FCC ID: 2AF46DSPREV1-3B Module Radar (field sensor) 24GHz band

USER GUIDE ANTENNA MODULE REV1-3B 1/7 FCC APPROVAL FCC 2-parts warning statement under 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Modification statement 15.21 The user manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC APPROVAL

(EN) Warning: This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

(FR) Attention: Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 2/7 WARNING RF Emission

(EN) Warning: This module contains radio-frequency transceivers and antennas which emits and receive in the 24GHz frequency band. This module can interfere with and its functionality can be impacted by other nearby equipment operating in the same frequency band.

(FR) Attention: Ce module contient des metteurs-rcepteurs et antennes qui mettent et reoivent dans la plage frquentielle de 24GHz. Ce module peut interfrer et ses fonctionnalits peuvent tre altres par de lquipement avoisinant oprant dans la mme plage frquentielle. RF Exposure

(EN) Warning: Exposure to Radio Frequency Energy: The radiated power output of the radar module is below the RF exposure limits for uncontrolled exposure. This device should be operated with a minimum distance of at least 20 cm between the antenna and a persons body.

(FR) Attention: valuation d'exposition aux RF: Lintensit de champ RF mis par la carte radar est inferieures aux limites d'intensit de champ RF prvues pour lenvironnement non contrl. Les dispositifs un lment rayonnant fonctionnant normalement des distances de sparation entre l'utilisateur et le dispositif suprieures 20 cm. Other warnings Manufacturers of mobile or fixed devices incorporating ANTENNA MODULE REV1-3B modules are authorized to use the FCC Grants and IC Certificates of the ANTENNA MODULE REV1-3B modules for their own final products according to the conditions referenced in these documents. In this case, the FCC label of the module shall be visible from the outside, or the host device shall bear a second label stating, "Contains FCC ID: 2AF46DSPREV1-3B". Label also mentions Contains IC ID: 20796-DSPREV13B

(EN) Warning: Changes or modifications made to this equipment not expressly approved by ELANCITE TECHNOLOGIES may void the FCC authorization to operate this equipment,

(FR) ATTENTION : Toute modification sur ce produit, n'tant pas expressment valide par ELANCITE TECHNOLOGIES peut annuler l'autorisation FCC d'utiliser cet quipement. 3/7 1. Description The ANTENNA MODULE REV1-3B is dedicated to speed measurement of various moving objects. Its high-quality antenna permits to mesure speeds with a range of 250 meters and an average angle of 30 (Azimut and Elevation @-3dB) Especially studied for cars speed measurement, the firmware offers reliable and easy to use communication protocol. High quality French manufacturing. The antenna module consists in an antenna for measurements and a high-speed DSP processor for fast calculation. On board power regulation. For an ease of use : unique connector for power and data. As the product uses IPS-937 antenna from manufacturer INNOSENT, it is labelled as follow :

Contains:

FCC ID: UXS-IPS937 IC: 6902A-IPS937 4/7 2. Antenna informations The product uses INNOSENT IPS-937 ANTENNA, specs as follows :

FCC ID: UXS-IPS937 IC: 6902A-IPS937 5/7 3. Power specifications Power source : DC Power voltage : 9 15 (V) Max power consumption : 2,7 (W) See part4 for cable connection specs. 4. Cable specifications Ground TX signal Rx signal Power 4 3 2 1 4 3 2 1 Cable connector references ;

BOITIER CST 100 4 PTS RS : 293 0048 CONTACT ETAME CST 100 RS : 293 0098 ANTENNA MODULE REV1-3B uses only one connector for data and power. Onboard connector 6/7 5. Mechanical specifications 7/7

Elancit >

ANTENNA MODULE REV 1-38 LABELING Labeling example: [ myn: ~ | :

ANTENNA MODULE Contains:

REV1-3B | FCCID:

| FCCID: | UXS-IPS937 2AF46DSPREV1-38, |, ICID: ie 20796-DSPREV138 | 6902A-1PS937 Size (20*20 mm) Background color : White. Board w/ label :

Socidt& responsabie lite 7.0240.1601.14 2u capital de 100 000,00 F.0240.16.0273 Sire 483 008 439 000 34 contact@elancite fr CS: Nantes 483 008 439 sewn elancite fr

Modular Approval Request - FCC RE: Request for modular approval Model: ANTENNE MODULE REV 1-3B FCC ID: 2AF46DSPREV1-3B To whom it may concern, We formerly request modular approval on the above reference device pursuant to the requirements of FCC publication 996369 D01 for modular approval of Part 15 devices. Modular approval requirement Yes No Comment*

(a) The radio elements of the radio frequency circuitry must be shielded. Physical/discrete and tuning capacitors may be located external to the shield, but must be on the module assembly.

(b) The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable FCC rule part under conditions of excessive data rates or over-

modulation.

(c) The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module.

(d) The module must certified with specific antennas and these antennas must be contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s).

(e) The module shall be tested for compliance with the applicable standard in a stand-alone configuration, i.e. the module must not be inside another device during testing.

(f) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display.

(g) The module shall comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions provided by the grantee.

(h) The module must comply with RF exposure requirements

* Please provide a detailed explanation for each item Based on the above information this request is for:

LIMITED SINGLE modular approval. Sincerely, RUBLON MICHAEL 11/01/2022 ELANCITE 12 ROUTE DE LA GARENNE 44700 ORVAULT, FRANCE Socit par actions simplifies Au capital de 100 000 Siret : 483 008 439 00034 RCS : Nantes 483 008 439 Tel 02.40.16.01.14 Fax 02.40.16.02.73 contact@elancite.fr www.elancite.fr Zone industrielle de la pentecte 12 Router de la Garenne 44700 ORVAULT Socit par actions simplifies Au capital de 100 000 Siret : 483 008 439 00034 RCS : Nantes 483 008 439 Tel 02.40.16.01.14 Fax 02.40.16.02.73 contact@elancite.fr www.elancite.fr Zone industrielle de la pentecte 12 Router de la Garenne 44700 ORVAULT