Usermanual 1 Functionalschematicdiagram 2.Instructions 1)changecolormanually . PressthebuttonMODELtoturnon,akindofcolorlight,pressthisbuttonordinaltocontrol theAmbientlightforchangingcolors(changesevencolormost).Pressthebuttoneighthtime toturnoff(otherbuttonsto lose effectiveness). 2)changecolor automatically . Press the button MODEL to turn on, hold on two seconds, Enter the automatic mode. Now the Ambientlightwillchangecolorautomatically every five seconds. Press the button UP to speed up the speed of changing color, when press the button fifth, the Ambient light will changecolorautomatically every seconds. Press the button DOWN decelerate the speed of changing color, when press the button fifth, the Ambient light will change color automatically every seconds. 3)Press the button MODEL again, turn back to the a kind of color mode, now change color manuallyandpressthebuttonUPtoturnonsoundcontrol,thenthe Ambientlightwillflash andchangecolorautomatically according to the music. Press the button MODEL again, it will flash in a kind of color. When it is flashing, press the button MODEL continuously to enter changecolormanually mode. User manual 2 Functionalschematicdiagram 2.Instructions 1) Press the button OPEN on the remote, the TV Mount will extend and stop. 2) Press the button LEFT,RIGHT,DOWN to adjust the angle that you want. 3) Hold the button MEMORY long time and adjust the angle you want, then press the button MEMORY again, the red light turn off and this angle is saved. Press the button OPEN again,the TV Mount will turn back to midpoint automatically, then contraction, return and turn off; if you want to turn on again, press the button MEMORY only, then the TV Mount will restore the angle that you saved before turn off. FCC ID: VII-SMMAL-T-1 IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules:
Operation is subject to the following two conditions:
1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipments.