FCC ID: NDD9578112209 Industrial AC650 Dual-Band USB Adapter

IEW-7811UTC Quick Installation Guide 10-2022 / V2.1 I. Windows Plug-and-Play Installation Insert Plug-and-Play Connect I-1. Insert the USB Adapter Insert the USB adapter into your computer. I-2. Plug-and-Play 1. The Wi-Fi icon will be displayed on the right-bottom Windows taskbar if the Plug-and-Play is supported. (Refer to III. FAQ -> Q1) 2. Click the Wi-Fi icon to connect to the Wi-Fi network. The Wi-Fi icon might be different depending on your OS version. I-3. Select & Connect Wi-Fi Network Select your Wi-Fi Network (SSID), click Connect and enter the password if it is required. 1 II. Windows Driver Installation Insert Download & Install Driver Connect II-1. Insert the USB Adapter Insert the USB adapter into your computer. II-2. Download & Install the Driver 1. Please access the link below. Search the model name in the search box and download the driver. https://www.edimax.com/download 2. Unzip the downloaded file and run the setup.exe. Follow the instructions to complete the driver installation. 2 II-3. Connect to the Wi-Fi Network 1. Click the Wi-Fi icon on the windows taskbar to connect to the Wi-Fi network. The Wi-Fi icon might be different depending on your OS versions.

(Refer to III. FAQ -> Q2) 2. Select your Wi-Fi network (SSID), connect and enter the password if it is required. 3 III. Frequently Asked Question (FAQ) Q1. Why the Wi-Fi icon doesnt display on the Windows taskbar?

A. Your computer doesnt support Plug-and-Play for this device. Please go to section II-2, to download and install the driver and try again. Q2. After the driver installed, why the Wi-Fi icon doesnt display on the Windows taskbar?

A. For Windows 7, please right-click Date and Time at the taskbar, and select Properties. Find the system item Network, set the behaviors as On. Then the Wi-Fi icon will be displayed on the Windows Taskbar. IV. More Information For more information, please visit our website with the following URL or scan the QR code:

https://www.edimax.com/download Please search the model name to enter the referred page. 4 V. Safety Instructions The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details. This product is designed for indoor use only. Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product. The device contains no user serviceable parts. Do not attempt to service the product and never disassemble the product. Do not spill food or liquid on your product and never push any objects into the openings of your product. Do not use this product near water, areas with high humidity, or condensation. Keep the product away from radiators and other heat sources. This device is not designed to be operated by children. Always unplug the product from mains power before cleaning and use a dry lint free cloth only VI. Simplified EU Declaration of Conformity Hereby, Edimax Technology declares that the radio equipment type, Wi-Fi USB Adapter, is in compliance with Directive 2014/53/EU, 2014/35/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.edimax.com/download/doc 5 COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability, or fitness for any particular purpose. Any software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right to revise this publication and to make changes from time to time in the contents hereof without the obligation to notify any person of such revision or changes. The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. The software and specifications are subject to change without notice. Please visit our website www.edimax.com for updates. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders. 6 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio technician for help. FCC Caution This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device was tested for typical lap held operations with the device contacted directly to the human body to the back side of the notebook computer. To maintain compliance with FCC RF exposure compliance requirements, avoid direct contact to the transmitting antenna during transmitting. Body SAR This product meets applicable national SAR limits of 1.6W/kg. This specific maximum SAR values can be found in the section of this user guide. When carrying the product or using it while worn on your body, maintain a distance of 0.5cm from the body to ensure compliance with RF exposure requirements. We, Edimax, are responsible for ensuring frequency stability such that an emission is maintained within the band of operation under all conditions of normal operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. 7 RED Compliance Statement Compliance with 2014/53/EU Radio Equipment Directive (RED) In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU:

P/N Frequency range (MHz) Max. Transmit Power (dBm) IEW-7811UTC 2412 - 2472 5180 - 5240 5260 - 5320 19.85 17.39 19.02 A simplified DoC shall be provided as follows: Article 10(9) Hereby, Edimax Technology Co., Ltd. declares that the radio equipment is in compliance with Directive 2014/53/EU The full text of the EU declaration of conformity is available at the following internet address: http://www.edimax.com/edimax/global/

This device meets the EU RED requirements on the limitation of exposure of the general public to electromagnetic fields by way of health protection. This device has been tested and meets the ICNIRP exposure guidelines and the European SAR is measured with this device at a separation of 0.5cm to the body, while transmitting at the highest certified output power level in all frequency bands of this device. Carry this device at least 0.5cm away from your body to ensure exposure levels remain at or below the as-tested levels. The highest SAR value is 0.556 W/kg. For class 2 device (supporting WLAN 5GHz: 5150-5350 MHz) The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment. EU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland. EU Countries Not Intended for Use None 8 EU Declaration of Conformity English:

Franais:

etina:

Polski:

This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Cet quipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Toto zazen je v souladu se zkladnmi poadavky a ostatnmi pslunmi ustanovenmi smrnic 2014/53/EU, 2014/35/EU. Urzdzenie jest zgodne z oglnymi wymaganiami oraz szczeglnymi warunkami okrelonymi Dyrektyw UE 2014/53/EU, 2014/35/EU. Romn: Acest echipament este n conformitate cu cerinele eseniale i alte prevederi relevante ale

Magyar:

Trke:

Directivei 2014/53/UE, 2014/35/UE. 2014/53/EU, 2014/35/EU. Ez a berendezs megfelel az alapvet kvetelmnyeknek s ms vonatkoz irnyelveknek

(2014/53/EU, 2014/35/EU). Bu cihaz 2014/53/EU, 2014/35/EU direktifleri zorunlu istekler ve dier hkmlerle ile uyumludur.

: 2014/53/EU, 2014/35/EU. Slovenina: Toto zariadenie spa zkladn poiadavky a alie prslun ustanovenia smernc Deutsch:

Espaol:

2014/53/EU, 2014/35/EU. Dieses Gert erfllt die Voraussetzungen gem den Richtlinien 2014/53/EU, 2014/35/EU. El presente equipo cumple los requisitos esenciales de la Directiva 2014/53/EU, 2014/35/EU. Italiano: Questo apparecchio conforme ai requisiti essenziali e alle altre disposizioni applicabili della Direttiva 2014/53/EU, 2014/35/UE. Nederlands: Dit apparaat voldoet aan de essentile eisen en andere van toepassing zijnde bepalingen van richtlijn 2014/53/EU, 2014/35/EU. Portugus: Este equipamento cumpre os requesitos essnciais da Directiva 2014/53/EU, 2014/35/EU. Norsk:

Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv 2014/53/EU, 2014/35/EU. Svenska: Denna utrustning r i verensstmmelse med de vsentliga kraven och vriga relevanta Dansk:

bestmmelser i direktiv 2014/53/EU, 2014/35/EU. Dette udstyr er i overensstemmelse med de v sentligste krav og andre relevante forordninger i direktiv 2014/53/EU, 2014/35/EU. suomen kieli: Tm laite tytt direktiivien 2014/53/EU, 2014/35/EU. oleelliset vaatimukset ja muut asiaankuuluvat mrykset.

WEEE Directive & Product Disposal At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal. 9

EW-7811WTC Made in China FCC ID:NDD9578112209 C Is ING IEW-7811UTC Made in China FCC ID:NDD9578112209 C IS ING

Edimax Technology Co Ltd 9/22/2022 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: NDD9578112209 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:

- e.g. Block Diagram

- e.g. Schematics

- e.g. Operational Description

- e.g. SDR software and security information

- e.g. Antenna design The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signature:

Name & title: Tracy Chng / Senior Specialist Contact address: No. 278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan Telephone Number: 886-2-7739-6639 Fax Number: 886-2-7739-6887 Email: tracy@edimax.com.tw Edimax Technology Co Ltd 9/22/2022 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Short Term Confidentiality Request for FCC ID: NDD9578112209 To Whom It May Concern:

Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 [__] or 180 [xX] days; or for a specified date of [| /J/__]J not to exceed 180 days from the Grant Date. See KDB 726920.

- e.g. User Manual

- e.g. External / Internal Photos

- e.g. Test Setup photos The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Signature: \

Name & title: Tracy Cheng / Senior Specialist Contact address: No. 278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan Telephone Number: 886-2-7739-6639 Fax Number: 886-2-7739-6887 Email: tracy@edimax.com.tw

Date : 1/9/2023 Edimax Technology Co Ltd No.278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan To whom it may concern :

We have declared below featured for FCC equipment authorization, Device FCC ID : NDD9578112209 UNII Device Declaration Letter

(1) DFS Device-- [_] Master , [_] Client with Radar detection capability ,

[] Client without radar detection capability , I N/A

(2) Active / Passive Scanning , adhoc mode access point capability

(3) Country code selection ability -] Yes , Ex] No

(4) Frequency Band Active Scanning passive scanning Ad Hoc Mode Access point

(MHz) (the device can (where the device is capability capability transmit a probe can listen only with no _(beacon)) probes) 5150-6250 LJ Yes , Dx] No Eves. CINo | CJ ves, No | TL] Ves, No 5725-5850 _| L] Yes , XJ No XX] Yes , [_] No LJ Yes, KINo | [1] Yes, DX] No

[] Yes, L_] No L] Yes , -] No []Yes,LJNo | L] Yes, []No L] Yes , .] No [_] Yes , L.] No []Yes, LJNo | L] Yes, [J] No

[] Yes, [_] No [] Yes, [_] No []Yes, JNo | LJ] Yes, [J No L] Yes , L] No L] Yes , [_] No []Yes,JNo | L] Yes, ([_] No

[.] Yes, L_] No L] Yes , _] No E]Yes,L_JNo | L]Yes,[]No If no, pls explain how it was implemented :Not support UI control. Meet 15.202 / RSS 247 requirement - XX] Yes, ] No, pls check below :

_] A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices IX] A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-

DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. L] Apply , BX] No Apply , (Ifapply , pls help to provide explanation on it was implement , and how software was controlled) Signature Name / Title : Tracy Ching / Senior Specialist Tel: 886-2-7739-6639 Email: tracy@edimax.com.tw 8

Edimax Technology Co Ltd No.278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan Date : 1/9/2023 Dear Sir or Madam, Due to the business consideration, we hereby declare that our product of Industrial AC650 Dual-Band USB Adapter Model: IEW-7811UTC and as following is difference Serial model: EW-7811WTC are identical with main model and the difference is :

All models are electrically identical, different model names are for marketing purpose. Any questions regarding this declaration, please dont hesitate to contact us. Sincerely, Signature N/

Name/Title: Tracy Cheng / Senior Specialist Company Name: Edimax Technology Co Ltd TEL: 886-2-7739-6639 FAX: 886-2-7739-6887 Email: tracy@edimax.com.tw

Edimax Technology Co Ltd No.278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan Date: 1/9/2023 Declaration of Authorization We Name: Edimax Technology Co Ltd Address: No. 278, Xinhu 1st Rd., Neihu Dist., City: Taipei State:

Country: Taiwan Declare that Name Representative of agent: William Chung / Senior Director Agent Company name: Eurofins EXE Wireless Taiwan Co., Ltd. Address: No. 140-1, Changan Street, Bade District, City: Taoyuan Country: Taiwan Is authorized to apply for Certification of the following product(s) Product Name: Industrial AC650 Wi-Fi 5 Dual-Band USB Adapter Model: IEW-7811UTC, EW-7811 WTC FCC ID: NDD9578112209 Trademark: EDIMAX on our behalf This is valid until December 31, 2023, or until FCC certification are completed, whichever comes sooner. City: Taipei Name: Tracy Cheng Function: Senior Specialist Signature:

Edimax Technology Co Ltd Software Security Declaration FCC ID : NDD9578112209 Pursuant to:

FCC Part 15E 15.407(I) and KDB 594280 DO2 UNII Device Security v01r03 / IC RSS-247 issue 2 article 6.4(4). The information within this section is to show compliance against the SW Security Requirements laid out within KDB 594280 DO2 U-NII Device Security vO1r03. The information below describes how to maintain the overall security measures and systems so that only:

1. Authenticated software is loaded and operating on the device. 2. The device is not easily modified to operate with RF parameters outside of the authorization. SOFTWARE SECURITY DESCRIPTION General Description 1. Describe how any software/firmware updates for elements than can affect the devices RF parameters will be obtained, downloaded, validated and installed. For software that is accessed through manufacturers website or devices management system, describe the different levels of security as appropriate. The device driver can be download from edimax website and installed by end user. This driver only can be configured as a client and there is a country code regulatory parameter to limit user to operate the device outside its authorization in the U.S.. End-use cannot access that parameter. The RF parameters cannot be modified by software. 2. Describe the RF parameters that are modified by any software/firmware without any hardware changes. Are these parameters in some way limited such that any other software/firmware changes will not allow the device to exceed the authorized RF characteristics?

The RF parameters cannot be modified by software. 3. Describe in detail the authentication protocols that are in place to ensure that the source of the RF-related software/firmware is valid. Describe in detail how the RF-related software is protected against modification. No. The RF Parameters is put in read-only partition of DUTs flash and is only installed by the factory. RF parameters including frequency of operation, power settings, modulation type, antenna types or country code Settings will be locked in this partition. 4. Describe in detail any encryption methods used No encryption, but wifi driver is a Edimax Technology Co Ltd L to support the use of legitimate RF-related software/firmware. binary code file. 5. For a device that can be configured as a master and client (with active or passive scanning), explain how the device ensures compliance for each mode? In particular if the device acts as master in some band of operation and client in another; how is compliance ensured in each band of operation?

The device only can be configured as a client. And There is a country code regulatory parameter to limit product to operate the device under its authorization in the U.S. This regulatory parameter would define which channel would be available to operate in client fo meet UNII requirements. Edimax Technology Co Ltd SOFTWARE SECURITY DESCRIPTION Third-Party Access Control 1. Explain if any third parties have the capability to operate a U.S./Canada -sold device on any other regulatory domain, frequencies, or in any manner that may allow the device to operate in violation of the devices authorization if activated in the U.S./Canada. There is a country code regulatory parameter to limit user to operate the device outside its authorization in the U.S.. End-use cannot access that parameter. 2. Describe, if the device permits third-party software or firmware installation, what mechanisms are provided by the manufacturer to permit integration of such functions while ensuring that the RF parameters of the device cannot be operated outside its authorization for operation in the U.S./Canada. In the description include what controls and/or agreements are in place with providers of third-party functionality to ensure the devices underlying RF parameters are unchanged and how the manufacturer verifies the functionality. Note : See, for example, www.XXXXX.com/

The RF Parameters is put in read-

only partition of DUTs flash and there is not any installation process. RF parameters including frequency of operation, power settings, modulation type, antenna types or country code settings will be locked in this partition. End-user cannot access them. 3. For Certified Transmitter modular devices, describe how the module grantee ensures that host manufacturers fully comply with these software security requirements for U-NII devices. If the module is controlled through driver software loaded in the host, describe how the drivers are controlled and managed such that the modular transmitter RF parameters are not modified outside the grant of authorization. Note that Certified Transmitter Modules must have sufficient level of security to ensure that when integrated into a permissible host the devices RF parameters are not modified outside those approved in the grant of authorization. (See, KDB Publication 99639). This requirement includes any driver software related to RF output that may be installed in the host, as well as, any third-party software that may be permitted to control the module. _A full description of the process for managing this should be included in the filing. This is not a certified transmitter module device. Edimax Technology Co Ltd SOFTWARE SECURITY DESCRIPTION USER CONFIGURATION GUIDE 1. Describe the user configurations permitted through the Ul. If different levels of access are permitted for professional installers, system integrators or end-users, describe the differences. a. What parameters are viewable and configurable by different parties?

Note: The specific parameters of interest for this purpose are those that may impact the compliance of the device (which would be those parameters determining the RF output of the device). These typically include frequency of operation, power settings, antenna types, DFS settings, receiver thresholds, or country code settings which indirectly programs the operational parameters. Link Rate, Signal Strength, WiFi Security method and channel information. b. What parameters are accessible or modifiable by the professional installer or system integrators?

N/A, as this is a consumer device.

(1) Are the parameters in some way limited, so that the installers will not enter parameters that exceed those authorized?

Yes, all parameters are limited by SW settings which are approved by FCC regulatory. L

(2) What controls exist that the user cannot operate the device outside its authorization in the U.S./Canada?

All parameters are FCC approved and limited by SW settings. c. What parameters are accessible or modifiable by the end-user?

The RF Parameters is put in read-

only partition of DUTs flash and there is not any installation process. RF parameters including frequency of operation, power settings, modulation type, antenna types or country code settings will be locked in this partition. End-user cannot access them.

(1) Are the parameters in some way limited, so that the user or installers will not enter parameters that exceed those authorized?

Yes, all parameters are limited by SW settings which are approved by FCC regulatory. Edimax Technology Co Ltd

(2) What controls exist so that the user cannot operate the device outside its authorization in the U.S./Canada?

WiFi Security method, WLAN mode and channel selection. d. Is the country code factory set? Can it be changed in the UI?

All parameters are FCC approved and limited by SW settings.

(1) If it can be changed, what controls exist to ensure that the device can only operate within its authorization in the U.S./Canada?

The country code cannot be changed in UI. e. What are the default parameters when the device is restarted?

The device will get a default

(approved) Tx channel and power level based on factory country setting. Edimax Technology Co Ltd SOFTWARE SECURITY DESCRIPTION USER CONFIGURATION GUIDE 2. Can the radio be configured in bridge or mesh mode? _ If yes, an attestation may be required. Further information is available in KDB Publication 905462 DO2.

No. 3. For a device that can be configured as a master and client (with active or passive scanning), if this is user configurable, describe what controls exist, within the UI, to ensure If the device acts as a master in some bands compliance for each mode. and client in others, how is this configured to ensure compliance?

The device only can be configured as a client. And there is a country code regulatory parameter to limit product to operate the device under its authorization in the U.S.. This regulatory parameter would define which channel would be available to operate in client to meet UNI! requirements. 4. For a device that can be configured as different types of access points, such as point-to-point or point-to-multipoint, and use different types of antennas, describe what controls exist to ensure compliance with applicable limits and the proper antenna is used for each mode of operation. (See Section 15.407(a)) NA, as not supported by this device. Signature:

Date: 1/9/2023 Name/Title: Tray Cheng / Senior Specialist Company Name: Edimax Technology Co Ltd Address: No. 278, Xinhu ist Rd., Neihu Dist., Taipei City, Taiwan Tel: 886-2-7739-6639 Email: tracy@edimax.com.tw

Edimax Technology Co Ltd DATE : 1/9/2023 WIFI Channel 12 & 13 Declaration Letter To whom it may concern :

We have declared below featured for FCC equipment authorization in regard to 802.11b/g/n channel 12 & 13 operating capability for FCC ID : NDD9578112209 Please check ia Product hardware does not have the capability to operate on channel 12 & 13 Product hardware has the capability to operate on channel 12 & 13. I However , these 2 channels will be disabled via software and user will not able to enable these 2 channels Product hardware has the capability to operate on channel 12 & 13. And meeting KDB 594280 DO1 requirement. Pls explain detail here. Others Pls explain detail here. Signature FCC grantee contact person information. Name/Title: Tracy Cheng / Sanior Specialist Company Name: Edimax Technology Co Ltd Address: No. 278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan TEL: 886-2-7739-6639 FAX: 886-2-7739-6887 Email: tracy@edimax.com.tw