FOR AGES 10 AND UP INSTRUCTIONS / PRECAUTONS T M Battery Safety
- Y our Vectron Ultralite is only to be charged under adult supervision.
- Never expose the Vectron Ultralite battery pack to direct sun, hot areas, or fire as it may explode.
- T he Ultralite charger and battery may become warm during charging.
- T he Ultralite charging cord must be disconnected from the Vectron Ultralite when it is fully charged.
- Never leave your Vectron Ultralite connected to the AC adaptor overnight.
- Never overcharge the Vectron Ultralite as it can damage the rechargeable battery. Battery Care
- F or maximum performance, always allow your battery of the Vectron Ultralite to drain before recharging.
- Never charge a second time without discharging first. T his will affect or damage the battery. Battery Disposal
- Do not dispose of the battery in your regular household waste.
- C ontact your local waste management officials for information on environmentally sound disposal of rechargeable batteries.
- If a battery leak develops, avoid contact with leaking fluid. P lace the damaged battery in a plastic bag for proper disposal.
- If fluid comes in to contact with skin or eyes, wash with cool water for at least 15 mins. Battery Removal
- R emove the 3 screws on the top of the Vectron Ultralite with a P hilips screwdriver, disassemble the unit and remove the rechargeable battery.
(1) CLOSE OPEN
(2)
(3)
(4) TIPS:
- For your first flight, ensure there are no strong air currents from fans, air conditioners or open windows.
- Adjust the trigger to find the correct position so your Vectron Ultralite will hover preventing it from flying too high or too low. It will take some practice to get the hang of it.
- Always point the thrust transmitter towards your Vectron Ultralite to ensure a steady controllable flight.
- Do not try to land your Vectron Ultralite on to the launch platform. Try to land on any open floor area.
- Your Vectron Ultralite can also take off from any smooth flat surface. Do not try to take off from deep pile carpet or soft furniture. This may jam the propeller before take off. L earning More About Y our Vectron Ultralite T echnical S pecifications R ecommended Age
Vectron Ultralite
10 and UP F lying R ange 50 ft. (15 m) R echargeable B attery T ype 6 V 100mA Ni-MH
Working Voltage 5 V Working C urrent 8 W (P eak) Ultralite C ontroller B atteries 9V (6LR 61) alkaline batteries P ower C onsumption 0.3 W (P eak) Working Voltage (DC ) 6.5 V ~ 9 V Ultralite C harging Devices C harge Duration 10 minutes (max.) WARNING!
- C AUT ION: E lectrically operated product. Not recommended for children under 10 years of age. As with all electric products, precautions should be observed during handling and use to prevent electric shock.
- K eep face, eyes, fingers, hair, body parts etc. away from the propeller and other moving parts.
- Always fly the Vectron Ultralite in an open space.
- Do not expose your Vectron Ultralite to rain or moisture.
- Do not fly in a crowded environment.
- Do not fly in a dusty area.
- Do not fly in complete darkness.
- E nsure people know that you are flying the Vectron Ultralite.
- Use only your Ultralite controller included in this package.
- Always turn your Vectron Ultralite "OF F " when not in use. General
- Y our Vectron Ultralite must not be used if there is any damage to the AC adaptor, charging cord, charging socket, rechargeable battery, propeller, ring or other parts of the Vectron Ultralite.
- Do not attempt to lift objects with your Vectron Ultralite.
- Vectron Ultralite is a high tech precision instrument and is vulnerable to misuse P rotecting all components is an essential part of flight maintenance. AC Adaptor Important Information
- T his toy is not intended for children under 3 years old.
- T he instruction manual contains important information and must be kept.
- T his toy only operates with supplied AC adaptor.
- T he use of the AC adaptor should be supervised by an adult and examined regularly.
- T his toy must not be used if there is any damage to the power cord, plug and other parts of the transformer.
- T he AC adaptor must be disconnected before cleaning. 1 I) Thrust Transmitter P ower On Indicator Antenna II) Flight Preparation IMP OR T ANT :
a) Ensure the AC Adaptor voltage and plug is suitable for your area. b) Connect the AC Adaptor to the wall outlet. T rigger CLOSE OPEN 1) P lace your Vectron Ultralite on to the launch platform. 2) E nsure your Vectron Ultralite is switched OF F , then connect the charging cord to your V ectron Ultralite. NOT E S :
- The red and green LED will blink alternately. It will take approximately 10 minutes to charge your Vectron Ultralite completely; at this point the green LED will flash continuously.
- When your Vectron Ultralite is new or has not been flown for a long time it will take several charge/discharge cycles for the battery to reach its full flight time. Never recharge your Vectron Ultralite a second time WAR NING :
without having flown first. Continuous recharging without discharging first, will damage the Ultralite battery. CAUTION: Always recharge your Vectron Ultralite with supplied AC Adaptor! Operate with third-party AC Adaptor may cause damage to this product. C harge Method
- V detect plus master timeout I) AC Adaptor Output DC 13V 0.6A AC Adaptor Input 120V AC 60Hz 10W 1) Open or close the cover with a P hilips screwdriver. 2) Insert one size "9V" (6LR 61) Alkaline batteries. 3 8 5 6 Troubleshooting P roblem P os s ible C aus e S olution No power to the propeller. Y our AC Adaptor is the wrong type or damaged preventing it from charging your Vectron Ultralite. P ower switch is not turned on. C ontact your support team at service@ bhsciencetech.com stating the voltage and plug type required. Do not return your Vectron Ultralite to the retail store. S lide the power switch to the ON position. Y our Ultralite battery is not charged. C harge your battery fully before flying. T he propeller auto-stop feature is activated. T his feature is activated when the propeller is obstructed by body parts or objects. If your Vectron Ultralite crashes on to the floor, this may trigger the auto-stop feature as well. T he red and green LE D will blink alternately. R eset your Vectron Ultralite by switching it off and turning it back on again to resume flight. Battery Safety Guidelines
- T o prevent battery leakage: B e sure to insert batteries correctly.
- B atteries should be replaced by adult.
- Never dispose of batteries in fire as this may cause them to explode.
- Do not mix old and new batteries (replace all batteries at the same time).
- Do not mix Alkaline, standard (C arbon-Zinc) or rechargeable
(Nickel-C admium) batteries (or equivalent). Only batteries of the same Y our Vectron Ultralite does not take off. T he battery power is low. R echarge the battery fully. or equivalent type as recommended are to be used. Y our Vectron Ultralite is not placed properly onto the launch platform. Y our Vectron Ultralite is out of range. T he green LE D does not come on which means there is no signal transmission. T he trigger is not depressed far enough on the thrust transmitter. T he room may have drafts from windows, fans, air conditioner and ventilation systems. Operator error. P lace your Vectron Ultralite properly sitting in the middle of the launch platform. Move closer to your Vectron Ultralite. Depress the trigger at least half way. Minimize the drafts before take off. Wait for the red LE D to flash before trying to take off. Y our Vectron Ultralite does not respond to the thrust transmitter. T he thrust transmitter battery is low. T he red LE D does not flash after depressing the trigger. R eplace the 9V (6LR 61) Alkaline battery with new one. T he thrust transmitter battery is inserted improperly. C heck and reinsert the battery with the proper polarity as per the markings in the holder. Y our Vectron Ultralite is out of range. Move closer to your Vectron Ultralite. Y ou are outdoors or flying in a large room with high ceiling. F ly indoors with the appropriate ceiling height. NOTE : The trans parent labels underneath the ring are for protection agains t the propeller. A damaged ring can be repaired with trans parent tape. S ome glues may damage the polyfoam ring.
- Non-rechargeable batteries are not to be recharged.
- Always remove exhausted or dead batteries from product. R emove batteries from product which is not going to be used for a long time. Otherwise the batteries may leak and cause damage.
- T he supply terminals are not to be short-circuited.
- Make sure battery compartment is secure.
- Do not immerse battery operated toys. Wipe clean only. Attention to maximize the life of your Vectron Ultralite
- Avoid continuously running at full power against a low ceiling, as this will shorten the saucers motor life.
- nstead hover and swoop below ceiling height or fly outdoors if wind condition permits.
- T his will insure many hour of flying fun with your Vectron ultralite. III) Flying, Hovering and Landing Your Vectron Ultralite IMPORTANT: Ensure your Vectron Ultralite is fully charged for first time use and that you have a least 10 ft. (3 m) of clear area. Contents R ed LE D G reen LE D ON OFF C harging S ocket R ing P ower S witch
(ON / OF F ) With your Vectron Ultralite on 1) the launch platform, unplug the charging cord. 2) S witch on your Vectron Ultralite. NOTE: After the red and green LED blink alternately, the red LED will start to flash slowly. At this time your Vectron Ultralite is ready for take off. Auto-stop S afety P ropeller R echargeable B attery L aunch P latform r e t e m 5 1 15 meter T hrus t T rans mitter AC Adaptor 3) P ress the trigger to control your Vectron Ultralite. NOTE: Flying Range is around 50 ft.(15 m) 9 2 7 4