PRECAUTIONS If you do not plan to use the diffuser for an extended period, it is advisable to remove the bottle containing the essential oil and store the remaining oil. Ensure the spray head is thoroughly cleaned. Keep the diffuser in a dry environment. If there are no essental oils in the device, the device will not shut down automatically, requiring it to be turned off manually. Please note of spray intensity and be aware that slight variations are normal. The fog effect may be influenced by different factors such as the type of essential oils used, humidity levels, temperature, and indoor airflow. Prior to switching to a different essential oil, please ensure that the product is properly cleaned. DISCLAIMER In order to avoid damaging the product, please follow the necessary guidelines listed below:
Do not allow non-approved staff to transform, disassemble, or repair the product. If the product needs to be repaired, please contact our sales department. Do not puncture, stab, twist, or stretch the line of the power adaptor. Do not place the electrical wire inear or in a high-temperature location. Do not put heavy items or put pressure on the wire. Clipping or repair of the wire are also not be allowed. If the adaptor wire is damaged or the socket is loose, please stop using. If there is an abnormal odor, noise, abnormal generation, then the product or the adaptor may be at fault. Please pull the adaptor out of the supply socket, and stop using at the same time. Do not place the adaptor into water or any liquid material. Do not set the adaptor in or near a wet location, such as a bathroom, kitchen, sauna, etc. To maintain proper function, remove the essential oil bottles and use a cloth to wipe them clean, after every use. Scent oils may cause staining. If there is an accidental spill-out, use a dish cloth to wipe it immediately. Do not let the spray nozzle spray directly onto furniture, clothes, or walls. Avoid indirect sunlight. Do not place near an air conditioner, fan, or high temperature location. Place on a flat surface. Do not place on a soft surface, like a rug or pillow. Do not place on any appliances such as a microwave, television, or audio equipment. FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance 20cm between the radiator and your body: Use only the supplied antenna. IC Caution:
RSS-Gen Issue 5 & RSS-Gen numro 5 English:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. French:
Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:
Do not cover the mist outlet. Impeding, blocking or covering the mist outlet will result in oil
(1) Cet appareil ne doit pas causer d'interfrences. restriction and damage. After extended use, product should be turned off for a few hours. Do not touch the product while your hands are wet. May cause electric shock. Place out of reach from children. PLEASE NOTE: It is recommended to read the user manual in order to safely operate this product.
(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. Tout changement ou modification non expressment approuv par la partie responsable de la conformit pourrait annuler l'autorit de l'utilisateur utiliser l'quipement. Dclaration d'exposition RF:
L'quipement est conforme la limite d'exposition aux radiations de la IC tablie pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20cm entre le radiateur et votre corps. Adaptor User Manual Product Specification Product size:
73x69x15mm Input voltage:
Product weight:
5V 50g Raw materials:
ABS Accessories:
Type C cable, HDMI cable, earphone cable, user manual This product cannot be discarded as domestic waste and should be recycled according to the garbage classification. Proper disposal and recycling help protect natural resources, human health and the environment. Made in China MODEL NO. ADPT001 and ADPT001W Read Instruction manual carefully before use Connecting the adapter to the atomizer Indicator Lights 1. Hold and press the power on button for 2 seconds, until the red light starts to blink. 2. Open the GameScent app and click on START SCANNING. 3. Select the device name with the prefix Adapter_ from the app. (If the connection is successful, the right light will stop blinking and stay on) 4. Select the WiFi network and enter the WiFi password. PRODUCT DIAGRAM OPERATION 1 4 E A B C D Plug USB-A into power supply USB-A 2 USB-C J USB-A USB-C F G H Plug USB-C into adaptor I A. Switch B. DC C. Audio In D. HDMI In E. Indicator lights I. Power supply F. HDMI out G. Audio out H. WiFi on/off J. USB-A to USB-C USB-C USB-A 5. When the green light goes on, the adapter is connected to the WiFi network.
(At present, the adapter has completed the distribution network process. Complete the distribution network of the atomizer as soon as possible.) 6. Plug the atomizer into a power outlet. 7. Hold and press the power on button for 2 seconds, until the LED light starts to blink. 8. Click START SCANNING in the app. 9. Select the device name with the prefix Atomimzer_ from the app. 10. Select the WiFi network and enter the WiFi password. Deconncting the adapter to the atomizer First, make sure that the adapter and the atomizer are powered on and online. 1. In the app, click information. Configure Device to check the devices 2. Click UNBIND DEVICE 3. Select the device name with the prefix Adapter_ from the app. (If the connection is successful, the right light will stop blinking and stay on) Clearing the WiFi information 1. Plug a 5V power supply into the adapter. 2. Hold and press the power on button for 2 seconds. 3. Press the power on button 3 times in 5 seconds. 4. For adapter: WiFi light (green) will not light up, (red) will blink. For atomizer: LED will blink. The operation steps of the adpater and atomizer are the same. WiFi GREEN LED on RED LED on Both GREEN & RED LED on Both GREEN & RED LED off