FCC ID: 2AEKR-TE70SA3 Tablet PC

by: ELITEGROUP COMPUTER SYSTEMS CO., LTD latest update: 2015-10-20 model: TE70SA3

Three grants have been issued under this FCC ID on 10/20/2015 (this is one of seven releases in 2015 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked instructions, drivers, warrantee terms, password defaults, & troubleshooting guides.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 14
1 ~ 2015-10-20 13
2 ~ 2015-10-20 9
3 ~ 2015-10-20 12

app s				submitted / available
1 2 3	Users Manual	Users Manual	pdf	1.16 MiB
1 2 3		Cover Letter(s)	pdf
1 2 3		Cover Letter(s)	pdf
1 2 3		Cover Letter(s)	pdf
1 2 3		External Photos	pdf
1 2 3		ID Label/Location Info	pdf
1 2 3		Internal Photos	pdf
1 2 3		RF Exposure Info	pdf
1 2 3		Test Report	pdf
1 2 3		Test Report	pdf
1 2 3		Test Setup Photos	pdf
1 2 3		Test Setup Photos	pdf
1 2 3		Cover Letter(s)	pdf
1 2 3		Test Report	pdf

exhibit
download
text

1 2 3

Users Manual

Users Manual

pdf

1.16 MiB

Quick Start Guide For Android Tablet TE70SA3 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. 1 RF Exposure Information (SAR) This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels. The highest SAR value for the device as reported to the FCC is 1.39 W/kg when placed next to the body. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Attention: Teachers, Parents and Adult Supervisors This product is an educational tool designed for school children, ages 6 and up. There must be supervision by an adult on school children under 10 when using this tablet. It is a must to have a thorough explanation to students on safe and proper handling of the tablet, power supply, battery pack, and power cord. 2 Be sure to keep the power cord away from younger children Please ensure that students understand the following:

As with all electrical products, precautions should be observed during handling and use to prevent electric shock. The power supply (adapter) should not be handled by the children. Emphasize to students that this device is an educational tool and not a toy. The tablet, power supply, battery pack or power cord should not be dropped, crushed, stepped on or otherwise abused. Ensure students understand the safe and proper handling of power cord and power supply. Misuse could result in serious injury. The teacher, parent or adult supervisor should periodically inspect the tablet; power supply and power cord for damage and replace it, if necessary. teacher, parents or adult supervisor, immediately. Students should report any damage or loose parts to their Do not leave the tablet plugged in or on when enclosed in a non-vented container, such as a school backpack, as overheating may occur. It is recommended that students should take a 5-minute break every 30 minutes of use. 3 Safety Precautions The following are lists of precautionary measure the students must understand before using this tablet inside the classroom or home environment:

1. Do not place near the fire or other sources of heat. 2. Do not expose to magnetic fields. 3. Do not expose to direct sunlight. 4. Do not expose to rain or moisture. 5. Do not place heavy objects to add heavy pressure on the tablet. 6. Do not drop the tablet. 4 Package contents Carefully unpack your box and take out the items listed below. If any of the items are missing or damaged, please contact your dealer immediately:

One tablet One AC adapter One USB cable This guide 5 Tablet layout No. Name No. Name 1 2 3 Power lock button Volume up/down Front facing camera 4 5 Touchscreen Microphone 6 No. Name No. Name 1 2 3 Volume up/down Power lock button Rear facing camera 4 5 4 Speaker Headphone jack Micro USB 2.0/DC-in 7 Charging your tablet If your tablet is just being unpacked from the box, you need to charge the tablet first. It will take around 4 to 5 hours to be fully charged. 1. Place your tablet with the screen facing up, and the provided USB cable. 2. Plug the USB head of the cable into the adapter, and the micro-USB head of the cable into the micro-USB port on your tablet. 3. Plug the adapter into a wall-socket. 8 Powering ON/OFF your tablet To power on your tablet Press and hold the power button down until the screen turn on. To power off your tablet To turn off your tablet, follow these steps:

1. Press and hold the Power Lock button. 2. Touch Power off from the menu as shown below.. 3. Touch OK to power down your tablet. 9 Specifications Processor Memory Storage Wireless LCD Touchscreen Camera Battery Input/Output Speaker &

Mic Intel AtomTM DC 1.x GHz, 64bit DDR3- 1600 1 GB eMMC v4.4.1 8 GB Wi-Fi 802.11 b/g/n, Bluetooth 4.0 7-inch TN LCD Resolution: 600 x1024 pixels 5-point multi-touch and Capacitive multi-touch support Front: 0.3M Rear: 2.0M (Flash LED optional) 1 Cell Li-polymer 2800 mAh 1 x micro-USB 2.0 OTG port

(type B) 1 x mic/head phone jack combo Build-in Speaker x 1 Internal analog MIC x 1 10 DC Output: 5V/2A/10 Watt Input Voltage: 100 240VAC Input Frequency: 47 63Hz 188.2 x 108 x 10.4 0.4 kg USB-Charger Dimension

(mm) Weight 11

		frequency	equipment class	purpose
1	2015-10-20	2412 ~ 2462	DTS - Digital Transmission System	Original Equipment
2		2402 ~ 2480	DSS - Part 15 Spread Spectrum Transmitter
3		1852.4 ~ 1907.6	PCB - PCS Licensed Transmitter

Application Forms

app s	Applicant Information
1 2 3	Effective	2015-10-20
1 2 3	Applicant's complete, legal business name	ELITEGROUP COMPUTER SYSTEMS CO., LTD
1 2 3	FCC Registration Number (FRN)	0018032326
1 2 3	Physical Address	No.239, Sec.2, Ti Ding Blvd.
1 2 3		N/A
1 2 3		Taipei, N/A 94954
1 2 3		Taiwan

app s	TCB Information
1 2 3	TCB Application Email Address	c******@telefication.com
1 2 3	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
1 2 3	TCB Scope	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27

app s	FCC ID
1 2 3	Grantee Code	2AEKR
1 2 3	Equipment Product Code	TE70SA3

app s	Person at the applicant's address to receive grant or for contact
1 2 3	Name	P****** Y******
1 2 3	Title	Senior Manager
1 2 3	Telephone Number	886-2******** Extension:
1 2 3	Fax Number	886-2********
1 2 3	E-mail	P******@ecs.com.tw

app s	Technical Contact
1 2 3	Firm Name	Cerpass Technology Corporation
1 2 3	Name	M** C****
1 2 3	Physical Address	No.66,Tangzhuang Road Suzhou
1 2 3	Physical Address	China
1 2 3	Telephone Number	86-51******** Extension:
1 2 3	Fax Number	86-51********
1 2 3	E-mail	m******@cerpass.net

app s	Non Technical Contact
1 2 3	Firm Name	Cerpass Technology Corporation
1 2 3	Name	M** C**
1 2 3	Physical Address	No.66,Tangzhuang Road Suzhou
1 2 3	Physical Address	China
1 2 3	Telephone Number	86-51******** Extension:
1 2 3	Telephone Number	86-51******** Extension:
1 2 3	Fax Number	86-51********
1 2 3	E-mail	m******@cerpass.net

app s	Confidentiality (long or short term)
1 2 3	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2 3	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2 3	If so, specify the short-term confidentiality release date (MM/DD/YYYY format)	04/17/2016
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2 3	Is this application for software defined/cognitive radio authorization?	No
1 2 3	Equipment Class	DTS - Digital Transmission System
1 2 3		DSS - Part 15 Spread Spectrum Transmitter
1 2 3		PCB - PCS Licensed Transmitter
1 2 3	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	Tablet PC
1 2 3	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2 3	Modular Equipment Type	Does not apply
1 2 3	Purpose / Application is for	Original Equipment
1 2 3	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2 3	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2 3	Grant Comments	Power Output is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for head, product specific, and simultaneous transmission conditions are < 0.1 W/kg, < 0.1W/kg, and 1.19 W/kg, respectively. This device has 20/40 bandwidth modes.
1 2 3		End-users must be informed of transmitter operating conditions for satisfying RF exposure compliance.
1 2 3		Power Output is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for head, product specific, and simultaneous transmission conditions are < 0.1 W/kg, 1.16W/kg, and 1.19 W/kg, respectively. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.
1 2 3	Is there an equipment authorization waiver associated with this application?	No
1 2 3	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2 3	Firm Name	Cerpass Technology (SuZhou) Co., Ltd.
1 2 3	Name	M****** C******
1 2 3	Telephone Number	86-05******** Extension:
1 2 3	Fax Number	86-05********
1 2 3	E-mail	m******@cerpass.net

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C	CC	2412	2462	0.0108
1	2	15C	CC	2402	2480	0.0006
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15C	CC	2402.00000000	2480.00000000	0.0007000
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
3	1	22H		824.2	848.8	1.581	65 Hz	245KGXW
3	2	24E		1850.2	1909.8	0.914	62 Hz	247KGXW
3	3	22H		824.2	848.8	1.178	62 Hz	245KG7W
3	4	24E		1850.2	1909.8	0.596	74 Hz	239KG7W
3	5	22H		826.4	846.6	0.178	50 Hz	4M18F9W
3	6	24E		1852.4	1907.6	0.195	77 Hz	4M23F9W

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: OWDTR-0171-E HARRIS CORPORATION 2ANSF-HH SHENZHEN BESUNVO TECHNOLOGY CO. LTD 2AC23-WT8S Hui Zhou Gaoshengda Technology Co.,LTD 2BFGZLCM-01 LILLYCOVER CO., LTD. O4GH3A Dayton Industrial Co., Ltd.