| all | frequencies |
|
|
exhibits | applications |
|---|---|---|---|---|---|
| manuals | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
Users Manual Part 1 Revision 2 | Users Manual | 2.22 MiB | July 09 2004 | |||
| 1 |
|
Users Manual Part 2 Revision 2 | Users Manual | 1.57 MiB | July 09 2004 | |||
| 1 | Cover Letter(s) | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | External Photos | |||||||
| 1 | Internal Photos | |||||||
| 1 | Internal Photos | |||||||
| 1 | ID Label/Location Info | |||||||
| 1 | RF Exposure Info | |||||||
| 1 | RF Exposure Info | |||||||
| 1 | Cover Letter(s) | July 09 2004 | ||||||
| 1 | Cover Letter(s) | July 09 2004 | ||||||
| 1 | ID Label/Location Info | |||||||
| 1 | Test Setup Photos | |||||||
| 1 | Test Report | July 09 2004 |
| 1 | Users Manual Part 1 Revision 2 | Users Manual | 2.22 MiB | July 09 2004 |
PPrreeffaaccee Copyright 2004 All Rights Reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. TTrraaddeemmaarrkkss CardSoft is a trademark of SystemSoft Corporation. AutoCAD and Autoshade are trademarks of Autodesk, Inc. IBM, OS/2, and VGA are trademarks of International Business Machines Corp. Lotus, 1-2-3, and Symphony are trademarks of Lotus Development Corp. Windows, Word, MS-DOS, and Microsoft are trademarks of Microsoft Corp. VESA is a trademark of Video Electronics Standards Association. Other product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies. LLiimmiittaattiioonn ooff LLiiaabbiilliittyy While reasonable efforts have been made to ensure the accuracy of this manual, the manufacturer and distributor assume no liability resulting from errors or omissions in this manual, or from the use of the information contained herein. NNoottiicceess FFeeddeerraall CCoommmmuunniiccaattiioonnss CCoommmmiissssiioonn RRaaddiioo FFrreeqquueennccyy IInntteerrffeerreennccee SSttaatteemmeenntt This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio TV technician for help. NNoottiiccee::
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Shielded interface cables and a non-shielded AC power cord must be used in order to comply with emission limits. This equipment is to be used with power supply:
I/P: 100-240 Vac, 50-60Hz, 1.8A O/P: 19Vdc, 3.42A 2 There is no internal power supply. WWaarrnniinngg::
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Notebook is incompliance with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. RRFF EExxppoossuurree IInnffoorrmmaattiioonn This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels. The highest SAR value for the device as reported to the FCC is 0.289 W/kg when placed next to the body. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID:
SA6G553IBXX. 3 CCaannaaddiiaann DDOOCC NNoottiiccee FFoorr CCllaassss BB CCoommppuuttiinngg DDeevviicceess This Class B digital apparatus meets all requirements of the Canadian Interference -
Causing Equipment Regulations. Cet appareil numerique de la classe B repecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. 4 Page intentionally left blank 5 TTaabbllee ooff CCoonntteennttss Chapter 1:
Before you Start ------------------------------------------------------------------------------------------------8 Conventions of This Manual..................................................................................................................... 8 Things you must remember before working on your computer................................................................ 15 Introduction------------------------------------------------------------------------------------------------------19 Welcome to the Notebook PC................................................................................................................... 20 Getting to Know Your Computer.............................................................................................................. 20 Getting Started--------------------------------------------------------------------------------------------------33 Connecting to a Power Source.................................................................................................................. 33 Turning On Your Notebook Computer..................................................................................................... 35 Operating on Battery Power...................................................................................................................... 35 Using the Notebook Computer ----------------------------------------------------------------------------39 Adjusting the LCD Screen Display........................................................................................................... 39 A Tour of the Notebooks Keyboard ........................................................................................................ 41 The TouchPad........................................................................................................................................... 42 Connecting an External Tracking Devices................................................................................................ 44 The CD-ROM/DVD-ROM/Combo Drive ................................................................................................ 44 PCMCIA Cards and Expansion Sockets................................................................................................... 46 Power Saving Modes ................................................................................................................................ 48 Desktop Operation---------------------------------------------------------------------------------------------53 Audio ........................................................................................................................................................ 54 Connecting Peripheral Devices................................................................................................................. 55 Running BIOS Setup ------------------------------------------------------------------------------------------59 Introduction............................................................................................................................................... 59 Navigating through BIOS Setup ............................................................................................................... 60 6 Accessing the BIOS Setup Program ......................................................................................................... 60 The Menu Bar ........................................................................................................................................... 60 The Legend Bar ........................................................................................................................................ 61 Launching Submenus................................................................................................................................ 62 General Help............................................................................................................................................. 62 The Main Menu ........................................................................................................................................ 63 The Advanced Menu................................................................................................................................. 64 The Security Menu.................................................................................................................................... 65 The Boot Menu ......................................................................................................................................... 66 The Exit Menu .......................................................................................................................................... 67 The Software Utilities Disks --------------------------------------------------------------------------------69 AutoRun Installation................................................................................................................................. 69 VGA Utilities............................................................................................................................................ 73 Troubleshooting------------------------------------------------------------------------------------------------84 Locating a Problem................................................................................................................................... 84 Checking Cables and Connections............................................................................................................ 85 The Power-On Self Test............................................................................................................................ 86 General Hardware Problems ..................................................................................................................... 87 Contacting Your Dealer ............................................................................................................................ 89 Upgrading your System--------------------------------------------------------------------------------------92 Upgrading your Memory .......................................................................................................................... 92 The Easy to Upgrade HDD Module.......................................................................................................... 94 Upgrading your System CPU.................................................................................................................... 95 Specification------------------------------------------------------------------------------------------------- 98 Detailed Notebook Specifications............................................................................................................. 98 7 Conventions of This Manual BBeeffoorree yyoouu SSttaarrtt Use this manual will help you get the most from your notebook computer. If you are an experienced user of computers and/or Microsofts Windows operating systems, you might find it useful to read the Quick Start Guide that comes along with your accessories. If you are a less experienced user, you should through the manual carefully before using your system. 8 Whether or not you are an experienced user, you should consult on the Troubleshooting Chapter if you encounter any problems with your notebook. The check mark symbol indicates that you should take note on every detailed information when you encounter some function that might be useful when you are using your notebook. The pencil symbol identifies information which is important for you to read to avoid damage to the computer. This warning cautions you against actions which might be destructive to your data or might disrupt proper system operation. SSaaffeettyy PPrreeccaauuttiioonnss This section is designed to assist you in identifying potentially unsafe conditions while working with this product. Required safety features have been installed in the computer to protect you from injury. However, you should use good judgment to identify potential safety hazards:
11.. 22.. 33.. Please read these safety instructions carefully. Please keep this User's Manual for later reference. Please disconnect this equipment from AC outlet before cleaning. Don't use liquid or sprayed detergent for cleaning. Use moisture sheet or cloth for cleaning. For pluggable equipment, that the socket-outlet shall be installed near the equipment and shall be easily accessible. Please keep this equipment from humidity. Lay this equipment on a reliable surface when installed. A drop or fall could cause injury. 44.. 55.. 66.. 9 88.. 99.. 1100.. 1133.. 77.. Make sure to use the right voltage for the power source when connecting the equipment to the power outlet. Place the power cord in such a way that people can not step on it. Do not place anything on top of the power cord. All cautions and warnings on the equipment should be noted. If the equipment is not use for a long time, disconnect the equipment from the main power outlet to avoid being damaged by transient overvoltage. 1111.. Never pour any liquid into the opening, this could cause fire or electrical shock. 1122.. Never open the equipment. For safety reason, the equipment should only be opened by a qualified service personnel. If on the following situations arises, get the equipment checked by a service personnel:
a. The Power cord or plug is damaged. b. Liquid has penetrated into the equipment. c. The equipment has been exposed to moisture. d. The equipment has not worked well or you cannot get it work according to the user's manual. e. The equipment has dropped and damaged. f. If the equipment has obvious sign of breakage. 1144.. Do not leave this equipment in an environment unconditioned, storage temperature above 60C (140f), it may damage the equipment. 1155.. The unit can be operated at an ambient temperature of max. 35C. 1166.. The sound pressure level at the operators position according to IEC 704-1: 1982 is equal or less than 70 dB(A). 1177.. Power Cord Requirements The power cord set used with the AC adaptor must meet the requirements of the country where you use the AC adaptor, whether it is 100-120 or 200-240 Vac. The following information explains the requirements for power cord set 10 selection. The cord set must be approved for the country in which it is used. The appliance coupler must have a configuration for mating with a CEE22/EN6032/IEC 320 appliance inlet. A. For U.S. and Canada:
The cord set must be UL Listed and CSA Certified. The minimum specifications for the flexible cord are No. 18 AWG. B. For Japan:
All components of the cord set must bear a PSE or T mark and registration number in accordance with the Japanese Dentori Law. The minimum specifications for the flexible cord are .75m conductors. C. For Other Countries:
The cord set fittings must bear the certification mark of the agency responsible for evaluation in a specific country. The flexible cord must be of a HAR (harmonized) type H05VV-F. The cord set must have a current capacity of a least 2.5 Amperes and voltage rating of 125 or 250 Vac. 1188.. When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons. These precautions includes the following:
Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Use only the power cord indicated in this manual. 1199.. Do not use the AC adapter near open water or other liquids. Never spill liquid 11 into the AC adapter. 2200.. Laser Warning: Laser Class I Product Caution - Invisible laser radiation when open avoid exposure to beam. 2211.. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. Never remove the battery pack while the power is on as this may result in data loss when the system loses power. 2222.. The input receptacle is used as the main disconnecting device. WWiicchhttiiggee SSiicchheerrhheeiittsshhiinnwweeiissee 11.. 22.. 33.. 44.. 55.. 66.. 77.. 88.. Bitte lesen Sie diese Hinweis sorgfltig durch. Heben Sie dirse Anleitung fr den spteren Gebrauch auf. Vor jedem Reinigen ist das Gert vom Stromnetz zu trennen. Versenden Sie Keine Flssig- oder Aerosolreiniger. Am besten eignet sich ein angefeuchtetes Tuch zur Reinigung. Die Netzanschlusteckdose soll nahe dem Gert angebracht und leicht zugnglich sein. Das Gert ist vor Feuchtigkeit zu schtzen. Bei der Aufstellung des Gertes ist auf sicheren Stand zu achten. Ein Kippen oder Fallen knnte Beschdigungen hervorrufen. Beachten Sie beim Anschlu an das Stromnet die Anschluwerte. Verlegen Sie die Netzanschluleitung so, da niemand darber fallen kann. Es sollte auch nichts auf der Leitun abgestellt werden. Alle Hinweise und Warnungen, die sich am Gert befinden, sind zu beachten. 99.. 1100.. Wird das Gert einen lngeren Zeitraum nicht benutzt, sollten Sie es vom Stromnetz trennen. Somit wird im Falle einer berspannung eine Beschdigung vermieden. 1111.. Durch die Lftungsffnungen drfen niemals Gegenstnde oder Flssigkeien in 12 das Gert gelangen. Dies knne einen Brand bzw. Elektrischen Schlag auslsen. 1122.. ffnen Sie niemals das Gert. Das Gert darf aus Grnden der elektrischen Sicherheit nur von authorisiertem Servicepersonal geffnet werden. 1133.. Wenn folgende Situationen auftreten ist das Gert vom Stromnetz zu trennen und von einer qualifizierten Servicestelle zu berprfung.:
a. Netzlabel oder Netzstecker sind beschdigt. b. Flssigkeit ist in das Gert eingedrungen. c. Das Gert war Feuchtigkeit ausgesetzt. d. Wenn das Gert nicht der Bedienungsanleitung entsprechend funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen. e. Das Gert ist gefallen und/oder das Gehuse ist beschdigt. f. Wenn das Gert deutliche Anzeichen eines Defektes aufweist. 1144.. VORSICHT: Explosiongsgetahr bei unsachgemen Austausch der Batterie. Ersatz nur durch denselben oder einem vom Hersteller empfohlenem hnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. 1155.. Dieses Schaltnetzteil kann bis zu einer Auentemperatur von maximal 35C. 1166.. Die Ausgangswerte drfen nicht die auf dem Label angegebenen Werte berschreiten. 1177.. Anforderungen an das Stromkabel Das Kabel-Set, das an das Netzteil angeschlossen wird, muss den Anforderungen des Landes, in dem Sie das Netzteil einsetzen, gengen, je nachdem, ob die Netzspannung 100-120 oder 200-240V Wechselspannung betrgt. Das Kabel-Set muss fr das Land, in dem es eingesetzt wird, zugelassen sein. Der Gertestecker des Kabels muss in eine CEE22/ EN603/ IEC 320 Buchse passen. A. Fr die USA und Kanada:
13 Das Kabel-Set muss UL-gelistet und CSA zertifiziert sein. Die Minimalanforderungen fr das Kabel entsprechen No. 18 AWG. B. Fr Japan:
Alle Teile des Kabel-Sets mssen entsprechend dem japanischen Dentori Law mit einem PSE or T-Symbol markiert sein Die Minimalanforderungen fr das Kabel sind .75m Leiter. C. Fr andere Lnder:
Die Zubehrteile des Kabel-Sets mssen das Prfsiegel derjenigen Stelle, die in dem jeweiligen Land fr die Sicherheitsprfung zustndig ist, tragen. Das Kabel muss vom HAR (harmonisierten) Typ H05VV-F sein. Das Kabel-Set muss eine Stromkapazitt von mindestens 2,5 Ampere haben und Spannungen von 125 oder 250 V Wechselstrom gestatten. 1188.. Bei der Benutzung Ihres Telefongertes sollten Sie immer die grundlegenden Sicherheitsmanahmen beachten, um das Risiko von Feuer, Stromschlgen und Verletzungen zu minimieren. Zu beachten sind u.a. folgende Punkte:
Benutzen Sie das Gert nicht in der Nhe von Wasser, wie zum Beispiel Badewanne, Waschbecken, Splbecken, Waschbottich, in feuchten Kellerrumen oder in der Nhe von Schwimmbecken.
Benutzen Sie kein Telefon (ausgenommen schnurlose Modelle) whrend eines Gewitters. Es besteht das geringe Restrisiko eines Blitzschlages.
Benutzen Sie das Telefon nicht um ein Gasleck zu melden, falls es sich in der Nhe des Lecks befindet.
Benutzen Sie nur solch ein Stromkabel, wie in dieser Anleitung beschrieben. 1199.. Benutzen Sie das Netzteil nicht in unmittelbarer Nhe zu Wasser oder anderen Flssigkeiten. Gieen Sie nie Flssigkeiten ber das Netzteil. 2200.. Achtung Laser: Laser Produkt der Klasse I. Achtung - Unsichtbarer Laserstrahl, vermeiden Sie Kontakt mit dem Strahl bei offenem Gehuse. 14 2211.. Es besteht Explosionsgefahr, wenn der Akku nicht ordnungsgem ersetzt wird. Ersetzen Sie den Akku nur durch einen Akku gleichen oder quivalenten Typs, der vom Hersteller empfohlen wird. Entsorgen Sie Akkus entsprechend den Anweisungen des Herstellers. Entfernen Sie den Akku auf keinen Fall bei eingeschaltetem Notebook, da hierdurch Daten verloren gehen knnten. 2222.. Der Netzeingabeanschluss dient als Hauptschalter des Gerts. Things you must remember before working on your computer Let your computer acclimate itself Your notebook can easily stand temperature extremes but it doesnt like rapid changes in temperature, like going from the cold outdoors to a warm office. Rapid changes in temperature can cause water droplets to condense inside your case, threatening to damage the electronic parts inside. After receiving your notebook when its hot or cold outside, try not to power up the computer immediately, let the computer adjust to the room temperature gradually at least for three to four hours. If your system arrives in cold weather, do not apply power to the computer or monitor until they have been allowed to come to room temperature. Heat, Cold, Humidity, and Glare Find a suitable place for your computer thats not too hot, too cold, too dark, or too bright. Glare can make it hard to read the screen. Try to avoid the computer components from being destroyed if it is over heated, so try to allow plenty of room for air to circulate around the case. Do not block the ventilation opening. Do not place your computer in direct sunlight. 15 Suitable place to work Your computer will run well wherever youre comfortable but extremes of temperature and humidity can be challenging to your systems parts. There are some things you can tolerate that the computer cant things like static electricity, dust, water, steam and oil. In case you decide to pull over for roadside computing, try to choose a clean, comfortable work area for your system. A lithium-ion battery pack will be available when you are traveling. If you are running your system for the first time on battery power, remove the battery from the package, install it into the system and recharge the battery to fully prepare for service. 16 Page intentionally left blank 17 IInnttrroodduuccttiioonn There are more and more people spending large amounts of time in front of computer monitors now that scientists from many fields including anatomy, psychology, and occupational safety are involved in the study of ergonomically sound work environments. A few tips to help you work effectively without a lot of physical discomfort:
Purchase a chair with armrests and good back support. Don't slouch when sitting;
keep your back straight. 19 Try to place the LCD panel or external monitor so that there is little glare from the sun on the monitor. Walk around the room every hour. Every half hour look away from the computer screen for a few minutes. Place everything that you need to work within easy reach. Welcome to the Notebook PC Congratulations on your purchase of the Notebook PC. Your Notebook features the latest advances in portable computing technology. The Notebooks modular design provides maximum expandability without compromising portability. The high-performance CPU and enhanced IDE hard drive provides you with extra processing power for handling complex graphics and running large programs. One PCMCIA slot gives you the ability to use standard PCMCIA cards, such as a LAN adapter or memory cards. Getting to Know Your Computer Opening the LCD Panel At the front of the Notebook you will find a retaining latch on the display panel that locks the display in closed position when the Notebook is not in use. 20 11.. 22.. Slide the display panel latch to the right until the display panel releases, and then raise the LCD screen. At any time you can tilt the display toward or away from you to a comfortable viewing position. To avoid damage to the display panel:
1. Try not to slam the display upon closing it. 2. Try not to place any object on top when it is closed or open. 3. Be sure the system is turned off or in suspend mode before you close the display panel. With the LCD screen open, you will see several features important for operating your Notebook computer. 21 22 Each of these features is briefly described below. 11.. LCD Cover Release Latch Slide this latch to the right to open the LCD cover. 22.. LCD Screen Your Notebook computer is equipped with a replaceable color Liquid Crystal Display (LCD) screen that supports up to 1400 x 1050 resolution. A built-in backlight allows you to comfortably view the screen even when ambient lighting is low. Internet Explorer Button Use this key to open the Internet Explorer. 33.. 44.. Outlook Express Button Use this key to open Microsoft's Outlook to send/receive your mail. 55.. System Status Indicator Panel The system status indicator panel keeps you informed of the computers operating status. Indicates that the computer is accessing the hard disk drive. Indicates that the keyboard is in Num Lock mode. Indicates when the keyboard is in Caps Lock mode. In this mode, the keyboard produces uppercase text when you press a key. When you press the Caps Lock key again, the indicator goes off and the keyboard produces lowercase text. Indicates when the keyboard is in Scroll Lock mode. Some applications will move information across the screen differently when Scroll Lock is on. 23 66.. Power/Resume Button Pressing this button for 1-2 seconds will turn on the system or pressing this button when the computer is in Suspend mode will resume normal operation. Pressing this button for 4-6 seconds will also turn off the system. 77.. TouchPad The TouchPad is hardware-compatible with the IBM PS/2 mouse and software-
compatible with the Microsoft mouse. 88.. TouchPad Buttons The buttons below the TouchPad correspond to the left and right buttons on a standard mouse. The PS/2 compatible mouse will work with the Notebook PCs TouchPad simultaneously. 99.. Scroll Button Use this button to scroll up and down the scrolling bar. 1100.. The Built-in Microphone The built-in microphone is located to the left of the TouchPad. 24 The Left Side 11.. Ventilation Opening Please dont block this opening during operation of the system. 22.. 1394A A very fast external bus standard that supports data transfer rates of up to 400 Mbps
(400 million bits per second). 25 Can be used to connect up 63 external devices, also supports isochronous data --
delivering data at a guaranteed rate. This makes it ideal for devices that need to transfer high levels of data in real-time, such as video devices. Also supports both Plug-and-Play and hot plugging, and also provides power to peripheral devices. 33.. PCMCIA Socket Cover Open this cover to access the PCMCIA socket. The computers PCMCIA socket lets you extend the capabilities of your computer by inserting PC cards. 44.. PCMCIA Socket Button The computer has one PCMCIA type II socket 55.. The LAN Port This jack provides a standard RJ-45 connection for integration with an existing network or a high-speed (DSL or cable) connection via a network cable. When using a LAN, please use an EMI Shielding Cable to minimize an inteference when transmitting. 66.. The Modem Port This jack is an internal 56K voice/fax/data modem. You will connect your computer to your phone line through this port. Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. To reduce the risk of fire use only No. 26 AWG or larger telecommunication line cord. 77.. Microphone Jack Allows you to receive monophonic input from an external microphone. Use of an external microphone will disable the built-in microphone. 26 88.. Audio Line Out Jack You can plug an external speaker, headphone or connect the line out jack to an audio device such as a cassette recorder to record the notebook's audio output. LLEEDD IInnddiiccaattoorrss These three LED indicators are separately program for the following functions:
Power On, Suspend Mode and Battery Charge. 11.. Power On This indicator will lit when the notebook is powered On. 27 22.. Battery Charge This indicator will lit green when the battery is in charging status. When the indicator light turns off, it indicates the system is in full charge. 33.. Suspend Mode This indicator will lit when the notebook enter the suspend mode. The Right Side 28 11.. The CD-ROM/DVD-ROM or DVD CD-RW Combo (Option) Your Notebook comes with a swappable 24X (or higher) 5.25" IDE CD-ROM/DVD-
ROM/Combo Drive (DVD-ROM+CD-RW), DVD-RW, DVD+RW, DVD-Dual. 22.. DC IN Connector Plug the AC adapter into this connector. The Rear 29 11.. Ventilation Opening Please don't block this opening during operation of the system. 22.. Kensington Lock Allows you to connect a special computer lock to secure your system. You can purchase a lock at most computer retailers. 33.. S-Video Port Allows you to connect any S-Video ready television to your system. You can display output simultaneously on both the LCD and the television or toggle between the two screens. 44.. Parallel Port This port allows you to easily connect a parallel printer or plotter using this 25-pin bi-directional female port. 55.. External CRT Port 66.. This port allows you to easily connect an external VGA/SVGA display monitor into your Notebook using the 15-pin female connector. Infrared Data Port The Infrared Data Port allows your Notebook to become truly wireless. You can use this port to transfer large amounts of data very quickly to any other machine (Notebook computers, printers, etc.), which is also equipped with an IrDA-
compliant IR port. This allows you to print documents without any inconvenient cable hookups. 77.. USB Ports Your computer includes two Universal Serial Bus (USB) port. USB is the latest development in Plug and Play technology. 30 It will eventually replace the need for separate connectors for external keyboards, serial ports, and parallel (printer) port. The Bottom Panel 11.. MiniPCI/Wireless LAN/Modem Combo Compartment (Option) This compartment can be used to extend the capabilities of your system by providing a connection with various extension card. 22.. Expansion Compartment This compartment will serve as an expansion to upgrade your RAM module. 31 33.. Battery Release Latch Lift up this latch to release the battery from its bay. 44.. Battery Your notebook comes equipped with a factory-installed battery pack module. After the battery runs down, the module can be removed and replaced with a charged battery. 55.. Hard Disk Drive Your computer includes a 2.5-inch IDE hard disk drive (9.5mm in height). The notebook PC's BIOS automatically detects IDE drive types. 32 GGeettttiinngg SSttaarrtteedd Connecting to a Power Source Connecting the AC Adapter A universal AC adapter is provided to supply your computer with power and also charge the computers battery pack. The adapters AC input voltage can range anywhere from 100 to 240 volts, covering the standard voltages available in almost every country. requires a The power cord for the AC adapter three-hole grounded AC outlet. To connect the computer to an external power source:
11.. 22.. Plug the AC adapters connector into the DC-IN connector on the rear of the computer. Connect the power cord to the AC adapter and then to a wall outlet. The best kind of AC power source to connect your Notebook to is a UPS (Uninterruptible Power Supply). Lacking this, use a power strip with a built-in surge protector. Do not use inferior extension cords as this may result in damage to your Notebook. The Notebook comes with its own AC adapter. Do not use a different adapter to power the computer and other electrical devices. Whenever possible, keep the AC adapter plugged into the Notebook and an electrical outlet to recharge the battery. 34 Never turn off or reset your Notebook while the hard disk is in use and the HDD status icon is lit; doing so can result in loss or destruction of your data. Always wait at least 5 seconds after turning off your Notebook before turning it back on; turning the power on and off in rapid succession can damage the Notebooks electrical circuitry. Turning On Your Notebook Computer Turn on your Notebook by pressing the power button. Hold the button down for a second or two and release. The Power-On Self Test (POST) runs automatically. After the POST is completed, the computer reads the operating system from the hard disk drive into computer memory (this is commonly referred to as booting a computer). If your OS (Operating System such as Windows XP. etc) is installed, it should start automatically. To turn the Notebook off, save your work and close all open applications, click on Start, then select the Turn off the computer. A selection box will be displayed and click on the Turn Off button to shut down your computer. When your computer hangs up, press the power button for 4-6 seconds to shut down the computer Operating on Battery Power Your computer comes with a rechargeable battery pack that lets you operate the computer without an external power source. When the battery pack is fully charged, you can operate the computer for approximately 2 hours under the following conditions:
The battery pack initially has a full charge. No peripheral devices are installed. 35 36 The disk/CD-ROM drives run no more than 10% of the time. Only use batteries that are approved by an authorized dealer. All batteries are not the same and therefore should not be treated as such. Using the wrong battery could cause serious damage to your computer and yourself through toxic emissions. Inserting and Removing the Battery Pack The battery pack should already be inserted in your Notebook computer when you unpack it. If not inserted, follow these directions:
11.. Turn over the notebook with the front of the unit facing you and place it on a solid, flat surface. Angle the battery into the bay. The front edge of the battery should slide into the grooves in the system case. Gently lower the battery into the bay and push it until it clicks securely in the bay. 22.. 33.. To remove the battery pack:
11.. Turn off the notebook, and disconnect the AC adapter. Close the LCD panel and turn it over and place it on a solid, flat surface. Lift the release latch to release the battery from the bay. At this time the battery will now be angled slightly out of the bay. Hold the battery at the finger grip and lift it out of the compartment. 22.. 33.. Charging the Battery Pack The installed battery pack charges automatically any time the computer is connected to the AC adapter and an external power source. It is a good idea to occasionally discharge the battery pack fully to preserve its operating performance. 37 Page intentionally left blank 38 UUssiinngg tthhee NNootteebbooookk CCoommppuutteerr Adjusting the LCD Screen Display The LCD screen display can be adjusted by the following key combinations. KEYS FUNCTIONS
[Fn] + [F7] Decreases the brightness level.
[Fn] + [F8]
Increases the brightness level.
[Fn] + [F10] Use this key combination to expand your video screen or reset to its original size. This function will be disabled when the system is in Overlay mode (playing video).
[Fn] + [F12] This key combination toggles the display between the LCD, CRT, simultaneous LCD/CRT, and TV only. This function will be disabled when the system is in Overlay (playing video) or Extended Desktop mode. LCD Care LCD screens are delicate devices that need careful handling. Please pay attention to the following precautions:
When you are not using the computer, keep the LCD screen closed to protect it from dust. If you need to clean your LCD screen, use a soft tissue to gently wipe the LCD surface. Do not put your fingers or sharp objects directly on the surface and never spray Do not press on, or store any objects on the cover when it is closed. Doing so cleaner directly onto the display. may cause the LCD to break. EExxtteerrnnaall CCRRTT DDiissppllaayy You can hook up an external monitor through the 15-pin CRT connector. Configurations are available:
LCD only CRT only Simultaneous display of the LCD screen and CRT monitor TV only You can switch between these display configurations by pressing the key combination
[Fn] + [F12]. 40 A Tour of the Notebooks Keyboard The Notebooks keyboard uses a standard QWERTY layout with the addition of special function keys and an embedded numeric keypad for number intensive data entry. Your keyboard supports Windows by incorporating the two Windows specific keys. With the two Windows keys you will be able to access and take advantage of many of the timesaving features of Windows software. The function keys (F1-F12) on the top row of the keyboard, serve different purposes and carry out different tasks depending on the application you are running. The cursor (arrow) keys (which are all located in the lower right corner of your keyboard) and the [PgUp], [PgDn], [Home] and [End] keys (which are located along the right edge of the keyboard) allow you to move the active cursor of the computer to various locations on the screen or within the document. The embedded numeric keypad consists of 15 keys that make number intensive input more convenient. Like the [Num Lock] key, these keys are labeled in blue on the keycaps. Numeric assignments are located at the upper right of each key. When the numeric keypad is engaged, the NumLock icon will appear in the System Window. The keypad is activated by pressing the [Fn] + [NumLk] key. If an external keyboard is connected, pressing the NumLock key on either the Notebook or external keyboard will enable/disable NumLock of both keyboards in unison. To disable the Notebook numeric keypad while keeping the keypad on an external keyboard activated, use the [Fn] + [NumLk] hot key on the Notebook keyboard. 41 The Notebooks Hot Key Controls KEYS Power Button FUNCTION(S) Press this button once to power on or enter the suspend/resume mode. Press this button for more than 4 seconds to power off the system. Internet Button Open Internet WWW Home short-cut key Email Button
[Fn] + [F1]
[Fn] + [F2]
[Fn] + [F3]
[Fn] + [F4]
[Fn] + [F7]
[Fn] + [F8]
[Fn] + [F10]
Open Email Reader short-cut key This key combination turns on/off the battery beeping sound This key combination turns on/off the volume. Decreases the speaker volume. Increases the speaker volume. Decreases the brightness level. Increases the brightness level. Use this key combination to expand your video screen or reset to its original size. This function will be disabled when the system is in Overlay mode (playing video). This key combination toggles the display between the LCD, CRT, simultaneous LCD/CRT, and TV only. This function will be disabled when the system is in Overlay (playing video) or Extended Desktop mode.
[Fn] + [F12]
The TouchPad The touchpad is a rectangular electronic panel located just below your keyboard. You can use the static-sensitive panel of the touchpad and slit it to move the cursor. You can use the buttons below the touchpad as left and right mouse buttons. 42 TouchPad Precautions The TouchPad is a pressure sensitive device. Please take note of the following precautions. Make sure the TouchPad does not come into contact with dirt, liquids or grease. Do not touch the TouchPad if your fingers are dirty. Do not rest heavy objects on the TouchPad or the TouchPad buttons. You can use the TouchPad with Microsoft Windows as well as non-Windows applications. 43 Connecting an External Tracking Devices The system will only enables you to use one tracking device whether it is an internal or external tracking device. Data Storage and Retrieval Data storage and retrieval are two of the most fundamental tasks you will perform when working with your computer. The Notebook is equipped with a hard disk drive
(HDD). The HDD is removable allowing for easy upgrades. The CD-ROM/DVD-ROM/Combo Drive Features of the CD-ROM/DVD-ROM/Combo Drive The features of the CD-ROM/DVD-ROM/Combo Drive are listed below. The Audio Play feature allows you to play music CDs Front panel load/unload button Supports CD-DA, CD-ROM mode 1 and mode 2, Multi-Session Photo CD, CD-I/Video CD (pcs.) Low power consumption 12.7mm height Precautions for Handling CD-ROM/DVD-ROM/Combo Drive Always hold the disc by the edges, avoid touching the surface. Use a clean, dry, cloth to remove dust, smudges, or fingerprints. Wipe from the center outward. Do not write or place objects on the surface of the disc. 44 Store discs in a cool dry place not to damage the disc. Do not use benzene, thinners, or cleaners with detergent. Only use CD-
ROM/DVD-ROM cleaning kits. Do not bend or drop the discs. Loading a Disc To play a CD disc, follow the instructions listed below. 11.. Push the CD-ROM/DVD-ROM/Combo Drive eject button on the CD drive door. Gently pull the tray all the way out. Carefully lift the CD-ROM/DVD-ROM/Combo Drive by the edges and make sure the shiny surface is face down (the side with no writing on it). Carefully insert the CD-ROM onto the tray. Push the CD-ROM/DVD-ROM/Combo Drive down gently so that it snaps onto the center ring. Push the tray back into the drive. 33.. To remove a disk, do the following:
11.. Check the LED display and make sure that the computer is not accessing the CD-ROM/DVD-ROM/Combo Drive. Push the eject button and pull the tray all the way out. Carefully pick up the CD disk by the edges and while pressing down on the center ring remove the CD-ROM/DVD-ROM/Combo from the tray. 22.. 22.. 33.. 45 Do not insert any foreign objects into the disc tray. If you experience difficulty when ejecting the CD disk tray, stretch a paper clip (or use a pin or a thin metal rod) and insert it into the emergency eject hole located on the right side of the front panel. The CD disk tray should eject immediately. This procedure can also be used to remove a CD from the drive when the Notebook is powered off. PCMCIA Cards and Expansion Sockets The Notebook features one PCMCIA expansion socket design to interface with one Type II card. 46 Inserting a PCMCIA Card The computer will emit a medium tone followed by a high tone when a PC card is inserted. When you eject a card, the computer will emit a high tone followed by a medium tone. You can insert and remove a PC card whether the computer is turned On or Off. Follow these instructions to insert a PCMCIA card:
11.. Hold the PCMCIA card with the arrow side up and the connector side toward the socket. Align the card connectors with the socket and carefully slide into the socket until it locks into place. The system will beep once to indicate that it has detected the PC card. 22.. To remove a PC card push the eject button, the button will pop out, push the button again to eject the PCMCIA. When inserting a Type II PC card, make sure the connector is inserted in the socket. Before ejecting a PC card, ensure that it is not being accessed by the System. For example, if the message Write protect error writing Drive x is displayed, the user has to change the write protect switch setting on the memory card. To change the switch setting, (a) eject the card, (b) change the switch setting, and (c) re-insert the card. Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. 47 Power Saving Modes This section contains information on the Notebooks power system, including the AC Adapter, the battery system, recharging the battery, and tips for conserving battery power. The power system is comprised of two parts, the AC Adapter and the battery system. The AC Adapter converts AC power from a wall outlet to the DC power required by the computer. The Battery Power System A fully charged pack will provide approximately 2 hours of battery life depending on your system configuration application it runs. Before using the computer on battery power for the first time, check the battery status icon on the Windows Toolbar to make sure the battery is fully charged. See Battery Status later in this section for a description and explanation of the Windows Battery icon. Charging the battery takes about 3 hours to charge when the system is in off state. If possible, always charge the battery completely. Removing the Battery Pack To remove the battery pack from its compartment, please refer to Chapter 3, Inserting and Removing the Battery Pack. Preparing the Battery Pack for Use Before using the battery pack for the first time, the Smart Battery IC within the battery pack should be calibrated in order to get accurate reporting of remaining battery life status. 48 To calibrate the battery pack follows the instructions below:
11.. Insert the battery into the battery compartment and turn on the Notebook. If the battery is completely without power go to the next step. Otherwise, let the battery run down until the battery low-low warning beeps are heard. The system will automatically enter Suspend mode. Turn the Notebook off. Connect the AC adapter and let the battery fully recharge. When the battery charge indicator turns off, the battery is fully charged. Turn On the notebook, let the battery run down until the battery is in low-low state and you hear a warning beeps. The system will automatically enter the Suspend mode. You can now connect the AC adapter. The battery pack is now calibrated properly. 44.. In general, using the battery until the low-low battery-warning indicator appears and fully recharges the battery each time (full discharge/charge cycle) will ensure the accurate reporting of the battery gauge status. 22.. 33.. Automatic Battery Pack Charging Function You can automatically charge the battery pack by using the AC Adapter. The charge time is about three hours when the Notebook power is turned off. The following table summarizes the charging modes:
Charge Mode Fast 3 hours with the system off or in Suspend mode. The temperature must be 25C or below room temperature. A pre-charge is supplied to the Li-Ion battery pack. Pre-Charge Charge Time 49 Battery Status Windows XP has an applet in the Control Panel that will display an icon in the Windows taskbar indicating when the Notebook is running on battery power or is attached to the AC adapter. This applet also displays a meter that indicates how much charge is remaining in the battery. Battery Low Warning When the pack initially reaches the Battery Low state approximately 10 ~ 15 minutes of the usable battery life is left. You will hear an audible beep signal every 1.5 seconds alerting you to the Battery Low status. When the battery power reaches the Battery Low Low status the beeping sound will accelerate. Your battery now has 1 ~ 2 minutes of battery charge remaining. You must save your data or connect AC power immediately; otherwise, you may lose your data. Sound Continuous beeping every 1.5 seconds Beeping accelerates Meaning Battery Low: Indicates that there is 7 to 10 minutes charge remaining. Battery Low Low: Indicates that there is 1 to 2 minutes of battery charge remaining. Save your work and turn off the Notebook, or connect the AC adapter. When there is only one minute of battery charge remaining, the Notebook will suspend to the HDD and power off. You should connect AC power and resume to save your work. 50 Small Battery for the Real Time Clock There is a small built-in battery pack that supplies power to the system in order to maintain certain system information while the power is off. If the Notebook is left without a power source for long period of time, this battery will be exhausted and system information will be lost. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. Never remove the battery pack while the power is on as this may result in data loss when the system loses power. Resetting the System After installing a software application package, you may be prompted to reset the system to load the changed operating environment. To reset the system, or reboot, press the [Ctrl] + [Alt] + [Delete] keys simultaneously. This is known as warm boot. This key combination acts as software reset switch when you encounter hardware or software problems, which lock up the Notebook. If this key combination does not shut down the Notebook, you can reset the Notebook by using the Notebooks power button. Should the Notebook lock up for some reason, pressing this button powers the Notebook off. Adjusting the Brightness To adjust the brightness on the LCD screen, press and hold down the [Fn] key in the lower left hand corner of the keyboard and press the [F7] key to reduce the brightness or [F8] to increase the brightness. 51 Page intentionally left blank 52 DDeesskkttoopp OOppeerraattiioonn Your notebook is capable of providing you with efficient and productive mobile computing, it also has the speed and capacity to service as a desktop system. This chapter discusses those functions of your notebook that are typical of desktop systems. Audio The Multimedia Sound System The Notebooks built-in audio capabilities allow you to take advantage of a wide range of education and entertainment multimedia software. The Notebook is equipped with internal stereo speakers, a microphone, and input audio ports for external audio units. An external microphone can be connected to the microphone jack. External speakers or headphones can be connected to the Notebooks audio-out jack. External audio devices can be connected to the Line in jack. All audio features are software controlled. The Notebooks multimedia sound system includes the following features:
Supports Windows Sound System compatibility Full Duplex operation Dynamic filtering reduces noise and distortion rate 16-bit digitized audio playback A built-in microphone for convenient recording Built-in stereo speakers Digitized audio recording through the Notebooks built-in microphone or any external source Audio Volume Control The Notebook is equipped with hot-key volume controls: Pressing the [Fn] + [F3]
hot-key combination decreases the audio output volume, press the [Fn] + [F4] hot-
key combination increases the audio output volume. 54 Audio Software Your notebook comes equipped with an integrated sound system capable of providing you with quality audio sound through the built-in speakers or through external speakers connected via the system ports. Sound Recording Your system allows you to record sounds and store them as files using the microphone via the microphone jack on the rear of the notebook computer. Check the Windows Help and Support Center in Windows for information on using the various elements in sound recording. For a high-quality sound, click on the "Volume Control" at the lower right end of your screen. From the Volume Control windows, click on the "Advanced" tab, click and select the "Microphone Boost" item. Playing Sound Files Your notebook can play audio files stored in MIDI, WAVE or MP3 file format. Check the Help and Support Center in Windows for information on the functions of the Media Player. External Speakers and Microphone The sound system is capable in providing high-quality sound to external speakers and receiving and processing sounds from an external microphone or external sound source. Connecting Peripheral Devices To expand your computing capabilities, you can add a variety of external devices to your computer. You may, for example, want to add a mouse, modem, or a printer. 55
| 1 | Users Manual Part 2 Revision 2 | Users Manual | 1.57 MiB | July 09 2004 |
The computer is equipped with several interface ports, including an enhanced parallel
(printer) port, a serial port, and USB ports. These are provided as a means of connecting peripheral devices to the computer. Connect peripheral devices to the computer's interface ports as shown below:
56 57 Page intentionally left blank 58 RRuunnnniinngg BBIIOOSS SSeettuupp Introduction The BIOS (Basic Input and Output System) Setup program is a menu driven utility that enables you to make changes to the system configuration and tailor your system to reflect installed hardware or alter system performance. When the Notebook is turned back on, the system is configured with the values stored in CMOS. With easy-
to-use menus, you can configure such items as:
Hard drives and peripherals Bootup Drive Sequence Password protection The settings made in the BIOS Setup program intimately affect how the Notebook performs. Navigating through BIOS Setup The Setup program has been designed to make it as easy to use as possible. If you accidentally make a setting and dont know which one to switch back to, the Setup program has a hot key that allows you to return to the previous value. Accessing the BIOS Setup Program To access the BIOS Setup program, press the DEL key after the Notebook has run through its POST. Item Specific Help On the right side of the Setup screen is an area labeled Item Specific Help. This area will list navigation key shortcuts and information that is specific for the item that you are currently editing. The Menu Bar The top of the screen has a menu bar with the following selections:
Main - Use this menu to make changes to the basic system configuration. Advanced - Use this menu to enable and make changes to the advanced features available on your system, such as enabling the FIR module. 60 Security - Use this menu to set a password. The password allows bootup and controls access to the BIOS setup menu. Boot - Use this menu to configure the default system device used to locate and load the Operating System and for booting up the Notebook. Exit - Use this menu to exit the current menu or specify how to exit the Setup program. To access the menu bar items, press the right or left arrow key on the keyboard until the desired item is highlighted. The Legend Bar At the bottom of the Setup screen you will notice a legend bar. The keys in the legend bar allow you to navigate through the various setup menus. The following table lists the keys found in the legend bar with their corresponding alternates and functions. Legend Key Alternate Key Function F1 Esc or Tab Keypad arrow keys Enter Displays the General Help window. It can be enabled from anywhere in the BIOS. Jumps to the Exit menu or returns to the Main menu from a submenu. Selects the menu item to the left. Selects the menu item to the right. Moves the cursor up and down between fields. Moves the cursor to the next position available in the field. 61 Minus key (-) Plus key (+) Home End F9 F10 Enter PgUp PgDn Launching Submenus Scrolls backward through the values for the highlighted field. Scrolls forward through the values for the highlighted field. Moves the cursor to the field at the top of the window. Moves the cursor to the field at the bottom of the window. Sets the parameters for the current menu to their default values. Save and Exit. Will select a sub menu or show a range of options for a field. Note that a right pointer symbol appears to the left of certain fields. This pointer indicates that a submenu can be launched from this field. A submenu contains additional options for a field parameter. To call up a submenu, simply move the cursor to highlight the field and press the
[Enter] key. Use the [Esc] key to return to the Main menu. General Help In addition to the Item Specific Help window, the BIOS Setup program also provides a General Help screen can be called up from any menu by simply pressing [F1]. 62 Use the [PgUp] and [PgDn] keys or the up and down arrow keys () to scroll through the entire help document. Press the Home key to display the first page, press End to go to the last page. To exit the help window, press the [Enter] or the [Esc]
key. Save Changes and Exit the Setup Program Refer to the Exit menu section of this chapter for detailed information on saving changes and exiting the setup program. The Main Menu When the Setup program is accessed, the following screen appears:
63 The Advanced Menu Selecting Advanced from the menu bar displays the Advanced menu:
64 The Security Menu The Notebooks advanced system of security allows you to set a password to prevent unauthorized access to system resources, data, and the BIOS Setup Program. 65 The Boot Menu The Boot menu allows the user to specify the order in which the Notebook is to check for a device to boot the system. You can also configure the way that the system will boot up. To make changes, select Boot from the menu bar. The following screen appears:
66 The Exit Menu Once you have made all of your selections from the various menus in the Setup program, you should save your changes and exit Setup. Select Exit from the menu bar to display the following menu:
67 Page intentionally left blank 68 TThhee SSooffttwwaarree UUttiilliittiieess DDiisskkss AutoRun Installation Follow the step-by-step procedures on the CD-ROM/DVD-ROM to execute the AutoRun application by selecting the topic of Driver Installation. If you encounter this message when executing the Auto Run in Windows 2000, please perform the following procedures:
Click on the Start Setting Control Panel System Advanced tab Performance tab Change tab reduce the maximum Virtual Memory setting to 200MB. Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive. Installing the INTEL_INFINST Driver Click Start and Select Run. Type the following: D:\Driver\INTEL_INFINST\INFINST_enu (If D is not your CD-ROM/DVD-ROM drive, substitute D with the correct drive letter). Click on INFINST_enu to begin the Installation Wizard. Follow the Wizards on-screen instructions to complete the installation. Restart the system. Installing VGA Display Drivers This section describes the operation and installation of VGA display software drivers supplied on the Driver Utility CD-ROM that is shipped with your computer. Click Start and Select Run. Type the following: D:\Driver\VGA\Win2K&XP\Setup.exe (If D is not your CD-
Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive. ROM/DVD-ROM drive, substitute D with the correct drive letter). Click on Setup to begin the Installation Wizard. Follow the Wizards on-screen instructions to complete the installation. Restart the system. Intalling the Audio Driver To install the audio driver you must first remove the currently installed driver. 70 Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive. Click Start and Select Run. Type the following: D:\Driver\Audio\Setup.exe (If D is not your CD-ROM/DVD-
ROM drive, substitute D with the correct drive letter). Click on Setup to begin the Installation Wizard. Follow the Wizards on-screen instructions to complete the installation. Restart the system. Intalling the IR Driver To install the audio driver you must first remove the currently installed driver. Click Start and Select Run. Type the following: D:\Driver\IR\Setup.exe (If D is not your CD-ROM/DVD-
Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive. ROM drive, substitute D with the correct drive letter). Click on Setup to begin the Installation Wizard. Follow the Wizards on-screen instructions to complete the installation. Restart the system. Intalling the LAN Driver To install the LAN driver you must first remove the currently installed driver. Click Start and Select Run. Type the following: D:\Driver\LAN\Setup.exe (If D is not your CD-ROM/DVD-
Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive. ROM drive, substitute D with the correct drive letter). Click on Setup to begin the Installation Wizard. Follow the Wizards on-screen instructions to complete the installation. Restart the system. 71 Installing the TouchPad Driver To install the touchpad driver you must first remove the currently installed driver. Click Start and Select Run. Type the following:
Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive. D:\Driver\Touchpad\Win2K&XP\Setup.exe (If D is not your CD-ROM/DVD-
ROM drive, substitute D with the correct drive letter). Click on Setup to begin the Installation Wizard. Follow the Wizards on-screen instructions to complete the installation. Restart the system. Installing the MDC Modem Driver Please follow these instructions to install the Modem driver:
Click Start and Select Run. Type the following:
Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive. D:\Driver\MDC\Liteon\Win2K&XP\MDMCHIPV.inf or D:\Driver\MDC\Billionton\WinXP\Setup.exe or D:\Driver\MDC\Billionton\Win2K\Setup.exe or D:\Driver\MDC\QCOM\Win2K&XP\Setup.exe (If D is not your CD-ROM/DVD-
ROM drive, substitute D with the correct drive letter). Click on Setup to begin the Installation Wizard. Follow the Wizards on-screen instructions to complete the installation. Restart the system. Installing the MiniPCI Wireless LAN Card Driver Please follow these instructions to install the Wireless LAN driver:
72 From Start, click on the "My Computer" icon and click the "View System Information". Click on the "Hardware" tab from the "System Properties" dialog window. Click the "Device Manager" button. Double click on the "Other Devices" , double click the " Network Controller "
and click on the "Driver" tab. Click the "Update Driver" tab and select the "Install from a list or specific location (Advanced)" item and click "Next". Select the "Include this location in the search" item and click on the "Browse"
button and specify for the designate location of your CD driver D:\Driver\MiniPCI\Intel\21003B\PROW7100\WinXP\W70N51.inf (WinXP Intel 21003B) D:\Driver\MiniPCI\Intel\21003B\PROW7100\Win2K\W70N5.inf (Win2K Intel 21003B) D:\Driver\MiniPCI\Intel\2200BG\PROW2200\WinXP\W22N51.inf (WinXP Intel 2200BG) D:\Driver\MiniPCI\Intel\2200BG\PROW2200\Win2K\W22N50.inf (Win2K Intel 2200BG) D:\Driver\MiniPCI\Billionton\WinXP\NET8180.inf (WinXP Billionton) D:\Driver\MiniPCI\Billionton\Win2000\NET8180.inf (Win2K Billionton) D:\Driver\MiniPCI\QCOM\802MR\WinXP\NET8180.inf (WinXP QCOM 802MR) D:\Driver\MiniPCI\QCOM\802MR\Win2000\NET8180.inf (Win2K QCOM 802MR) VGA Utilities After you have restarted Windows, open the Control Panel and double click on the Display icon. From the Display Properties window, select the Settings tab and click on the Advanced tab to enter the INTEL 82852/82855 GM/GME Graphics Controller Properties" window. 73 Devices You can connect up to three displays simultaneously to the notebook. You can watch a DVD movie on an external television while checking email on your notebook screen - or surf the web on a CRT monitor while working on a presentation on a digital flat panel. The option is yours with these features. 74 75 76 77 78 Color You can adjust the right resolution for your screen display. 79 Schemes 80 Hot Keys 81 OpenGL 82 Page intentionally left blank 83 TTrroouubblleesshhoooottiinngg This chapter describes locating and solving problems that you may encounter while using your computer. Locating a Problem Problems with your computer can be caused by something as minor as an unplugged power cord or as major as a damaged hard disk. The information in this chapter is designed to help you find and solve minor problems. If you try all the suggested solutions and you still have a problem, make a list of what steps you have taken to correct the problem and contact your dealer. Successful troubleshooting is the result of careful observation, deductive reasoning, and an organized approach to solving the problem. The problems that you will encounter can be divided into two basic categories:
hardware problems and software problems. Hardware problems can be further divided into electrical and mechanical problems. You will know you have a hardware problem if the screen is dark, the computer cannot read the disk drives, or you get an error message during the Power-On Self Test (POST). Software errors can occur at several levels. The ROM BIOS and the operating system can give you a large number of error messages. On top of this, each application software package has its own set of error messages. It is important to determine whether the software error message you are getting is from the application or the operating system. Once you know this, you can look in the respective manual for a solution to the problem. Checking Cables and Connections Start by performing a careful visual inspection of the exterior of the computer. If no LEDs are illuminated, make sure that your computer and its peripherals are getting power and communicating with each other properly. To check the power cables, and connections:
11.. If you have been using battery power, connect the Notebook to an external power source and make sure that the battery has a charge. If you are using the Notebook with the AC adapter, check the power outlet, the power cord, and any power switches that may affect your computer. 22.. 85
Check the wall outlet or power strip with an item that you know is functioning properly. A lamp or radio is a convenient item for checking the power. You may also need to check the fuses and breakers in your electric box.
If the outlet is controlled by a wall switch, make sure that the switch is on.
If the outlet is controlled by a dimmer switch, use a different outlet.
If your computer is plugged into a power strip with an On/Off switch, make sure the switch is on. 33.. With the computers power switched off, check all cable connections. If the computer is connected to any peripheral devices, look for loose or disconnected cables. If the computer is too close to a wall, a cable connection may be loose or the cables may be crimped. Do not substitute cables for different devices (other than the manufacturer recommended cables) even if they look exactly alike. The wiring inside the cable may be different. 44.. When you are certain that you have power available and all connections are good, turn the computer on again. If the computer still does not start, you may have a hardware problem. The Power-On Self Test The Power-On Self Test (POST) runs every time you turn on or reset the Notebook. The POST checks memory, the main system board, the display, the keyboard, the disk drives, and other installed options. A few seconds after you turn on your computer, a copyright message appears on your display screen. A memory test message appears next; as the test continues, memory size increases until all installed memory is tested. Normally, the only test routine visible on the screen will be the memory test. 86 Two classifications of malfunctions can be detected during the POST:
Error messages that indicate a failure with either the hardware, the software, or the Basic Input/Output System (BIOS). These critical malfunctions prevent the computer from operating at all or could cause incorrect and apparent results. An example of a critical error is microprocessor malfunction. Messages that furnish important information on the power-on and boot processes
(such as memory status). These non-critical malfunctions are those that cause incorrect results that may not be readily apparent. An example of a non-critical error would be a memory chip failure. In general, if the POST detects a system board failure (a critical error), the computer halts and generates a series of beeps. If failure is detected in an area other than the system board (such as the display, keyboard, or an adapter card) an error message is displayed on the screen and testing is stopped. It is important to remember that the POST does not test all areas of the computer, only those that allow it to be operational enough to run diagnostic programs. If your system does not successfully complete the POST, but displays a blank screen, emits a series of beeps, or displays an error code, consult your dealer. General Hardware Problems A few common hardware problems and suggested solutions are presented in the table below:
Problem: Failure in the installation of the Audio driver. Solution: Be sure to first remove the current audio device from your system. Please follow the instruction on the installation of audio driver. Problem: The display screen is dark 87 Solution: Make sure that the computer is not in Suspend mode. Check the Brightness controls for the screen. If the controls are turned too far down, the screen will be dark. Problem: An incorrect date and time are displayed. Solution: Correct the date and time using the DOS DATE and TIME commands or the options in the Setup Utility. If the date and time become incorrect after a short time, your CMOS battery may be depleted. Contact your dealer to change the battery. Problem: The message: Invalid system disk, Replace the disk, and then press any key appears during boot. Solution: Check and make sure that you do not have a non-bootable floppy diskette inserted in your floppy drive. If your USB FDD is empty, you may not have an operating system installed on your drive. Contact technical support for assistance. Problem: You hear irregular beeps during operation of the Notebook and the system halts. Solution: The problem is beyond the scope of this manual. Contact technical support. Problem: An unidentified message is displayed. Solution: Reboot the computer and run the BIOS system setup. Confirm the Setup parameters. If the same message is displayed after booting up again, contact technical support for assistance. Problem: The system cannot access the CD-ROM/DVD-ROM drive. 88 Solution: Check that a CD is properly inserted in the drive. Make sure that you are using the correct program for that kind of CD. For example, the system cannot read a data CD using an audio program. Problem: You cannot operate the printer. Solution: Check the printer cable connection. Ensure that the printer power switch is turned on. Confirm that the printer is on-line. Problem: You cant save data to disk. Solution: Ensure that the disk has been formatted. Consult your operating system manual for information on formatting floppy diskettes. Problem: The diskette is write-protected. Solution: Eject the diskette, remove the write protection, and try again. Problem: The diskette if full. Solution: Try using another diskette or free up some space on the diskette. The disk drive is not operating. Contact your dealer for support. Problem: You cannot use the mouse. Check the cable connection. Check the mouse with another application to see if there is a software incompatibility problem. If possible, check the mouse with another computer to see if it works. If it doesnt operate on a different system, the mouse might be broken. Contacting Your Dealer 89 If you still have a problem after reading the preceding sections, the next step is to contact your dealer. Your dealer can determine if the problem is something that requires the computer to be taken to the shop. Before you call your dealer, however, prepare the following information:
How is your computer configured? Your dealer needs to know what peripheral devices you are using. What messages, if any, are on the screen?
What software were you running at the time?
What have you done already to try to solve the problem? If you have overlooked a step, your dealer may be able to solve the problem over the phone. 90 Page intentionally left blank 91 UUppggrraaddiinngg yyoouurr SSyysstteemm Upgrading your Memory Refer to the following instructions and illustration for information on upgrading your notebook's memory. 11.. 22.. Turn off the computer and disconnect the AC adapter and all peripherals. Turn the notebook over so that the rear ports are facing you and locate the memory module compartment. Remove the screws that secure the RAM module compartment cover and set it 33.. 44.. 55.. 66.. 77.. 88.. 99.. aside in a safe place. Remove the compartment cover and then angling it up and out. If you need to install a higher capacity module, gently push the edge clips on both sides to release the module. Angle the card slightly upward and gently slide it from its edge connector slot. Store the card in the anti-static bag that contains your new module(s). To install the new memory card, hold the card with its gold edge connector toward the edge connector slot of the compartment. To help you orient the cards, the edge connector has been made with two unequal-length sections. You will only be able to insert the card in one direction. Insert the edge connector into the slot. The gold edge connector of the card should not be visible when the card is fully inserted. Press the card downward where you should hear an audible click as the latches of the connector secure the card in place. Once the module is properly seated, you can replace the cover on this compartment. 1100.. Replace and tighten the screw. 93 The Easy to Upgrade HDD Module The hard drive in your notebook computer is made to be easily swapped out for upgrading. You should back up your hard drive before attempting o change the hard drive. Make sure that before you install a new drive, all the files in your system should be backed up. To upgrade your Hard Drive 94 11.. 22.. 33.. 44.. 55.. 66.. 77.. 88.. 99.. Power down the system completely. Turn the system over with the front of the unit facing you. Remove the three screws that secure the compartment cover and set them in a safe place. Slide the HDD cover away from the compartment. The drive is attached to a special bracket that secures it to the notebook computer. There are 4 screws hold the bracket. Remove the screws and set them in a safe place. Push the HDD slightly in the direction of the arrow as shown in the illustration to release it from the pins of the drive. Gently hold the grip of the HDD, lift it up to release from its compartment. To install the new HDD, you will need to align the tabs on the drive bracket with the slots on the bay. Press down gently on the drive bracket until it engages with the system. Do not force the drive into place this can bend the pins on the hard drive. Slide the compartment cover into place and be sure the screw holes on the cover align completely with the screw holes in the case. Secure the cover with the three screws. Upgrading your System CPU Refer to the following instructions and illustration for information on upgrading your notebook's CPU 11.. Turn off the computer and disconnect the AC adapter and all peripherals. From the rear side of your notebook, use your index finger to lift up the hinge cover attached to the LCD screen. Bend your LCD screen into 90 degree angle then carefully lift up the hinge cover. 22.. 95 96 33.. Remove the screen that is attached to the keyboard in order to remove the heatsink on top of the CPU. 44.. Remove all the screws attached to the heatsink. 55.. Before removing the screws, there are certain measures to followed in removing the heatsink 66.. 77.. 88.. To remove the heatsink, first loosen the screw carefully. After loosening one screw, be certain that the next to be loosen should be the screw on its adjacent side as shown on the illustration. Be sure to loosen all the screws first before removing it totally to release the heatsink. Failure to do so will cause a major damage to the heatsink. Now you can totally remove all the screws also in that order when you first loosen the screw. 97 SSppeecciiffiiccaattiioonn Detailed Notebook Specifications General CCPPUU Intel Pentium-M Banias processor from 1.3GHz to 1.7GHz, 1M L2 cache Intel Dothan processor from 1.8GHz to 2.0GHz, 2M L2 cache TDP : 21W. 478 pin uFC-PGA2 478 socket, CPU front-side bus up to 400MHz CCoorree LLooggiicc Intel 855GM/GME, Support FSB 400MHz Memory MMaaiinn MMeemmoorryy 2 expandable memory slot up to 2GB,1GB per DIMM Max. with 512Mb technology 128/256/512 MB memory options Two 200 pin SO DIMM type memory slots 2.5V TSOP/CSP/WBGA DDR SDRAM Supports DDR266/333 Synchronous SDRAM RROOMM 512KB Flash ROM factory option, 3V erase Boot block protection Mass Storage HHDDDD Support enhanced IDE (PIO mode 4) and bus master(Ultra DMA 33/66/100 mode). Removable hard disk drive, 2.5 9.5mm. 99 MMoodduullee BBaayy Supports CD-ROM/DVD-ROM/Combo Drive (DVD-ROM+CD-RW), DVD-RW, DVD+RW, DVD-Dual; 5.25 12.7mm height Fast IDE and ATAPI interface CD-ROM/DVD-ROM/Combo Drive (DVD-
ROM+CD-RW), DVD-RW, DVD+RW, DVD-Dual PPooiinnttiinngg DDeevviicceess Synaptics TouchPad Support four way scrolling feature KKeeyybbooaarrdd US/Europe, DOS/V keyboard for Japan, full size keyboard alike pitch 300 mm keyboard with key stroke 3.0mm Twelve function keys and Windows Function key 2 short-cut keys: WWW & eMail Internal keyboard works a standard 101/102 desktop keyboard Audio CCoonnttrroolllleerr Built-in Intel ICH 4-M chipset CCooddeecc Realtek ALC202A 100 FFeeaattuurreess Dual full-duplex Direct Sound Channels Hardware SoundBlaster Pro for real-mode DOS legacy compatibility 18-bit ADC & DAC resolution Support S/PDIF out AC97 2.2 & PC2001 compliant I/O Ports SSttaannddaarrdd PPoorrttss One parallel port supported EPP/ECP (25-pin female D-connector) One S-video TV out port for TV One DC input port for External AC adapter (2-pin DC jack) One Type II PCMCIA card socket One video port for external analog VGA monitor (15-pin female D-connector) USB 2.0 port x 2 MIC-in, headphone jack w/ adaptor for 5.1 channel SP/DIP support RJ-11 jack for Fax/Modem RJ-45 jack for LAN IEEE 1394 mini-jack PPCCMMCCIIAA Controller : RICHO R5C551 Supports 1 PC Card/CardBus slot Supports 16-bit & cardBUs PC Cards, PCI rev. 2.2 and PC Card Standard Release 7.0 compliant 101 Data transfer rate : 100/200/400 Mbps Integrated IEEE 1394a OHCI-link & two ports with IEEE 1394 internal PHY Graphics and Video CCoonnttrroolllleerr Intel 855GM/GME internal graphics. FFeeaattuurreess High performance 3D graphics engine (floating triangle setup/rendering) GGrraapphhiicc MMeemmoorryy Up to 64 MB of dynamic video memory allocation LLCCDD DDiissppllaayy 14.1XGA/15XGA/15 SXGA TFT Electrical AACC AAddaapptteerr External universal type AC adapter, output maximum 65W SSmmaarrtt BBaatttteerryy Li-Ion battery @ 27 Whrs (4-cell); Optional 8-cell 53W User interchangeable Removable and rechargeable 3 hrs charge time while system off 102 4 hrs charge time while system on Charging time for one battery pack : 3.5 hours to full charge when system off or in suspend More than 2.0 hrs w/ 4-cell battery, 4.0 hrs w/ 8-cell battery Dimensions 326(W) x 258(D) x 25.3(H) mm/32mm (front/back) Weight 2.4kg with 14.1 panel, Battery and DVD-ROM Drive installed Operating Environment TTeemmppeerraattuurree Operating: 5C ~ 35C Storage: -20C ~ 60C HHuummiiddiittyy Operating: 30% ~ 90% (non-condensing) Non-operating: 10% ~ 90% (non-condensing) AAllttiittuuddee Operating: -200 to 10,000 feet above sea level Non-operating: -200 to 30,000 feet above sea level. Options Spare Li-Ion Battery Pack : 4-cell battery and 8-cell battery 103 Factory Option : 802.11b wireless LAN with MiniPCI slot Memory Extension Card Module bay : CD-ROM/ DVD-ROM/ Combo(DVD-ROM+CD-RW) Drive, DVD-
RW, DVD+RW, DVD-Dual Bootable external USB FDD Accessories Users Manual & Driver CD title AC Adapter Power Cord Software Specifications SSyysstteemm SSooffttwwaarree System BIOS: AMI BIOS Supported Operating Systems
Optional Windows XP or above version Standard Software Drivers
INTEL_INFINST driver,
VGA driver,
Audio driver,
Touch-Pad driver,
IR driver,
MDC Modem driver,
LAN driver,
MiniPCI Wireless LAN driver 104 Declaration of Conformity 1. Notebook / Green553 2. This device complies with part 15 of FCC rules. The operation is subject to the following two conditions: (1) The device may not cause harmful interference. And (2) this device must accept any interference received, including the interference that may cause undesired operation Information of Responsible Party in USA Contact Person: Hank Yu Company Name: Elitegroup Computer Systems, Inc. US Headquarter Address: 45401 Research Ave, Fremont CA 94539 TEL: 510-226-7333 FAX: 510-226-7350 E-mail: Support@ecsusa.com 105
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2004-08-29 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2004-08-29
|
||||
| 1 | Applicant's complete, legal business name |
Elitegroup Computer Systems Co., Ltd
|
||||
| 1 | FCC Registration Number (FRN) |
0011157468
|
||||
| 1 | Physical Address |
3F, No. 240, Sec.1, Nei Hu Rd.
|
||||
| 1 |
Taipei, N/A
|
|||||
| 1 |
Taiwan
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
h******@AmericanTCB.com
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
SA6
|
||||
| 1 | Equipment Product Code |
G553IBXX
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
D**** L******
|
||||
| 1 | Title |
Manager
|
||||
| 1 | Telephone Number |
886-2********
|
||||
| 1 | Fax Number |
886-8********
|
||||
| 1 |
d******@ecs.com.tw
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
Sporton International Inc.
|
||||
| 1 | Name |
D****** L******
|
||||
| 1 | Physical Address |
No.52, Hwa-Ya 1st Rd.
|
||||
| 1 |
Tao Yuan Hsien, 333
|
|||||
| 1 |
Taiwan
|
|||||
| 1 | Telephone Number |
886-3******** Extension:
|
||||
| 1 | Fax Number |
886-3********
|
||||
| 1 |
D******@sporton.com.tw
|
|||||
| app s | Non Technical Contact | |||||
| 1 | Firm Name |
Sporton International Inc.
|
||||
| 1 | Name |
D**** L********
|
||||
| 1 | Physical Address |
No.52, Hwa-Ya 1st Rd.
|
||||
| 1 |
Tao Yuan Hsien, 333
|
|||||
| 1 |
Taiwan
|
|||||
| 1 | Telephone Number |
886-3******** Extension:
|
||||
| 1 | Fax Number |
886-3********
|
||||
| 1 |
D******@sporton.com.tw
|
|||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DTS - Digital Transmission System | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Notebook PC with 802.11b WLAN | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Power output listed is conducted. The SAR data in this filing is applicable to demonstrate compliance for final host product only as shown in the filing. The antenna(s) used for this transmitter must not be co-located or operate in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance. SAR compliance was evaluated as described in this filing. The highest reported SAR value is 0.29 W/kg. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
Sporton International Inc.
|
||||
| 1 | Name |
W****** H******
|
||||
| 1 | Telephone Number |
886-2******** Extension:
|
||||
| 1 | Fax Number |
886-2********
|
||||
| 1 |
k******@sporton.com.tw
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0390000 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC