CAUTION This product is restricted for occupational use and is not intended or authorised for use by the general population. It is the responsibility of the person operating the product to ensure that it is operated safely at all times, and that local laws and regulations governing the usage of Radio Frequency (RF) products are observed. Users must be trained to operate this product safely. Their personal safety could be affected if they do not understand how to operate this product correctly. Radio Frequency informations This product must be restricted to operations in an Occupational/Controlled RF exposure Environments. Users should be informed of the potential health risks associated with long term exposure to RF energy by their employer. Radio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio signals are transmitted. RF technology is widely used in communication, medicine, food processing and other fields. It may generate radiation during use. In order to ensure user health, experts from relevant industries including science, engineering, medicine and health work with international organizations to develop standards for safe exposure to RF radiation. Any transmission from this unit must be with a frequency allocated by local regulator. A carefull check must be provided before connecting an antenna to the unit. Servicing and accessories Only accessories approved by Etelm are recommended for use with this product. Always read the instructions supplied with the accessory for additional safety instructions. Unauthorised modifications to the product could cause the product to become non-operational and void any product warranty. The use of non-approved accessories may invalidate any product warranty and may compromise the product safety ratings Do not attempt to dismantle this product. Servicing and repairs of the product must be done by trained service technicians at Etelm. FCC Regulations Federal Communication Commission (FCC) requires that all radio communication products should meet the requirements set forth in the above standards before they can be marketed in the U.S, and the manufacturer shall post a RF label on the product to inform users of operational instructions, so as to enhance their occupational health against exposure to RF energy This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for a controlled environment. The antenna should be installed and operated with minimum distance 1.0m from human body. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. Safety Information Page 1 / 2 CAUTION IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Installation and Operation Guide Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The term IC: before the certification/registration numbers only signifies that the Industry Canada technical specifications were met. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Le terme IC: plac avant les numros de certificat/enregistrement signifient que conformment la rglementation d'Industrie Canada. Le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This equipment complies with IC RF radiation exposure limits set forth for an controlled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna should be installed and operated with minimum distance 1.0m from human body. Le prsent appareil est conforme aux normes dIC concernant les limites dexposition aux rayonnements RF tablies pour un environnement contrl. Cet metteur ne doit pas tre co-localis ou oprant en conjonction avec toutes autres antennes ou metteurs. L'antenne doit tre installe et utilise avec un minimum de 1,0 m de distance dun corps humain. Environmental Protection Electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. By ensuring that this product and its packaging is disposed of correctly, you will help prevent potentially negative consequences for the environment and human health, and help conserve natural resources. EU Regulatory Conformance Etelm declares that the product is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/ EC. Please note that the above information is applicable to EU countries only. Safety Information Page 2 / 2