BATTERY STATUS INDICATOR LEDs indicate battery and charging status as following table. Battery Mode Adapter Mode Geen(100%) Green (80% ~) Orange(15%~79%) Red(~14%) In battery mode, MosicGOTM will be forced to power off if battery capacity is under 10%. Suggest charging the battery immediately. Solid Flash Flash Flash Solid Solid Solid Solid
*Note:
There is no battery in Lite MGFU-L verion. Power LED is green solid when DC adapter is inserted.) BATTERY FOR POWER SOURCE USB Type C power Delivery:
Type C support PD function. Please refer specification section for details.
*Note:
When projecting video content, USB type C ports automatically switch to a lower (5V1A) power rail. USB Type A :
Provide 5V/1A max power. Electronic file link www.eliteprojector.com/MGFU/manual 7 FBZZ-MG1Z002-01 www.eliteprojector.com P r i n t e d i n T a i w a n CONNECT INPUT SOURCE HDMI BY HDMI SPLITTER (6-A) SOURCES TO USB PORT MosicGOTM INPUT DC5V POWER OUTPOT 1 OUTPOT 2 Page5 6-A HDMI SPLITTER MosicGOTM TO HDMI
*Note:
Please always use the splitter to connect to any source (Laptop, PC, DVD) and the projector. Electronic file link www.eliteprojector.com/MGFU/manual 8 FBZZ-MG1Z002-01 www.eliteprojector.com P r i n t e d i n T a i w a n CONNECT INPUT SOURCE :
USB Type C Display Port ADJUST PROJECTION IMAGE TILT The projector is equipped with four elevator feet for adjusting the projected image tilt. To adjust the tilt:
Turn the elevator feet to adjust the projected image position to the desired tilt. Adjust the focus until the image is clear. Electronic file link www.eliteprojector.com/MGFU/manual 9 FBZZ-MG1Z002-01 www.eliteprojector.com P r i n t e d i n T a i w a n ADJUST THE PROJECTION IMAGE SIZE A B C D E Projector Front Edge Distance to Screen lower edge Screen to projector table Projector Screen Projector Screen Projector Screen diagonal width height Note inch 3.82 6.42 9.17 11.97 14.53 inch 9.41 10.75 11.89 13.35 14.37 A B Projector Front Edge Distance to Screen lower edge Screen to projector table cm 9.7 16.3 23.3 30.4 36.9 cm 23.9 27.3 30.2 33.9 36.5 inch 60 70 80 90 100 C inch 52.3 61.0 69.7 78.4 87.2 D inch 29.4 34.3 39.2 44.1 49.0 E
*Note Projector Screen Projector Screen Projector Screen diagonal width height Note cm 152 178 203 229 254 cm 133 155 177 199 221 cm 75 87 100 125 112
*Note:
The MosicGOTM (Lite MGFU-L & Sport MGFU-S) portable UST (ultra-short throw) projectors are specifically designed for creating 60-80 imagery in a 16:9 aspect ratio. Throwing larger (90-100) images will have corner distortion and is more recommended for videos than in still shot / training presentations. D C E A
*Note:
The tolerance is around 5% . screen B table A
*Note D C E Electronic file link www.eliteprojector.com/MGFU/manual 10 FBZZ-MG1Z002-01 www.eliteprojector.com P r i n t e d i n T a i w a n EARPHONE 12V TRIGGER GND HPR HPL GND 12V Earphone, 3.5mm Jack Pin assignment HPL : Left Channel Audio Signal HPR : Right Channel Audio Signal GND : Signal Ground To Earphone Plug 12V Trigger Port, 3.5mm Jack Pin assignment 12V : 12V trigger signal for screen rolling up/down GND : Signal Ground To 12V Trigger Plug Warning : Dont plug in earphone to 12V trigger port, that can cause damage to the earphone. Electronic file link www.eliteprojector.com/MGFU/manual 11 FBZZ-MG1Z002-01 www.eliteprojector.com P r i n t e d i n T a i w a n CO MOUNT THE PROJECTOR Mount on tripod Mount on ceiling M4 Screw
( x 4 ) Screw hole for tripod
*Standard Tripod Screw a standard tripod into the screw hole on the projector. 1. Loosen 4 screws 2. Fasten screws metal plate from MosicGOTM . to ceiling mount kits. On table Note1 Keep enough space from speakers and ventilations (30 cm above) Note2 4 rubber feet are placed on flat surface. Prevent to block bottoms ventilations. table table
*Note:
Please keep air vents opend for heat ventilation. Otherwise, projector will be turned off if it's over heat. Electronic file link www.eliteprojector.com/MGFU/manual 12 FBZZ-MG1Z002-01 www.eliteprojector.com P r i n t e d i n T a i w a n
*Note:Tripod should support loading above 3Kg, and mounting screw spec is 1/4 OSD MosicGOTM RGB PICTURE Contrast Sharpness Pattern Test MENU OK MosicGOTM RGB Contrast: adjust color contrast. Sharpness: adjust picture sharpness. Pattern Test: present pattern picture to verify focus and color situation of display. Press OK will return to current video port.
*Note:
1.Reset to default setting by selecting 'Menu'->'Other'->'Reset'
DISPLAY Auto PowerOff Off H Position V Position Auto PowerOff: Configure the time before power off if there is no signal to projector. H / V Position: Adjust the display position.
*Note:
1.Reset to default setting by selecting 'Menu'->'Other'->'Reset'
MENU OK Electronic file link www.eliteprojector.com/MGFU/manual 13 FBZZ-MG1Z002-01 www.eliteprojector.com P r i n t e d i n T a i w a n OSD MosicGOTM RGB COLOR Off Off Standard RGB Gamma Color Temp Color Effect Color Format HUE Saturation MENU OK MosicGOTM RGB ADVANCE Aspect Ratio Orientation Ultra Viivid Full FrontTable Off MENU OK Configure color properties.
*Note:
1.Some features might not be support in current model. 2.Reset to default setting by selecting 'Menu'->'Other'->'Reset'
Set other configuration. Aspect Ratio: configure ratio of display area. Orientation: according to your projector installation, configure the orientation of display. Ultra vivid: enable/disable supporting vivid color.
*Note:
1.Some features might not be support in current model. 2.Reset to default setting by selecting 'Menu'->'Other'->'Reset'
Electronic file link www.eliteprojector.com/MGFU/manual 14 FBZZ-MG1Z002-01 www.eliteprojector.com P r i n t e d i n T a i w a n OSD MosicGOTM RGB OTHER 12V Trigger Keystone Transparency S.P.M(SPORT) Buzzer Reset Off On Off On No MENU OK MosicGOTM RGB 12V Trigger: Enable/disable the output of 12VTrigger Out. Keystone: adjust the rectangle shape of display. Transparency: configure the transparency of OSD(on-screen display). S.P.M: enable/disable Smart Projector Mode. If enable, MosicGOTM will automatically adjust brightness according current battery and power situation. Rest: reset to default setting.
*Note:
1.Brightness cyclic MAX/ECO/MIN will be disabled when S.P.M is ON. 2.If Keystone is enabled , the projector will automatically adjust the image display within 2-3 seconds. Press up/down key to adjust slightly also. 3.Reset to default setting by selecting 'Menu'->'Other'->'Reset'
INFORMATION Present current video signal information. HDMI 1080p H: 67.5K Hz V: 60.0Hz PCLK: 148.4MHz HDCP Disabled 20190729 V59 Press menu key to turn on/off menu MENU OK Electronic file link www.eliteprojector.com/MGFU/manual 15 FBZZ-MG1Z002-01 www.eliteprojector.com P r i n t e d i n T a i w a n SPECIFICATIONS TROUBLESHOOTING Item Imager Native Resolution Projection Distance Projection Size Focus Throw Ratio Description If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local retailer or service center. x 1080 No image appears on screen
-0. m (1' " - 2'2") (from screen to lens) Ensure the cable is fine. DLP 1 0.
" - 100") 1.52-2.54 m (
Manual 0.
(80"@0.5m) Keystone Vertical keystone Ceiling Projection Modes Front Table, Rear Table, Front Ceiling, Rear Standard Input SDTV/EDTV/
(1920 x 1080) 480i, 480p, 576i, 576p, 720p, 1080p Up to HDTV Horizontal Frequency Vertical Frequency Operating Temperature Dimensions
(WxHxD) AC adapter Power Input Power Consumption Lamp Lamp Life Speakers 30.5 - 91.1kHz 50 - 85Hz 0 - 40C
(back) / 127(front) mm 100 - 240V, 50 - 60Hz 19V DC, 6.3A Less than 120W RGB LED 20,000 Hours 8W x 2 music power Battery Capacity 37200mAH (135 Watt-Hours)
(only for MGFU-S model) Alt-DP (USB type C connector) x 1 HDMI 1.4 x 2 USB type A poewr charging port (5V1A) x 2 USB type C PD power source port x 2 (Note) Earphone out 12V Trigger Out (0.1A output max.) Bluetooth audio in x1 IPX2 Kensington Slot Input/Output Ports Waterproof Security
*Note:
Power Delivery (PD): maximum 5V/3A,9V/3A,15V/3A,20V/4.35A for port USB type-C port 8 maximum 5V/3A,9V/3A,15V/2A,20V/1.5A for port USB type-C port 3 Be aware that the projector does NOT support HDCP
(High-Bandwidth Digital Content Protection). Image is out of focus Make sure the projection distance is in valid range (refer to page 10). Projecting test pattern (Menu -> Picture ,press OK-> Pattern Test
,press OK) Adjust the focus ring, make the line pattern on four corners and center clear.Exit Patternby press OKagain. Image is too small or too large No sound s on the remote control .
*Note:
When the projectors temperature is too high, the projector automatically shuts down due to the built-in temperature protection. This is not a malfunction. Let the projector cool down before switching it on again.
*Note:
MGFU-S/MGFU-L is splash resistant and was tested under controlled laboratory conditions with a rating of IPX2 under IEC standard 60529. Splash resistance are not permanent conditions and resistance might decrease as a result of normal wear. Do not attempt to charge a wet MGFU-S/MGFU-L; Liquid damage not covered under warranty. Supported HDMI input video signal:
Resolution 640 x 350 720 x 400 640 x 480 800 x 600 1024 x 768 1152 x 864 1360 x 768 1280 x 1024 1920 x 1080 Horizontal Frequency (kHz) Vertical Frequency (Hz) 31.468 31.469 31.469 37.879 48.363 54.348 47.712 63.981 67.5 70.09 70.08 59.94 60.31 60.00 60.053 60.015 60.020 60
* If an invalid signal is input into the projector, it will not be displayed properly on the screen or a message such as 'not support' will be displayed.
* To provide the best picture quality, 1920 x 1080 (1080p) resolution is recommended. Electronic file link www.eliteprojector.com/MGFU/manual 16 FBZZ-MG1Z002-01 www.eliteprojector.com P r i n t e d i n T a i w a n TROUBLESHOOTING 3 continuous beep sound You may hear 3 continuous beep sound accompany following icon on the screen Low battery: projector is turned off immediately. Please plug power adapter to charge the battery. You can turn on the projector during charging. Battery fail: if the power adapter is plugged. You can turn on and use projector. If you pull out the power adapter, the projector may be turned off without any warning. If the problem still occurs, please check your vendor. Over heat: projector is turned off immediately. Suggest to let projector be off for a while before it is turned on again. Fan error: projector is turned off immediately. If the problem still occurs, please check your vendor.
*Note:
Projector may be over heat and turned off immediately. Suggest to let projector be off for a while before it is turned on again. Electronic file link www.eliteprojector.com/MGFU/manual 17 FBZZ-MG1Z002-01 www.eliteprojector.com P r i n t e d i n T a i w a n 13 Months Warranty Card Customers name:
Phone number:
Email:
Address:
Date of purchase: (M) (D) (Y) Model No:
S/N:
To ensure your right, please ask the Dealer to fill in the information above, and have Dealers stamp on this card. Dealers Stamp:
If date of purchase cannot be provided with dealers stamp, the manufacture date as recorded will be deemed to be the start of the Warranty Period. TM MosicGO MOVIES MUSIC POWER GO Elite Screens Visual & Sound Co., Ltd. Electronic file link www.eliteprojector.com/MGFU/manual 18 FBZZ-MG1Z002-01 www.eliteprojector.com P r i n t e d i n T a i w a n TM MOVIES MUSIC POWER GO Electronic file link www.eliteprojector.com/MGFU/manual FBZZ-MG1Z002-01 www.eliteprojector.com P ri n t e d i n T a iw a n