FCC INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 0f the FCC Rules. These limits are designed to provide reasonable protection against harmful interference m a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. Modifications not authorized by the manufacturer may void users authority to operate this device. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Battery Recharge The unit has a built in DC 3.7V, Lithium-ion rechargeable battery, which recharges as follow:
1. Connect the unit to the computer or any USB charger by the supplied USB cable as:
Inset the small plug from the supplied USB cable to the Mini USB Port on the unit, insert the other plug to the USB Port on the Personal Computer or any USB Charger having DC 5V, 300mA (or more than 300mA) output. 2. During charging, the red indicator will turn on. When finished ,it will turn off. Notes:
Your battery will last longer if you following these simple guidelines for charging and storing. A. For charging first time, charge it at least 10 hours. B. Recharge and store the unit within the temperature range of 5C~35C (40F~95F). C. Do not over charge (longer than 24 hours). Excessive charging or discharging may shorten the battery's life. D. Battery life naturally shortens slowly over time. E. During charging, you can play the music at the same time. F. The rechargeable battery incorporated in this product is not user replaceable. OPERATING INSTRUCTIONS Location of Controls:
OFF ON DC IN DC 5V 300mA 1 2 MIC 3 4 5 6 7 8 1. AUX In jack 2. Mini USB Port 3. Built-in Microphone 4. - :Skip Backward/ Volume Down Button 5. : Hook ON-OFF/ Play/ Pause Button 6. + : Skip Forward/ Volume Up Button 7. Indicators 8. Power ON/OFF Switch BT (Blue tooth) mode In first time use or re-pairing to new BT device, pairing the unit to external BT device as below:
1. Slide the Power ON/OFF Switch to ON position. Blue Indicator will light and blinking. PLEASE READ BEFORE OPERATING THIS EQUIPMENT. OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS 2. Power on the external BT device and enter to searching mode. Start pairing as the on screen instructions on the external BT device. After paired, the blinking frequency of the indicator will slow down. (For details pairing procedures, please refer to the users manual of your BT device). Notes:
When the external BT device searched the unit, our model number CMA 3568 will appear on the display of external BT device. Pairing code 0000 may need to enter. Normal operation after pairing:
1. Turn on the BT function of the external BT device. 2. Slide the Power ON/OFF Switch to ON position to power on the unit. Wait until the blinking frequency of blue indicator is slow down. (It needs take a few seconds). 3. Plays the music in the paired BT device as usual. 4. During Playback:
Press and hold the - or + Buttons to adjust volume level. Press the button to pause; press again to resume normal playback. Press and release the - or + Button repeatedly to skip tracks. 5. If the unit is paired to Cell Phone:
When a call is incoming during listening, press the Button to hook off then speak to the built in microphone to answer the phone. When finished, press the Button to hook on then resume to music playback. 6. When finished listening, slide the Power ON/ OFF Switch to OFF position to shut off the unit. AUX mode 1. Connected the 3.5mm jack on the supplied connection cable to the AUX Out/Line Out/phones jack on any external audio player, connect the another 3.5mm jack to AUX In Jack on the unit. 2. Slide the Power ON/OFF Switch to ON position to power on the unit, Blue Indicator is light. Plays the music in the connected Player as usual. 3. During Playback:
Press and hold the - or + Buttons to adjust volume level. 4. When finished listening, slide the Power ON/OFF Switch to OFF position to shut off the unit. IMPORTANT: If the Audio Connection Cable inserted into the AUX In Jack, BT will cut off automatically. Unplug it before use BT. Specification:
Power source-----Built in DC 3.7V, Lithium-ion rechargeable battery. Recharge by DC 5V, 300mA from Computer or USB Charger through Mini USB jack (Computer and USB Charger not included). Battery life--------Approximate 4 hours for music playback Audio Output Power------1.4W RMS Speaker Impedance------4 Ohm, 3W Noted: The specifications are subject to change without notice. Accessories:
1 x USB Connection Cable (For charging only) 1 x Audio Connection Cable with 3.5 mm Stereo Mini Plugs Craig Craig warrants this product to be free from manufacturing defects in material and workmanship under normal use for a period of 90 days from date of purchase. If service is required, please return the product to the store where it was purchased for exchange; or, pack the unit in the original packing material with all accessories if applicable, a copy of your sales receipt and a Cashiers check or Money Order for $7.00 (to cover shipping and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please make sure that the cashier check or money order is redeemable through a U.S. bank. Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit can not be repaired or replaced, a refund will be forwarded to you within four weeks of receipt of your unit. Please ship your unit to:
Craig Electronics Inc. 1160 NW 163 Drive Miami, Fl 33169 This warranty is void if the product has been: a) Used in a commercial application or rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by anyone other than an authorized Craig service center. d) Damaged because it is improperly connected to any other equipment. Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owners Manual which can be performed by the customer. b) Damage to equipment not properly connected to the product. c) Any cost incurred in shipping the product for repair. d)Damage to the product not used in the USA. This warranty is not transferable and only applies to the original purchase. Any implied warranties, including the warranty of merchantability, are limited in duration to the period of this expressed warranty and no warranty whether expressed or implied shall apply to the product thereafter. Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state. Some states do not allow limitations on implied warranties or exclusion of consequential damage. Therefore, these restrictions may not apply to you. To Obtain Service on your Product email:service@craigelectronics.com Printed in China CMA3568_WC_E0GH1_B0US