Owner's Manual BTR8801 o Contents Products and accessories 01 Product introduction02 Product instructions 03-09 G) TWS Pairing Button
.... 75%-100%
Ho 50%-75%
25%-50%
HOO eooo 5%-25%
,j)ooo <5%
Turn on / off Play /Pause /
Hands free VOL+
VOL-
Bluetooth next track last track Pairing
, ChargeYour BTR8801 _ o o o Oneflashing white o o o o Off Lo w battery Fu ll y c harged A To pre s erver battery h fes pan, f u l lych arge at least once eve ry45 days Charge USB Devices Turn on/Off 3
Bluetooth Pairing f Power button
- `Turn on/ of COV-S6 B lu e too th P a irin g Press and ho l d the button to switch on Press the Bluetooth button begins to connect Turn on your wire less device, search for
"COV-S6", and pair with it. You will hear a prompt tone when Bluetooth is connected succe ssf ull y. You can play music on your device through the speaker. AUX Audio Input
Sound line AUX cable sold separately Connect a 3.5mm audio cable to your phone's/computer's headphone output port, you can control music on your phone or computer. To return to Bluetooth mode,remove the AUX cable form your SoundCore TF/Micro SD Audio Input _ The speaker is compatible with TF cards of up to 32GB and can directly play MP3 and WMAaudio files. lnsert a compatible card into the slot underneath the speaker, and the unit will automatically switch to TF mode and Automatically play the music on the card. You can use the media controls on the front of the team to play, pause and navigate between tracks on the card. TWS Pairing Button Play/Pause/
Hands free next track last track VOL+
VOL-
Play/Pause/Hands free VOL + / next track Click to increase volume. Press and hold the button fornext track. 2. VOL - / last track Click to decrease volume. Press and hold the button for previous track. TWSPamngButton Click start or cancel TWS interconnection. Note: Please enable pairing mode before bluetooth mode Bluetooth Pairing Bluetooth Pairing TWSPairing Button turn on the 2 Bluetooth speakers, press the Bluetooth of the 2 speakers to get the bluetooth mode (Do not connect the Bluetooth Speaker to the cell phone at this time) press the TWS key of either speaker
(this speaker is the master speaker). After the sound prompt, the pairing is successful. 9 Specification ProductModel:COV-S6 Charging Voltage:SV-lA Technology:BTS.O,ASDP,AVRCP,HSP,HFP Product Dimensions:6.7 in'2.95 in'2.95 in Wireless Transmission Distance :Up to 10m/33Ft Product Weight:1.1 LB Impedance:40 Standby Time:90 days Microphone Sensitivity:42 dB 3dB PlayTime:24hrs (at50%volume) Frequency Response Range:80Hz-20KHZ Talk Time:12hrs Speaker:l.9in Supported Features:Wireless,audio input,TFcard internal magnetic4012W Output Power:12W X 2 Distortion:! %
Signal To Noise Ratio:> 70dB Battery Type:Li-ion (4600mAh 3.7V) Waterproof Rating:IPX7 FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.