UART-RF-Stick 915 28 010 0903 - Integration Manual FCC / IC FCC ID: YBU28010X9X3 IC: 8929A- 280101X9X3 USA (FCC) Part 15 Statement gem. FCC 15.19/RSS Gen Issue 3 Sect. 7.1.3 This device (elero UART-RF-Stick 915) complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. General Product description The elero UART RF Stick 915 is a radio receiver for the elero ProLine 2 radio system. serves as a receiver module for devices for home automation such as drives for roller shutters, Venetian blinds, curtains or lighting systems and heater systems. module and antenna. is constructed as a PCB device with integrated radio does not have its own housing. communicates with the target product via a UART interface and via the integrated radio module with the elero ProLine 2 radio system. offers the full functionality of an elero ProLine 2 radio receiver such as automatic functions. The routing function is also integrated. Intended use The elero UART RF Stick 915 can be used in the intended home automation devices such as drives for roller shutters, Venetian blinds or lighting systems and heater systems. The devices also have a suitable slot for the UART RF Stick 915. Exclusion of liability elero GmbH accepts no liability for injury, damage or financial losses arising from modifications to the device, improper use or a failure to observe the operat-
ing instructions. Liability for material defects is exclud-
ed in such cases. Technical data Product designation Operating voltage [V] DC Transmission frequency
[MHz]
Transmitting power [dBm]
Operating temperature range
[C]
Dimensions [mm]
Item No. Contains FCC ID Contains IC UART RF Stick 915 2.7 ... 3.0 ... 3.6 915 (band) 1 (decibel milliwatt) 0 ... 50 42.5 x 19.5 28 010.0903 YBU28010X9X3 8929A-28010X9X3 Canada, Industry Canada (IC) Le prsent appareil (elero UART-RF-Stick 915) est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est sus-
ceptible den compromettre le fonctionnement. Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Information:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV techni-
cian for help Connection and installation See operating manual of the target product. Manufacturers address elero GmbH 72660 Beuren GERMANY www.elero.com Service If faults should occur despite proper operation or if the device is damaged, contact your dealer or the manufacturer. 138204501_EN_0716 Label requirements for the target device The target product must be labeled with the following three specifications:
Contains FCC ID: YBU28010X9X3 Contains IC: 8929A-28010X9X3 This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS stan-
dard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.