INSTRUCTION MANUAL COLOR MONITOR Model No. : EFL-1702X www.effinet.co.kr Table of Contents IMPORTANT SAFEGUARDS ..................................................... 3 QUICK REFERENCE TABLE OF CHARACTERISTICS.......... 4 KEY & OSD CONTROL................................................................. 5 KEY & OSD CONTROL................................................................. 6
. STANDARD DISPLAY MODE ................................................. 8 INSTRUCTION MANUAL EFL-1702X 2 IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use attachments not recommended by the monitor manufacturer as they may cause hazards. 5. Do not use this monitor near water, e.g., near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. 6. Do not place this monitor on an unstable cart, stand, or table. The monitor may fall, causing serious injury to a child or adult, and serious damage to the appliance. 7. This monitor should be operated only from the type of power source indicated on the marking label. If you are not sure of the power supplied to your home, consult your monitor dealer or local power company. 8. For added protection for this monitor during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the monitor and/or the computer due to lightning and power line surges. 9. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 10. Never push objects of any kind into this monitor through cabinet openings, as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the monitor. 11. Do not attempt to service this monitor yourself, as opening or removing covers may expose you to dangerous voltages or other hazards. Refer all servicing to qualified service personnel. 12. Unplug this monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the monitor. c. If the monitor has been exposed to rain or water. d. If the monitor does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore normal operation. e. If the monitor has been dropped or the cabinet has been damaged. f. When the monitor exhibits a distinct change in performance, this indicates a need for service. 13. When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 14. Upon completion of any service or repairs to this monitor, ask the service technician to perform routine safety checks to determine that the monitor is safe to operate. INSTRUCTION MANUAL EFL-1702X 3 QUICK REFERENCE TABLE OF CHARACTERISTICS EFL-1702X 17 Diagonal 337.92 x 270.34 mm Display Size Active Area Type No. Samsung LTM170E6 LG-Philips LM170E1 1280 (H) x 1024 (V) 0.264 mm x 0.264 mm 16.7M True Color Hard Coating (3H), Haze 25%
Horizontal Vertical Typ. 450 : 1 Rise time(tr) : 15ms / Fall time(tf) : 10ms L : 85 / R 85 H : 85 / L 85 Typ. 230 cd/ m2
(WHD) 383.5 x 306.0 x 22.8 mm 4 Lamps(2 Dual) 30 ~ 80KHz 50 ~ 75Hz 720x400 @70 Hz, 640x480 @60/67/72/75 Hz 800x600 @56/60/72/75 Hz, 832x624 @75 Hz 1024x768 @60/70/75 Hz 1280x1024 @60/75 Hz AC 90 ~ 265V @60/50Hz, Universal Power 34Watts Temperature : 10 to 50C Humidity : 8 to 80%
Temperature : -20 to 70C Humidity : 5 to 90%
9300K : CIE x=0.2810.015 / y=0.3110.015 6500K : CIE x=0.3130.015 / y=0.3290.015 More than 20,000 hours CUL(UL+CSA), CE, FCC Optional Number of Pixels Pixel Pitch Color Depth Surface Treatments Viewing Angle
(degrees) Contrast Ratio Response Time(Typ.) Average Brightness Panel Dimension CCFT Horizontal Vertical Standard AC Input Max. Power Dissipation Operating Storage Panel Scanning Frequency Power Environmental Conditions White Color Temperature Demonstrated MTBF Regulation Touch Screen INSTRUCTION MANUAL EFL-1702X 4 KEY & OSD CONTROL UP LED MENU DOWN MENU UTILITY PICTURE brightness Cable Connect SEL
(AUTO) MENU : Launch OSD (On-Screen Display) MENU window and select the Menu Page SEL
: Move the cursor in the PICTURE / UTILITY mode.
(AUTO) Auto Tracking (pressing SEL key for 2 seconds) UP : Increase the value of the selected function. DOWN : Decrease the value of the selected function. contrast 80 sharpness 4 h position 50 v position 50 18 phase
frequency 1056
normal mode 6500 7300 9300 user english german
1 2 3 4 5
fill to aspect ratio PICTURE UTILITY press <up> to reset 800 x 600 / 60Hz power on time information color temp language SELECT factory 10 hr 100
INSTRUCTION MANUAL EFL-1702X 5 KEY & OSD CONTROL OSD Control Functions Control Function Auto Tracking Automatic screen adjustment process. If there is any noise on the screen or screen shift, just press SEL button for more than two(2) seconds. Since this monitor is equipped with Auto Tracking function, it will automatically configure the monitor setting. Brightness Adjust the brightness level of the Display. Contrast Adjust the contrast level of the Display. Sharpness Adjust the sharpness level of the Display H position Adjust the position of the display horizontally. V position Adjust the position of the display vertically. Phase Adjust the clock phase of the display. Frequency Adjust the clock frequency of the display Mode COLOR TEMP Select the video aspect ratio. It depends on the input video format. Choose different preset color temperatures (6500/7300/9300) or set your own customized color parameters. Red/Green/Blue Gain Adjust the Red/ Green / Blue Gain Language Select the OSD language Factory recall Recall the factory setting value. Power On time Displayed the total power on time. Information Displayed the resolution of input signal INSTRUCTION MANUAL EFL-1702X 6 1. Signal(VGA) Cable 1-1) 15pin D-sub type Connector Shape Pin Description Pin Description 6 1 1 Red 2 Green 3 Blue 4 Ground 5 Ground 9 No Connection 10 Ground - Sync 11 Ground - Sync 12 No Connection 13 Horizontal Sync 15 5 6 Ground - Red 14 Vertical Sync 7 Ground - Green 15 No Connection 8 Ground - Blue 1-2) 13pin Board-In type Connector Shape Pin Description Pin Description 1 GND 2 3 SDA SCL 9 Signal - Blue 10 Ground - Blue 11 Vertical Sync 4 Ground 12 GND 5 Signal- Red 13 Horizontal Sync 6 Ground - Red 7 Signal - Green 8 Ground - Green 1 13 1 INSTRUCTION MANUAL EFL-1702X 7
. STANDARD DISPLAY MODE No. Mode Resolution Frequency Polarity Frequency Polarity Horizontal Vertical 720 x 400 31.47 KHz 640 x 480 31.47 KHz VGA 640 x 480 35.00 KHz 640 x 480 37.86 KHz 640 x 480 37.50 KHZ N N N N N 70.0 Hz 60.0 Hz 66.7 Hz 72.8 Hz 75.0 Hz P N N N N Pixel clock 28.322 MHz 25.175 MHz 30.240 MHz 31.500 MHz 31.500 MHz 800 X 600 35.16 KHz N / P 56.3 Hz N / P 36.000 MHz 800 X 600 37.88 KHz SVGA 800 X 600 48.08 KHz 800 X 600 46.87 KHz 832 X 624 49.73 KHz 1024 X 768 48.36 KHz XGA 1024 X 768 56.49 KHz 1024 X 768 60.02 KHz SXGA 1280 X 1024 63.98 KHz 1280 X 1024 79.98 KHz P P P N N N P P P 60.3 Hz 72.2 Hz 75.0 Hz 74.6 HZ 60.0 Hz 70.1 Hz 75.0 Hz 60.0 Hz 75.0 Hz P P P N N N P P P 40.000 MHz 50.000 MHz 49.500 MHz 57.284 MHz 65.000 MHz 75.000 MHz 78.750 MHz 108.00 MHz 135.00 MHz 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 INSTRUCTION MANUAL EFL-1702X 8 FCC RF INTERFERENCE STATEMENT NOTE :
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected.
- Consult the dealer or an experienced radio, TV technical for help.
- Only shielded interface cable should be used. Caution Do not change or modify the product without permission or authority of manufacturer. It may cause undesirable operations, permanent damages or harmful interferences
. Notice Design and specification are subject to change without notice for product improvement purposes. INSTRUCTION MANUAL EFL-1702X 9