FCC ID: 2APEW-2G505B ESR HaloLock Wireless Power Bank

2G505B 65*96MM_80G_4C 9-V1 EN Tap and charge FR Fixer et charger EN Adjustable kickstand IT Appoggiare e ricaricare DE Auflegen und los laden ES Tocar y cargar RU PT PL Bater e carregar Nacinij i zacznij adowa RU IT ES Cavalletto regolabile Pie de apoyo ajustable 0-70 FR DE PT PL Bquille rglable Verstellbarer Stnder Suporte Ajustvel EN IT ES Hold for 3 seconds to turn off Tenere premuto per 3 secondi per spegnere Mantener presionado durante 3 segundos para apagar Regulowana podstawka RU KO JP KO JP KO 3s FR DE PT PL JP SC TC SC TC SC 3s TC 3s SC USB-C AR AR AR 3 AR USB-C Status Light Guide EN SC Wireless output USB-C output USB-C input Error detected USB-C USB-C Important Reminders 1. The power bank only supports magnetic attachment with a caseless iPhone with MagSafe, an ofcial MagSafe case, an ESR HaloLock case, or a standard case with a HaloLock Universal Ring. It may not attach to other magnetic cases. It will not attach to any other non-magnetic phones or cases. 2. While the power bank is being charged, it can still wirelessly charge your phone. The maximum output of the power bank is 15W for wireless charging. The USB-C port has a maximum input of 18W and a maximum output of 20W. 1. MagSafeiPhone/ESR 2. USB-C15WUSB-C 18W20W EN Wired charging FR Charge filaire DE PT PL Kabelgebundenes Laden Carregamento por cabo adowanie przewodowe JP TC Safety Warnings 1. Only use this device in temperatures between 32F (0) and 104F (40C). 2. Do not expose the device to an open ame or submerge it in water to avoid damaging the device. 3. Always check for damage to the device, cables, or other accessories before using the device. If damaged, do not use the device. 4. Do not attempt to disassemble or modify the device in any way, as it may cause serious damage and void the warranty. 5. Do not expose the device to corrosive liquids or high humidity as they will seriously damage the device and void the warranty. 6. Do not use low quality or damaged cables or adapters as they may cause damage. 1. 0-40 2. 3. 4. 5. 6. 3 sec. Maintenez 3 secondes pour arrter Zum Ausschalten 3 Sekunden lang gedrckt halten Suporte Ajustvel IT ES Ricarica via cavo Carga por cable Przytrzymaj przez 3 sekundy, aby wyczy RU 3 KO USB-C FCC ID: 2APEW-2G505B This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC: 24790-2G505B This device complies with Industry Canada licence-exempt RSS standard( s). Operation is subject to the following two conditions:

(1)this device may not cause interference, and

(2)this device must accept any interference, including interference that may cause undesired operation of the device."

Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1)l'appareil nedoit pas produire de brouillage, et

(2)l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."

ESR HaloLock Wireless Power Bank MODEL: 2G505B This product complies with the radio interference requirements of the European Community. Declaration of Conformity EN This product is intended for use within Europe. Electronic Silk Road Corp. hereby declares that this product 2G505B is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU,2014/35/EU,2014/30/EU. The Declaration of Conformity for the 2G505B is available from www.esrgear.com FR Dclaration de Conformit Ce produit est destin tre utilis en Europe. Electronic Silk Road Corp. dclare par la prsente que ce produit 2G505B est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/UE,2014/35/UE,2014/30/UE. La dclaration de conformit pour le 2G505B est disponible sur www.esrgear.com IT Dichiarazione di conformit Questo prodotto destinato all'uso in Europa. Electronic Silk Road Corp. dichiara che questo prodotto 2G505B conforme ai requisiti essenziali e alle altre disposizioni pertinenti della direttiva 2014/53/UE,2014/35/UE,2014/30/UE. La dichiarazione di conformit per il 2G505B disponibile su www.esrgear.com Konformittserklrung DE Dieses Produkt ist fr die Verwendung in Europa vorgesehen. Electronic Silk Road Corp. erklrt hiermit, dass dieses Produkt 2G505B die wesentlichen Anforderungen und andere relevante Bestimmungen der Richtlinie 2014/53/EU, 2014/35/EU, 2014/30/EU erfllt. Die Konformittserklrung fr 2G505B ist unter www.esrgear.com erhltlich. ES Declaracin de conformidad Este producto est diseado para su uso dentro de Europa. Electronic Silk Road Corp. declara por la presente que este producto 2G505B cumple con los requisitos esenciales y otras disposiciones relevantes de la Directiva 2014/53/EU, 2014/35/EU, 2014/30/EU. La Declaracin de conformidad para el 2G505B est disponible en www.esrgear.com PL Deklaracja zgodnosci Ten produkt jest przeznaczony do uzytku w Europie.Firma Electronic Silk Road Corp. niniejszym oswiadcza,ze ten produkt 2G505B jest zgodny z podstawowymi wymaganiami i innymi stosownymi postanowieniami dyrektyw 2014/53/UE,2014/35/UE,2014/30/UE Deklaracja zgodnosci 2G505B jest dostepna na stronie www.esrgear.com This symbol indicates that this product shall not be treated as household waste.Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Scan to watch a quick setup video esrgear.com/faq/2g505b Scannen Sie, um ein Video zur schnellen Einrichtung anzusehen

Electronic Silk Road (Shenzhen) Tech Co., Ltd 439, Building A7, Fuhai Xinxigang, Xinhe Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Agent Authorization Company: Electronic Silk Road (Shenzhen) Tech Co., Ltd Address: 439, Building A7, Fuhai Xinxigang, Xinhe Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Product Name: ESR HaloLock Wireless Power Bank Model Number(s): 2G505B, 2G512B Product Description: ESR HaloLock Wireless Power Bank We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: Aug. 23, 2023 Name:

Serena Jiang Title:

General Manager Company: Electronic Silk Road (Shenzhen) Tech Co., Ltd

Electronic Silk Road (Shenzhen) Tech Co., Ltd 439, Building A7, Fuhai Xinxigang, Xinhe Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-22-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2APEW-2G505B

[Electronic Silk Road (Shenzhen) Tech Co., Ltd] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Serena Jiang)

Electronic Silk Road (Shenzhen) Tech Co., Ltd 439, Building A7, Fuhai Xinxigang, Xinhe Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-22-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2APEW-2G505B

[Electronic Silk Road (Shenzhen) Tech Co., Ltd] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Serena Jiang)

Electronic Silk Road (Shenzhen) Tech Co., Ltd 439, Building A7, Fuhai Xinxigang, Xinhe Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Aug. 23, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: 2APEW-2G505B Models: 2G505B, 2G512B To Whom It May Concern:

We, The Electronic Silk Road (Shenzhen) Tech Co., Ltd hereby declare that the model : 2G505B is identical with the model : 2G512B, Different model names result in different appearance colors. The 2G512B model does not have a bracket on the back. Except for the different above, no other modification is performed. Sincerely, Electronic Silk Road (Shenzhen) Tech Co., Ltd Signature:

[Serena Jiang, General Manager]

Electronic Silk Road (Shenzhen) Tech Co., Ltd 439, Building A7, Fuhai Xinxigang, Xinhe Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2APEW-2G505B Date: Aug. 22, 2023 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Antenna Specification_Confidential In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Serena Jiang Title: General Manager

Electronic Silk Road (Shenzhen) Tech Co., Ltd 439, Building A7, Fuhai Xinxigang, Xinhe Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Declaration Letter Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2APEW-2G505B 8/24/2023 Pursuant to KDB 680106 of the Electronic Silk Road (Shenzhen) Tech Co., Ltd. Hereby declare our product which is an inductive wireless power transfer applications that meet all of the following requirements are not required to submit a KDB inquiry for devices approved usinga PAG for equipment approved using certification to address RF exposure compliance. 1) Power transfer frequency is 110.5-148kHz which is less than1 kHz 2) Output power from each primary coil is equal to 15 watts max 3) The system consist of one source primary coils, charging one clients. 4) Client device is placed directly in contact with the transmitter 5) The EUT is a mobile and portable device. 6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yours sincerely, Company Officer: Serena Jiang Telephone Number: +86-15019213421 Email: yongqin.jiang@esrgear.com

Section 2.911(d)(7) USA Agent for Service of Process Company name: Electronic Silk Road (Shenzhen) Tech Co., Ltd Address439, Building A7, Fuhai Xinxigang, Xinhe Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China:

Product Name: ESR HaloLock Wireless Power Bank FCC ID: 2APEW-2G505B Model(s): 2G505B, 2G512B 2.911(d)(7) USA Designated Agent for Service of Process We, [Electronic Silk Road (Shenzhen) Tech Co., Ltd] (the applicant) designate

[Sahara Case LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Sahara Case LLC Address: 199 E 52nd St, Suite 100, Garden City, ID 83714, USA FRN0033710385 Contact Name: Paul Babichenko Telephone No: (208) 941-3448 Email: saharacasellc@outlook.com Applicant Company name: Electronic Silk Road

(Shenzhen) Tech Co., Ltd Address: 439, Building A7, Fuhai Xinxigang, Xinhe Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Contact Name: Serena Jiang Telephone No:+86-15019213421 Email: yongqin.jiang@esrgear.com Signature:

Signature:

2.911 (d)(7)USA Agent v1.2 Title: Sr. Finance & Operations Date:2023.8.23 Title: General Manager Date:2023.8.23 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2