMP8009 QCA8081 QCA8081for2.5GE(802.3at) InfineonSLB9670VQ2.0 Internalconnector 2xminiPCIEconnectorforcoreboard Diplexer 2xdiplexer(reserved) M.2 ReserveaM.2connectorEkeyforfutureupgrade2x2spruce6G module,EW7922M6E 2.2. Blockdiagram 4 2.3. Productoutlook Die-cast Bottom housing; Powder paint. Plastic housing Outside Dimension 260.5 (L) * 180 (W) * 69 (H) mm PCBA Size 175 (L) * 135 (W) mm 1 8 0 69 8 7 260

.5 Unit: mm 5 2.4. LEDdefinition SinglecolorLEDisformesh. SinglecolorLEDisforRadio. SinglecolorLEDisforStatus. Description APisofforrebootstarted APisbootingandconnectingtowireless controllerorapplyingconfiguration*

Configurationresetinprogress*

Error,nowirelesscontrollerfound.APwill reboot(ifnotyetclaimedbyacontroller).Check networkconnectioniferrorpersists. Ifresetbuttonpressed:APpreparingconfigurationrese Firmwareupdateinprogress*

Note:Donotdisconnectfrompower APhasnoconnectiontothewirelesscontroller APisnotclaimedbywirelesscontroller APisoperationinSingleBand APisoperationinDualBand SingleColorLEDProposalBetaXWiFi6 w/oflashingLEDfornormaloperation SingleColorLEDProposalBetaXWiFi6E w/oflashingLEDfornormaloperation Status Off Flashing Green Flashing Green Flashing Green FlashingFast Green Green Green Radio Off Off Flashing Green Flashing Green Off Flashing Green Flashing Green Mesh Off Off Off Flashing Green Off Flashing Green FlashingFast Green Green Off OfforSolidGreen Green Green OfforSolidGreen Status Off Flashing Green Flashing Green Flashing Green FlashingFast Green Green Green N/A N/A Radio Off Off Flashing Green Flashing Green Off Flashing Green Flashing Green N/A N/A Mesh Off Off Off Flashing Green Off Flashing Green FlashingFast Green N/A N/A APisoperationinSingleBandorDualBand(2.4/5Ghz) APisoperationinTriBand(2.4,5,6Ghz) N/A N/A N/A N/A N/A N/A Green Off OfforSolidGreen Green Green OfforSolidGreen 6 2.5. PCBdimension 2.6. RFOutputPower&RFReceiveSensitivity 7 2.7. Power Item Connector Description 2 RJ45 802.3atInjector 2.8. Antenna 2.9. Certification CEClassB(withLVD) FCCClassB 2.10. S/Wspecificationlist Madebyacelink 8 3. ProductTestingPlan TestingItem 9 4. ProjectCommunication MemberList Title Name Phone ProjectLeader PM RD:Hardware RD:Software RD:Mechanical PA TE PE 10 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 11 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This radio transmitter [IC: 4701A-74892206] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Le prsent metteur radio [IC: 4701A-74892206] a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'metteur. Ant. Brand Model Name Antenna Type Connector 1 2 3 4 Grand-Tek Grand-Tek Grand-Tek Grand-Tek 3009-00000231-50Z Omni Antenna 3009-00000231-50Z Omni Antenna 3009-00000231-50Z Omni Antenna 3009-00000231-50Z Omni Antenna N-type N-type N-type N-type Ant. Port 1 2 3 4 1 2 1 2 2.4G 3.2 3.2 3.2 3.2 Gain (dBi) Cable Loss (dB) 2.4G

0.5 0.5 5G 1.2 1.55

5G 6 6 6 6 12 IC Radiation Exposure Statement:

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 21cm between the radiator & your body. Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 21cm de distance entre la source de rayonnement et votre corps 13

99.10 78 35x10mm H3 EDIMAX Model: EW-74890AX Input rating:

PoE max. 57Vdc, 0.64, FCC ID : NDD9574892206 IC: 4701A-74892206 CAN ICES-003(B)/NMB-003(B) CEFE ZO This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Made in Taiwan OT 62 id

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 8, 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: NDD9574892206 Edimax Technology Co Ltd (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: <N/A>

Sincerely, Applicant Address

: Edimax Technology Co Ltd

: No.278, Xinhu 1st Rd. , Neihu Dist., Taipei City, Taiwan Signature

_________________________________ Name and Job Title.

: Tracy Cheng, Senior Specialist E-mail Tel.

: tracy@edimax.com.tw

: +886-2-7739-6639

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 8, 2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: NDD9574892206 Edimax Technology Co Ltd (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Applicant Address

: Edimax Technology Co Ltd

: No.278, Xinhu 1st Rd. , Neihu Dist., Taipei City, Taiwan Signature

_________________________________ Name and Job Title.

: Tracy Cheng, Senior Specialist E-mail Tel.

: tracy@edimax.com.tw

: +886-2-7739-6639

Confidentiality Request Letter Date: March 9, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 FCC ID: NDD9574892206 To whom it may concern:

Short-term Confidentiality pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. 2.803 and the importation rules in 47 C.F.R. 2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we are request the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 180 days after the grant date. 1. Internal Photographs 2. External Photographs 3. Users manual 4. Test Set up photos Permanent Confidentiality Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. 1. Block Diagram 2. Schematics 3. Operational Description / Software Security For U-NII Devices It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely, Applicant Address

: Edimax Technology Co Ltd

: No.278, Xinhu 1st Rd. , Neihu Dist., Taipei City, Taiwan Signature

_________________________________ Name and Job Title.

: Tracy Cheng, Senior Specialist E-mail

: tracy@edimax.com.tw

EDIMAX NETWORKING PEOPLE TOGETHER Letter of Authorization Date: January 10, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: NDD9574892206 Product Name: Access Point To whom it may concern:

We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization to the FCC Rules and Regulations. Sporton International Inc. _ No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Name : Leo Huang Job Title : Director e-mail : Leohuang@sporton.com.tw Address We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant : Edimax Technology Co Ltd Address : No.278, Xinhu 1st Rd. , Neihu Dist., Taipei City, Taiwan Signature Name and Job Title. : Tracy Cheng, Senior Specialist E-mail : tracy@edimax.co Tel. : +886-2-7739-6639

EDIMAX NETWORKING PLOBLE TOGETHER Date: January 10, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: declaration of composite/rated equipment for FCC ID: NDD9574892206 To Whom it may concern, We, the undersigned, would like to declare that the composite portion catagorized as Class B personal computers and peripherals has been authorized under the Supplier's Declaration of Conformity (SDoC) procedures. Sincerely, Applicant : Edimax Technology Co Ltd Address : No.278, Xinhu 1st Rd. , Neihu Dist., Taipei City, Taiwan Signature Name and Job Title. : Tracy Cheng, Senior/Specialist E-mail : tracy@edimax.com Tel. : +886-2-7739-6639

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 8, 2023 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: NDD Edimax Technology Co Ltd (the applicant) certifies that, as of the date of the filing of the application, Edimax Computer Company is our designated U.S. agent for service of process for the above referenced Grantee Code. Edimax Technology Co Ltd accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the designated agent information changes. Edimax Computer Company accepts the designation by the applicant as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Designated U.S. Agent Information:

FRN: 0033468026 Name: Edimax Computer Company Address: 530 Technology Drive Suite 100, Irvine, CA 92618, USA Contact Person: Brian Huang Tel.: 408-496-1105 Email: brianhuang@edimax.com Sincerely, Applicant U.S. Agent Edimax Technology Co Ltd Edimax Computer Company Tracy Cheng, Senior Specialist Brian Huang Signature:

Signature: