Elettronica GF s.r.l. Via Ca Bianca, 10 - 48018 - FAENZA (RA) ITALY Tel. (+39) 0546 622245 Fax (+39) 0546 622301 IVA Cod.Fisc. Reg. Imprese: IT-02288800390 MAN0615G01 Rev.A01 Description Elettronica GF Srl Part No. Issue Date Issue Level Pages User Manual NFC/BLE (Gymkit) 5V RS232 board 0615G 20.02.2020 A01 Author(s):
David Sabbatani Approved David Sabbatani Signature:
David Sabbatani David Sabbatani Date:
20/02/2020 20/02/2020 Please contact Elettronica GF s.r.l. or its representative before designing your product based on this This technical literature is subject to change without notice. specification This document and informations herein is the property of Elettronica GF and all unauthorised use and reproduction is prohibited. All rights reserved. Confidential, Unpublished Property of Elettronica GF. pag. 1/9 MAN0615G01.A01 Elettronica GF s.r.l. Via Ca Bianca, 10 - 48018 - FAENZA (RA) ITALY Tel. (+39) 0546 622245 Fax (+39) 0546 622301 IVA Cod.Fisc. Reg. Imprese: IT-02288800390 TABLE OF CONTENTS MAN0615G01 REV.A01 .......................................................................................................................................... 1 1. NOTICE AND RESTRICTED USE INFORMATION ...................................................................................... 3 2. REGULATORY APPROVALS AND COMPLIANCE ..................................................................................... 4 2.1. 2.2 UNITED STATES FCC PART 15 .................................................................................................................. 4 CANADA IC RSS-210 ................................................................................................................................ 5 3. CONDITIONS OF USE ..................................................................................................................................... 6 4. SAFETY INSTRUCTIONS ............................................................................................................................... 6 5. NFC COMPATIBILITY ..................................................................................................................................... 6 6. BLE COMPATIBILITY ..................................................................................................................................... 6 7. MECHANICAL DIMENSION............................................................................................................................ 7 8. OPERATING MODE ......................................................................................................................................... 8 9. LABELLING ...................................................................................................................................................... 9 This document and informations herein is the property of Elettronica GF and all unauthorised use and reproduction is prohibited. All rights reserved. Confidential, Unpublished Property of Elettronica GF. pag. 2/9 MAN0615G01.A01 Elettronica GF s.r.l. Via Ca Bianca, 10 - 48018 - FAENZA (RA) ITALY Tel. (+39) 0546 622245 Fax (+39) 0546 622301 IVA Cod.Fisc. Reg. Imprese: IT-02288800390 1. Notice and Restricted use Information Information contained in this document is provided only for your (Costumer or you) convenience and may be superseded by updates. Its your responsibility to ensure that your application meets your specifications. Elettronica GF makes no representations or warranties of any kind whether express or implied, written or oral, statutory or otherwise, related to the information, including but not limited to its condition, quality, performance, merchantability or fitness for purpose. Elettronica GF disclaims all liability arising from this information and its use. Elettronica GF does not assume any responsibility for the use of the described modules. Elettronica GF makes no representation with respect to the adequacy of the module in low power wireless data communications applications or systems. Any Products using the module must be designed so that a loss of communications due to radio interference or otherwise will not endanger either people or property, and will not cause the loss of valuable data. Elettronica GF assumes no liability for the performance of products which are designed or created using the modules. The Modules are not designed, intended, or authorized for use components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any application in which the failure of the Module could create a situation where personal injury or death may occur. If you use the modules for such unintended and unauthorized applications, you do so at your own risk and you shall indemnify and hold Elettronica GF and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fee arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Elettronica GF was negligent regarding the design or manufacture of the Product. The information disclosed herein in exclusive property of Elettronica GF, and is not to be riproduced and/or distributed without the written consent of Elettronica GF. The recipient of this document by its retention and use agrees to respect the security status of the information contained herein. Elettronica GF believes the information contained herein is correct and accurate at the time of its release. However, the information contained in this document is subject to change without notice and should not be construed as a commitment by Elettronica GF unless such Commitment is expressly given in a covering document. This document and informations herein is the property of Elettronica GF and all unauthorised use and reproduction is prohibited. All rights reserved. Confidential, Unpublished Property of Elettronica GF. pag. 3/9 MAN0615G01.A01 Elettronica GF s.r.l. Via Ca Bianca, 10 - 48018 - FAENZA (RA) ITALY Tel. (+39) 0546 622245 Fax (+39) 0546 622301 IVA Cod.Fisc. Reg. Imprese: IT-02288800390 2. Regulatory Approvals and Compliance Modules NFC/BLE (Gymkit) 5V RS232 board have received regulatory approvals in the United States (FCC) and Canada (IC). Such approvals and qualification allows the user to place the module inside a finished product and, in most cases, not require regulatory testing for an intentional radiator, provided no changes or modifications are made to the module circuitry. This does not preclude the possibility that some other form of authorization or testing may be required for the finished product. Changes or modifications could void the users authority to operate the equipment. The end user must comply with all of the instructions provided by the Grantee, which indicate installation and/or operating conditions necessary for compliance. 2.1. United States FCC Part 15 This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manifacturers instruction manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for Class B digital device pursuant to Part 15 of the FCC Rules. 1- This device may not cause harmful interference 2- This device must accept any interference received, including interference that may cause undesired operation. NOTICE: The FCC regulations provide that changes or modifications not expressly approved by Elettronica GF s.r.l. could avoid your authority to operate this equipment. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:
Reorient the receiving antenna. Relocate the system with respect to the receiver Move the system away from the receiver Plug the system into a different outlet so that the system and the receiver are on different branch circuits. If necessary, consult a representative of Elettronica GF s.r.l. or an experienced radio/television technician for additional suggestions. The following information is provided on the device or devices covered in this document in compliance with the FCC regulations:
Product name: NFC/BLE (Gymkit) 5V RS232 board Model Number: 0615G Company name: Elettronica GF s.r.l. End product labelling:
Using a permanently affixed label, the modular transmitter is labelled with its own FCC identification number, and, If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device in to which the module is installed must also display referring to the enclosed module. This document and informations herein is the property of Elettronica GF and all unauthorised use and reproduction is prohibited. All rights reserved. Confidential, Unpublished Property of Elettronica GF. pag. 4/9 MAN0615G01.A01 Elettronica GF s.r.l. Via Ca Bianca, 10 - 48018 - FAENZA (RA) ITALY Tel. (+39) 0546 622245 Fax (+39) 0546 622301 IVA Cod.Fisc. Reg. Imprese: IT-02288800390 The final end product must be labelled in a visible area with the following:
Contains FCC ID: O6R3153, FCC ID: 2ARDN0615E 2.2 Canada IC RSS-210 This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:
1. This device may not cause interference 2. This device must accept any interference, including interference that may cause undesired operation of the device. NOTICE: The IC regulations provide that changes or modifications not expressly approved by Elettronica GF s.r.l. could avoid your authority to operate this equipment. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:
Reorient the receiving antenna. Relocate the system with respect to the receiver Move the system away from the receiver Plug the system into a different outlet so that the system and the receiver are on different branch circuits. If necessary, consult a representative of Elettronica GF s.r.l. or an experienced radio/television technician for additional suggestions. The following information is provided on the device or devices covered in this document in compliance with the FCC regulations:
Product name: NFC/BLE (Gymkit) 5V RS232 board Model Number: 0615G Company name: Elettronica GF s.r.l. End product labelling:
Using a permanently affixed label, the modular transmitter is labelled with its own IC identification number, and, If the IC identification number is not visible when the module is installed inside another device, then the outside of the device in to which the module is installed must also display referring to the enclosed module. Contains IC: 3797A-3153, IC: 24364-0615E This document and informations herein is the property of Elettronica GF and all unauthorised use and reproduction is prohibited. All rights reserved. Confidential, Unpublished Property of Elettronica GF. pag. 5/9 MAN0615G01.A01 Elettronica GF s.r.l. Via Ca Bianca, 10 - 48018 - FAENZA (RA) ITALY Tel. (+39) 0546 622245 Fax (+39) 0546 622301 IVA Cod.Fisc. Reg. Imprese: IT-02288800390 3. Conditions of Use The Modules NFC/BLE (Gymkit) 5V RS232 have been designed to support the ANT and/or Bluetooth low energy protocols by modules FCC ID 06R3153/ IC 3797A-3153 and are certified for use in many geographical region around the globe by the constructor DYNASTREAM INNOVATIONS INC. However, a product incorporating the Modules NFC/BLE (Gymkit) 5V RS232 may carry the certification IDs of the module only if it complies with the restrictions and terms, including use of Dynastream-approved software, provided in the conditions of use available at:
www.dynastream.com/components/d52/conditions-of-use 4. Safety Instructions The NFC/BLE (Gymkit) 5V RS232 board is a BLE + Mifare/NFC module of the Technogym S.p.a Devices
(Equipment Cardio, Trainer point or Class Reader). Read the Safety Instruction carefully and keep it for use later. Beware of all warning and instruction signs marked on the NFC/BLE (Gymkit) 5V RS232 board. Ensure that the ambient temperature around the module is between +5 C and +50C (with relative humidity between 5% and 85%). 5. NFC compatibility The NFC module will be compatible with all NFC Key/Tag properties of Technogym S.p.A. in these tested range of resonance frequency:
Key type TGS Band Min resonance frequency 14,2 MHz 14,2 MHz Max resonance frequency 15,0 MHz 16,2 MHz The NFC module will be compatible with all NFC tag / Key / Devices in accordance with:
MIFARE Classic 6. BLE compatibility The BLE module will be compatible with ANT and Bluetooth SoftDevices approved for use on the D52 Module series as referenced in 3.Conditions of Use are licensed separately from Dynastream Innovations and Nordic Semiconductor:
SoftDevice S212 S332 S132 Protocol(s) ANT ANT and Bluetooth low energy Bluetooth low Energy Licensor Dynastream Innovations Dynastream Innovations Nordic Semiconductor This document and informations herein is the property of Elettronica GF and all unauthorised use and reproduction is prohibited. All rights reserved. Confidential, Unpublished Property of Elettronica GF. pag. 6/9 MAN0615G01.A01 Elettronica GF s.r.l. Via Ca Bianca, 10 - 48018 - FAENZA (RA) ITALY Tel. (+39) 0546 622245 Fax (+39) 0546 622301 IVA Cod.Fisc. Reg. Imprese: IT-02288800390 7. Mechanical Dimension The NFC/BLE (Gymkit) 5V RS232 board shows the following mechanical dimension:
The electronic board has all components on one side only and the connectors are all SMT type. BOTTOM SIDE TOP SIDE This document and informations herein is the property of Elettronica GF and all unauthorised use and reproduction is prohibited. All rights reserved. Confidential, Unpublished Property of Elettronica GF. pag. 7/9 MAN0615G01.A01 Elettronica GF s.r.l. Via Ca Bianca, 10 - 48018 - FAENZA (RA) ITALY Tel. (+39) 0546 622245 Fax (+39) 0546 622301 IVA Cod.Fisc. Reg. Imprese: IT-02288800390 8. Operating Mode The NFC/BLE (Gymkit) 5V RS232 board operate with both user keys based on Mifare protocol (TGS Mifare and Band Key) and NFC smartphones. The minimum reading distance with NFC devices must be at least 15 mm. In case of interaction with user key or smartphone NFC, the user data are not collected or stored by the reader. The reader make a bridge by protocol from user key or smartphone NFC to application connected to reader. If a BLE connection is established with external device, the reader receive data and transmit by RS232 to application connected to reader: the user data are not collected or stored by the reader. The NFC/BLE (Gymkit) 5V RS232 board operates with the following transmitter specifications:
Work Frequency: 13,56 MHz Frequency Range: 13,553-13,567 MHz Electric Field @ 30m: < 0.5 mV/m This document and informations herein is the property of Elettronica GF and all unauthorised use and reproduction is prohibited. All rights reserved. Confidential, Unpublished Property of Elettronica GF. pag. 8/9 MAN0615G01.A01 Elettronica GF s.r.l. Via Ca Bianca, 10 - 48018 - FAENZA (RA) ITALY Tel. (+39) 0546 622245 Fax (+39) 0546 622301 IVA Cod.Fisc. Reg. Imprese: IT-02288800390 9. Labelling The NFC/BLE (Gymkit) 5V RS232 board has labeling showing FCC ID code / IC code and Elettronica GF code. This document and informations herein is the property of Elettronica GF and all unauthorised use and reproduction is prohibited. All rights reserved. Confidential, Unpublished Property of Elettronica GF. pag. 9/9 MAN0615G01.A01